Effects of Atomic Coherence and Injected Classical Field on Chaotic Dynamics of Non-degenerate Cascade Two-Photon Lasers

Based on the cascade two-photon laser dynamic equation derived with the technique of quantum Langevin operators with the considerations of coherently prepared three-level atoms and the classical field injected into the cavity, we numerically study the effects of atomic coherence and classical field on the chaotic dynamics of a two-photon laser. Lyapunov exponent and bifurcation diagram calculations show that the Lorenz chaos and hyperchaos can be induced or inhibited by the atomic coherence and the classical field via crisis or Hopf bifurcations.

Dynamic Equations and Nonlinear Dynamics of Cascade Two-Photon Laser

We derive equations and study nonlinear dynamics of cascade two-photon laser, in which the electromagnetic field in the cavity is driven by coherently prepared three-level atoms and classical field injected into the cavity. The, dynamic equations of such a system are derived by using the technique of quantum Laugevin opera.tots, and then arre studied numerically under different driving＂ conditions, The results show that trader certain conditions the cascade twophoton laser can generate chaotic, period doubling, periodic populations, atomic coherences, and injected classical field, stable and bistable states. Chaos can be inhibited by atomic In ,addition, no chaos occurs in optical bista.bility.

Dynamics of Two-Photon Lasers with A Atomic Level Configuration

We derive the dimensionless dynamic equations of two-photon lasers with A atomic level configuration by using the quantum Langevin equation method with the considerations of atomic coherence and injected classical fields. Then we analyze the stability and the chaotic dynamics of the two-photon laser by calculating the bifurcation diagram and the maximum Lyapunov exponent （MLE）. Our results show that the Lorenz strange attractors and one-focus strange attractors can exist in this system, and the chaos can be induced or inhibited by the injected classical fields via Hopfbifurcations or crises, while the atomic coherence induces chaos via crises, and inhibit chaos via Hopf bifurcation or crises.

Influence of laser shock peening on microstructure and high-temperature oxidation resistance of Ti45Al8Nb alloy fabricated via laser melting deposition

Laser shock peening(LSP)was used to enhance the high-temperature oxidation resistance of laser melting deposited Ti45Al8Nb alloy.The microstructure and high-temperature oxidation behavior of the as-deposited Ti45Al8Nb alloy before and after LSP were investigated by scanning electron microscopy,X-ray diffraction,and electron backscatter diffraction.The results indicated that the rate of mass gain in the as-deposited sample after LSP exhibited a decrease when exposed to an oxidation temperature of 900℃,implying that LSP-treated samples exhibited superior oxidation resistance at high temperatures.A gradient structure with a fine-grain layer,a deformed-grain layer,and a coarse-grain layer was formed in the LSP-treated sample,which facilitated the diffusion of the Al atom during oxidation,leading to the formation of a dense Al_(2)O_(3)layer on the surface.The mechanism of improvement in the oxidation resistance of the as-deposited Ti45Al8Nb alloy via LSP was discussed.

Laser‑Induced Highly Stable Conductive Hydrogels for Robust Bioelectronics

Despite the promising progress in conductive hydrogels made with pure conducting polymer,great challenges remain in the interface adhesion and robustness in longterm monitoring.To address these challenges,Prof.Seung Hwan Ko and Taek-Soo Kim’s team introduced a laserinduced phase separation and adhesion method for fabricating conductive hydrogels consisting of pure poly(3,4-ethylenedioxythiophene):polystyrene sulfonate on polymer substrates.The laser-induced phase separation and adhesion treated conducting polymers can be selectively transformed into conductive hydrogels that exhibit wet conductivities of 101.4 S cm^(−1) with a spatial resolution down to 5μm.Moreover,they maintain impedance and charge-storage capacity even after 1 h of sonication.The micropatterned electrode arrays demonstrate their potential in long-term in vivo signal recordings,highlighting their promising role in the field of bioelectronics.

