Mechanism of selective laser trabeculoplasty:a systemic review

Although selective laser trabeculoplasty(SLT)is a recognized method for the treatment of glaucoma,the exact changes in the target tissue and mechanism for its intraocular pressure lowing effect are still unclear.The purpose of this review is to summarize the potential mechanisms of SLT on trabecular meshwork both in vivo and in vitro,so as to reveal the potential mechanism of SLT.SLT may induce immune or inflammatory response in trabecular meshwork(TM)induced by possible oxidative damage etc,and remodel extracellular matrix.It may also induce monocytes to aggregate in TM tissue,increase Schlemm’s canal(SC)cell conductivity,disintegrate cell junction and promote permeability through autocrine and paracrine forms.This provides a theoretical basis for SLT treatment in glaucoma.

Single atom doping induced charge-specific distribution of Cu1-TiO_(2)for selective aniline oxidation via a new mechanism

Utilizing single atom sites doping into metal oxides to modulate their intrinsic active sites,achieving precise selectivity control in complex organic reactions,is a highly desirable yet challenging endeavor.Meanwhile,identifying the active site also represents a significant obstacle,primarily due to the intricate electronic environment of single atom site doped metal oxide.Herein,a single atom Cu doped TiO_(2)catalyst(Cu_(1)-TiO_(2))is prepared via a simple“colloid-acid treatment”strategy,which switches aniline oxidation selectivity of TiO_(2)from azoxybenzene to nitrosobenzene,without using additives or changing solvent,while other metal or nonmetal doped TiO_(2)did not possess.Comprehensive mechanistic investigations and DFT calculations unveil that Ti-O active site is responsible for triggering the aniline to form a new PhNOH intermediate,two PhNOH condense to azoxybenzene over TiO_(2)catalyst.As for Cu_(1)-TiO_(2),the charge-specific distribution between the isolated Cu and TiO_(2)generates unique Cu_(1)-O-Ti hybridization structure with nine catalytic active sites,eight of them make PhNOH take place spontaneous dissociation to produce nitrosobenzene.This work not only unveils a new mechanistic pathway featuring the PhNOH intermediate in aniline oxidation for the first time but also presents a novel approach for constructing single-atom doped metal oxides and exploring their intricate active sites.

Crack elimination and strength enhancement mechanisms of selective laser melted Si-modified Al−Mn−Mg−Er−Zr alloy

In order to increase the processability and process window of the selective laser melting(SLM)-fabricated Al−Mn−Mg−Er−Zr alloy,a novel Si-modified Al−Mn−Mg−Er−Zr alloy was designed.The effect of Si alloying on the surface quality,processability,microstructure,and mechanical properties of the SLM-fabricated alloy was studied.The results showed that introducing Si into the Al−Mn−Mg−Er−Zr alloy prevented balling and keyhole formation,refined the grain size,and reduced the solidification temperature,which eliminated cracks and increased the processability and process window of the alloy.The maximum relative density of the SLM-fabricated Si/Al−Mn−Mg−Er−Zr alloy reached 99.6%.The yield strength and ultimate tensile strength of the alloy were(371±7)MPa and(518±6)MPa,respectively.These values were higher than those of the SLM-fabricated Al−Mn−Mg−Er−Zr and other Sc-free Al−Mg-based alloys.

A critical review towards the causes of the iron-based catalysts deactivation mechanisms in the selective oxidation of hydrogen sulfide to elemental sulfur from biogas

Hydrogen sulfide(H_(2)S) not only presents significant environmental concerns but also induces severe corrosion in industrial equipment,even at low concentrations.Among various technologies,the selective oxidation of hydrogen sulfide(SOH_(2)S) to elemental sulfur(S) has emerged as a sustainable and environmentally friendly solution.Due to its unique properties,iron oxide has been extensively investigated as a catalyst for SOH_(2)S;however,rapid deactivation has remained a significant drawback.The causes of iron oxide-based catalysts deactivation mechanisms in SOH_(2)S,including sulfur or sulfate deposition,the transformation of iron species,sintering and excessive oxygen vacancy formation,and active site loss,are thoroughly examined in this review.By focusing on the deactivation mechanisms,this review aims to provide valuable insights into enhancing the stability and efficiency of iron-based catalysts for SOH_(2)S.

