期刊文献+
共找到263篇文章
< 1 2 14 >
每页显示 20 50 100
Efficient and Stable Inverted Perovskite Solar Modules Enabled by Solid-Liquid Two-Step Film Formation
1
作者 Juan Zhang Xiaofei Ji +13 位作者 Xiaoting Wang Liujiang Zhang Leyu Bi Zhenhuang Su Xingyu Gao Wenjun Zhang Lei Shi Guoqing Guan Abuliti Abudula Xiaogang Hao Liyou Yang Qiang Fu Alex K.‑Y.Jen Linfeng Lu 《Nano-Micro Letters》 SCIE EI CAS CSCD 2024年第9期571-582,共12页
A considerable efficiency gap exists between large-area perovskite solar modules and small-area perovskite solar cells.The control of forming uniform and large-area film and perovskite crystallization is still the mai... A considerable efficiency gap exists between large-area perovskite solar modules and small-area perovskite solar cells.The control of forming uniform and large-area film and perovskite crystallization is still the main obstacle restricting the efficiency of PSMs.In this work,we adopted a solid-liquid two-step film formation technique,which involved the evaporation of a lead iodide film and blade coating of an organic ammonium halide solution to prepare perovskite films.This method possesses the advantages of integrating vapor deposition and solution methods,which could apply to substrates with different roughness and avoid using toxic solvents to achieve a more uniform,large-area perovskite film.Furthermore,modification of the NiO_(x)/perovskite buried interface and introduction of Urea additives were utilized to reduce interface recombination and regulate perovskite crystallization.As a result,a large-area perovskite film possessing larger grains,fewer pinholes,and reduced defects could be achieved.The inverted PSM with an active area of 61.56 cm^(2)(10×10 cm^(2)substrate)achieved a champion power conversion efficiency of 20.56%and significantly improved stability.This method suggests an innovative approach to resolving the uniformity issue associated with large-area film fabrication. 展开更多
关键词 Inverted perovskite solar cells Perovskite solar modules two-step film formation CRYSTALLIZATION Defect passivation
下载PDF
A new two-step variational model for multiplicative noise removal with applications to texture images
2
作者 ZHANG Long-hui YAO Wen-juan +2 位作者 SHI Sheng-zhu GUO Zhi-chang ZHANG Da-zhi 《Applied Mathematics(A Journal of Chinese Universities)》 SCIE CSCD 2024年第3期486-501,共16页
Multiplicative noise removal problems have attracted much attention in recent years.Unlike additive noise,multiplicative noise destroys almost all information of the original image,especially for texture images.Motiva... Multiplicative noise removal problems have attracted much attention in recent years.Unlike additive noise,multiplicative noise destroys almost all information of the original image,especially for texture images.Motivated by the TV-Stokes model,we propose a new two-step variational model to denoise the texture images corrupted by multiplicative noise with a good geometry explanation in this paper.In the first step,we convert the multiplicative denoising problem into an additive one by the logarithm transform and propagate the isophote directions in the tangential field smoothing.Once the isophote directions are constructed,an image is restored to fit the constructed directions in the second step.The existence and uniqueness of the solution to the variational problems are proved.In these two steps,we use the gradient descent method and construct finite difference schemes to solve the problems.Especially,the augmented Lagrangian method and the fast Fourier transform are adopted to accelerate the calculation.Experimental results show that the proposed model can remove the multiplicative noise efficiently and protect the texture well. 展开更多
