Dynamical distribution of continuous service time model involving non-Maxwellian collision kernel and value functions

The distribution of continuous service time in call centers is investigated.A non-Maxwellian collision kernel combining two different value functions in the interaction rule are used to describe the evolution of continuous service time,respectively.Using the statistical mechanical and asymptotic limit methods,Fokker–Planck equations are derived from the corresponding Boltzmann-type equations with non-Maxwellian collision kernels.The steady-state solutions of the Fokker–Planck equation are obtained in exact form.Numerical experiments are provided to support our results under different parameters.

VARIATIONAL ANALYSIS FOR THE MAXIMAL TIME FUNCTION IN NORMED SPACES

For a general normed vector space,a special optimal value function called a maximal time function is considered.This covers the farthest distance function as a special case,and has a close relationship with the smallest enclosing ball problem.Some properties of the maximal time function are proven,including the convexity,the lower semicontinuity,and the exact characterizations of its subdifferential formulas.

Generation of endurance time excitation functions using spectral representation method

In this study,application of the spectral representation method for generation of endurance time excitation functions is introduced.Using this method,the intensifying acceleration time series is generated so that its acceleration response spectrum in any desired time duration is compatible with a time-scaled predefined acceleration response spectrum.For this purpose,simulated stationary acceleration time series is multiplied by the time dependent linear modulation function,then using a simple iterative scheme,it is forced to match a target acceleration response spectrum.It is shown that the generated samples have excellent conformity in low frequency,which is useful for nonlinear endurance time analysis.In the second part of this study,it is shown that this procedure can be extended to generate a set of spatially correlated endurance time excitation functions.This makes it possible to assess the performance of long structures under multi-support seismic excitation using endurance time analysis.

Highly Accurate Golden Section Search Algorithms and Fictitious Time Integration Method for Solving Nonlinear Eigenvalue Problems

This study sets up two new merit functions,which are minimized for the detection of real eigenvalue and complex eigenvalue to address nonlinear eigenvalue problems.For each eigen-parameter the vector variable is solved from a nonhomogeneous linear system obtained by reducing the number of eigen-equation one less,where one of the nonzero components of the eigenvector is normalized to the unit and moves the column containing that component to the right-hand side as a nonzero input vector.1D and 2D golden section search algorithms are employed to minimize the merit functions to locate real and complex eigenvalues.Simultaneously,the real and complex eigenvectors can be computed very accurately.A simpler approach to the nonlinear eigenvalue problems is proposed,which implements a normalization condition for the uniqueness of the eigenvector into the eigenequation directly.The real eigenvalues can be computed by the fictitious time integration method(FTIM),which saves computational costs compared to the one-dimensional golden section search algorithm(1D GSSA).The simpler method is also combined with the Newton iterationmethod,which is convergent very fast.All the proposed methods are easily programmed to compute the eigenvalue and eigenvector with high accuracy and efficiency.

Functional Confirmation Using a Medical X-Ray System of a Semiconductor Survey Meter

In recent years, semiconductor survey meters have been developed and are in increasing demand worldwide. This study determined if it is possible to use the X-ray system installed in each medical facility to calculate the time constant of a semiconductor survey meter and confirm the meter’s function. An additional filter was attached to the medical X-ray system to satisfy the standards of N-60 to N-120, more copper plates were added as needed, and the first and second half-value layers were calculated to enable comparisons of the facility’s X-ray system quality with the N-60 to N-120 quality values. Next, we used a medical X-ray system to measure the leakage dose and calculate the time constant of the survey meter. The functionality of the meter was then checked and compared with the energy characteristics of the meter. The experimental results showed that it was possible to use a medical X-ray system to reproduce the N-60 to N-120 radiation quality values and to calculate the time constant from the measured results, assuming actual leakage dosimetry for that radiation quality. We also found that the calibration factor was equivalent to that of the energy characteristics of the survey meter.