Microstructure,Properties and Crack Suppression Mechanism of High-speed Steel Fabricated by Selective Laser Melting at Different Process Parameters

To enrich material types applied to additive manufacturing and enlarge application scope of additive manufacturing in conformal cooling tools,M2 high-speed steel specimens were fabricated by selective laser melting(SLM).Effects of SLM parameters on the microstructure and mechanical properties of M2 high-speed steel were investigated.The results showed that substrate temperature and energy density had significant influence on the densification process of materials and defects control.Models to evaluate the effect of substrate temperature and energy density on hardness were studied.The optimized process parameters,laser power,scan speed,scan distance,and substrate temperature,for fabricated M2 are 220 W,960 mm/s,0.06 mm,and 200℃,respectively.Based on this,the hardness and tensile strength reached 60 HRC and 1000 MPa,respectively.Interlaminar crack formation and suppression mechanism and the relationship between temperature gradient and thermal stress were illustrated.The inhibition effect of substrate temperature on the cracks generated by residual stresses was also explained.AM showed great application potential in the field of special conformal cooling cutting tool preparation.

Test selection and optimization for PHM based on failure evolution mechanism model

The test selection and optimization （TSO） can improve the abilities of fault diagnosis, prognosis and health-state evalua- tion for prognostics and health management （PHM） systems. Traditionally, TSO mainly focuses on fault detection and isolation, but they cannot provide an effective guide for the design for testability （DFT） to improve the PHM performance level. To solve the problem, a model of TSO for PHM systems is proposed. Firstly, through integrating the characteristics of fault severity and propa- gation time, and analyzing the test timing and sensitivity, a testability model based on failure evolution mechanism model （FEMM） for PHM systems is built up. This model describes the fault evolution- test dependency using the fault-symptom parameter matrix and symptom parameter-test matrix. Secondly, a novel method of in- herent testability analysis for PHM systems is developed based on the above information. Having completed the analysis, a TSO model, whose objective is to maximize fault trackability and mini- mize the test cost, is proposed through inherent testability analysis results, and an adaptive simulated annealing genetic algorithm （ASAGA） is introduced to solve the TSO problem. Finally, a case of a centrifugal pump system is used to verify the feasibility and effectiveness of the proposed models and methods. The results show that the proposed technology is important for PHM systems to select and optimize the test set in order to improve their performance level.

A Novel Bidirectional LSTM and Attention Mechanism Based Neural Network for Answer Selection in Community Question Answering

Deep learning models have been shown to have great advantages in answer selection tasks.The existing models,which employ encoder-decoder recurrent neural network(RNN),have been demonstrated to be effective.However,the traditional RNN-based models still suffer from limitations such as 1)high-dimensional data representation in natural language processing and 2)biased attentive weights for subsequent words in traditional time series models.In this study,a new answer selection model is proposed based on the Bidirectional Long Short-Term Memory(Bi-LSTM)and attention mechanism.The proposed model is able to generate the more effective question-answer pair representation.Experiments on a question answering dataset that includes information from multiple fields show the great advantages of our proposed model.Specifically,we achieve a maximum improvement of 3.8%over the classical LSTM model in terms of mean average precision.

Establishment of Knowledge Base Management System and the Type Selection of Mechanism for Mechanism Kinematic Scheme

Firstly data standardization technology and combined classification method have been applied to carry out classification of kinematic behaviors and mechanisms in the mapping field between the kinematic behavior level and the mechanism level of conceptual design.The principle of computer coding and storing have been built to give a fast and broad selection of mechanisms that meets the requirements of basic motion characters.Then on the basis of mentioned above,the heuristic matching propagation principle (HMPP) of kinematic behaviors and its true table serves as a guide to perform mechanism types selection.Finally an application is given to indicate its practicability and effectiveness.