关键词 multiplicative noise removal texture images total variation two-step variational method aug-mented Lagrangian method
下载PDF
Two-step growth of β-Ga_(2)O_(3) on c-plane sapphire using MOCVD for solar-blind photodetector
3
作者 Peipei Ma Jun Zheng +3 位作者 Xiangquan Liu Zhi Liu Yuhua Zuo Buwen Cheng 《Journal of Semiconductors》 EI CAS CSCD 2024年第2期51-56,共6页
In this work,a two-step metal organic chemical vapor deposition(MOCVD)method was applied for growingβ-Ga_(2)O_(3) film on c-plane sapphire.Optimized buffer layer growth temperature(T_(B))was found at 700℃ and theβ-... In this work,a two-step metal organic chemical vapor deposition(MOCVD)method was applied for growingβ-Ga_(2)O_(3) film on c-plane sapphire.Optimized buffer layer growth temperature(T_(B))was found at 700℃ and theβ-Ga_(2)O_(3) film with full width at half maximum(FWHM)of 0.66°was achieved.A metal−semiconductor−metal(MSM)solar-blind photodetector(PD)was fabricated based on theβ-Ga_(2)O_(3) film.Ultrahigh responsivity of 1422 A/W@254 nm and photo-to-dark current ratio(PDCR)of 10^(6) at 10 V bias were obtained.The detectivity of 2.5×10^(15) Jones proved that the photodetector has outstanding performance in detecting weak signals.Moreover,the photodetector exhibited superior wavelength selectivity with rejection ratio(R_(250 nm)/R_(400 nm))of 105.These results indicate that the two-step method is a promising approach for preparation of high-qualityβ-Ga_(2)O_(3)films for high-performance solar-blind photodetectors. 展开更多
关键词 MOCVD two-step growth β-Ga_(2)O_(3) solar-blind photodetector responsivity
下载PDF
Effect of two-step solid solution on microstructure andδphase precipitation of Inconel 718 alloy
4
作者 Enyu Liu Qingshuang Ma +5 位作者 Xintong Li Aoxue Gao Jing Bai Liming Yu Qiuzhi Gao Huijun Li 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2024年第10期2199-2207,共9页
Inconel 718 is the most popular nickel-based superalloy and is extensively used in aerospace,automotive,and energy indus-tries owing to its extraordinary thermomechanical properties.The effects of different two-step s... Inconel 718 is the most popular nickel-based superalloy and is extensively used in aerospace,automotive,and energy indus-tries owing to its extraordinary thermomechanical properties.The effects of different two-step solid solution treatments on microstructure andδphase precipitation of Inconel 718 alloy were studied,and the transformation mechanism fromγ″metastable phase toδphase was clarified.The precipitates were statistically analyzed by X-ray diffractometry.The results show that theδphase content firstly increased,and then decreased with the temperature of the second-step solid solution.The changes in microstructure andδphase were studied by scanning electron microscopy and transmission electron microscopy.An intragranularδphase formed in Inconel 718 alloy at the second-[100]_(δ)[011]γ step solid solution temperature of 925℃,and its orientation relationship withγmatrix was determined as//and(010)_(δ)//(111)γ.Furthermore,the Vickers hardness of different heat treatment samples was measured,and the sample treated by second-step solid solution at 1010℃ reached the maximum hardness of HV 446.84. 展开更多
