Efficient and Stable Inverted Perovskite Solar Modules Enabled by Solid-Liquid Two-Step Film Formation

A considerable efficiency gap exists between large-area perovskite solar modules and small-area perovskite solar cells.The control of forming uniform and large-area film and perovskite crystallization is still the main obstacle restricting the efficiency of PSMs.In this work,we adopted a solid-liquid two-step film formation technique,which involved the evaporation of a lead iodide film and blade coating of an organic ammonium halide solution to prepare perovskite films.This method possesses the advantages of integrating vapor deposition and solution methods,which could apply to substrates with different roughness and avoid using toxic solvents to achieve a more uniform,large-area perovskite film.Furthermore,modification of the NiO_(x)/perovskite buried interface and introduction of Urea additives were utilized to reduce interface recombination and regulate perovskite crystallization.As a result,a large-area perovskite film possessing larger grains,fewer pinholes,and reduced defects could be achieved.The inverted PSM with an active area of 61.56 cm^(2)(10×10 cm^(2)substrate)achieved a champion power conversion efficiency of 20.56%and significantly improved stability.This method suggests an innovative approach to resolving the uniformity issue associated with large-area film fabrication.

A new two-step variational model for multiplicative noise removal with applications to texture images

Multiplicative noise removal problems have attracted much attention in recent years.Unlike additive noise,multiplicative noise destroys almost all information of the original image,especially for texture images.Motivated by the TV-Stokes model,we propose a new two-step variational model to denoise the texture images corrupted by multiplicative noise with a good geometry explanation in this paper.In the first step,we convert the multiplicative denoising problem into an additive one by the logarithm transform and propagate the isophote directions in the tangential field smoothing.Once the isophote directions are constructed,an image is restored to fit the constructed directions in the second step.The existence and uniqueness of the solution to the variational problems are proved.In these two steps,we use the gradient descent method and construct finite difference schemes to solve the problems.Especially,the augmented Lagrangian method and the fast Fourier transform are adopted to accelerate the calculation.Experimental results show that the proposed model can remove the multiplicative noise efficiently and protect the texture well.

Two-step growth of β-Ga_(2)O_(3) on c-plane sapphire using MOCVD for solar-blind photodetector

In this work,a two-step metal organic chemical vapor deposition(MOCVD)method was applied for growingβ-Ga_(2)O_(3) film on c-plane sapphire.Optimized buffer layer growth temperature(T_(B))was found at 700℃ and theβ-Ga_(2)O_(3) film with full width at half maximum(FWHM)of 0.66°was achieved.A metal−semiconductor−metal(MSM)solar-blind photodetector(PD)was fabricated based on theβ-Ga_(2)O_(3) film.Ultrahigh responsivity of 1422 A/W@254 nm and photo-to-dark current ratio(PDCR)of 10^(6) at 10 V bias were obtained.The detectivity of 2.5×10^(15) Jones proved that the photodetector has outstanding performance in detecting weak signals.Moreover,the photodetector exhibited superior wavelength selectivity with rejection ratio(R_(250 nm)/R_(400 nm))of 105.These results indicate that the two-step method is a promising approach for preparation of high-qualityβ-Ga_(2)O_(3)films for high-performance solar-blind photodetectors.

Effect of two-step solid solution on microstructure andδphase precipitation of Inconel 718 alloy

Inconel 718 is the most popular nickel-based superalloy and is extensively used in aerospace,automotive,and energy indus-tries owing to its extraordinary thermomechanical properties.The effects of different two-step solid solution treatments on microstructure andδphase precipitation of Inconel 718 alloy were studied,and the transformation mechanism fromγ″metastable phase toδphase was clarified.The precipitates were statistically analyzed by X-ray diffractometry.The results show that theδphase content firstly increased,and then decreased with the temperature of the second-step solid solution.The changes in microstructure andδphase were studied by scanning electron microscopy and transmission electron microscopy.An intragranularδphase formed in Inconel 718 alloy at the second-[100]_(δ)[011]γ step solid solution temperature of 925℃,and its orientation relationship withγmatrix was determined as//and(010)_(δ)//(111)γ.Furthermore,the Vickers hardness of different heat treatment samples was measured,and the sample treated by second-step solid solution at 1010℃ reached the maximum hardness of HV 446.84.