Logical Framework,Path Selection and Mechanism Design for Cultivation of New Type Professional Farmers

New type professional farmers are farmers who possess certain resources and capitals,have certain extent of spirit of entrepreneurship,and are fully capable of obtaining and allocating resources related to agricultural production and management,and engaged in agricultural production and management for obtaining average profit.Cultivation of new type professional farmers should be promoted in the process and at the background of"coordinated development of industrialization,informationization,urbanization and agricultural modernization".It should establish a proper cultivation subject system consisting of government,enterprises,rural communities and nonprofit organizations.Relying on multiple motive forces,efforts should be concentrated on cultivating those farmers with enterprising,highly innovative and learning ability,to guide traditional farmers to change into learning,enterprising and innovative ones.In addition,cultivation of new type professional farmers must rely on farmer education and training,modern agricultural development,increase in agricultural comparative advantage,innovation of rural management system and mechanism,multiple types of agricultural operation on a fairly large scale,as well as construction and regulation of new rural communities.Finally,it is recommended to provide system guarantee from long-term input mechanism of new type professional farmer education and training,incentive and restrictive mechanism of new type professional farmer cultivation,and construction of favorable environment for agricultural entrepreneurship.

Tension-compression asymmetry and corresponding deformation mechanism in ZA21 magnesium bars with bimodal structure

We investigated the asymmetric tension-compression(T-C)behavior of ZA21 bars with bimodal and uniform structures through axial tension and compression tests.The results show that the yield strengths of bars having bimodal structure are 206.42 and 140.28 MPa under tension and compression,respectively,which are higher than those of bars having uniform structure with tensile and compressive yield strength of 183.71 and 102.86 MPa,respectively.Prismatic slip and extension twinning under tension and basal slip and extension twinning under compression dominate the yield behavior and induce the T-C asymmetry.However,due to the basal slip activated in fine grains under tension and the inhibition of extension twinning by fine grains under compression,the bimodal structure possesses a lower T-C asymmetry(0.68)compared to the uniform structure(0.56).Multiple extension twins occur during deformation,and the selection of twin variants depends on the Schmid factor of the six variants activated by parent grains.Furthermore,the strengthening effect of the bimodal structure depends on the grain size and the ratio of coarse and fine grains.

Defect Formation Mechanisms in Selective Laser Melting:A Review

Defect formation is a common problem in selective laser melting （SLM）. This paper provides a review of defect formation mechanisms in SLM. It sum- marizes the recent research outcomes on defect findings and classification, analyzes formation mechanisms of the common defects, such as porosities, incomplete fusion holes, and cracks. The paper discusses the effect of the process parameters on defect formation and the impact of defect formation on the mechanical properties of a fabri- cated part. Based on the discussion, the paper proposes strategies for defect suppression and control in SLM.

Multi-objective optimization in highway pavement maintenance and rehabilitation project selection and scheduling:A state-of-the-art review

The motivation for cost-effective management of highway pavements is evidenced not only by the massive expenditures associated with these activities at a national level but also by the consequences of poor pavement condition on road users.This paper presents a state-of-the-art review of multi-objective optimization(MOO)problems that have been formulated and solution techniques that have been used in selecting and scheduling highway pavement rehabilitation and maintenance activities.First,the paper presents a taxonomy and hierarchy for these activities,the role of funding sources,and levels of jurisdiction.The paper then describes how three different decision mechanisms have been used in past research and practice for project selection and scheduling(historical practices,expert opinion,and explicit mathematical optimization)and identifies the pros and cons of each mechanism.The paper then focuses on the optimization mechanism and presents the types of optimization problems,formulations,and objectives that have been used in the literature.Next,the paper examines various solution algorithms and discusses issues related to their implementation.Finally,the paper identifies some barriers to implementing multi-objective optimization in selecting and scheduling highway pavement rehabilitation and maintenance activities,and makes recommendations to overcome some of these barriers.