关键词 Inconel 718 alloy two-step solid solution treatment δphase γ″-δtransformation
下载PDF
Two-step strategy—conjunctival flap covering surgery combined with secondary deep anterior lamellar keratoplasty for the treatment of high-risk fungal keratitis 被引量:1
5
作者 Yu-Chen Wang Jia-Song Wang +3 位作者 Bei Wang Xi Peng Hua-Tao Xie Ming-Chang Zhang 《International Journal of Ophthalmology(English edition)》 SCIE CAS 2023年第7期1065-1070,共6页
AIM:To investigate whether the two-step strategy[conjunctival flap covering surgery(CFCS)combined with secondary deep anterior lamellar keratoplasty(DALK)]is effective for patients with high-risk fungal keratitis(FK).... AIM:To investigate whether the two-step strategy[conjunctival flap covering surgery(CFCS)combined with secondary deep anterior lamellar keratoplasty(DALK)]is effective for patients with high-risk fungal keratitis(FK).METHODS:In this noncomparative,retrospective case series,10 subjects(6 males,4 females)with a mean age of 56.5±7.1(range 47-72)y with high-risk FK undergone the two-step strategy were included.Reported outcome measures were healing of the corneal ulcer,recurrence of FK,reject reaction,improvement in best corrected visual acuity(BCVA)and relevant complications.RESULTS:The average diameter of corneal infiltrates was 7.50±0.39 mm,ranging from 6.94 to 8.13 mm.The mean depth of corneal infiltrates was 422.4±77.1μm,ranging from 350 to 535μm.The mean corneal thickness was 597.4±117.3μm,ranging from 458 to 851μm.Hypopyon and endothelial plaques were presented in all patients.The period between the two steps was 3.65±0.9(ranging from 3 to 5)mo.The graft diameter was 7.75±0.39 mm.At the last follow-up(average 9.25±3.39,ranging from 5.5 to 17mo),no fungal recurrence or graft rejection appeared,and all patients showed improvement of BCVA.One patient suffered from liver function impairment due to oral voriconazole for 4wk and recovered spontaneously after 1wk of drug withdrawal.CONCLUSION:The two-step strategy is safe and effective in the treatment of high-risk FK by transforming intentional therapeutic penetrating keratoplasty during acute infection to later optical DALK.It is a practical strategy,especially in areas lacking fresh donor corneas and eye bank services. 展开更多
关键词 HIGH-RISK fungal keratitis conjunctival flap deep anterior lamellar keratoplasty two-step strategy
下载PDF
Intensified shape selectivity and alkylation reaction for the two-step conversion of methanol aromatization to p-xylene
6
作者 Tingjun Fu Ran Wang +2 位作者 Kun Ren Liangliang Zhang Zhong Li 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2023年第7期240-250,共11页
