A micromechanics analysis on the possibility of designing a two-phase pseudoelastic composite is made for the case where ductile transformable shape mem- ory alloy plastic particles are imbedded coherently in an elast...A micromechanics analysis on the possibility of designing a two-phase pseudoelastic composite is made for the case where ductile transformable shape mem- ory alloy plastic particles are imbedded coherently in an elastic matrix. It is demon- strated that a pseudoelastic stress-strain loop in a macroscopic loading-unloading cy- cle can be obtained by microscopically stress induced forward and reverse martensitic transformations in the SMA particles. The relation between the macroscopic stress- strain response and the material parameters of the constituents of this composite is quantified through the micromechanics calculations, which reveals that the best duc- tility and thus the greatest energy absorption capacity of this novel microstructure can be obtained by the optimum material design.展开更多
According to the Bruggeman theory and Maxwell-Garnett theory, the effective dielectric constant of a two-phase random composite with an interfacial shell is presented. The nonlinearity of the theory is obvious. Especi...According to the Bruggeman theory and Maxwell-Garnett theory, the effective dielectric constant of a two-phase random composite with an interfacial shell is presented. The nonlinearity of the theory is obvious. Especially, the theory is suited to study the dielectric properties of two-phase random composites with a spherical interfacial shell. The theoretical results on dielectric properties of polystyrene-barium titanate composites with an interfacial shell are in good agreement with experimental data.展开更多
The samples ofLa8/9Sr1/45Na4/45MnO3 （LSNMO）/x/2（Sb2O3） were prepared by the solid-state reaction method. The electric transport properties and the temperature stabil-ity of magnetoresistance （MR） of the samples ...The samples ofLa8/9Sr1/45Na4/45MnO3 （LSNMO）/x/2（Sb2O3） were prepared by the solid-state reaction method. The electric transport properties and the temperature stabil-ity of magnetoresistance （MR） of the samples were studied through the measurements of X-ray diffraction patterns, resistivity-temperature （ρ-T） curves, mass magnetization-temperature （σ-T） curves, and magnetoresistance-temper-ature （MR-T） curves. The results indicate that the p-Tcurves of the original material LSNMO show two peaks, and the phenomenon of two peaks of ρ-T curves disappears for the composite samples, which can be explained by a competition between surface-phase resistivity induced by boundary-dependent scattering and body-phase resistivity induced by paramagnetism-ferromagnetism transition. For all the sam-ples in the low temperature range, MR increases continu-ously with the decrease of temperature, which shows a characteristic of low-field magnetoresistance. However, MR basically keeps the same in the high temperature range. The paramagnetism-ferromagnetism transition is observed in the high temperature range due to a composite between perov-skite manganite and insulator, which can enhance the tem-perature of MR appearance in the high temperature range and make it to appear near room temperature. For the sample with x = 0.12, MR remains constant at the value of 7.5 % in the temperature range of 300-260 K, which achieves a tem-perature stability of MR near room temperature. In addition,for the sample with x = 0.16, MR is above 6.8 % in the high temperature range of 318-252 K （△T = 66 K）. MR almost remains constant in this temperature range, which favors the practical application of MR.展开更多
La0.5Sm0.2Sr0.3MnO3/（Ag2O）x/2 （x = 0.00, 0.04, 0.08, 0.25, 0.30） samples were prepared by the solid-state reaction method, and their transport behaviors, transport mechanism, and magnetoresistance effect were stud...La0.5Sm0.2Sr0.3MnO3/（Ag2O）x/2 （x = 0.00, 0.04, 0.08, 0.25, 0.30） samples were prepared by the solid-state reaction method, and their transport behaviors, transport mechanism, and magnetoresistance effect were studied through the measurement and fitting of p-T curves. The results show that the element Ag takes part in reaction when the doping amount is small. Ag is mainly distributed at the grain boundary of the host material and is in metallic state when the doping amount is relatively large; then the system becomes a two-phase composite. A small amount of Ag doping can apparently increase grain-boundary magnetoresistance induced by the spin-dependent scattering. The resistivity of the sample doped with 30 mol% Ag is one order of magnitude smaller than that of low-doped samples, and its magnetoresistance in the magnetic field of 0.5 T and at 300 K is strengthened apparently reaching 9.4%, which is connected not only with the improvement of the grain-boundary structure of the host material but also with the decrease of material resistivity.展开更多
