Study on vibration reduction of two-scale system coupled with dynamic vibration absorber

The dynamic vibration absorber with inerter and grounded stiffness(IGDVA)is used to control a two-scale system subject to a weak periodic perturbation.The vibration suppression effect is remarkable.The amplitude of the main system coupled with absorber is significantly reduced,and the high frequency vibration completely disappears.First,through the slow-fast analysis and stability theory,it is found that the stability of the autonomous system exerts a notable regulating effect on the vibration response of the non-autonomous system.After adding the dynamic vibrator absorber,the center in the autonomous system changes to an asymptotically stable focus,consequently suppressing the vibration in the non-autonomous system.Further research reveals that the parameters of the absorber affect the real parts of the eigenvalues of the autonomous system,thereby regulating the stability of the system.Transitioning from a qualitative standpoint to a quantitative approach,a comparison of the solutions before and after the introduction of the dynamic absorber reveals that,when the grounded stiffness ratio and the mass ratio of the dynamic absorber are not equal,the high-frequency part in the analytical solution disappears.As a result,this leads to a reduction in the amplitude of the trajectory,achieving a vibration reduction effect.

Acid-rock reaction kinetics in a two-scale model based on reaction order correction

The reaction order plays a crucial role in evaluating the response rate of acid-rock.However,the conventional two-scale model typically assumes that the reaction order is constant as one,which can lead to significant deviations from reality.To address this issue,this study proposes a novel multi-order dynamic model for acid-rock reaction by combining rotating disk experimental data with theoretical derivation.Through numerical simulations,this model allows for the investigation of the impact of acidification conditions on different orders of reaction,thereby providing valuable insights for on-site construction.The analysis reveals that higher response orders require higher optimal acid liquid flow rates,and lower optimal H+diffusion coefficients,and demonstrate no significant correlation with acid concentration.Consequently,it is recommended to increase the displacement and use high-viscosity acid for reservoirs with high calcite content,while reducing the displacement and using low-viscosity acid for reservoirs with high dolomite content.

Concurrent Two-Scale Topology Optimization of Thermoelastic Structures Using a M-VCUT Level Set Based Model of Microstructures

By analyzing the results of compliance minimization of thermoelastic structures,we observed that microstructures play an important role in this optimization problem.Then,we propose to use a multiple variable cutting(M-VCUT)level set-based model of microstructures to solve the concurrent two-scale topology optimization of thermoelastic structures.A microstructure is obtained by combining multiple virtual microstructures that are derived respectively from multiple microstructure prototypes,thus giving more diversity of microstructure and more flexibility in design optimization.The effective mechanical properties of microstructures are computed in an off-line phase by using the homogenization method,and then a mapping relationship between the design variables and the effective properties is established,which gives a data-driven model of microstructure.In the online phase,the data-driven model is used in the finite element analysis to improve the computational efficiency.The compliance minimization problem is considered,and the results of numerical examples prove that the proposed method is effective.

Improved Microwave Ocean Emissivity and Reflectivity Models Derived from Two-Scale Roughness Theory

The Geometrical Optics(GO)approach and the FAST Emissivity Model(FASTEM)are widely used to estimate the surface radiative components in atmospheric radiative transfer simulations,but their applications are limited in specific conditions.In this study,a two-scale reflectivity model(TSRM)and a two-scale emissivity model(TSEM)are developed from the two-scale roughness theory.Unlike GO which only computes six non-zero elements in the reflectivity matrix,The TSRM includes 16 elements of Stokes reflectivity matrix which are important for improving radiative transfer simulation accuracy in a scattering atmosphere.It covers the frequency range from L-to W-bands.The dependences of all TSRM elements on zenith angle,wind speed,and frequency are derived and analyzed in details.For a set of downwelling radiances in microwave frequencies,the reflected upwelling brightness temperature(BTs)are calculated from both TSRM and GO and compared for analyzing their discrepancies.The TSRM not only includes the effects of GO but also accounts for the small-scale Bragg scattering effect in an order of several degrees in Kelvins in brightness temperature.Also,the third and fourth components of the Stokes vector can only be produced from the TSRM.For the emitted radiation,BT differences in vertical polarization between a TSEM and FASTEM are generally less than 5 K when the satellite zenith angle is less than 40°,whereas those for the horizontal component can be quite significant,greater than 20 K.