Two-step conversion of methanol to aromatics via light hydrocarbons can significantly improve the conversion stability compared with direct aromatization of methanol,but it remains a challenge to achieve a high p-xyle... Two-step conversion of methanol to aromatics via light hydrocarbons can significantly improve the conversion stability compared with direct aromatization of methanol,but it remains a challenge to achieve a high p-xylene(PX)selectivity.Herein,silica coating was firstly used to passivate external acid sites of ZSM-5 catalyst for the aromatization of light hydrocarbons by the chemical liquid deposition method.With the increase of SiO_(2) deposition,the density of the external acid sites of the catalyst was decreased from 0.1 to 0.03 mmol·g^(-1),which inhibited the surface secondary reactions and increased the PX/X from 34.6% to 60.0%.In view of the fact that the aromatization process in the second step was partly inhibited as methanol was consumed in advance in the upper methanol-to-light hydrocarbons catalyst layer,part of methanol was directly introduced into the lower aromatization catalyst layer to promote the alkylation process during the aromatization,which decreased the toluene selectivity from 34.5% to 14.3% but increased the xylene selectivity from 40.0%to 55.3%.It was also found that an appropriate external acid density was needed for aromatization catalyst to strengthen the alkylation process and improve the selectivity of xylene under the conditions of methanol introduction. 展开更多
关键词 Methanol to aromatics two-step conversion PARA-XYLENE Zeolite Silica Catalysis
下载PDF
A two-step correction of a congenital alar cleft in an adult patient:A case report
7
作者 Yinmin Wang Shikun Cao +1 位作者 Jun Yang Xusong Luo 《Chinese Journal of Plastic and Reconstructive Surgery》 2023年第4期182-184,共3页
This report describes a two-step surgical correction of an isolated left-sided congenital alar cleft in a 21-year-old male patient presenting with a 9×6.5 mm^(2)-sized cleft.Malformations of the alar structure an... This report describes a two-step surgical correction of an isolated left-sided congenital alar cleft in a 21-year-old male patient presenting with a 9×6.5 mm^(2)-sized cleft.Malformations of the alar structure and displacement of the lower lateral cartilage were observed.All flaps survived,and the patient was completely satisfied with the surgical results.This surgical treatment is simple and reliable,can greatly improve the nasal appearance of patients with alar clefts,and may be an alternative to the current surgical treatment. 展开更多
关键词 Alar cleft Tessier cleft number 2 Rotation flaps A two-step surgical treatment
下载PDF
基于Anti-Windup控制器的永磁同步电机控制系统设计 被引量:28
8
作者 于艳君 柴凤 +1 位作者 高宏伟 程树康 《电工技术学报》 EI CSCD 北大核心 2009年第4期66-70,共5页
永磁同步电机矢量控制系统中存在非线性饱和特性。分析了经典的PID控制器用于系统时所带来的积分Windup现象,并介绍了几种典型而适用的Anti-Windup控制器结构,基于变结构Anti-Windup控制器对系统进行了改进以抑制积分Windup现象,控制器... 永磁同步电机矢量控制系统中存在非线性饱和特性。分析了经典的PID控制器用于系统时所带来的积分Windup现象,并介绍了几种典型而适用的Anti-Windup控制器结构,基于变结构Anti-Windup控制器对系统进行了改进以抑制积分Windup现象,控制器采用条件积分法和反计算法相结合的控制策略,保证了系统出现饱和时,尽快地退出饱和区。仿真和实验结果表明,该控制器能有效抑制系统的积分Windup现象,系统超调量小、速度响应快,具有较好的鲁棒性和较高的稳态性能。 展开更多
关键词 永磁同步电机 PID控制器 饱和非线性 anti-windup控制器
下载PDF
基于积分状态预测的Anti-Windup PID控制器设计 被引量:10
9
作者 牛里 杨明 +1 位作者 唐思宇 徐殿国 《电工技术学报》 EI CSCD 北大核心 2014年第9期145-152,共8页
目前有多种方式用来抑制调速系统中调节器饱和引起的Windup现象。其中跟踪反计算控制策略,由于其采用线性反馈作用原理来减小调节器饱和时的积分累加值,因此对于这种策略的研究和应用较多。但由于在设计调节器参数时,没有考虑速度指令... 目前有多种方式用来抑制调速系统中调节器饱和引起的Windup现象。其中跟踪反计算控制策略,由于其采用线性反馈作用原理来减小调节器饱和时的积分累加值,因此对于这种策略的研究和应用较多。但由于在设计调节器参数时,没有考虑速度指令和负载的变化,固定的反计算参数一般难以在大范围内保证系统响应的一致性。为了在不同速度指令和负载转矩条件下,保证系统响应的一致性,本文提出了积分状态预测Anti-Windup策略来减小系统由于饱和现象而引起的性能下降,根据速度指令和负载转矩的变化,在调节器饱和时计算出积分器在系统稳态积分终值,并将其作为调节器进入线性段的积分初始值,当系统参数精确时使得系统呈现出最优的速度响应曲线。本文在相同的电流环和速度环调节器PI参数的条件下,进行了仿真实验,比较了上述AW策略与传统方法的速度响应性能。实验结果验证了理论分析及仿真波形的正确性。 展开更多
