Mechanical behaviors of UHTCC after freezing and thawing were investigated,and compared with those of steel fiber reinforced concrete（SFRC）,air-entrained concrete（AEC） and ordinary concrete（OC）.Four point bendin...Mechanical behaviors of UHTCC after freezing and thawing were investigated,and compared with those of steel fiber reinforced concrete（SFRC）,air-entrained concrete（AEC） and ordinary concrete（OC）.Four point bending tests had been applied after different freezing-thawing cycles（0,50,100,150,200 and 300 cycles,respectively）.The results showed that residual flexural strength of UHTCC after 300 freezing-thawing cycles was 10.62 MPa（70% of no freezing thawing ones）,while 1.58 MPa（17% of no freezing thawing ones） for SFRC.Flexural toughness of UHTCC decreased by 17%,while 70% for SFRC comparatively.It has been demonstrated experimentally that UHTCC without any air-entraining agent could resist freezing-thawing and retain its high toughness characteristic in cold environment.Consequently,UHTCC could be put into practice for new-built or retrofit of infrastructures in cold regions.展开更多
A self-compacting ultra-high toughness cementitious composite （UHTCC） reinforced by discontinuous short polyvinyl alcohol （PVA） fibers, which exhibits self-compacting performance in the fresh state and strain-hard...A self-compacting ultra-high toughness cementitious composite （UHTCC） reinforced by discontinuous short polyvinyl alcohol （PVA） fibers, which exhibits self-compacting performance in the fresh state and strain-hardening and multiple cracking behavior in the hardened state, was developed through controlling flow properties of fresh mortar matrix at constant ingredients concentrations determined by micromechanical design and ensuring uniform fibers dispersion. The superplasticizer was utilized to adjust its flow properties in the fresh state. A series of flow tests, including deformability test, flow rate test, and self-placing test, were conducted to characterize and quantify the fluidity performance of fresh mortar matrix and self-compactability of fresh UHTCC. It is revealed that the utilization of superplasticizer is efficient in producing the fresh mortar matrix with desirable fluidity and the resulting self-compacting UHTCC. In addition, results of four point bending tests on the developed self-compacting UHTCC confirm the insensitivity of mechanical performance of self-compacting UHTCC to the presence of external vibrations as well as the flexural characteristics of deformation hardening and multiple cracking.展开更多
Uniaxial compression tests were conducted to characterize the main compressive performance of ultra high toughness cementitious composite （UHTCC） in terms of strength and toughness and to obtain its stress-strain re...Uniaxial compression tests were conducted to characterize the main compressive performance of ultra high toughness cementitious composite （UHTCC） in terms of strength and toughness and to obtain its stress-strain relationships. The compressive strength investigated ranges from 30 MPa to 60 MPa. Complete stress-strain curves were directly obtained, and the strength indexes, including uniaxial compressive strength, compressive strain at peak stress, elastic modulus and Poisson＇s ratio, were calculated. The comparisons between UHTCC and matrix were also carried out to understand the fiber effect on the compressive strength indexes. Three dimensionless toughness indexes were calculated, which either represent its relative improvement in energy absorption capacity because of fiber addition or provide an indication of its behavior relative to a rigid-plastic material. Moreover, two new toughness indexes, which were named as post-crack deformation energy and equivalent compressive strength, were proposed and calculated with the aim at linking up the compressive toughness of UHTCC with the existing design concept of concrete. The failure mode was also given. The study production provides material characteristics for the practical engineering application of UHTCC.展开更多
Fracture behavior is one of the most important,yet still little understood properties of ultra-high performance cementitious composites(UHPCC),a new marine structural engineering material. Research on the fracture and...Fracture behavior is one of the most important,yet still little understood properties of ultra-high performance cementitious composites(UHPCC),a new marine structural engineering material. Research on the fracture and direct tension behavior of UHPCC was carried out.The constitution law of UHPCC was divided into three phases:pre-partial debonding,partial debonding,and pullout phases.A direct tension constitution law was constructed based on the proposed fiber reinforcing parameter as a function of fiber volume fraction,fiber diameter and length,and fiber bonding strength.With the definition of linear crack shape,the energy release rate of UHPCC was derived and the R-curve equation was calculated from this.Loading tests of UHPCC using a three-point bending beam with an initial notch were carried out.The predictions from the proposed R-curve were in good agreement with the test results, indicating that the proposed R-curve accurately describes the fracture resistance of UHPCC.Introduction of a fiber reinforcement parameter bridges the fracture property R-curve and micro-composites’ mechanics parameters together.This has laid the foundation for further research into fracture properties based on micro-mechanics.The proposed tension constitution law and R-curve can be references for future UHPCC fracture evaluation.展开更多
