Ultra fine grinding of the plant tailings of a refractory silver ore was studied using a laboratory type vertical stirred media mill. Preliminary tests confirmed that ultra fine grinding substantially improves the ext...Ultra fine grinding of the plant tailings of a refractory silver ore was studied using a laboratory type vertical stirred media mill. Preliminary tests confirmed that ultra fine grinding substantially improves the extraction of silver from the tailings in cyanide leaching （i.e. 36% Ag extraction rate from the as-received tailings with d80 of 100 μm, c.f. 84% extraction rate after ultra fine grinding of the tailings with ds0 of 1.2 pro）. In the ultra fine grinding tests, the effects of ball diameter （2-4.5 mm）, stirring speed （200-800 r/m/n） and ball charge ratio （50%-80%） on the fineness of grind （ds0, ~tm） were investigated through a Box-Behnken design. Increasing stirrer speed and ball charge ratio decreased fineness of grind while larger balls resulted in the coarser products. The tests demonstrated that a fineness of grind less than 5 μm can be achieved under suitable conditions. Analysis of stress intensity indicated an optimum range of stress intensity of （0.8-2）× 10^- 3 μm for all power inputs.展开更多
The smoothed-particle hydrodynamics(SPH)method was introduced to simulate the quartz glass grinding process with a single grain under micrp-nano scale.To investigate the mechanism of brittle-ductile transition,such fa...The smoothed-particle hydrodynamics(SPH)method was introduced to simulate the quartz glass grinding process with a single grain under micrp-nano scale.To investigate the mechanism of brittle-ductile transition,such factors as the machin-ing depth,grinding force,maximum equivalent stress,and residual stress were analyzed.The simulation results indicate that quartz glass can be machined in a ductile mode under a certain condition.In this paper,the occurrence and propaga-tion of cracks in quartz glass at different grinding depths(0.1-1μm)are observed,and the critical depth of brittle-ductile transformation is 0.36 pum.At different grinding depths,the grinding force ratio is greater than 1.When the cutting depth is 0.4 um,the crack propagation depth is about 1.2μm,which provides a basis for the prediction of subsurface damage depth.In addition,the correctness of the simulation result was verified by carrying out scratch experiments of varying cutting depth on optical quartz glass.展开更多
文摘Ultra fine grinding of the plant tailings of a refractory silver ore was studied using a laboratory type vertical stirred media mill. Preliminary tests confirmed that ultra fine grinding substantially improves the extraction of silver from the tailings in cyanide leaching （i.e. 36% Ag extraction rate from the as-received tailings with d80 of 100 μm, c.f. 84% extraction rate after ultra fine grinding of the tailings with ds0 of 1.2 pro）. In the ultra fine grinding tests, the effects of ball diameter （2-4.5 mm）, stirring speed （200-800 r/m/n） and ball charge ratio （50%-80%） on the fineness of grind （ds0, ~tm） were investigated through a Box-Behnken design. Increasing stirrer speed and ball charge ratio decreased fineness of grind while larger balls resulted in the coarser products. The tests demonstrated that a fineness of grind less than 5 μm can be achieved under suitable conditions. Analysis of stress intensity indicated an optimum range of stress intensity of （0.8-2）× 10^- 3 μm for all power inputs.
基金The authors would like to acknowledge the finan cial support from the National Natural Science Foundation of China(General Program)(No.51575083)Science Fund for Creative Research Groups(No.51621064).
文摘The smoothed-particle hydrodynamics(SPH)method was introduced to simulate the quartz glass grinding process with a single grain under micrp-nano scale.To investigate the mechanism of brittle-ductile transition,such factors as the machin-ing depth,grinding force,maximum equivalent stress,and residual stress were analyzed.The simulation results indicate that quartz glass can be machined in a ductile mode under a certain condition.In this paper,the occurrence and propaga-tion of cracks in quartz glass at different grinding depths(0.1-1μm)are observed,and the critical depth of brittle-ductile transformation is 0.36 pum.At different grinding depths,the grinding force ratio is greater than 1.When the cutting depth is 0.4 um,the crack propagation depth is about 1.2μm,which provides a basis for the prediction of subsurface damage depth.In addition,the correctness of the simulation result was verified by carrying out scratch experiments of varying cutting depth on optical quartz glass.