Source time functions of the Gonghe，China earthquake retrieved from long－period digital waveform data using empirical Green＇s function technique

An earthquake of Ms= 6, 9 occurred at the Gonghe, Qinghai Province, China on April 26, 1990. Three larger aftershocks took place at the same region, Ms= 5. 0 on May 7, 1990, Ms= 6. 0 on Jan. 3, 1994 and Ms= 5. 7on Feb. 16, 1994. The long-period recordings of the main shock from China Digital Seismograph Network (CDSN) are deconvolved for the source time functions by the correspondent0 recordings of the three aftershocks asempirical Green's functions (EGFs). No matter which aftershock is taken as EGF, the relative source time functions (RSTFs) Obtained are nearly identical. The RSTFs suggest the Ms= 6. 9 event consists of at least two subevents with approximately equal size whose occurrence times are about 30 s apart, the first one has a duration of 12 s and a rise time of about 5 s, and the second one has a duration of 17 s and a rise time of about & s. COmParing the RSTFs obtained from P- and SH-phases respectively, we notice that those from SH-phases are a slightly more complex than those from p-phases, implying other finer subevents exist during the process of the main shock. It is interesting that the results from the EGF deconvolution of long-Period way form data are in good agreement with the results from the moment tensor inversion and from the EGF deconvolution of broadband waveform data. Additionally, the two larger aftershocks are deconvolved for their RSTFs. The deconvolution results show that the processes of the Ms= 6. 0 event on Jan. 3, 1994 and the Ms= 5. 7 event on Feb. 16,1994 are quite simple, both RSTFs are single impulses.The RSTFs of the Ms= 6. 9 main shock obtained from different stations are noticed to be azimuthally dependent, whose shapes are a slightly different with different stations. However, the RSTFs of the two smaller aftershocks are not azimuthally dependent. The integrations of RSTFs over the processes are quite close to each other, i. e., the scalar seismic moments estimated from different stations are in good agreement. Finally the scalar seismic moments of the three aftershocks are compared. The relative scalar seismic moment Of the three aftershocks deduced from the relative scalar seismic moments of the Ms=6. 9 main shock are very close to those inverted directly from the EGF deconvolution. The relative scalar seismic moment of the Ms =6. 9 main shock calculated using the three aftershocks as EGF are 22 (the Ms= 6. 0 aftershock being EGF), 26 (the Ms= 5. 7 aftershock being EGF) and 66 (the Ms= 5. 5 aftershock being EGF), respectively. Deducingfrom those results, the relative scalar sesimic moments of the Ms= 6. 0 to the Ms= 5. 7 events, the Ms= 6. 0 tothe Ms= 5. 5 events and the Ms= 5. 7 to the Ms= 5. 5 events are 1. 18, 3. 00 and 2. 54, respectively. The correspondent relative scalar seismic moments calculated directly from the waveform recordings are 1. 15, 3. 43, and 3. 05.

Effect of source size and emission time on the p–p momentum correlation function in the two-proton emission process

The effect of source size and emission time on the proton-proton(p-p)momentum correlation function(Cpp(q))has been studied systematically.Assuming a spherical Gaussian source with space and time profile according to the function S(r,t)~exp(-r2/2 r02-t/τ)in the correlation function calculation code(CRAB),the results indicate that one Cpp(q)distribution corresponds to a unique combination of source size r0 and emission timeτ.Considering the possible nuclear deformation from a spherical nucleus,an ellipsoidal Gaussian source characterized by the deformation parameter∈=ΔR/R has been simulated.There is almost no difference of Cpp(q)between the results of spherically and ellipsoidally shaped sources with small deformation.These results indicate that a unique source size r0 and emission time could be extracted from the p-p momentum correlation function,which is especially important for identifying the mechanism of twoproton emission from proton-rich nuclei.Furthermore,considering the possible existence of cluster structures within a nucleus,the double Gaussian source is assumed.The results show that the p-p momentum correlation function for a source with or without cluster structures has large systematical differences with the variance of r0 andτ.This may provide a possible method for experimentally observing the cluster structures in proton-rich nuclei.

Introducing an effective coherence function to generate non-uniform ground motion on topographic site using time-domain boundary element method

In this study,a comprehensive parametric analysis was performed on non-uniform excitation of V-shaped topography using the boundary element method in time domain.For this purpose,wave scattering analysis was carried out on a topography subjected to the SV-wave for different predominant frequencies and shape ratios.Based on the numerical results,new coherence and time delay functions are proposed to generate non-uniform ground motion for topographic irregularities.The efficiency and accuracy of the proposed functions for real engineering problems are indicated by comparison with observations reported in previous literature.

Adaptive Time Frequency Distribution Based on Linear Chirp Modulated Gaussian Functions

We propose a method that uses linear chirp modulated Gaussian functions as the elementary functions, by adaptively adjusting variances, time frequency centers and sweep rates, to decompose signals. By taking WVD, an improved adaptive time frequency distribution is developed, which is non negative, free of cross term interference, and of better time frequency resolution. The paper presents an effective numerical algorithm to estimate the optimal parameters of the basis. Simulations indicate that the proposed approach is effective in analyzing signal's time frequency behavior.