The samples of La0.6Dy0.1Sr0.3MnO3/（Ag2O）x/2（x = 0.00, 0.02, 0.04, 0.06, 0.08, 0.10, 0.20, 0.25, and 0.30） were prepared by using the solid-state reaction method.Their magnetic property, transport behavior, transp...The samples of La0.6Dy0.1Sr0.3MnO3/（Ag2O）x/2（x = 0.00, 0.02, 0.04, 0.06, 0.08, 0.10, 0.20, 0.25, and 0.30） were prepared by using the solid-state reaction method.Their magnetic property, transport behavior, transport mechanism and magnetoresistance effect were studied through the measurements of magnetization-temperature（M-T） curves, ρ-T curves and the fitting of ρ-T curves.The results indicated that Ag could take part in the reaction when the doping amount is small.However, when the doping amount is comparatively large, Ag as metallic state mainly deposits on the grain boundary of La0.6Dy0.1Sr0.3MnO3, and then the system forms a two-phase composite.When the Ag doping amount is 30% mole ratio, the resistivity of the sample is one order of magnitude smaller than that of low doped samples, and its peak of magnetoresistance at 292 K and in the magnetic field of 0.2 T strengthens apparently and reaches 16.3%, which is over 7 times as large as 2.2% of La0.6Dy0.1Sr0.3MnO3.The two-phase composite system of magnetoresistance based on perovskite manganite consists of two parts：intrinsic magnetoresistance and extrinsic magnetoresistance.However, extrinsic magnetoresistance comes from spin-dependent scattering（SDS） and spin-polarized tunneling（SPT）.Magnetoresistance near TC increases due to the contribution of intrinsic magnetoresistance and extrinsic magnetoresistance formed by SDS, and magnetoresistance at low temperature is extrinsic magnetoresistance formed by SPT.展开更多
Li-and Mn-rich(LMR)cathode materials have received tremendous attention due to the highly reversible specific capacity(>250 m Ah·g^(-1)).In the analysis of its crystal structure,the two-phase composite model g...Li-and Mn-rich(LMR)cathode materials have received tremendous attention due to the highly reversible specific capacity(>250 m Ah·g^(-1)).In the analysis of its crystal structure,the two-phase composite model gains increasing acceptance,and the phase transition behaviors in LMR cathode materials have been extensively studied.Herein,the structure controversy of LMR cathode materials,and the mechanisms of phase transition are summarized.Particularly,the causes of initiating or accelerating the phase transition of LMR cathode materials have been summarized into three main driving forces,i.e.,the electrochemical driving force,the component driving force and the thermodynamic driving force.Additionally,the applications of phase transition behavior in improving the electrochemical performance of LMR cathode materials,including the construction of spinel surface coating and spinel/layered hetero-structure are discussed.展开更多
The samples of La0.80Sr0.15Ag0.05MnO3/x（CuO） （x = 0, 0.05, 0.10, 0.15, 0.20） were prepared by the solid-state reaction method, and the structure of the sampies was detected by X-ray diffraction （XRD）, scanning e...The samples of La0.80Sr0.15Ag0.05MnO3/x（CuO） （x = 0, 0.05, 0.10, 0.15, 0.20） were prepared by the solid-state reaction method, and the structure of the sampies was detected by X-ray diffraction （XRD）, scanning electron microscope （SEM） equipped with energy dispersive spectroscopy （EDS）, electric transport mechanism, and magnetoresistance enhancement, and the temperature stability of magnetoresistance of the samples was studied through resistivity-temperature （ρ-T） curves, ρ-T fitted curves, and magnetoresistance-temperature （MR-T） curves. The results indicate that ρ-T data can be fitted by the formula ρ = ρ0 ＋ AT^2 very well, and the electric transport mechanism of all the samples in metal-like area is the scattering of single magneton upon spin electron; the magnetoresistance of composite samples is far larger than that of the original material, and the MR peak value of the sample with x = 0.20 is nearly 4 times as large as that of the sample with x = 0; composite samples have comparatively good temperature stability of magnetoresistance in the temperature range of 200-260 K, and the magnetoresistance of the sample with x = 0.15 almost does not change with temperature and keeps at （5.03 ± 0.20） % in the temperature range of 210-260 K.展开更多
We consider the multi-scale modeling of the isothermal chemical vapor infiltration (CVI) process for the fabrication of C/SiC composites. We first present a microscopic model in which the preform is regarded as a two-...We consider the multi-scale modeling of the isothermal chemical vapor infiltration (CVI) process for the fabrication of C/SiC composites. We first present a microscopic model in which the preform is regarded as a two-phase porous media describedby a dynamic pore-scale node-bond network during the fabrication process. We thendevelop a macroscopic model by a upscaling procedure based on the homogenizationtheory.展开更多
文摘A micromechanics analysis on the possibility of designing a two-phase pseudoelastic composite is made for the case where ductile transformable shape mem- ory alloy plastic particles are imbedded coherently in an elastic matrix. It is demon- strated that a pseudoelastic stress-strain loop in a macroscopic loading-unloading cy- cle can be obtained by microscopically stress induced forward and reverse martensitic transformations in the SMA particles. The relation between the macroscopic stress- strain response and the material parameters of the constituents of this composite is quantified through the micromechanics calculations, which reveals that the best duc- tility and thus the greatest energy absorption capacity of this novel microstructure can be obtained by the optimum material design.