Two-step strategy—conjunctival flap covering surgery combined with secondary deep anterior lamellar keratoplasty for the treatment of high-risk fungal keratitis

AIM:To investigate whether the two-step strategy[conjunctival flap covering surgery(CFCS)combined with secondary deep anterior lamellar keratoplasty(DALK)]is effective for patients with high-risk fungal keratitis(FK).METHODS:In this noncomparative,retrospective case series,10 subjects(6 males,4 females)with a mean age of 56.5±7.1(range 47-72)y with high-risk FK undergone the two-step strategy were included.Reported outcome measures were healing of the corneal ulcer,recurrence of FK,reject reaction,improvement in best corrected visual acuity(BCVA)and relevant complications.RESULTS:The average diameter of corneal infiltrates was 7.50±0.39 mm,ranging from 6.94 to 8.13 mm.The mean depth of corneal infiltrates was 422.4±77.1μm,ranging from 350 to 535μm.The mean corneal thickness was 597.4±117.3μm,ranging from 458 to 851μm.Hypopyon and endothelial plaques were presented in all patients.The period between the two steps was 3.65±0.9(ranging from 3 to 5)mo.The graft diameter was 7.75±0.39 mm.At the last follow-up(average 9.25±3.39,ranging from 5.5 to 17mo),no fungal recurrence or graft rejection appeared,and all patients showed improvement of BCVA.One patient suffered from liver function impairment due to oral voriconazole for 4wk and recovered spontaneously after 1wk of drug withdrawal.CONCLUSION:The two-step strategy is safe and effective in the treatment of high-risk FK by transforming intentional therapeutic penetrating keratoplasty during acute infection to later optical DALK.It is a practical strategy,especially in areas lacking fresh donor corneas and eye bank services.

Intensified shape selectivity and alkylation reaction for the two-step conversion of methanol aromatization to p-xylene

Two-step conversion of methanol to aromatics via light hydrocarbons can significantly improve the conversion stability compared with direct aromatization of methanol,but it remains a challenge to achieve a high p-xylene(PX)selectivity.Herein,silica coating was firstly used to passivate external acid sites of ZSM-5 catalyst for the aromatization of light hydrocarbons by the chemical liquid deposition method.With the increase of SiO_(2) deposition,the density of the external acid sites of the catalyst was decreased from 0.1 to 0.03 mmol·g^(-1),which inhibited the surface secondary reactions and increased the PX/X from 34.6% to 60.0%.In view of the fact that the aromatization process in the second step was partly inhibited as methanol was consumed in advance in the upper methanol-to-light hydrocarbons catalyst layer,part of methanol was directly introduced into the lower aromatization catalyst layer to promote the alkylation process during the aromatization,which decreased the toluene selectivity from 34.5% to 14.3% but increased the xylene selectivity from 40.0%to 55.3%.It was also found that an appropriate external acid density was needed for aromatization catalyst to strengthen the alkylation process and improve the selectivity of xylene under the conditions of methanol introduction.

A two-step correction of a congenital alar cleft in an adult patient:A case report

This report describes a two-step surgical correction of an isolated left-sided congenital alar cleft in a 21-year-old male patient presenting with a 9×6.5 mm^(2)-sized cleft.Malformations of the alar structure and displacement of the lower lateral cartilage were observed.All flaps survived,and the patient was completely satisfied with the surgical results.This surgical treatment is simple and reliable,can greatly improve the nasal appearance of patients with alar clefts,and may be an alternative to the current surgical treatment.

Novel two-step process to improve efficiency of bio-oxidation of Axi high-sulfur refractory gold concentrates

In order to improve the bio-oxidation efficiency of Axi refractory gold concentrate, a two-step process including a high temperature chemical oxidation and a subsequent bio-oxidation, combined with p H control during the bio-oxidation step was used. The results revealed that the optimum mode was to maintain solution p H at 1.0-1.2 during the biological oxidation stage. Under this condition, the activity of mixed culture could be sustained and the formation of jarosite could be diminished, thus the oxidation efficiency was improved. The oxidation levels of iron and sulfur were improved by 12.50% and 15.49%, and the gold recovery was increased by 21.02%. Therefore, the two-step process combined with p H control is an effective method for oxidizing the biohydrometallurgical process of Axi gold concentrate, and it will have a broad prospect of application in dealing with complex refractory gold concentrate.