Time function of surface subsidence based on Harris model in mined-out area

The surface subsidence is a common environmental hazard in mined-out area. Based on careful analysis of the regularity of surface subsidence in mined-out area, we proposed a new time function based on Harris curve model in consideration of the shortage of current surface subsidence time functions. By analyzing the characteristics of the new time function, we found that it could meet the dynamic process, the velocity change process and the acceleration change process during surface subsidence. Then its rationality had been verified through project cases. The results show that the proposed time function model can give a good reflection of the regularity of surface subsidence in mined-out area and can accurately predict surface subsidence. And the prediction data of the model are a little greater than measured data on condition of proper measured data quantity, which is safety in the engineering. This model provides a new method for the analysis of surface subsidence in mined-out area and reference for future prediction, and it is valuable to engineering application.

Source time functions of the 1999, Jiji (Chi-Chi) earthquake from GDSN long period waveform data using aftershocks as empirical Green's functions

A large earthquake (Mw=7.6) occurred in Jiji (Chi-Chi), Taiwan, China on September 20, 1999, and was followed by many moderate-size shocks in the following days. Two of the largest aftershocks with the magnitudes of Mw=6.1 and Mw=6.2, respectively, were used as empirical Green's functions (EGFs) to obtain the source time functions (STFs) of the main shock from long-period waveform data of the Global Digital Seismograph Network (GDSN) including IRIS, GEOSCOPE and CDSN. For the Mw=6.1 aftershock of September 22, there were 97 pairs of phases clear enough from 78 recordings of 26 stations; for the Mw=6.2 aftershock of September 25, there were 81 pairs of phases clear enough from 72 recordings of 24 stations. For each station, 2 types of STFs were retrieved, which are called P-STF and S-STF due to being from P and S phases, respectively. Totally, 178 STF individuals were obtained for source-process analysis of the main shock. It was noticed that, in general, STFs from most of the stations had similarities except that those in special azimuths looked different or odd due to the mechanism difference between the main shock and the aftershocks; and in detail, the shapes of the STFs varied with azimuth. Both of them reflected the stability and reliability of the retrieved STFs. The comprehensive analysis of those STFs suggested that this event consisted of two sub-events, the total duration time was about 26 s, and on the average, the second event was about 7 s later than the first one, and the moment-rate amplitude of the first event was about 15% larger than that of the second one.

Functional Time Series Models to Estimate Future Age-Specific Breast Cancer Incidence Rates for Women in Karachi, Pakistan

Background： Breast cancer is the most common female cancer in Pakistan. The incidence of breast cancer in Pakistan is about 2.5 times higher than that in the neighboring countries India and Iran. In Karachi, the most populated city of Pakistan, the age-standardized rate of breast cancer was 69.1 per 100,000 women during 1998-2002, which is the highest recorded rate in Asia. The carcinoma of breast in Pakistan is an enormous public health concern. In this study, we examined the recent trends of breast cancer incidence rates among the women in Karachi. Methods： We obtained the secondary data of breast cancer incidence from various hospitals. They included Jinnah Hospital, KIRAN （Karachi Institute of Radiotherapy and Nuclear Medicine）, and Civil hospital, where the data were available for the years 2004-2011. A total of 5331 new cases of female breast cancer were registered during this period. We analyzed the data in 5-year age groups 15-19, 20-24, 25-29, 30-34, 35-39, 40-44, 45-49, 50-54, 55-59, 60-64, 65-69, 70-74, 75＋. Nonparametric smoothing were used to obtained age-specific incidence curves, and then the curves are decomposed using principal components analysis to fit FTS （functional time series） model. We then used exponential smoothing statspace models to estimate the forecasts of incidence curve and construct prediction intervals. Results： The breast cancer incidence rates in Karachi increased with age for all available years. The rates increased monotonically and are relatively sharp with the age from 15 years to 50 years and then they show variability after the age of 50 years. 10-year forecasts for the female breast cancer incidence rates in Karachi show that the future rates are expected to remain stable for the age-groups 15-50 years, but they will increase for the females of 50-years and over. Hence in future, the newly diagnosed breast cancer cases in the older women in Karachi are expected to increase. Conclusion： Prediction of age related changes in breast cancer incidence rates will provide useful information for controlling the overall burden of cancer in Pakistan and also serve as a resource for health planning in future research. Moreover, these models will be the most useful for modeling and projecting future trends of other cancers and chronic diseases.