Microstructure and Wear/corrosion Resistance of Stainless Steel Laser-alloyed with Mn+W_(2)C, Mn+NiWC and Mn+SiC

In-situ formed high Mn steel coating reinforced by carbides was formed by laser surface alloying(LSA).Laser alloyed layers on 1Cr18Ni9Ti steel with Mn+W_(2)C(specimen A),Mn+NiWC(specimen B)and Mn+SiC(specimen C)powders were fabricated to improve the wear and corrosion behavior of 1Cr18Ni9Ti steel blades in high speed mixers.Microstructure evolution,phases,element distribution,microhardness,wear and corrosion behavior of the laser alloyed layers were investigated.Results indicated that high Mn steel matrix composites with undissolved W_(2)C,WC and other in-situ formed carbides were formed by LSA with Mn+W_(2)C and Mn+NiWC while SiC totally dissolved into the high Mn matrix when adding Mn+SiC.Ni as the binding phase in Ni-WC powder decreased the crack sensitivity of the alloyed layer as compared with the addition of W_(2)C powder.An improvement in average microhardness was achieved in the matrix in specimen A,B and C,with the value of 615,602 and 277 HV_(0.5),while that of the substrate was 212 HV_(0.5).The increase of microhardness,wear and corrosion resistance is highly corelated to microstructure,formed phases,type and content of carbides,micro-hardness and toughness of the alloyed layers.

Corrosion resistance and antibacterial properties of Ti−3Cu alloy prepared by selective laser melting

The corrosion resistance and antibacterial properties of Ti−3Cu alloy prepared by selective laser melting were evaluated using electrochemical experiments and a variety of antibacterial characterization.It is found that the charge transfer resistance of Ti−3Cu alloy was 4.89×10^(5)Ω∙cm^(2),which was doubled the data obtained by CP-Ti alloy.The antibacterial rates of Ti−3Cu alloy against S.mutans and P.gingivalis were 45.0%and 54.5%.And the antibacterial rates increased with the prolongation of cultivation time,reaching up to 62.8%and 68.6%,respectively.The in-situ nano Ti_(2)Cu precipitates were homogeneously distributed in the matrix of the Ti−3Cu alloy,which was the key reason of increasing the corrosion resistance.Additionally,the microscale electric fields between theα-Ti matrix and the Ti_(2)Cu was responsible for the enhancement of the antibacterial properties.

Two-plasmon-decay instability stimulated by dual laser beams in inertial confinement fusion

Two-plasmon-decay instability(TPD)poses a critical target preheating risk in direct-drive inertial confinement fusion.In this paper,TPD collectively driven by dual laser beams consisting of a normal-incidence laser beam(Beam-N)and a large-angle-incidence laser beam(Beam-L)is investigated via particle-in-cell simulations.It is found that significant TPD growth can develop in this regime at previously unexpected low laser intensities if the intensity of Beam-L exceeds the large-angle-incidence threshold.Both beams contribute to the growth of TPD in a“seed-amplification”manner in which the absolute instability driven by Beam-L provides the seeds that are convectively amplified by Beam-N,making TPD energetically important and causing significant pump depletion and hot-electron generation.

High peak power mini-array quantum cascade lasers operating in pulsed mode

Broad area quantum cascade lasers(BA QCLs)have significant applications in many areas,but suffer from demanding pulse operating conditions and poor beam quality due to heat accumulation and generation of high order modes.A structure of mini-array is adopted to improve the heat dissipation capacity and beam quality of BA QCLs.The active region is etched to form a multi-emitter and the channels are filled with In P:Fe,which acts as a lateral heat dissipation channel to improve the lateral heat dissipation efficiency.A device withλ~4.8μm,a peak output power of 122 W at 1.2%duty cycle with a pulse of 1.5μs is obtained in room temperature,with far-field single-lobed distribution.This result allows BA QCLs to obtain high peak power at wider pump pulse widths and higher duty cycle conditions,promotes the application of the mid-infrared laser operating in pulsed mode in th e field of standoff photoacoustic chemical detection,space optical communication,and so on.

Can laser irradiation improve the strength of weak rock mass?