A two-scale method for identifying mechanical parameters of composite materials with periodic configuration

In this paper, a two-scale method （TSM） is presented for identifying the mechanics parameters such as stiffness and strength of composite materials with small periodic configuration. Firstly, a formulation is briefly given for two-scale analysis （TSA） of the composite materials. And then a two-scale computation formulation of strains and stresses is developed by displacement solution with orthotropic material coefficients for three kinds of such composites structures, i.e., the tension column with a square cross section, the bending cantilever with a rectangular cross section and the torsion column with a circle cross section. The strength formulas for the three kinds of structures are derived and the TSM procedure is discussed. Finally the numerical results of stiffness and strength are presented and compared with experimental data. It shows that the TSM method in this paper is feasible and valid for predicting both the stiffness and the strength of the composite materials with periodic configuration.

A nonlinear k_p-ε_p particle two-scale turbulence model and its application

A particle nonlinear two-scale kp-εp turbulence model is proposed for simulating the anisotropic turbulent two-phase flow. The particle kinetic energy equation for two-scale fluctuation, particle energy transfer rate equation for large-scale fluctuation, and particle turbulent kinetic energy dissipation rate equation for small-scale fluctuation are derived and closed. This model is used to simulate gas-particle flows in a sudden-expansion chamber. The simulation is com- pared with the experiment and with those obtained by using another two kinds of tow-phase turbulence model, such as the single-scale k-ε two-phase turbulence model and the particle two-scale second-order moment （USM） two-phase turbulence model. It is shown that the present model gives simulation in much better agreement with the experiment than the single-scale k-ε two-phase turbulence model does and is almost as good as the particle two-scale USM turbu-lence model.

Two-scale finite element method for piezoelectric problem in periodic structure

The prediction of the mechanical and electric properties of piezoelectric fibre composites has become an active research area in recent years. By means of introducing a boundary layer problem, some new kinds of two-scale finite element methods for solutions to the electric potential and the displacement for composite material in periodic struc- ture under the coupled piezoelectricity are derived. The coupled two-scale relation of the electric potential and the displacement is set up, and some finite element approximate estimates and numerical examples which show the effectiveness of the method are presented.

A two-scale second-order moment two-phase turbulence model for simulating dense gas-particle flows

A two-scale second-order moment two-phase turbulence model accounting for inter-particle collision is developed, based on the concepts of particle large-scale fluctuation due to turbulence and particle small-scale fluctuation due to collision and through a unified treatment of these two kinds of fluctuations. The proposed model is used to simulate gas-particle flows in a channel and in a downer. Simulation results are in agreement with the experimental results reported in references and are near the results obtained using the sin- gle-scale second-order moment two-phase turbulence model superposed with a particle collision model （USM-θ model） in most regions.

Polarimetric entropy of the ocean surface with a two-scale scattering model

The relationships among an ocean wave spectrum,a fully polarimetric coherence matrix,and radar parameters are deduced with an electromagnetic wave theory.Furthermore,the relationship between the polarimetric entropy and ocean wave spectrum is established based on the definition of entropy and a twoscale scattering model of the ocean surface.It is the first time that the polarimetric entropy of the ocean surface is presented in theory.Meanwhile,the relationships among the fully polarimetric entropy and the parameters related to radar and ocean are discussed.The study is the basis of further monitoring targets on the ocean surface and deriving oceanic information with the entropy from the ocean surface.The contrast enhancement between human-made targets and the ocean surface with the entropy is presented with quad-pol airborne synthetic aperture radar（AIRSAR） data.