The Application of Multiquadric Function Fitting to Borehole Strain Time Series Data Processing

Based on the existing continuous borehole strain observation,the multiquadric function fitting method was used to deal with time series data. The impact of difference kernel function parameters was discussed to obtain a valuable fitting result,from which the physical connotation of the original data and its possible applications were analyzed.Meanwhile,a brief comparison was made between the results of multiquadric function fitting and polynomial fitting.

REPRESENTATION OF ADDITIVE FUNCTIONALS AND LOCAL TIMES FOR JUMP MARKOV PROCESSES AND THEIR FUNCTIONAL LIMIT THEOREM

The representation of additive functionals and local times for jump Markov processes are obtained. The results of uniformly functional moderate deviation and their applications to birth-death processes are also presented.

Fast Evaluation of Time-Domain Green Function for Finite Water Depth

For computation of large amplitude motions of ships fastened to a dock, a fast evaluation scheme is implemented for computation of the time-domain Green function for finite water depth. Based on accurate evaluation of the Green function directly, a fast approximation method for the Green function is developed by use of Chebyshev polynomials. Examinations are carried out of the accuracy of the Green function and its derivatives from the scheme. It is shown that when an appropriate number of polynomial terms are used, very accurate approximation can be obtained.

Simulation study of the effects of time delay on the correlation function of a bistable system with correlated noises

The effects of time delay on the fluctuation properties of a bistable system are investigated by simulating its normalised correlation function C（s）. Three cases including linear delay, cubic delay and global delay in the system are considered respectively. The simulation results indicate that the linear delay enhances the fluctuation of the system （reduces the stability of the system） while the cubic delay and global delay weaken it （enforce the stability of the system）, and the effect of cubic delay is more pronounced than the linear delay and global delay.

Quadratic Lyapunov Function and Exponential Dichotomy on Time Scales

In this paper, we study the relationship between exponential dichotomy and quadratic Lyapunov function for the linear equation x△=A（t）x on time scales. Moreover, for the nonlinear perturbed equation x△= A（t）x ＋ f（t, x） we give the instability of the zero solution when f is sufficiently small.

Source parameters determination for earthquakes in Kushiro,Japan considering source time function

This paper applies a new formulation to do moment tensor inversion for earthquakes in the Kushiro area of Japan. Comparing with conventional moment tensor inversion method, the new one takes the effect of source time function into consideration. For the inversion, best solution is obtained by minimizing the difference between the observed seismograms and the synthetic ones. And the best-fitting focal depth is determined from the variance reduction. The results indicate that half duration of source time function is proportional to the magnitude of earthquakes. Large earthquakes have long half duration, whereas that of moderate-small earthquakes is comparatively shorter. The focal mechanisms of all three earthquakes are of thrust fault type, which is mainly ascribed to the collision of the North American plate with the Eurasia plate in the late Cretaceous or Paleogene.

Time Slice Analysis Method Based on OTCA Used in fMRI Weak Signal Function Extraction

The original temporal clustering analysis (OTCA) is an effective technique for obtaining brain activation maps when the timing and location of the activation are completely unknown, but its deficiency of sensitivity is exposed in processing brain activation signal which is relatively weak. The time slice analysis method based on OTCA is proposed considering the weakness of the functional magnetic resonance imaging (fMRI) signal of the rat model. By dividing the stimulation period into several time slices and analyzing each slice to detect the activated pixels respectively after the background removal, the sensitivity is significantly improved. The inhibitory response in the hypothalamus after glucose loading is detected successfully with this method in the experiment on rat. Combined with the OTCA method, the time slice analysis method based on OTCA is effective on detecting when, where and which type of response will happen after stimulation, even if the fMRI signal is weak.

Empirical orthogonal function analysis of short time series of sectional data in the tropical western Pacific

In this paper,some short time series of pnserved data pm sectopm 18°20′N in the tropical western Pacificwere reorganized to give mixed depth-time series,and processed by means of means of empirical orthogonal fonction analysis. It is indicated that the original form of element distribution could be obtained by linear combination of several main canonical distribution functions, and the intrinsic structure of element distribution on a certain section and its variation propertiescould be reveled by canonical distribution function and profiles in corresponding periods.