Joint power control and relay selection scheme for cognitive two-way relay networks

A joint power control and relay selection scheme is considered for a cooperative and cognitive radio system where a secondary network shares spectrum with the primary network. In the secondary network, two secondary users （SUs） communicate with each other via an assist relay. The main point is to provide the best system performance to SUs while maintaining the interference power at primary user （PU） under a certain level. Using convex optimization, a closed-form solution is obtained when optimizing the power allocation among the two nodes and relay. Based on this result, a joint power control and relay selection scheme with fewer variable dimensions is proposed to maximize the achievable rate of the secondary system. Simulation results demonstrate that the sum rate of the cognitive two-way relay network increases compared with a random relay selection and fixed power allocation.

Enzyme‐like mechanism of selective toluene oxidation to benzaldehyde over organophosphoric acid‐bonded nano‐oxides

The completely selective oxidation of toluene to benzaldehyde with dioxygen,without the need touse H_(2)O_(2),halogens,or any radical initiators,is a reaction long desired but never previously successful.Here,we demonstrate the enzyme‐like mechanism of the reaction over hexadecylphosphateacid(HDPA)‐bonded nano‐oxides,which appear to interact with toluene through specific recognition.The active sites of the catalyst are related to the ability of HDPA to change its bonding to theoxides between monodentate and bidentate during the reaction cycle.This greatly enhances themobility of the crystal oxygen or the reactivity of the catalyst,specifically in toluene transformations.The catalytic cycle of the catalyst is similar to that of methane monooxygenase.In thepresence of catalyst and through O_(2)oxidation,the conversion of toluene to benzaldehyde is initiatedat 70°C.We envision that this novel mechanism reveals alternatives for an attractive route to designhigh‐performance catalysts with bioinspired structures.

Detection of Insider Selective Forwarding Attack Based on Monitor Node and Trust Mechanism in WSN

The security problems of wireless sensor networks (WSN) have attracted people’s wide attention. In this paper, after we have summarized the existing security problems and solutions in WSN, we find that the insider attack to WSN is hard to solve. Insider attack is different from outsider attack, because it can’t be solved by the traditional encryption and message authentication. Therefore, a reliable secure routing protocol should be proposed in order to defense the insider attack. In this paper, we focus on insider selective forwarding attack. The existing detection mechanisms, such as watchdog, multipath retreat, neighbor-based monitoring and so on, have both advantages and disadvantages. According to their characteristics, we proposed a secure routing protocol based on monitor node and trust mechanism. The reputation value is made up with packet forwarding rate and node’s residual energy. So this detection and routing mechanism is universal because it can take account of both the safety and lifetime of network. Finally, we use OPNET simulation to verify the performance of our algorithm.

High-strength and thermally stable TiB_(2)-modified Al-Mn-Mg-Er-Zr alloy fabricated via selective laser melting

To increase the processability and plasticity of the selective laser melting(SLM)fabricated Al-Mn-Mg-Er-Zr alloys,a novel TiB_(2)-modified Al-Mn-Mg-Er-Zr alloy with a mixture of Al-Mn-Mg-Er-Zr and nano-TiB_(2) powders was fabricated by SLM.The pro-cessability,microstructure,and mechanical properties of the alloy were systematically investigated by density measurement,microstruc-ture characterization,and mechanical properties testing.The alloys fabricated at 250 W displayed higher relative densities due to a uni-formly smooth top surface and appropriate laser energy input.The maximum relative density value of the alloy reached(99.7±0.1)%,demonstrating good processability.The alloy exhibited a duplex grain microstructure consisting of columnar regions primarily and equiaxed regions with TiB_(2),Al6Mn,and Al3Er phases distributed along the grain boundaries.After directly aging treatment at a high tem-perature of 400℃,the strength of the SLM-fabricated TiB_(2)/Al-Mn-Mg-Er-Zr alloy increased due to the precipitation of the secondary Al6Mn phases.The maximum yield strength and ultimate tensile strength of the aging alloy were measured to be(374±1)and(512±13)MPa,respectively.The SLM-fabricated TiB_(2)/Al-Mn-Mg-Er-Zr alloy demonstrates exceptional strength and thermal stability due to the synergistic effects of the inhibition of grain growth,the incorporation of TiB_(2) nanoparticles,and the precipitation of secondary Al6Mn nanoparticles.