Derivation of a second-order model for Reynolds stress using renormalization group analysis and the two-scale expansion technique

With the two-scale expansion technique proposed by Yoshizawa,the turbulent fluctuating field is expanded around the isotropic field.At a low-order two-scale expansion,applying the mode coupling approximation in the Yakhot-Orszag renormalization group method to analyze the fluctuating field,the Reynolds-average terms in the Reynolds stress transport equation,such as the convective term,the pressure-gradient-velocity correlation term and the dissipation term,are modeled.Two numerical examples：turbulent flow past a backward-facing step and the fully developed flow in a rotating channel,are presented for testing the efficiency of the proposed second-order model.For these two numerical examples,the proposed model performs as well as the Gibson-Launder （GL） model,giving better prediction than the standard k-ε model,especially in the abilities to calculate the secondary flow in the backward-facing step flow and to capture the asymmetric turbulent structure caused by frame rotation.

Second-order two-scale computational method for ageing linear viscoelastic problem in composite materials with periodic structure

The correspondence principle is an important mathematical technique to compute the non-ageing linear viscoelastic problem as it allows to take advantage of the computational methods originally developed for the elastic case. However, the correspon- dence principle becomes invalid when the materials exhibit ageing. To deal with this problem, a second-order two-scale （SOTS） computational method in the time domain is presented to predict the ageing linear viscoelastic performance of composite materials with a periodic structure. First, in the time domain, the SOTS formulation for calcu- lating the effective relaxation modulus and displacement approximate solutions of the ageing viscoelastic problem is formally derived. Error estimates of the displacement ap- proximate solutions for SOTS method are then given. Numerical results obtained by the SOTS method are shown and compared with those by the finite element method in a very fine mesh. Both the analytical and numerical results show that the SOTS computational method is feasible and efficient to predict the ageing linear viscoelastic performance of composite materials with a periodic structure.

EFFECT OF EMPIRICAL COEFFICIENTS ON SIMULATION IN TWO-SCALE SECOND-ORDER MOMENT PARTICLE-PHASE TURBULENCE MODEL

A two-scale second-order moment two-phase turbulence model accounting for inter-particle collision is developed, based on the concept of particle large-scale fluctuation due to turbulence and particle small-scale fluctuation due to collision. The proposed model is used to simulate gas-particle downer reactor flows. The computational results of both particle volume fraction and mean velocity are in agreement with the experimental results. After analyzing effects of empirical coefficient on prediction results, we can come to a conclusion that, inside the limit range of empirical coefficient, the predictions do not reveal a large sensitivity to the empirical coefficient in the downer reactor, but a relatively great change of the constants has important effect on the prediction.

Second-order two-scale analysis and numerical algorithms for the hyperbolic–parabolic equations with rapidly oscillating coefficients

We study the hyperbolic–parabolic equations with rapidly oscillating coefficients. The formal second-order two-scale asymptotic expansion solutions are constructed by the multiscale asymptotic analysis. In addition, we theoretically explain the importance of the second-order two-scale solution by the error analysis in the pointwise sense. The associated explicit convergence rates are also obtained. Then a second-order two-scale numerical method based on the Newmark scheme is presented to solve the equations. Finally, some numerical examples are used to verify the effectiveness and efficiency of the multiscale numerical algorithm we proposed.

Second-order two-scale computations for conductive radiative heat transfer problem in periodic porous materials

In this paper, a kind of second-order two-scale （SOTS） computation is developed for conductive-radiative heat trans- fer problem in periodic porous materials. First of all, by the asymptotic expansion of the temperature field, the cell problem, homogenization problem, and second-order correctors are obtained successively. Then, the corresponding finite element al- gorithms are proposed. Finally, some numerical results are presented and compared with theoretical results. The numerical results of the proposed algorithm conform with those of the FE algorithm well, demonstrating the accuracy of the present method and its potential applications in thermal engineering of porous materials.

