Determining beam transverse absolute position by triangulation of multi-electrode signal phase differences

Accurate measurement of the transverse position of a beam is crucial in particle accelerators because it plays a key role in determining the beam parameters.Existing methods for beam-position measurement rely on the detection of image currents induced on electrodes or narrow-band wake field induced by a beam passing through a cavity-type structure.However,these methods have limitations.The indirect measurement of multiple parameters is computationally complex,requiring external calibration to determine the system parameters in advance.Furthermore,the utilization of the beam signal information is incomplete.Hence,this study proposes a novel method for measuring the absolute electron beam transverse position.By utilizing the geometric relationship between the center position of the measured electron beam and multiple detection electrodes and by analyzing the differences in the arrival times of the beam signals detected by these electrodes,the absolute transverse position of the electron beam crossing the electrode plane can be calculated.This method features absolute position measurement,a position sensitivity coefficient independent of vacuum chamber apertures,and no requirement for a symmetrical detector electrode layout.The feasibility of this method is validated through numerical simulations and beam experiments.

Ruppert's Delaunay Triangulation Refinement Scheme for Optimal RSUs Placement in Vehicle to Infrastructure Communication Network

Road Side Units(RSUs)are the essential component of vehicular communication for the objective of improving safety and mobility in the road transportation.RSUs are generally deployed at the roadside and more specifically at the intersections in order to collect traffic information from the vehicles and disseminate alarms and messages in emergency situations to the neighborhood vehicles cooperating with the network.However,the development of a predominant RSUs placement algorithm for ensuring competent communication in VANETs is a challenging issue due to the hindrance of obstacles like water bodies,trees and buildings.In this paper,Ruppert’s Delaunay Triangulation Refinement Scheme(RDTRS)for optimal RSUs placement is proposed for accurately estimating the optimal number of RSUs that has the possibility of enhancing the area of coverage during data communication.This RDTRS is proposed by considering the maximum number of factors such as global coverage,intersection popularity,vehicle density and obstacles present in the map for optimal RSUs placement,which is considered as the core improvement over the existing RSUs optimal placement strategies.It is contributed for deploying requisite RSUs with essential transmission range for maximal coverage in the convex map such that each position of the map could be effectively covered by at least one RSU in the presence of obstacles.The simulation experiments of the proposed RDTRS are conducted with complex road traffic environments.The results of this proposed RDTRS confirmed its predominance in reducing the end-to-end delay by 21.32%,packet loss by 9.38%with improved packet delivery rate of 10.68%,compared to the benchmarked schemes.

Reanalysis of energy band structure in the type-II quantum wells

Band structure analysis holds significant importance for understanding the optoelectronic characteristics of semiconductor structures and exploring their potential applications in practice. For quantum well structures, the energy of carriers in the well splits into discrete energy levels due to the confinement of barriers in the growth direction. However, the discrete energy levels obtained at a fixed wave vector cannot accurately reflect the actual energy band structure. In this work, the band structure of the type-II quantum wells is reanalyzed. When the wave vectors of the entire Brillouin region(corresponding to the growth direction) are taken into account, the quantized energy levels of the carriers in the well are replaced by subbands with certain energy distributions. This new understanding of the energy bands of low-dimensional structures not only helps us to have a deeper cognition of the structure, but also may overturn many viewpoints in traditional band theories and serve as supplementary to the band theory of low-dimensional systems.