Strength and plasticity improvement induced by strong grain refinement after Zr alloying in selective laser-melted AlSiMg1.4 alloy

In order to enhance the mechanical properties of the selective laser-melted(SLM) high-Mg content AlSiMg1.4 alloy,the Zr element was introduced.The influence of Zr alloying on the processability,microstructure,and mechanical properties of the alloy was systematically investigated through performing microstructure analysis and tensile testing.It was demonstrated that the SLM-fabricated AlSiMg1.4-Zr alloy exhibited high process stability with a relative density of over 99.5% at various process parameters.Besides,the strong grain refinement induced by the primary Al3Zr particle during the melt solidification process simultaneously enhanced both the strength and plasticity of the alloy.The values for the yield strength,ultimate tensile strength,and elongation of the SLM-fabricated AlSiMg1.4-Zr were(343±3) MPa,(485±4) MPa,and(10.2±0.2)%,respectively,demonstrating good strengthplasticity synergy in comparison to the AlSiMg1.4 and other Al-Si-based alloys fabricated by SLM.

Inhibition of hepatitis B virus via selective apoptosis modulation by Chinese patent medicine Liuweiwuling Tablet

BACKGROUND Liuweiwuling Tablet(LWWL)is a Chinese patent medicine approved for the treatment of chronic inflammation caused by hepatitis B virus(HBV)infection.Previous studies have indicated an anti-HBV effect of LWWL,specifically in terms of antigen inhibition,but the underlying mechanism remains unclear.AIM To investigate the potential mechanism of action of LWWL against HBV.METHODS In vitro experiments utilized three HBV-replicating and three non-HBV-replicating cell lines.The in vivo experiment involved a hydrodynamic injectionmediated mouse model with HBV replication.Transcriptomics and metabolomics were used to investigate the underlying mechanisms of action of LWWL.RESULTS In HepG2.1403F cells,LWWL(0.8 mg/mL)exhibited inhibitory effects on HBV DNA,hepatitis B surface antigen and pregenomic RNA(pgRNA)at rates of 51.36%,24.74%and 50.74%,respectively.The inhibition rates of LWWL(0.8mg/mL)on pgRNA/covalently closed circular DNA in HepG2.1403F,HepG2.2.15 and HepG2.A64 cells were 47.78%,39.51%and 46.74%,respectively.Integration of transcriptomics and metabolomics showed that the anti-HBV effect of LWWL was primarily linked to pathways related to apoptosis(PI3K-AKT,CASP8-CASP3 and P53 pathways).Apoptosis flow analysis revealed that the apoptosis rate in the LWWL-treated group was significantly higher than in the control group(CG)among HBV-replicating cell lines,including HepG2.2.15(2.92%±1.01%vs 6.68%±2.04%,P<0.05),HepG2.A64(4.89%±1.28%vs 8.52%±0.50%,P<0.05)and HepG2.1403F(3.76%±1.40%vs 7.57%±1.35%,P<0.05)(CG vs LWWL-treated group).However,there were no significant differences in apoptosis rates between the non-HBV-replicating HepG2 cells(5.04%±0.74%vs 5.51%±1.57%,P>0.05),L02 cells(5.49%±0.80%vs 5.48%±1.01%,P>0.05)and LX2 cells(6.29%±1.54%vs 6.29%±0.88%,P>0.05).TUNEL staining revealed a significantly higher apoptosis rate in the LWWL-treated group than in the CG in the HBVreplicating mouse model,while no noticeable difference in apoptosis rates between the two groups was observed in the non-HBV-replicating mouse model.CONCLUSION Preliminary results suggest that LWWL exerts a potent inhibitory effect on wild-type and drug-resistant HBV,potentially involving selective regulation of apoptosis.These findings offer novel insights into the anti-HBV activities of LWWL and present a novel mechanism for the development of anti-HBV medications.