关键词 anti-windup策略 调节器饱和 永磁同步电机 积分状态预测
下载PDF
基于滤波器的Anti-Windup设计及其在伺服系统中的应用 被引量:13
10
作者 董锡君 姚郁 王子才 《哈尔滨工业大学学报》 EI CAS CSCD 北大核心 2002年第1期101-104,共4页
针对控制器Windup问题 ,提出了一种基于滤波器的Anti-Windup设计方法 .该方法采用两步设计技术 ,通过合理地选取滤波器F(s) ,使系统满足相应的最优设计指标 ,提高了系统的性能 ,有效地解决了某型电动转台伺服系统中存在的控制器Windup问... 针对控制器Windup问题 ,提出了一种基于滤波器的Anti-Windup设计方法 .该方法采用两步设计技术 ,通过合理地选取滤波器F(s) ,使系统满足相应的最优设计指标 ,提高了系统的性能 ,有效地解决了某型电动转台伺服系统中存在的控制器Windup问题 .转台伺服系统实际运行结果验证方法的有效性 ,并说明该方法也适用于类似的一般控制系统的Anti-Windup设计 . 展开更多
关键词 滤波器 anti-windup设计 伺服系统 电动转台 两步设计 控制器 最优设计
下载PDF
Novel two-step process to improve efficiency of bio-oxidation of Axi high-sulfur refractory gold concentrates 被引量:2
11
作者 刘新星 王国华 +4 位作者 霍强 谢建平 李寿朋 武海艳 郭玉洁 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2015年第12期4119-4125,共7页
In order to improve the bio-oxidation efficiency of Axi refractory gold concentrate, a two-step process including a high temperature chemical oxidation and a subsequent bio-oxidation, combined with p H control during ... In order to improve the bio-oxidation efficiency of Axi refractory gold concentrate, a two-step process including a high temperature chemical oxidation and a subsequent bio-oxidation, combined with p H control during the bio-oxidation step was used. The results revealed that the optimum mode was to maintain solution p H at 1.0-1.2 during the biological oxidation stage. Under this condition, the activity of mixed culture could be sustained and the formation of jarosite could be diminished, thus the oxidation efficiency was improved. The oxidation levels of iron and sulfur were improved by 12.50% and 15.49%, and the gold recovery was increased by 21.02%. Therefore, the two-step process combined with p H control is an effective method for oxidizing the biohydrometallurgical process of Axi gold concentrate, and it will have a broad prospect of application in dealing with complex refractory gold concentrate. 展开更多
关键词 gold concentrate BIO-OXIDATION p H control two-step oxidation
下载PDF
永磁同步电机Anti-Windup速度控制器设计 被引量:7
12
作者 齐亮 贾廷纲 侍洪波 《电机与控制应用》 北大核心 2011年第9期17-20,29,共5页
主要针对永磁同步电机(PMSM)磁场定向控制系统中存在非线性饱和问题,分析了PI电机速度控制器Windup现象产生的过程及危害。对传统的Anti-reset Windup PI控制器进行了改进,将比例环节和积分环节对饱和影响进行了分离,从而使反馈补偿更... 主要针对永磁同步电机(PMSM)磁场定向控制系统中存在非线性饱和问题,分析了PI电机速度控制器Windup现象产生的过程及危害。对传统的Anti-reset Windup PI控制器进行了改进,将比例环节和积分环节对饱和影响进行了分离,从而使反馈补偿更为准确,有效提升了电机控制系统性能。通过仿真验证了可行性,并将其应用于所开发PMSM驱动控制系统中,在工程应用中取得了很好的控制效果,进一步验证了控制策略的可行性。 展开更多
关键词 永磁同步电机 PI控制器 非线性饱和 anti-windup控制器
下载PDF
永磁同步电动机分数阶Anti-Windup控制器的研究 被引量:5
13
作者 缪仲翠 张昊 +1 位作者 巨梅 张永义 《控制工程》 CSCD 北大核心 2016年第10期1556-1561,共6页
针对采用分数阶PI~λ控制器设计控制系统时引起的积分饱和现象(Windup现象),设计一种分数阶抗积分饱和控制器。根据分数阶积分特性,结合一种Anti-Windup控制器结构对控制器进行设计分析,并采用粒子群算法对控制器参数进行整定。最后将... 针对采用分数阶PI~λ控制器设计控制系统时引起的积分饱和现象(Windup现象),设计一种分数阶抗积分饱和控制器。根据分数阶积分特性,结合一种Anti-Windup控制器结构对控制器进行设计分析,并采用粒子群算法对控制器参数进行整定。最后将分数阶Anti-Windup控制器应用到永磁同步电动机(PMSM)调速系统中,通过仿真分析比较其控制性能。结果表明,分数阶Anti-Windup控制器能够降低系统超调量,提高系统快速性及抗干扰能力,具有良好的鲁棒性,可进一步改善控制系统的控制性能。 展开更多
关键词 分数阶PIλ控制器 WINDUP anti-windup 永磁同步电动机
下载PDF
Optimization of Sporulation Conditions of Biocontrol Bacteria B579 by Two-step Control Strategy 被引量:1
14
作者 张艳春 贾钧辉 +4 位作者 郑宇 陈芳 曾明洁 骆健美 王敏 《Agricultural Science & Technology》 CAS 2011年第2期249-252,共4页