Ultra-high performance cementitious composites (UHPCC) were prepared by replacing 60% of cement with ultra-fine industrial waste powders.The dynamic damage and compressive stress-strain relations of UHPCC were studied...Ultra-high performance cementitious composites (UHPCC) were prepared by replacing 60% of cement with ultra-fine industrial waste powders.The dynamic damage and compressive stress-strain relations of UHPCC were studied using split Hopkinson pressure bar (SHPB).The damage of UHPCC subjected to repeated impact was measured by the ultrasonic pulse velocity method.Results show that the dynamic damage of UHPCC increases linearly with impact times and the abilities of repeated impact resistance of UHPCC are improved with increasing fiber volume fraction.The stress waves on impact were recorded and the average stress,strain and strain rate of UHPCC were calculated based on the wave propagation theory.The effects of strain rate,fibers volume fraction and impact times on the stress-strain relations of UHPCC were studied.Results show that the peak stress and elastic modulus decrease while the strain rate and peak strain increase gradually with increasing impact times.展开更多
In this study,an explicit dynamic constitutive model was established for ultra high toughness cementitious composites(UHTCCs).The model,based on the Holmquist–Johnson–Cook(HJC)model,includes tensile and compressive ...In this study,an explicit dynamic constitutive model was established for ultra high toughness cementitious composites(UHTCCs).The model,based on the Holmquist–Johnson–Cook(HJC)model,includes tensile and compressive damage evolution,hydrostatic pressure,strain rate,and the Lode angle effect.The proposed model was embedded in LS-DYNA software and then comprehensive tests were carried on a hexahedral brick element formulation under uniaxial,biaxial,and triaxial stress states to verify its rationality through comparisons with results determined by the HJC and Karagozian&Case(K&C)models.Finally,the proposed model was used to simulate the damage caused to UHTCC targets subjected to blast by embedded explosive and projectile penetration,and predictions were compared with corresponding experimental results.The results of the numerical simulations showed that our proposed model was more accurate than the HJC model in predicting the size of the crater,penetration depth,and the distribution of cracks inside the target following the blast or high-speed impact loading.展开更多
提出了题示方法测定衢枳壳样品中黄曲霉毒素B1、B2、G1、G2和赭曲霉毒素A的含量。样品经过体积比79∶20∶1的乙腈-水-乙酸混合溶液超声提取,离心,上清液用p H 7.0磷酸盐缓冲液稀释,用复合免疫亲和柱净化,过滤,滤液中的目标物在XDB C18...提出了题示方法测定衢枳壳样品中黄曲霉毒素B1、B2、G1、G2和赭曲霉毒素A的含量。样品经过体积比79∶20∶1的乙腈-水-乙酸混合溶液超声提取,离心,上清液用p H 7.0磷酸盐缓冲液稀释,用复合免疫亲和柱净化,过滤,滤液中的目标物在XDB C18色谱柱上用不同体积比的体积比1∶9的甲醇-5 mmol·L^(-1)乙酸铵混合溶液和体积比9∶1的甲醇-5 mmol·L^(-1)乙酸铵混合溶液的混合溶液分离,电喷雾离子源正离子(ESI+)和多反应监测(MRM)模式检测,同位素内标法定量。结果显示:5种真菌毒素与其同位素内标质量浓度比和对应的峰面积比在一定范围内呈线性关系,检出限为0.05~0.20μg·kg^(-1)。3个加标浓度水平下阴性样品中5种真菌毒素的回收率为82.7%~97.3%,测定值的相对标准偏差(n=6)为5.2%~12%。展开更多
基金Funded by the Key Program of National Natural Science Foundation of China (No.50438010)
文摘Mechanical behaviors of UHTCC after freezing and thawing were investigated,and compared with those of steel fiber reinforced concrete（SFRC）,air-entrained concrete（AEC） and ordinary concrete（OC）.Four point bending tests had been applied after different freezing-thawing cycles（0,50,100,150,200 and 300 cycles,respectively）.The results showed that residual flexural strength of UHTCC after 300 freezing-thawing cycles was 10.62 MPa（70% of no freezing thawing ones）,while 1.58 MPa（17% of no freezing thawing ones） for SFRC.Flexural toughness of UHTCC decreased by 17%,while 70% for SFRC comparatively.It has been demonstrated experimentally that UHTCC without any air-entraining agent could resist freezing-thawing and retain its high toughness characteristic in cold environment.Consequently,UHTCC could be put into practice for new-built or retrofit of infrastructures in cold regions.
基金Funded by the Key Program of the National Natural Science Foundation of China (50438010)the National Natural Science Foundation for Youth(50908029)the Research and Application Program of Key Technologies for Major Constructions in the South-North Water Transfer Project Construction in China (JGZXJJ2006-13)
文摘A self-compacting ultra-high toughness cementitious composite （UHTCC） reinforced by discontinuous short polyvinyl alcohol （PVA） fibers, which exhibits self-compacting performance in the fresh state and strain-hardening and multiple cracking behavior in the hardened state, was developed through controlling flow properties of fresh mortar matrix at constant ingredients concentrations determined by micromechanical design and ensuring uniform fibers dispersion. The superplasticizer was utilized to adjust its flow properties in the fresh state. A series of flow tests, including deformability test, flow rate test, and self-placing test, were conducted to characterize and quantify the fluidity performance of fresh mortar matrix and self-compactability of fresh UHTCC. It is revealed that the utilization of superplasticizer is efficient in producing the fresh mortar matrix with desirable fluidity and the resulting self-compacting UHTCC. In addition, results of four point bending tests on the developed self-compacting UHTCC confirm the insensitivity of mechanical performance of self-compacting UHTCC to the presence of external vibrations as well as the flexural characteristics of deformation hardening and multiple cracking.
