The prevalence of type 2 diabetes mellitus(T2DM)is increasing rapidly worldwide.Because of the limited success of generic interventions,the focus of the disease study has shifted toward personalized strategies,particu...The prevalence of type 2 diabetes mellitus(T2DM)is increasing rapidly worldwide.Because of the limited success of generic interventions,the focus of the disease study has shifted toward personalized strategies,particularly in the early stages of the disease.Traditional Chinese medicine(TCM)is based on a systems view combined with personalized strategies and has improved our knowledge of personalized diagnostics.From a systems biology perspective,the understanding of personalized diagnostics can be improved to yield a biochemical basis for such strategies;for example,metabolomics can be used in combination with other system-based diagnostic methods such as ultra-weak photon emission(UPE).In this study,we investigated the feasibility of using plasma metabolomics obtained from 44 pre-T2DM subjects to stratify the following TCM-based subtypes:Qi-Yin deficiency,Qi-Yin deficiency with dampness,and Qi-Yin deficiency with stagnation.We studied the relationship between plasma metabolomics and UPE with respect to TCM-based subtyping in order to obtain biochemical information for further interpreting disease subtypes.Principal component analysis of plasma metabolites revealed differences among the TCM-based pre-T2DM subtypes.Relatively high levels of lipids(e.g.,cholesterol esters and triglycerides)were important discriminators of two of the three subtypes and may be associated with a higher risk of cardiovascular disease.Plasma metabolomics data indicate that the lipid profile is an essential component captured by UPE with respect to stratifying subtypes of T2DM.The results suggest that metabolic differences exist among different TCM-based subtypes of pre-T2DM,and profiling plasma metabolites can be used to discriminate among these subtypes.Plasma metabolomics thus provides biochemical insights into system-based UPE measurements.展开更多
Mineral carbonation is a promising CO_(2) sequestration strategy that can utilize industrial wastes to convert CO_(2) into high-value CaCO_(3).This review summarizes the advancements in CO_(2) mineralization using typ...Mineral carbonation is a promising CO_(2) sequestration strategy that can utilize industrial wastes to convert CO_(2) into high-value CaCO_(3).This review summarizes the advancements in CO_(2) mineralization using typical industrial wastes to prepare ultrafine CaCO_(3).This work surveys the mechanisms of CO_(2) mineralization using these wastes and its capacities to synthesize CaCO_(3),evaluates the effects of carbonation pathways and operating parameters on the preparation of CaCO_(3),analyzes the current industrial application status and economics of this technology.Due to the large amount of impurities in solid wastes,the purity of CaCO_(3) prepared by indirect methods is greater than that prepared by direct methods.Crystalline CaCO_(3) includes three polymorphs.The polymorph of CaCO_(3) synthesized by carbonation process is determined the combined effects of various factors.These parameters essentially impact the nucleation and growth of CaCO_(3) by altering the CO_(2) supersaturation in the reaction system and the surface energy of CaCO_(3) grains.Increasing the initial pH of the solution and the CO_(2)flow rate favors the formation of vaterite,but calcite is formed under excessively high pH.Vaterite formation is favored at lower temperatures and residence time.With increased temperature and prolonged residence time,it passes through aragonite metastable phase and eventually transforms into calcite.Moreover,polymorph modifiers can decrease the surface energy of CaCO_(3) grains,facilitating the synthesis of vaterite.However,the large-scale application of this technology still faces many problems,including high costs,high energy consumption,low calcium leaching rate,low carbonation efficiency,and low product yield.Therefore,it is necessary to investigate ways to accelerate carbonation,optimize operating parameters,develop cost-effective agents,and understand the kinetics of CaCO_(3) nucleation and crystallization to obtain products with specific crystal forms.Furthermore,more studies on life cycle assessment(LCA)should be conducted to fully confirm the feasibility of the developed technologies.展开更多
From the perspective of development background,concepts and related policies of ultra-low emission,according to work practice,some issues and difficulties that need to be paid attention to in the environmental impact ...From the perspective of development background,concepts and related policies of ultra-low emission,according to work practice,some issues and difficulties that need to be paid attention to in the environmental impact assessment of ultra-low-emission thermal power projects were discussed from the aspects of evaluation criteria,evaluation grade and scope,pollution control technical lines,environmental benefit accounting,and total emission control,and corresponding recommendations were put forward.展开更多