[Objective] For preparing the biopesticide of Bacillus subtilis B579 with high spore concentration,the sporulation conditions were optimized.[Method] Two-step fermentation control strategy was used,in which,the first ... [Objective] For preparing the biopesticide of Bacillus subtilis B579 with high spore concentration,the sporulation conditions were optimized.[Method] Two-step fermentation control strategy was used,in which,the first phase(0-10 h)was to improve cell growth,and the second phase(10-30 h)was to promote spore formation.Four factors including initial glucose concentration,fermentation pH,temperature(in the second phase)and shaking speed(in the second phase)were optimized using the methods of single factor test and orthogonal experiment.[Result] The initial glucose concentration showed a significant effect on sporulation.The optimal conditions for the spore formation of B.subtilis B579 were as follows:initial glucose concentration 5 g/L,fermentation pH 7.0,the temperature for the first phase 37 ℃,and the shaking speed for the first phase 180 r/min,the temperature for the second phase 40 ℃,and the shaking speed for the second phase 200 r/min;in addition,the first phase was 10 h and the second phase of fermentation was conducted for 30 h.Under such conditions,the spore concentration and spore formation rate could reach 9.43×108 CFU/ml and 90.99%,respectively,which represented 6.70-fold and 2.43-fold increase compared with those before optimization.[Conclusion] The spores concentration of biocontrol agent was improved using two-step control strategy,which provided the basis for biopesticide production in large scale. 展开更多
关键词 Bacillus subtilis Biocontrol bacteria SPORULATION two-step control strategy FERMENTATION
下载PDF
Accelerated Sequential Deposition Reaction via Crystal Orientation Engineering for Low-Temperature,High-Efficiency Carbon-Electrode CsPbBr_(3) Solar Cells 被引量:1
15
作者 Zeyang Zhang Weidong Zhu +10 位作者 Tianjiao Han Tianran Wang Wenming Chai Jiaduo Zhu He Xi Dazheng Chen Gang Lu Peng Dong Jincheng Zhang Chunfu Zhang Yue Hao 《Energy & Environmental Materials》 SCIE EI CAS CSCD 2024年第1期168-175,共8页
Low-temperature,ambient processing of high-quality CsPbBr_(3)films is demanded for scalable production of efficient,low-cost carbon-electrode perovskite solar cells(PSCs).Herein,we demonstrate a crystal orientation en... Low-temperature,ambient processing of high-quality CsPbBr_(3)films is demanded for scalable production of efficient,low-cost carbon-electrode perovskite solar cells(PSCs).Herein,we demonstrate a crystal orientation engineering strategy of PbBr_(2)precursor film to accelerate its reaction with CsBr precursor during two-step sequential deposition of CsPbBr_(3)films.Such a novel strategy is proceeded by adding CsBr species into PbBr_(2)precursor,which can tailor the preferred crystal orientation of PbBr_(2)film from[020]into[031],with CsBr additive staying in the film as CsPb_(2)Br_(5)phase.Theoretical calculations show that the reaction energy barrier of(031)planes of PbBr_(2)with CsBr is lower about 2.28 eV than that of(O2O)planes.Therefore,CsPbBr_(3)films with full coverage,high purity,high crystallinity,micro-sized grains can be obtained at a low temperature of 150℃.Carbon-electrode PSCs with these desired CsPbBr_(3)films yield the record-high efficiency of 10.27%coupled with excellent operation stability.Meanwhile,the 1 cm^(2)area one with the superior efficiency of 8.00%as well as the flexible one with the champion efficiency of 8.27%and excellent mechanical bending characteristics are also achieved. 展开更多