文摘According to the Bruggeman theory and Maxwell-Garnett theory, the effective dielectric constant of a two-phase random composite with an interfacial shell is presented. The nonlinearity of the theory is obvious. Especially, the theory is suited to study the dielectric properties of two-phase random composites with a spherical interfacial shell. The theoretical results on dielectric properties of polystyrene-barium titanate composites with an interfacial shell are in good agreement with experimental data.
基金supported by the National Natural Foundation of China (No. 19934003) the Natural Science Research Key Program of Anhui Educational Committee (No. KJ2011A259)+3 种基金the Opening Program of Cultivating Base of Anhui Key Laboratory of Spintronics and Nanomaterials (Nos. 2010YKF04 2011YKF05)the Professors’and Doctors’Research Startup Foundation of Suzhou University (Nos. 2011jb01 2011jb02)
基金financially supported by the National Natural Science Foundation of China(No.19934003)the Natural Science Foundation of the Education Bureau of Anhui Province,China(Nos.KJ2011A259 and KJ2012Z404)+1 种基金Anhui Key Laboratory of Spintronics and Nano-materials Program(Nos.2010YKF01 and 2010YKF04)the Professors’and Doctors’ Research Startup Foundation of Suzhou University(Nos.2011jb01 and 2010jb02)
文摘The samples ofLa8/9Sr1/45Na4/45MnO3 （LSNMO）/x/2（Sb2O3） were prepared by the solid-state reaction method. The electric transport properties and the temperature stabil-ity of magnetoresistance （MR） of the samples were studied through the measurements of X-ray diffraction patterns, resistivity-temperature （ρ-T） curves, mass magnetization-temperature （σ-T） curves, and magnetoresistance-temper-ature （MR-T） curves. The results indicate that the p-Tcurves of the original material LSNMO show two peaks, and the phenomenon of two peaks of ρ-T curves disappears for the composite samples, which can be explained by a competition between surface-phase resistivity induced by boundary-dependent scattering and body-phase resistivity induced by paramagnetism-ferromagnetism transition. For all the sam-ples in the low temperature range, MR increases continu-ously with the decrease of temperature, which shows a characteristic of low-field magnetoresistance. However, MR basically keeps the same in the high temperature range. The paramagnetism-ferromagnetism transition is observed in the high temperature range due to a composite between perov-skite manganite and insulator, which can enhance the tem-perature of MR appearance in the high temperature range and make it to appear near room temperature. For the sample with x = 0.12, MR remains constant at the value of 7.5 % in the temperature range of 300-260 K, which achieves a tem-perature stability of MR near room temperature. In addition,for the sample with x = 0.16, MR is above 6.8 % in the high temperature range of 318-252 K （△T = 66 K）. MR almost remains constant in this temperature range, which favors the practical application of MR.
基金supported by the Key Program of the National Natural Science Foundation of China (No. 19934003)the Grand Program of Natural Science Research of Anhui Education Department (No. ZD2007003-1)the Natural Science Research Program of Universities and Colleges of Anhui Province, China (Nos. KJ2008A19ZC, KJ2009B281Z, and KJ2009A053Z)
文摘La0.5Sm0.2Sr0.3MnO3/（Ag2O）x/2 （x = 0.00, 0.04, 0.08, 0.25, 0.30） samples were prepared by the solid-state reaction method, and their transport behaviors, transport mechanism, and magnetoresistance effect were studied through the measurement and fitting of p-T curves. The results show that the element Ag takes part in reaction when the doping amount is small. Ag is mainly distributed at the grain boundary of the host material and is in metallic state when the doping amount is relatively large; then the system becomes a two-phase composite. A small amount of Ag doping can apparently increase grain-boundary magnetoresistance induced by the spin-dependent scattering. The resistivity of the sample doped with 30 mol% Ag is one order of magnitude smaller than that of low-doped samples, and its magnetoresistance in the magnetic field of 0.5 T and at 300 K is strengthened apparently reaching 9.4%, which is connected not only with the improvement of the grain-boundary structure of the host material but also with the decrease of material resistivity.