Covalency competition induced selective bond breakage and surface reconstruction in manganese cobaltite towards enhanced electrochemical charge storage

Manganese cobaltite(MnCo_(2)_(4))is a promising electrode material because of its attractive redox chemistry and excellent charge storage capability.Our previous work demonstrated that the octahedrally-coordinated Mn are prone to react with the hydroxyl ions in alkaline electrolyte upon electrochemical cycling and separates on the surface of spinel to reconstruct into d-MnO_(2) nanosheets irreversibly,thus results in a change of the reaction mechanism with Kþion intercalation.However,the low capacity has greatly limited its practical application.Herein,we found that the tetrahedrally-coordinated Co_(2) þions were leached when MnCo_(2)_(4) was equilibrated in 1 mol L^(-1) HCl solution,leading to the formation of layered CoOOH on MnCo_(2)_(4) surface which is originated from the covalency competition induced selective breakage of the CoT–O bond in CoT–O–CoO and subsequent rearrangement of free Co_(6) octahedra.The as-formed CoOOH is stable upon cycling in alkaline electrolyte,exhibits conversion reaction mechanism with facile proton diffusion and is free of massive structural evolution,thus enables utilization of the bulk electrode material and realizes enhanced specific capacity as well as facilitated charge transfer and ion diffusion.In general,our work not only offers a feasible approach to deliberate modification of MnCo_(2)_(4)'s surface structure,but also provides an in-depth understanding of its charge storage mechanism,which enables rational design of the spinel oxides with promising charge storage properties.

Responses to two-way selection on growth in mass-spawned F_1 progeny of Argopecten irradians concentricus(Say)

In the present study, the effect of one-generation divergent selection on the growth and survival of the bay scallop （Argopecten irradians concentricus） was examined to evaluate the efficacy of a selection program currently being carried out in Beibu Bay in the South China Sea. A total of 146 adult scallops were randomly selected from the same cultured population ofA. i. concentricus, and divided into two groups in shell length （anterior-posterior measurement）： large （4.91-6.02 cm, n=74） and small （3.31-4.18 cm, n=72）. At the same time, a control group was also randomly sampled （4.21-4.88 cm, n=80）. Mass-spawned F1 progenies from the three size groups were obtained and reared under identical conditions at all growth phases. The effects of two-way （or upward-downward） selection on fertilization rate, hatching rate, survival rate, daily growth in shell length and body weight were assessed in the three size groups. Results show that significant differences （P〈0.01） were found in hatching rate, survival rate and daily growth of F~ progenies, but not in fertilization rate （P〉0.05）, among the three groups. The hatching rate, survival rate and daily growth of the progeny of large-sized parents were greater than those of the control group （P〈0.05）, which in turn were larger than those of small-sized group （P〈0.05）. Responses to selection by shell length and body weight were 0.32±0.04 cm and 2.18±0.05 g, respectively, for the upward selection, and -0.14±0.03 cm and -2.77±0.06 g, respectively, for the downward selection. The realized heritability estimates of shell length and body weight were 0.38±0.06 cm and 0.22±0.07 g for the upward selection, and 0.24±0.06 cm and 0.37±0.09 g for the downward selection, respectively. The change in growth by bidirectional selection suggests that high genetic variation may be present in the cultured bay scallop population in China.