AP-CVD法制备的二氧化钛薄膜结构及亲水性研究

基于实现在线镀膜的目的,研究了以TiCl4为钛源,用AP-CVD法在玻璃基板上制备TiO2薄膜的工艺.利用扫描电子显微(SEM)技术和X射线衍射(XRD)技术,研究了不同基板反应温度下薄膜的表面形貌和晶体结构,分析了表面形貌和结构对亲水性的影响.结果表明通过改变反应温度可以控制锐钛矿和金红石的相对量,薄膜的亲水性和表面形貌、粗糙度有密切的关系.

Optimization of Sporulation Conditions of Biocontrol Bacteria B579 by Two-step Control Strategy

[Objective] For preparing the biopesticide of Bacillus subtilis B579 with high spore concentration,the sporulation conditions were optimized.[Method] Two-step fermentation control strategy was used,in which,the first phase（0-10 h）was to improve cell growth,and the second phase（10-30 h）was to promote spore formation.Four factors including initial glucose concentration,fermentation pH,temperature（in the second phase）and shaking speed（in the second phase）were optimized using the methods of single factor test and orthogonal experiment.[Result] The initial glucose concentration showed a significant effect on sporulation.The optimal conditions for the spore formation of B.subtilis B579 were as follows：initial glucose concentration 5 g/L,fermentation pH 7.0,the temperature for the first phase 37 ℃,and the shaking speed for the first phase 180 r/min,the temperature for the second phase 40 ℃,and the shaking speed for the second phase 200 r/min;in addition,the first phase was 10 h and the second phase of fermentation was conducted for 30 h.Under such conditions,the spore concentration and spore formation rate could reach 9.43×108 CFU/ml and 90.99%,respectively,which represented 6.70-fold and 2.43-fold increase compared with those before optimization.[Conclusion] The spores concentration of biocontrol agent was improved using two-step control strategy,which provided the basis for biopesticide production in large scale.

Accelerated Sequential Deposition Reaction via Crystal Orientation Engineering for Low-Temperature,High-Efficiency Carbon-Electrode CsPbBr_(3) Solar Cells

Low-temperature,ambient processing of high-quality CsPbBr_(3)films is demanded for scalable production of efficient,low-cost carbon-electrode perovskite solar cells(PSCs).Herein,we demonstrate a crystal orientation engineering strategy of PbBr_(2)precursor film to accelerate its reaction with CsBr precursor during two-step sequential deposition of CsPbBr_(3)films.Such a novel strategy is proceeded by adding CsBr species into PbBr_(2)precursor,which can tailor the preferred crystal orientation of PbBr_(2)film from[020]into[031],with CsBr additive staying in the film as CsPb_(2)Br_(5)phase.Theoretical calculations show that the reaction energy barrier of(031)planes of PbBr_(2)with CsBr is lower about 2.28 eV than that of(O2O)planes.Therefore,CsPbBr_(3)films with full coverage,high purity,high crystallinity,micro-sized grains can be obtained at a low temperature of 150℃.Carbon-electrode PSCs with these desired CsPbBr_(3)films yield the record-high efficiency of 10.27%coupled with excellent operation stability.Meanwhile,the 1 cm^(2)area one with the superior efficiency of 8.00%as well as the flexible one with the champion efficiency of 8.27%and excellent mechanical bending characteristics are also achieved.

Arrhenius relationship and two-step scheme in AF hyperdynamics simulation of diffusion of Mg/Zn interface

The accelerating factor （AF） method is a simple and appropriate way to investigate the atomic long-time deep diffusion at solid-solid interface. In the framework of AF hyperdynamics （HD） simulation, the relationship between the diffusion coefficient along the direction of z-axis which is normal to the Mg/Zn interface and temperature was investigated, and the AF＇s impact on the diffusion constant （D0） and activation energy （Q^＊） was studied. Then, two steps were taken to simulate the atomic diffusion process and the formation of new phases： one for acceleration and the other for equilibration. The results show that： the Arrhenius equation works well for the description of Dz with different accelerating factors; the AF has no effect on the diffusion constant Do in the case of no phase transition; and the relationship between Q＊ and Q conforms to Q^＊=Q/A. Then, the new Arrhenius equation for AFHD is successfully constructed as Dz=Doexp[-Q/（ART）]. Meanwhile, the authentic equilibrium conformations at any dynamic moment can only be reproduced by the equilibration simulation of the HD-simulated configurations. Key words： accelerating factor method; Arrhenius equation; two-steps scheme; Mg/Zn interface; hyperdynamic simulation