Controllable rock cracking technology is crucial for the exploration and exploitation of deep underground resources.Many existing studies have been dedicated to the laser-assisted rock-weakening technology.It has been proved that laser irradiation can improve drilling and blasting efficiency when combined with mechanical rock fracturing methods,which are irrelevant for borehole stabilization.To improve the latter,this study used laser ablation for borehole reinforcement.The high-power laser was applied to typical rock samples(sandstone,mudstone and coal)in both dry and saturated conditions.Multi-technique observations and measurements were used to fully understand the peculiar modifications of the specimens under laser treatment,i.e.mechanical loading,acoustic emission(AE)monitoring,digital image correlation(DIC)strain field evaluation,infrared thermography(IRT)monitoring and X-ray computed tomography(CT)scanning.The results showed that,in addition to the effects already demonstrated,laser irradiation can improve the strength of the soft rock,especially in the saturated state.The process involved a complicated phase change including melting and evaporation of the matrix under high-temperature and high-pressure to form a glassy high strength silicate material.This process is similar to the reaction between molten lava and water,or the impact of an asteroid on the earth.Inspired by the results,a conceptual path for a new borehole stabilization technology using laser ablation was outlined.

Review of rare earth oxide doping-modified laser cladding of Fe-based alloy coatings

Conventional Fe-C alloy parts used in mechanical transmission and braking systems exposed to the external environment often suffer from wear and corrosion failures.Surface coating strengthening technologies have been explored to improve the surface performance and prolong service life of these parts.Among these technologies,laser cladding has shown promise in producing Fe-based alloy coatings with superior interfacial bonding properties to the Fe-C alloy substrate.Additionally,the microstructure of the Fe-based alloy coating is more uniform and the grain size is finer than that of surfacing welding,thermal spraying,and plasma cladding,and the oxide film of alloying elements on the coating surface can improve the coating performance.However,Fe-based alloy coatings produced by laser cladding typically exhibit lower hardness,lower wear resistance,corrosion resistance,and oxidation resistance compared to coatings based on Co and Ni alloys.Moreover,these coatings are susceptible to defects such as pores and cracks.To address these limitations,the incorporation of rare-earth oxides through doping in the laser cladding process has garnered significant attention.This approach has demonstrated substantial improvements in the microstructure and properties of Fe-based alloy coatings.This paper reviewed recent research on the structure and properties of laser-cladded Fe-based alloy coatings doped with various rare earth oxides,including La_(2)O_(3),CeO_(2),and Y_(2)O_(3).Specifically,it discussed the effects of rare earth oxides and their concentrations on the structure,hardness,friction,wear,corrosion,and oxidation characteristics of these coatings.Furthermore,the mechanisms by which rare earth oxides influence the coating’s structure and properties were summarized.This review aimed to serve as a valuable reference for the application and advancement of laser cladding technology for rare earth modified Fe-based alloy coatings.

Effect of Bi/Si Ratio of BiBSi Glass on Its Structure, Properties and Laser Sealing Shear Strength for Vacuum Glazing

The low-melting glass of Bi2O_(3)-B2O_(3)-SiO_(2)(BiBSi)system was used for the first time for laser sealing of vacuum glazing.Under the condition of constant boron content,how the structure and properties vary with Bi/Si ratio in low-melting glass was investigated.In addition,the relationships between laser power,low-melting glass solder with different Bi/Si ratios and laser sealing shear strength were revealed.The results show that a decrease in the Bi/Si ratio can cause a contraction of the glass network of the low-melting glass,leading to an increase of its characteristic temperature and a decrease of its coefficient of thermal expansion.During laser sealing,the copper ions in the low-melting glass play an endothermic role.A change in the Bi/Si ratio will affect the valence state transition of the copper ions in the low-melting glass.The absorbance of the low-melting glass does not follow the expected correlation with the Bi/Si ratio,but shows a linear correlation with the content of divalent copper ions.The greater the concentration of divalent copper ions,the greater the absorbance of the low-melting glass,and the lower the laser power required for laser sealing.The shear strength of the low melting glass solder after laser sealing was tested,and it was found that the maximum shear strength of Z1 glass sample was the highest up to 2.67 MPa.