Application of the Delaunay triangulation interpolation in distortion XRII image

To alleviate the distortion of XRII X-ray image intensifier images in the C-arm CT computer tomography imaging system an algorithm based on the Delaunay triangulation interpolation is proposed.First the causes of the phenomenon the classical correction algorithms and the Delaunay triangulation interpolation are analyzed.Then the algorithm procedure is explained using flow charts and illustrations. Finally experiments are described to demonstrate its effectiveness and feasibility. Experimental results demonstrate that the Delaunay triangulation interpolation can have the following effects.In the case of the same center the root mean square distances RMSD and standard deviation STD between the corrected image with Delaunay triangulation interpolation and the ideal image are 5.760 4 ×10 -14 and 5.354 2 ×10 -14 respectively.They increase to 1.790 3 2.388 8 2.338 8 and 1.262 0 1.268 1 1.202 6 after applying the quartic polynomial model L1 and model L2 to the distorted images respectively.The RMSDs and STDs between the corrected image with the Delaunay triangulation interpolation and the ideal image are 2.489 × 10 -13 and 2.449 8 ×10 -13 when their centers do not coincide. When the quartic polynomial model L1 and model L2 are applied to the distorted images they are 1.770 3 2.388 8 2.338 8 and 1.269 9 1.268 1 1.202 6 respectively.

AN INTERPOLATION METHOD BY BIVARIATE CUBIC SPLINES WITH C^2 -JOIN ON TYPE-II TRIANGULARS AT A RECTANGULAR DOMAIN

In this paper, an interpolating method for bivariate cubic splines with C2-join on type-II triangular at a rectangular domain is given, and the approximation degree, inter- polating existence and uniqueness of the cubic splines are studied.

Parameter Optimization of Laser Triangulation Sensor Based On PSD

According to the theory of laser triangulation measurement,it can be used to test not only plane but also curving surface profile. As a non-contact measurement of optic-electro on a single spot,its advantages are high measurement speed,high precision,great anti-jamming,small measurement spot,easy operation,wide application range and so on. Laser triangulation measurement based on PSD makes system perfect with small volume,high sensitivity,low noise,high resolution. The system’s precision is above 0.5%. It shows that with simpler specified PSD software it can be found a convenient way to optimize system design,improve reliability,shrink volume,reduce power and shorten exploitation period.

DELAUNAY TRIANGULATION METHOD OF CURVED SURFACES BASED ON RIEMANNIAN METRIC

A method for quality mesh generation of parametric curved surfaces isproposed. It is shown that the main difference between the proposed method and previous ones is thatour meshing process is done completely in the parametric domains with the guarantee of meshquality. To obtain this aim, the Delaunay method is extended to anisotropic context of 2D domains,and a Riemannian metric map is introduced to remedy the mapping distortion from object space toparametric domain. Compared with previous algorithms, the approach is much simpler, more robust andspeedy. The algorithm is implemented and examples for several geometries are presented todemonstrate the efficiency and validity of the method.

New deghosting method based on generalized triangulation

A new deghosting method based on the generalized triangulation is presented. First, two intersection points corresponding to the emitter position are obtained by utilizing two azimuth angles and two elevation angles from two jammed 3-D radars （or 2-D passive sensors）. Then, hypothesis testing based deghosting method in the multiple target scenarios is proposed using the two intersection points. In order to analyze the performance of the proposed method, the correct association probability of the true targets and the incorrect association probability of the ghost targets are defined. Finally, the Monte Carlo simulations are given for the proposed method compared with the hinge angle method in the cases of both two and three radars. The simulation results show that the proposed method has better performance than the hinge angle method in three radars case.

COMBINED DELAUNAY TRIANGULATION AND ADAPTIVE FINITE ELEMENT METHOD FOR CRACK GROWTH ANALYSIS

The paper presents the utilization of the adaptive Delaunay triangulation in the finite element modeling of two dimensional crack propagation problems, including detailed description of the proposed procedure which consists of the Delaunay triangulation algorithm and an adaptive remeshing technique. The adaptive remeshing technique generates small elements around crack tips and large elements in the other regions. The resulting stress intensity factors and simulated crack propagation behavior are used to evaluate the effectiveness of the procedure. Three sample problems of a center cracked plate, a single edge cracked plate and a compact tension specimen, are simulated and their results assessed.