居民消费结构转型升级的碳减排效应研究

降低各地区的碳排放强度对于“双碳”目标的实现具有重要意义。近年来,我国居民消费结构发生了重大变化,居民消费结构转型升级对碳排放强度有显著影响。本文采用2000-2020年我国30个省级地区的空间面板样本数据,利用动态面板模型研究了居民消费结构转型对碳排放强度是否存在非线性影响机制;对产业结构能否充当中介变量进行分析,对东中西部地区的异质性进行了研究;研究表明居民消费结构对碳排放强度能够产生明显的抑制效果,东部地区的影响更为显著,并且产业结构能够作为中介效应影响碳排放强度。本研究结论与政策启示对于居民消费结构转型升级实现“双碳”目标具有一定的现实意义。

Socioeconomic traits and the risk of Barrett’s esophagus and gastroesophageal reflux disease: A Mendelian randomization study

BACKGROUND Previous observational studies have shown that the prevalence of gastroesophageal reflux disease(GERD)and Barrett’s esophagus(BE)is associated with socioeconomic status.However,due to the methodological limitations of traditional observational studies,it is challenging to definitively establish causality.AIM To explore the causal relationship between the prevalence of these conditions and socioeconomic status using Mendelian randomization(MR).METHODS We initially screened single nucleotide polymorphisms(SNPs)to serve as proxies for eight socioeconomic status phenotypes for univariate MR analysis.The inverse variance weighted(IVW)method was used as the primary analytical method to estimate the causal relationship between the eight socioeconomic status phenotypes and the risk of GERD and BE.We then collected combinations of SNPs as composite proxies for the eight socioeconomic phenotypes to perform multivariate MR(MVMR)analyses based on the IVW MVMR model.Furthermore,a two-step MR mediation analysis was used to examine the potential mediation of the associations by body mass index,major depressive disorder(MDD),smoking,alcohol consumption,and sleep duration.RESULTS The study identified three socioeconomic statuses that had a significant impact on GERD.These included household income[odds ratio(OR):0.46;95% confidence interval(95%CI):0.31-0.70],education attainment(OR:0.23;95%CI:0.18-0.29),and the Townsend Deprivation Index at recruitment(OR:1.57;95%CI:1.04-2.37).These factors were found to independently and predominantly influence the genetic causal effect of GERD.Furthermore,the mediating effect of educational attainment on GERD was found to be mediated by MDD(proportion mediated:10.83%).Similarly,the effect of educational attainment on BE was mediated by MDD(proportion mediated:10.58%)and the number of cigarettes smoked per day(proportion mediated:3.50%).Additionally,the mediating effect of household income on GERD was observed to be mediated by sleep duration(proportion mediated:9.75%)CONCLUSION This MR study shed light on the link between socioeconomic status and GERD or BE,providing insights for the prevention of esophageal cancer and precancerous lesions.

A two-step quantum secure direct communication protocol with hyperentanglement

We propose a two-step quantum secure direct communication （QSDC） protocol with hyperentanglement in both the spatial-mode and the polarization degrees of freedom of photon pairs which can in principle be produced with a beta barium borate crystal. The secret message can be encoded on the photon pairs with unitary operations in these two degrees of freedom independently. This QSDC protocol has a higher capacity than the original two-step QSDC protocol as each photon pair can carry 4 bits of information. Compared with the QSDC protocol based on hyperdense coding, this QSDC protocol has the immunity to Trojan horse attack strategies with the process for determining the number of the photons in each quantum signal as it is a one-way quantum communication protocol.

Effects of the two-step ageing treatment on the microstructure and properties of 7B04 alloy pre-stretched thick plates

The effects of the two-step ageing parameters （temperature and time） on the mechanical properties and electrical conductivity of 7B04 （A1-Zn-Mg-Cu） pre-stretched thick plates were studied. The results reveal that the initial T1 ageing contributes a major increase of the tensile strength, and the 0.2% proof stress value reaches 482 MPa after ageing for 7 h at 115℃. Behavioral differences in the tensile properties of the alloy after the two-step ageing treatment were less with the first-step ageing at 115~C for different time periods （7, 14, and 21 h）. The effects of the second ageing parameters on the properties and microstructure of the 7B04 alloy were remarkable. TEM analysis of the samples aged at Temper I （7 h at 115℃ ＋ 12 h at 160℃） and Temper II （7 h at 115℃ ＋ 16 h at 165℃） indicates that two kinds of phases, i.e. 11＇ and 11 phases, precipitate from the matrix and efficiently improve the tensile strength of the alloy, and the grain boundary precipitates are coarse and discrete. There are obvious precipitate free zones （PFZs） along the grain boundary in the microstructure of the alloy after the two-step ageing treatment.