关键词 carbon-electrode perovskite solar cells crystal orientation engineering CsPbBr_(3) low temperature two-step sequential deposition
下载PDF
Arrhenius relationship and two-step scheme in AF hyperdynamics simulation of diffusion of Mg/Zn interface 被引量:1
16
作者 吴永全 陆秀明 沈通 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2013年第2期508-516,共9页
The accelerating factor (AF) method is a simple and appropriate way to investigate the atomic long-time deep diffusion at solid-solid interface. In the framework of AF hyperdynamics (HD) simulation, the relationsh... The accelerating factor (AF) method is a simple and appropriate way to investigate the atomic long-time deep diffusion at solid-solid interface. In the framework of AF hyperdynamics (HD) simulation, the relationship between the diffusion coefficient along the direction of z-axis which is normal to the Mg/Zn interface and temperature was investigated, and the AF's impact on the diffusion constant (D0) and activation energy (Q^*) was studied. Then, two steps were taken to simulate the atomic diffusion process and the formation of new phases: one for acceleration and the other for equilibration. The results show that: the Arrhenius equation works well for the description of Dz with different accelerating factors; the AF has no effect on the diffusion constant Do in the case of no phase transition; and the relationship between Q* and Q conforms to Q^*=Q/A. Then, the new Arrhenius equation for AFHD is successfully constructed as Dz=Doexp[-Q/(ART)]. Meanwhile, the authentic equilibrium conformations at any dynamic moment can only be reproduced by the equilibration simulation of the HD-simulated configurations. Key words: accelerating factor method; Arrhenius equation; two-steps scheme; Mg/Zn interface; hyperdynamic simulation 展开更多
关键词 accelerating factor method Arrhenius equation two-steps scheme Mg/Zn interface hyperdynamic simulation
下载PDF
基于FPGA的永磁同步电机速度控制
17
作者 于长松 刘曰涛 +2 位作者 姜佩岑 邹大林 祝保财 《组合机床与自动化加工技术》 北大核心 2024年第4期131-134,140,共5页
针对永磁同步电机(PMSM)速度控制器中采用传统PI控制存在响应速度慢、超调量大以及容易出现积分饱和等问题,设计了采取Anti-Windup策略的速度控制器,并在现场可编辑逻辑门阵列(FPGA)中实现对PMSM的控制。首先采用高层次综合技术(HLS)对P... 针对永磁同步电机(PMSM)速度控制器中采用传统PI控制存在响应速度慢、超调量大以及容易出现积分饱和等问题,设计了采取Anti-Windup策略的速度控制器,并在现场可编辑逻辑门阵列(FPGA)中实现对PMSM的控制。首先采用高层次综合技术(HLS)对PMSM伺服控制关键模块完成建模,其次封装成IP核导入到工程中,最后下载到FPGA芯片上完成对PMSM的控制。经过与传统PI控制器实验比较,使用该速度控制方法超调量减小到4.3%,在负载处转速下降了14r/min,调节时间为0.01s,具有良好的动态性能和抗干扰性能,满足永磁同步电机伺服控制系统的应用需求。 展开更多
关键词 现场可编辑逻辑门阵列 高层次综合技术 永磁同步电机 anti-windup策略
下载PDF
居民消费结构转型升级的碳减排效应研究
18
作者 王东红 任金垚 +2 位作者 潘曼 刘赋仪 付汉星 《商业经济研究》 北大核心 2024年第2期46-50,共5页
降低各地区的碳排放强度对于“双碳”目标的实现具有重要意义。近年来,我国居民消费结构发生了重大变化,居民消费结构转型升级对碳排放强度有显著影响。本文采用2000-2020年我国30个省级地区的空间面板样本数据,利用动态面板模型研究了... 降低各地区的碳排放强度对于“双碳”目标的实现具有重要意义。近年来,我国居民消费结构发生了重大变化,居民消费结构转型升级对碳排放强度有显著影响。本文采用2000-2020年我国30个省级地区的空间面板样本数据,利用动态面板模型研究了居民消费结构转型对碳排放强度是否存在非线性影响机制;对产业结构能否充当中介变量进行分析,对东中西部地区的异质性进行了研究;研究表明居民消费结构对碳排放强度能够产生明显的抑制效果,东部地区的影响更为显著,并且产业结构能够作为中介效应影响碳排放强度。本研究结论与政策启示对于居民消费结构转型升级实现“双碳”目标具有一定的现实意义。 展开更多
关键词 碳减排 居民消费结构 产业结构 动态面板模型(two-step SYS-GMM)
下载PDF
基于Anti-Windup回馈推力矢量飞行控制系统研究
19