Triangulation of red sprites observed above a mesoscale convective system in North China

The triangulation of red sprites was obtained, based on concurrent observations over a mesoscale convective system(MCS) in North China from two stations separated by about 450 km. In addition, broadband sferics from the sprite-producing lightning were measured at five ground stations, making it possible to locate and identify the individual causative lightning discharges for different elements in this dancing sprite event. The results of our analyses indicate that the sprites were produced above the trailing stratiform region of the MCS, and their parent strokes were located mainly in the peripheral area of the stratiform. The lateral offset between sprites and causative strokes ranges from a few km to more than 50 km. In a particularly bright sprite, with a distinct halo feature and streamers descending down to an altitude of approximately 48 km, the sprite current signal identified in the electric sferic, measured at a range of about 1,110 km, peaked at approximately 1 ms after the return stroke.

A new insertion sequence for incremental Delaunay triangulation

Incremental algorithm is one of the most popular procedures for constructing Delaunay triangulations （DTs）. However, the point insertion sequence has a great impact on the amount of work needed for the construction of DTs. It affects the time for both point location and structure update, and hence the overall computational time of the triangulation algorithm. In this paper, a simple deterministic insertion sequence is proposed based on the breadth-first-search on a Kd-tree with some minor modifications for better performance. Using parent nodes as search-hints, the proposed insertion sequence proves to be faster and more stable than the Hilbert curve order and biased randomized insertion order （BRIO）, especially for non-uniform point distributions over a wide range of benchmark examples.

Redesign of a conformal boundary recovery algorithm for 3D Delaunay triangulation

Boundary recovery is one of the main obstacles in applying the Delaunay criterion to mesh generation. A stan- dard resolution is to add Steiner points directly at the intersection positions between missing boundaries and triangulations. We redesign the algorithm with the aid of some new concepts, data structures and operations, which make its implementation routine. Furthermore, all possible intersection cases and their solutions are presented, some of which are seldom discussed in the litera- ture. Finally, numerical results are presented to evaluate the performance of the new algorithm.

三角互证(Triangulation)研究方法在教育学研究中的应用

人种学研究中的三角互证(Triangulation)研究方法也可以应用到教育学的研究中,目的是提高研究结果的可信度和有效性。本文将结合笔者的研究经验,讨论三角互证研究方法三个阶段以及研究手段:观察、使用调查问卷以及访问,从而进一步阐释三角互证如何从三个角度避免单一研究方法所带来的数据局限性。

Introducing tree neighbouring relationship factors in forest pattern spatial analysis:weighted Delaunay triangulation method

It is important to quantify and analyze forest spatial patterns for studying biological characteristics,population interaction and the relationship between the population and environment.In this study,the forest spatial structure unit was generated based on the Delaunay triangulation model(DTM),and the weights were generated using the comprehensive values of the tree diameter at breast height,total height and crown width.The distance between neighbors determined by the DTM was weighted to transform the original coordinates of trees into logical coordinates.Then,a weighted spatial pattern(WSP)was developed.After weighting,the neighboring trees were replaced,the replacement ratio was 38.3%,and there was 57.4%of the central tree.Correlation analysis showed that the uniform angle index of the WSP was significantly correlated with the tree size standard deviation under uniformity(r=0.932)and randomness(r=0.711).The DTM method not only considers the spatial distance between trees,but also considers the non-spatial attributes of trees.By changing the spatial topological relation between trees,this method further improves the spatial structure measurement of forest.

ADAPTIVE DELAUNAY TRIANGULATION WITH MULTIDIMENSIONAL DISSIPATION SCHEME FOR HIGH-SPEED COMPRESSIBLE FLOW ANALYSIS

Adaptive Delaunay triangulation is combined with the cell-centered upwinding algorithm to analyze inviscid high-speed compressible flow problems. The multidimensional dissipation scheme was developed and included in the upwinding algorithm for unstructured triangular meshes to improve the computed shock wave resolution. The solution accuracy is further improved by coupling an error estimation procedure to a remeshing algorithm that generates small elements in regions with large change of solution gradients, and at the same time, larger elements in other regions. The proposed scheme is further extended to achieve higher-order spatial and temporal solution accuracy. Efficiency of the combined procedure is evaluated by analyzing supersonic shocks and shock propagation behaviors for both the steady and unsteady high-speed compressible flows.