A two-order and two-scale computation method for nonselfadjoint elliptic problems with rapidly oscillatory coefficients

The purpose of this paper is to solve nonselfadjoint elliptic problems with rapidly oscillatory coefficients. A two-order and two-scale approximate solution expression for nonselfadjoint elliptic problems is considered, and the error estimation of the twoorder and two-scale approximate solution is derived. The numerical result shows that the presented approximation solution is effective.

Dynamic thermo-mechanical coupled response of random particulate composites:A statistical two-scale method

This paper focuses on the dynamic thermo-mechanical coupled response of random particulate composite materials. Both the inertia term and coupling term are considered in the dynamic coupled problem. The formulation of the problem by a statistical second-order two-scale （SSOTS） analysis method and the algorithm procedure based on the finite-element difference method are presented. Numerical results of coupled cases are compared with those of uncoupled cases. It shows that the coupling effects on temperature, thermal flux, displacement, and stresses are very distinct, and the micro- characteristics of particles affect the coupling effect of the random composites. Furthermore, the coupling effect causes a lag in the variations of temperature, thermal flux, displacement, and stresses.

Stochastic Second-Order Two-Scale Method for Predicting the Mechanical Properties of Composite Materials with Random Interpenetrating Phase

In this paper,a stochastic second-order two-scale(SSOTS)method is proposed for predicting the non-deterministic mechanical properties of composites with random interpenetrating phase.Firstly,based on random morphology description functions(RMDF),the randomness of the material properties of the constituents as well as the correlation among these random properties are fully characterized through the topologies of the constituents.Then,by virtue of multiscale asymptotic analysis,the random effective quantities such as stiffness parameters and strength parameters along with their numerical computation formulae are derived by a SSOTS strategy combined with the Monte-Carlo method.Finally,the SSOTS method developed in this paper shows an excellent computational accuracy,and therefore present an important advance towards computationally efficient multiscale modeling frameworks considering microstructure uncertainties.

Statistical second-order two-scale analysis and computation for heat conduction problem with radiation boundary condition in porous materials

This paper discusses a statistical second-order two-scale（SSOTS） analysis and computation for a heat conduction problem with a radiation boundary condition in random porous materials.Firstly,the microscopic configuration for the structure with random distribution is briefly characterized.Secondly,the SSOTS formulae for computing the heat transfer problem are derived successively by means of the construction way for each cell.Then,the statistical prediction algorithm based on the proposed two-scale model is described in detail.Finally,some numerical experiments are proposed,which show that the SSOTS method developed in this paper is effective for predicting the heat transfer performance of porous materials and demonstrating its significant applications in actual engineering computation.

The Electrokinetic Cross-Coupling Coefficient: Two-Scale Homogenization Approach

By the two-scale homogenization approach we justify a two-scale model of ion transport through a layered membrane, with flows being driven by a pressure gradient and an external electrical field. By up-scaling, the electroosmotic flow equations in horizontal thin slits separated by thin solid layers are approximated by a homogenized system of macroscale equations in the form of the Poisson equation for induced vertical electrical field and Onsager's reciprocity relations between global fluxes (hydrodynamic and electric) and forces (horizontal pressure gradient and external electrical field). In addition, the two-scale approach provides macroscopic mobility coefficients in the Onsager relations. On this way, the cross-coupling kinetic coefficient is obtained in a form which does involves the &#950 -potential among the data provided the surface current is negligible.

一种发射系下旋转弹的捷联惯导算法

为了提高旋转弹的姿态测量精度,提出了一种发射系下的旋转弹捷联导航算法。首先,推导了发射系导航更新方程;然后,利用传感器测量的前周期角速率对姿态更新算法进行优化,推导了基于角速率的旋转矢量更新算法及其算法误差;最后,采用陀螺仪标度因数的提升方法,实现了捷联惯导姿态测量精度有效的提高。通过对双子样、优化双子样算法在自旋运动条件下的数学仿真、基于转台的半实物仿真试验进行了验证。试验结果表明:在自旋机动条件下,相较于传统双子样算法,基于发射系的旋转弹捷联导航算法具有更高的精度,验证了算法在工程应用实现的正确性和有效性。