Significant improvement of machinability of C_(f)/SiC composites through matching laser scanning spacing and abrasive belt grain size

To improve the application and service of C_(f)/SiC composites as advanced hightemperature structural materials,it is critical to achieve their high-efficiency and low-damage machining.In this study,the laser-ablating assisted grinding(LAAG)method was presented,and the connection of damage behavior and removal mechanism with laser and grinding processes was revealed.The results demonstrated that the surface of C_(f)/SiC composites after laser ablation was covered with a substantial number of loose oxides primarily composed of SiO2.Laser ablating process,grinding parameter and abrasive belt selection have a significant impact on the machining results.By fabricating an ablative layer with small laser scanning spacing,and selecting small abrasive grains and feed rate during grinding,the machinability was improved and a relatively lowerdamage grinding surface could be obtained.Under the optimal combination of process parameters,the grinding force and temperature of LAAG could be reduced by up to 85%and 35%,respectively.In this case,the subsurface damage of C_(f)/SiC composites occurred only in the form of microcracks rather large-scale fracture,and the formation of interface debonding and matrix cracking was significantly reduced.Furthermore,the grinding chips were mostly shown as micron-sized powders,indicating that the removal mechanism of C_(f)/SiC composites was primarily the microfractured and attrition wear of laser-ablated layer.

Combined anisotropic and cyclic constitutive model for laser powder bed fusion fabricated aluminum alloy

This study presents new methods to effectively model the anisotropic yielding and hardening behavior of laser powder bed fusion fabricated aluminum alloy under both monotonic and cyclic loading conditions.The proposed model combines the yield surface-interpolation method to accurately describe the anisotropic hardening rates in various directions,with the Chaboche kinematic hardening rule to precisely reflect the cyclic characteristics.For numerical implementation of the combined anisotropic and cyclic constitutive model,a fully implicit stress integration algorithm based on return mapping method is provided.Moreover,the multiple parameters associated with the model are categorized and identified in an uncoupled manner.The isotropic and cyclic hardening parameters are determined by an inverse method,and the stability of the optimization outcomes is validated by applying different starting points for the parameters.Particularly,the back-stress effect on the identification of anisotropic parameters associated with the stress invariant-based Hill48 yield function is considered for the first time.This consideration leads to an improved prediction accuracy compared to the identification of anisotropic parameters without considering back-stress effect.The combined anisotropic and cyclic constitutive model,along with the calibrated parameters,are proven capable of accurately reproducing the intricate deformation behavior of laser powder bed fusion fabricated AlSi10Mg.

Influence of quasi-electrostatic support on amplification of space charge waves in amplification section of a superheterodyne free electron laser

A theoretical study of the influence of a quasi-electrostatic support on the amplification level of the slow space charge wave(SCW) in the amplification section of a superheterodyne free electron laser(FEL) was carried out. One of the ways to significantly increase the saturation level of the slow SCW is maintaining the conditions of a three-wave parametric resonance between the slow, fast SCWs and the resulting pump electric field. This can be done by introducing the quasielectrostatic support in the superheterodyne FEL amplification section. Also, it was found that the generated pump electric field significantly influences the maintenance of parametric resonance conditions. As a result, this increases the saturation level of the slow SCW by 70%. Finally, the quasi-electrostatic support significantly reduces the maximum value of the electrostatic undulator pump field strength, which is necessary to achieve the maximum saturation level of the slow SCW.

Ultracompact phase plate fabricated by femtosecond laser two-photon polymerization for generation of Mathieu–Gauss beams

The Mathieu beam is a typical nondiffracting beam characterized by its propagation invariance and self-reconstruction.These extraordinary properties have given rise to potentialities for applications such as optical communications,optical trapping,and material processing.However,the experimental generation of Mathieu–Gauss beams possessing high quality and compactness is still challenging.In this work,even and helical Mathieu phase plates with different orders m and ellipticity parameters q are fabricated by femtosecond laser two-photon polymerization.The experimentally generated nondiffracting beams are propagationinvariant in several hundred millimeters,which agree with numerical simulations.This work may promote the miniaturization of the application of nondiffracting beams in micronanooptics.