作者 杨常伟 陈杰 《弹箭与制导学报》 CSCD 北大核心 2014年第2期29-32,共4页
针对带推力矢量飞机大迎角机动飞行控制问题,文中主要研究推力矢量与气动舵面融合控制策略问题。结合串级链式推力矢量控制分配和Anti-Windup抗饱和控制结构,提出了一种基于Anti-Windui回馈推力矢量飞行控制系统设计结构,该控制策略合... 针对带推力矢量飞机大迎角机动飞行控制问题,文中主要研究推力矢量与气动舵面融合控制策略问题。结合串级链式推力矢量控制分配和Anti-Windup抗饱和控制结构,提出了一种基于Anti-Windui回馈推力矢量飞行控制系统设计结构,该控制策略合理分配操纵面的偏转指令,实现推力矢量和气动舵面的协调偏转。仿真结果表明,采用Anti-Windup抗饱和控制结构的推力矢量/气动舵面控制融合结构,对完成飞机在纵向平面内的过失速机动动作,有更好的控制效果。 展开更多
关键词 anti-windup 推力矢量 飞行控制 大迎角机动
下载PDF
Socioeconomic traits and the risk of Barrett’s esophagus and gastroesophageal reflux disease: A Mendelian randomization study
20
作者 Yu-Xin Liu Cheng-Li Bin +2 位作者 Lu Zhang Wen-Tao Yang Bai-Ping An 《World Journal of Gastrointestinal Oncology》 SCIE 2024年第6期2631-2645,共15页
BACKGROUND Previous observational studies have shown that the prevalence of gastroesophageal reflux disease(GERD)and Barrett’s esophagus(BE)is associated with socioeconomic status.However,due to the methodological li... BACKGROUND Previous observational studies have shown that the prevalence of gastroesophageal reflux disease(GERD)and Barrett’s esophagus(BE)is associated with socioeconomic status.However,due to the methodological limitations of traditional observational studies,it is challenging to definitively establish causality.AIM To explore the causal relationship between the prevalence of these conditions and socioeconomic status using Mendelian randomization(MR).METHODS We initially screened single nucleotide polymorphisms(SNPs)to serve as proxies for eight socioeconomic status phenotypes for univariate MR analysis.The inverse variance weighted(IVW)method was used as the primary analytical method to estimate the causal relationship between the eight socioeconomic status phenotypes and the risk of GERD and BE.We then collected combinations of SNPs as composite proxies for the eight socioeconomic phenotypes to perform multivariate MR(MVMR)analyses based on the IVW MVMR model.Furthermore,a two-step MR mediation analysis was used to examine the potential mediation of the associations by body mass index,major depressive disorder(MDD),smoking,alcohol consumption,and sleep duration.RESULTS The study identified three socioeconomic statuses that had a significant impact on GERD.These included household income[odds ratio(OR):0.46;95% confidence interval(95%CI):0.31-0.70],education attainment(OR:0.23;95%CI:0.18-0.29),and the Townsend Deprivation Index at recruitment(OR:1.57;95%CI:1.04-2.37).These factors were found to independently and predominantly influence the genetic causal effect of GERD.Furthermore,the mediating effect of educational attainment on GERD was found to be mediated by MDD(proportion mediated:10.83%).Similarly,the effect of educational attainment on BE was mediated by MDD(proportion mediated:10.58%)and the number of cigarettes smoked per day(proportion mediated:3.50%).Additionally,the mediating effect of household income on GERD was observed to be mediated by sleep duration(proportion mediated:9.75%)CONCLUSION This MR study shed light on the link between socioeconomic status and GERD or BE,providing insights for the prevention of esophageal cancer and precancerous lesions. 展开更多
关键词 Socioeconomic status Gastroesophageal reflux disease Barrett’s esophagus two-step Mendelian randomization Multivariate Mendelian randomization
下载PDF
上一页 1 2 14 下一页 到第
使用帮助 返回顶部