基金supported by the Key Program of the National Natural Science Foundation of China (No. 19934003)the Grand Program of Natural Science Research of Anhui Education Department (No. ZD2007003-1)+1 种基金the Natural Science Research Program of Universities and Colleges of Anhui Province, China (No. KJ2008A34ZC No. KJ2009A053Z)
文摘The samples of La0.6Dy0.1Sr0.3MnO3/（Ag2O）x/2（x = 0.00, 0.02, 0.04, 0.06, 0.08, 0.10, 0.20, 0.25, and 0.30） were prepared by using the solid-state reaction method.Their magnetic property, transport behavior, transport mechanism and magnetoresistance effect were studied through the measurements of magnetization-temperature（M-T） curves, ρ-T curves and the fitting of ρ-T curves.The results indicated that Ag could take part in the reaction when the doping amount is small.However, when the doping amount is comparatively large, Ag as metallic state mainly deposits on the grain boundary of La0.6Dy0.1Sr0.3MnO3, and then the system forms a two-phase composite.When the Ag doping amount is 30% mole ratio, the resistivity of the sample is one order of magnitude smaller than that of low doped samples, and its peak of magnetoresistance at 292 K and in the magnetic field of 0.2 T strengthens apparently and reaches 16.3%, which is over 7 times as large as 2.2% of La0.6Dy0.1Sr0.3MnO3.The two-phase composite system of magnetoresistance based on perovskite manganite consists of two parts：intrinsic magnetoresistance and extrinsic magnetoresistance.However, extrinsic magnetoresistance comes from spin-dependent scattering（SDS） and spin-polarized tunneling（SPT）.Magnetoresistance near TC increases due to the contribution of intrinsic magnetoresistance and extrinsic magnetoresistance formed by SDS, and magnetoresistance at low temperature is extrinsic magnetoresistance formed by SPT.
基金the Natural Science Foundation of Fujian Province of China(Nos.2019J06003 and 2020J05014)the National Natural Science Foundation of China(Nos.51931006 and 51871188)+4 种基金the National Key R&D Program of China(No.2016YFA0202602)Guangdong Basic and Applied Basic Research Foundation(Nos.2021A1515010139 and 2019A1515011070)the Science and Technology Planning Projects of Fujian Province,China(No.2020H0005)the Fundamental Research Funds for the Central Universities of China(Nos.20720200068 and 20720190013)the“Double-First Class”Foundation of Materials Intelligent Manufacturing Discipline of Xiamen University。
文摘Li-and Mn-rich(LMR)cathode materials have received tremendous attention due to the highly reversible specific capacity(>250 m Ah·g^(-1)).In the analysis of its crystal structure,the two-phase composite model gains increasing acceptance,and the phase transition behaviors in LMR cathode materials have been extensively studied.Herein,the structure controversy of LMR cathode materials,and the mechanisms of phase transition are summarized.Particularly,the causes of initiating or accelerating the phase transition of LMR cathode materials have been summarized into three main driving forces,i.e.,the electrochemical driving force,the component driving force and the thermodynamic driving force.Additionally,the applications of phase transition behavior in improving the electrochemical performance of LMR cathode materials,including the construction of spinel surface coating and spinel/layered hetero-structure are discussed.
基金financially supported by the Key Program of National Natural Science Foundation of China(No.19934003)the Program of Natural Science Foundation of Anhui Province(No.1308085MA11)+1 种基金the Key Programs of Natural Science Research of Anhui Education Department(Nos.KJ2013A245 and KJ2012Z404)the Open Projects of Anhui Key Laboratory of Spintronic and Nanometric Materials(Nos.2012YKF09,2012YKF10,and 2012YKF08)
文摘The samples of La0.80Sr0.15Ag0.05MnO3/x（CuO） （x = 0, 0.05, 0.10, 0.15, 0.20） were prepared by the solid-state reaction method, and the structure of the sampies was detected by X-ray diffraction （XRD）, scanning electron microscope （SEM） equipped with energy dispersive spectroscopy （EDS）, electric transport mechanism, and magnetoresistance enhancement, and the temperature stability of magnetoresistance of the samples was studied through resistivity-temperature （ρ-T） curves, ρ-T fitted curves, and magnetoresistance-temperature （MR-T） curves. The results indicate that ρ-T data can be fitted by the formula ρ = ρ0 ＋ AT^2 very well, and the electric transport mechanism of all the samples in metal-like area is the scattering of single magneton upon spin electron; the magnetoresistance of composite samples is far larger than that of the original material, and the MR peak value of the sample with x = 0.20 is nearly 4 times as large as that of the sample with x = 0; composite samples have comparatively good temperature stability of magnetoresistance in the temperature range of 200-260 K, and the magnetoresistance of the sample with x = 0.15 almost does not change with temperature and keeps at （5.03 ± 0.20） % in the temperature range of 210-260 K.
基金The work of Yue is supported in part by NSF of China under the grant 10871190 and the National Basic Research Program under the Grant 2005CB321704The work of Zeng is supported in part by Flying Star Program of Northwestern Polytechnical University and NSF of China under the Grant 50802076.
文摘We consider the multi-scale modeling of the isothermal chemical vapor infiltration (CVI) process for the fabrication of C/SiC composites. We first present a microscopic model in which the preform is regarded as a two-phase porous media describedby a dynamic pore-scale node-bond network during the fabrication process. We thendevelop a macroscopic model by a upscaling procedure based on the homogenizationtheory.