Two-photon absorption and stimulated emission in poly-crystalline Zinc Selenide with femtosecond laser excitation

The optical nonlinearity in polycrystalline zinc selenide(ZnSe),excited with 775 nm,1 kHz femtosecond laser pulses was investigated via the nonlinear transmission with material thickness and the Z scan technique.The measured two photon absorption coefficientβwas intensity dependent,inferring that reverse saturated absorption(RSA)is also relevant dur-ing high intensity excitation in ZnSe.At low peak intensity I<5 GW cm^(-2),we findβ=3.5 cm GW^(-1) at 775 nm.The spec-tral properties of the broad blueish two-photon induced fluorescence(460 nm-500 nm)was studied,displaying self-ab-sorption near the band edge while the upper state lifetime was measured to be τ_(e)~3.3 ns.Stimulated emission was ob-served when pumping a 0.5 mm thick polycrystalline ZnSe sample within an optical cavity,confirmed by significant line narrowing fromΔλ=11 nm(cavity blocked)toΔλ=2.8 nm at peak wavelength λ_(p)=475 nm while the upper state life-time also decreased.These results suggest that with more optimum pumping conditions and crystal cooling,polycrystal-line ZnSe might reach lasing threshold via two-photon pumping atλ=775 nm.

Two-Photon Transitions of ^(85)Rb 5D_(5/2) State by Using an Optical Frequency Comb and a Continuous-Wave Laser

A high-resolution two-photon spectrum of 5S1/2 → 5P3/2 → 5D5/2 transitions in a thermal SSRb vapor cell is presented by using an optical frequency comb and a cw laser. The fluorescence of 6P3/2 → 5S1/2 spontaneous emission is detected when the cw laser frequency is scanned from the 5S1/2 ground state to 5P3/2 hyperfine levels and the optical frequency comb repetition rate is fixed. The hyperfine splittings （Ff = 2-5） of the 5D5/2 excited state are well resolved. The dependences of fluorescence intensities on the cw laser intensity and temperature of SSRb vapor eel1 are studied, respectively. The experimental results are in good agreement with the theoretical analyses.

Coherent Features of Resonance-Mediated Two-Photon Absorption Enhancement by Varying the Energy Level Structure,Laser Spectrum Bandwidth and Central Frequency

The femtosecond pulse shaping technique has been shown to be an effective method to control the multi-photon absorption by the light–matter interaction. Previous studies mainly focused on the quantum coherent control of the multi-photon absorption by the phase, amplitude and polarization modulation, but the coherent features of the multi-photon absorption depending on the energy level structure, the laser spectrum bandwidth and laser central frequency still lack in-depth systematic research. In this work, we further explore the coherent features of the resonance-mediated two-photon absorption in a rubidium atom by varying the energy level structure, spectrum bandwidth and central frequency of the femtosecond laser field. The theoretical results show that the change of the intermediate state detuning can effectively influence the enhancement of the near-resonant part, which further affects the transform-limited （TL）-normalized final state population maximum. Moreover, as the laser spectrum bandwidth increases, the TL-normalized final state population maximum can be effectively enhanced due to the increase of the enhancement in the near-resonant part, but the TL-normalized final state population maximum is constant by varying the laser central frequency. These studies can provide a clear physical picture for understanding the coherent features of the resonance-mediated two-photon absorption, and can also provide a theoretical guidance for the future applications.

Alloy design for laser powder bed fusion additive manufacturing:a critical review

Metal additive manufacturing(AM)has been extensively studied in recent decades.Despite the significant progress achieved in manufacturing complex shapes and structures,challenges such as severe cracking when using existing alloys for laser powder bed fusion(L-PBF)AM have persisted.These challenges arise because commercial alloys are primarily designed for conventional casting or forging processes,overlooking the fast cooling rates,steep temperature gradients and multiple thermal cycles of L-PBF.To address this,there is an urgent need to develop novel alloys specifically tailored for L-PBF technologies.This review provides a comprehensive summary of the strategies employed in alloy design for L-PBF.It aims to guide future research on designing novel alloys dedicated to L-PBF instead of adapting existing alloys.The review begins by discussing the features of the L-PBF processes,focusing on rapid solidification and intrinsic heat treatment.Next,the printability of the four main existing alloys(Fe-,Ni-,Al-and Ti-based alloys)is critically assessed,with a comparison of their conventional weldability.It was found that the weldability criteria are not always applicable in estimating printability.Furthermore,the review presents recent advances in alloy development and associated strategies,categorizing them into crack mitigation-oriented,microstructure manipulation-oriented and machine learning-assisted approaches.Lastly,an outlook and suggestions are given to highlight the issues that need to be addressed in future work.