Cryopreservation of Gametophytes of Laminaria japonica (Phaeophyta) Using Encapsulation-Dehydration with Two-Step Cooling Method

Gametophytes of Laminaria japonica were cryopreserved in liquid nitrogen using encapsulation-dehydration with two-step cooling method. Gametophytes cultured at 10℃ and under continuous irradiance of 30 μmol m^-2 s^-1 for 3 weeks were encapsulated in calcium alginate beads. The beads were dehydrated in 0.4 molLl sucrose prepared with seawater for 6 h, desiccated in an incubator set at 10℃ and 70% relative humidity for 4 h, pre-frozen at either -40℃ or -60℃ for 30 min, and stored in liquid nitrogen for 〉24 h. As high as 43% of survival rate was observed when gametophytes were thawed by placing the beads in 40℃ seawater and re-hydrated in 0.05 molL^-1 citrate sodium prepared using 30‰ NaCl 7 d later. More cells of male gametophytes survived the whole procedure in comparison with female gametophytes. The cells of gametophytes surviving the preservation were able to grow asexually and produce morphologically normal sporophytes.

Design System of the Two-step Gear Reducer on Case-based Reasoning

The design of the two-step gear reducer is a tedious and time-consuming process. For the purpose of improving the efficiency and intelligence of design process, case-based reasoning（CBR） technology was applied to the design of the two-step gear reducer. Firstly, the current design method for the two-step gear reducer was analyzed and the principle of CBR was described. Secondly, according to the characteristics of the reducer, three key technologies of CBR were studied and the corresponding methods were provided, which are as follows： （a） an object-oriented knowledge representation method, （b） a retrieval method combining the nearest neighbor with the induction indexing, and （c） a case adaptation algorithm combining the revision based on rule with artificial revision. Also, for the purpose of improving the credibility of case retrieval, a new method for determining the weights of characteristics and a similarity formula were presented, which is a combinatorial weighting method with the analytic hierarchy process（AHP） and roughness set theory. Lastly, according to the above analytic results, a design system of the two-step gear reducer on CBR was developed by VC＋＋, UG and Access 2003. A new method for the design of the two-step gear reducer is provided in this study. If the foregoing developed system is applied to design the two-step gear reducer, design efficiency is improved, which enables the designer to release from the tedious design process of the gear reducer so as to put more efforts on innovative design. The study result fully reflects the feasibility and validity of CBR technology in the process of the design of the mechanical parts.

Temperature-dependent photoluminescence on organic inorganic metal halide perovskite CH_3NH_3Pb I_(3-)Cl_ prepared on ZnO/FTO substrates using a two-step method

Temperature-dependent photoluminescence characteristics of organic-inorganic halide perovskite CH3NH3Pb I3-xClx films prepared using a two-step method on ZnO/FTO substrates were investigated. Surface morphology and absorption characteristics of the films were also studied. Scanning electron microscopy revealed large crystals and substrate coverage. The orthorhombic-to-tetragonal phase transition temperature was-140 K. The films＇ exciton binding energy was 77.6 ± 10.9 meV and the energy of optical phonons was 38.8 ± 2.5 meV. These results suggest that perovskite CH3NH3Pb I（3-x）Clx films have excellent optoelectronic characteristics which further suggests their potential usage in perovskitebased optoelectronic devices.

Multi-agent controlled teleportation of multi-qubit quantum information via two-step protocol

Utilizing both the general quantum teleportation and the two-step protocol, a new method is presented by which multi-qubit quantum information can be teleported in a much easier way from a sender Alice to a receiver Bob via the control of many agents in a network than by Yang et al＇s method. In this method, only all the agents collaborate with Bob can the unknown states in Alice＇s qubits be fully reconstructed in Bob＇s qubits. Comparisons between the method and Yang et al＇s method are made. Results show that, in this method, the preparation difficulty of initial states and the identification difficulty of entangled states are considerably reduced, new method is more feasible in technique, and Hadamard operations are not needed at all.