基金Funded by the Key Program of National Natural Science Foundation of China( No.50438010)the Research & Application of Key Technology for the South-North Water Transfer Project Construction in China ( JGZXJJ2006-13)
文摘Uniaxial compression tests were conducted to characterize the main compressive performance of ultra high toughness cementitious composite （UHTCC） in terms of strength and toughness and to obtain its stress-strain relationships. The compressive strength investigated ranges from 30 MPa to 60 MPa. Complete stress-strain curves were directly obtained, and the strength indexes, including uniaxial compressive strength, compressive strain at peak stress, elastic modulus and Poisson＇s ratio, were calculated. The comparisons between UHTCC and matrix were also carried out to understand the fiber effect on the compressive strength indexes. Three dimensionless toughness indexes were calculated, which either represent its relative improvement in energy absorption capacity because of fiber addition or provide an indication of its behavior relative to a rigid-plastic material. Moreover, two new toughness indexes, which were named as post-crack deformation energy and equivalent compressive strength, were proposed and calculated with the aim at linking up the compressive toughness of UHTCC with the existing design concept of concrete. The failure mode was also given. The study production provides material characteristics for the practical engineering application of UHTCC.
基金the Center of Concrete Corea,Korea Development and Application of High Performance and Multi-Function Concrete(05-CCT-D11)
文摘Fracture behavior is one of the most important,yet still little understood properties of ultra-high performance cementitious composites(UHPCC),a new marine structural engineering material. Research on the fracture and direct tension behavior of UHPCC was carried out.The constitution law of UHPCC was divided into three phases:pre-partial debonding,partial debonding,and pullout phases.A direct tension constitution law was constructed based on the proposed fiber reinforcing parameter as a function of fiber volume fraction,fiber diameter and length,and fiber bonding strength.With the definition of linear crack shape,the energy release rate of UHPCC was derived and the R-curve equation was calculated from this.Loading tests of UHPCC using a three-point bending beam with an initial notch were carried out.The predictions from the proposed R-curve were in good agreement with the test results, indicating that the proposed R-curve accurately describes the fracture resistance of UHPCC.Introduction of a fiber reinforcement parameter bridges the fracture property R-curve and micro-composites’ mechanics parameters together.This has laid the foundation for further research into fracture properties based on micro-mechanics.The proposed tension constitution law and R-curve can be references for future UHPCC fracture evaluation.
基金supported by the National Natural Science Foundation of China (Grant No.50808101)Jiangsu Provincial Program for Basic Research (Natural Science Foundation) (Grant No.BK2008417)+1 种基金China Postdoctoral Science Foundation (Grant No.20080431100)Excellence Plan "Zijin Star" of NJUST
文摘Ultra-high performance cementitious composites (UHPCC) were prepared by replacing 60% of cement with ultra-fine industrial waste powders.The dynamic damage and compressive stress-strain relations of UHPCC were studied using split Hopkinson pressure bar (SHPB).The damage of UHPCC subjected to repeated impact was measured by the ultrasonic pulse velocity method.Results show that the dynamic damage of UHPCC increases linearly with impact times and the abilities of repeated impact resistance of UHPCC are improved with increasing fiber volume fraction.The stress waves on impact were recorded and the average stress,strain and strain rate of UHPCC were calculated based on the wave propagation theory.The effects of strain rate,fibers volume fraction and impact times on the stress-strain relations of UHPCC were studied.Results show that the peak stress and elastic modulus decrease while the strain rate and peak strain increase gradually with increasing impact times.
基金Project supported by the National Natural Science Foundation of China(Nos.51678522 , 51878601)。
文摘In this study,an explicit dynamic constitutive model was established for ultra high toughness cementitious composites(UHTCCs).The model,based on the Holmquist–Johnson–Cook(HJC)model,includes tensile and compressive damage evolution,hydrostatic pressure,strain rate,and the Lode angle effect.The proposed model was embedded in LS-DYNA software and then comprehensive tests were carried on a hexahedral brick element formulation under uniaxial,biaxial,and triaxial stress states to verify its rationality through comparisons with results determined by the HJC and Karagozian&Case(K&C)models.Finally,the proposed model was used to simulate the damage caused to UHTCC targets subjected to blast by embedded explosive and projectile penetration,and predictions were compared with corresponding experimental results.The results of the numerical simulations showed that our proposed model was more accurate than the HJC model in predicting the size of the crater,penetration depth,and the distribution of cracks inside the target following the blast or high-speed impact loading.