Research on Algorithm of the Point Set in the Plane Based on Delaunay Triangulation

In the paper, an improved algorithm is presented for Delaunay triangulation of the point-set in the plain. Based on the original algorithm, we propose the notion of removing circle. During the process of triangulation, and the circle dynamically moves, the algorithm which is simple and practical, therefore evidently accelerates the process of searching a new point, while generating a new triangle. Then it shows the effect of the algorithm in the finite element mesh.

A Novel Spatial Clustering Algorithm Based on Delaunay Triangulation

Exploratory data analysis is increasingly more necessary as larger spatial data is managed in electro-magnetic media. Spatial clustering is one of the very important spatial data mining techniques which is the discovery of interesting rela-tionships and characteristics that may exist implicitly in spatial databases. So far, a lot of spatial clustering algorithms have been proposed in many applications such as pattern recognition, data analysis, and image processing and so forth. However most of the well-known clustering algorithms have some drawbacks which will be presented later when ap-plied in large spatial databases. To overcome these limitations, in this paper we propose a robust spatial clustering algorithm named NSCABDT (Novel Spatial Clustering Algorithm Based on Delaunay Triangulation). Delaunay dia-gram is used for determining neighborhoods based on the neighborhood notion, spatial association rules and colloca-tions being defined. NSCABDT demonstrates several important advantages over the previous works. Firstly, it even discovers arbitrary shape of cluster distribution. Secondly, in order to execute NSCABDT, we do not need to know any priori nature of distribution. Third, like DBSCAN, Experiments show that NSCABDT does not require so much CPU processing time. Finally it handles efficiently outliers.

Eccentric error and compensation in rotationally symmetric laser triangulation

Rotationally symmetric triangulation(RST)sensor has more flexibility and less uncertainty limits because of the abaxial rotationally symmetric optical system.But if the incident laser is eccentric,the symmetry of the image will descend,and it will result in the eccentric error especially when some part of the imaged ring is blocked.The model of rotationally symmetric triangulation that meets the Schimpflug condition is presented in this paper.The error from eccentric incident laser is analysed.It is pointed out that the eccentric error is composed of two parts,one is a cosine in circumference and proportional to the eccentric departure factor,and the other is a much smaller quadric factor of the departure.When the ring is complete,the first error factor is zero because it is integrated in whole ring, but if some part of the ring is blocked,the first factor will be the main error.Simulation verifies the result of the a- nalysis.At last,a compensation method to the error when some part of the ring is lost is presented based on neural network.The results of experiment show that the compensation will make the absolute maximum error descend to half,and the standard deviation of error descends to 1/3.

Laser triangulation measurement of the level in a coal silo

Laser triangulation theory was used to develop a novel contact-free method for measuring the coal level in a silo under harsh environmental conditions found in coal mines, such as the presence of dense dust, high humidity, and low illumination. A laser source and a camera were mounted at the top of the silo. The laser spot projected into the silo was imaged by the camera. The pinhole imaging principle allows the level to be found from the lateral shift of the spot image on the sensor. A pre-calibrated look-up table of the coal depth versus spot position was used to obtain the depth. The measurement accuracy depends on the step size used during pre-calibration. The actual application of a device designed according to these principles shows that it is easy to implement. The detection of the coal level in a silo at the low illumination level found in coal mines is demonstrated.

Trimmed Surface Triangulation for Aircraft RCS Computation

An algorithm of trimmed surface triangulation is put forward by using the isoparametric curves of aircraft surfaces to evenly allocate the mesh nodes. Further refinements are made to deal with the trimming loops and ensure the mesh consistency.