Healing therapies are a set of techniques used with the aim of transfusing healthy “bioenergy” to other people in order to restore physical, mental, and emotional balance. It is necessary that something is donated f...Healing therapies are a set of techniques used with the aim of transfusing healthy “bioenergy” to other people in order to restore physical, mental, and emotional balance. It is necessary that something is donated from the healer, that is, something results from his organic metabolism. Also, based on your physical, mental, and emotional health, the energy resulting from your metabolism is assumed to be healthy for the healing of patients. On the other hand, also in many cases, healing does not occur due to the “vicious” quality of the energy to be transfused and the low receptivity of the patient. However, in most cases, it depends not only on the healer but also on the receiver, but usually on other healers, such as higher order consciousnesses. In fact, in many cases of healing, the effect is almost instantaneous with just the healer’s “magnetic energy”, especially in painful crises. Without a doubt, I believe that biophoton is an anti-inflammatory, analgesic, antibacterial and immunomodulatory bioenergy. The healing effectiveness of these therapies is well established. It is a cell-restoring product that can rebuild tissues and organs in a short time, which in many cases leads to the restoration of the patient’s health and well-being. The aim of this study is to address a brief history of ancestral energies of Asian philosophy (Chinese, Japanese and Indian), highlight the role of consciousness and the healer in healing therapies. In addition, the study emphasizes the similarity of these energies with the one called “ectoplasm”, as well as it establishes connections with the newly elected ultra-weak emission of photons. Finally, bibliographic research was carried out in an English language database and innovative concepts were introduced about the role of consciousness as well as the healer in healing therapies.展开更多
Unsupervised and supervised pattern recognition( PR)techniques are used to classify the acoustic emission( AE) data originating from the quasi-isotropic self-reinforced polyethylene composites,in order to identify the...Unsupervised and supervised pattern recognition( PR)techniques are used to classify the acoustic emission( AE) data originating from the quasi-isotropic self-reinforced polyethylene composites,in order to identify the various mechanisms in the multiangle-ply thermoplastic composites. Ultra-high molecular weight polyethylene / low density polyethylene( UHMWPE / LDPE)composites were made and tested under quasi-static tensile load. The failure process was monitored by the AE technique. The collected AE signals were classified by unsupervised and supervised PR techniques, respectively. AE signals were clustered with unsupervised PR scheme automatically and mathematically. While in the supervised PR scheme,the labeled AE data from simple lay-up UHMWPE / LDPE laminates were utilized as the reference data.Comparison was drawn according to the analytical results. Fracture surfaces of the UHMWPE / LDPE specimens were observed by a scanning electron microscope( SEM) for some physical support. By combining both classification results with the observation results,correlations were established between the AE signal classes and their originating damage modes. The comparison between the two classifying schemes showed a good agreement in the main damage modes and their failure process. It indicates both PR techniques are powerful for the complicated thermoplastic composites. Supervised PR scheme can lead to a more precise classification in that a suitable reference data set is input.展开更多
文摘The prevalence of type 2 diabetes mellitus(T2DM)is increasing rapidly worldwide.Because of the limited success of generic interventions,the focus of the disease study has shifted toward personalized strategies,particularly in the early stages of the disease.Traditional Chinese medicine(TCM)is based on a systems view combined with personalized strategies and has improved our knowledge of personalized diagnostics.From a systems biology perspective,the understanding of personalized diagnostics can be improved to yield a biochemical basis for such strategies;for example,metabolomics can be used in combination with other system-based diagnostic methods such as ultra-weak photon emission(UPE).In this study,we investigated the feasibility of using plasma metabolomics obtained from 44 pre-T2DM subjects to stratify the following TCM-based subtypes:Qi-Yin deficiency,Qi-Yin deficiency with dampness,and Qi-Yin deficiency with stagnation.We studied the relationship between plasma metabolomics and UPE with respect to TCM-based subtyping in order to obtain biochemical information for further interpreting disease subtypes.Principal component analysis of plasma metabolites revealed differences among the TCM-based pre-T2DM subtypes.Relatively high levels of lipids(e.g.,cholesterol esters and triglycerides)were important discriminators of two of the three subtypes and may be associated with a higher risk of cardiovascular disease.Plasma metabolomics data indicate that the lipid profile is an essential component captured by UPE with respect to stratifying subtypes of T2DM.The results suggest that metabolic differences exist among different TCM-based subtypes of pre-T2DM,and profiling plasma metabolites can be used to discriminate among these subtypes.Plasma metabolomics thus provides biochemical insights into system-based UPE measurements.
基金support was received the Science&Technology Foundation of RIPP(PR20230092,PR20230259)the National Natural Science Foundation of China(22278419)the Key Core Technology Research(Social Development)Foundation of Suzhou(2023ss06).
文摘Mineral carbonation is a promising CO_(2) sequestration strategy that can utilize industrial wastes to convert CO_(2) into high-value CaCO_(3).This review summarizes the advancements in CO_(2) mineralization using typical industrial wastes to prepare ultrafine CaCO_(3).This work surveys the mechanisms of CO_(2) mineralization using these wastes and its capacities to synthesize CaCO_(3),evaluates the effects of carbonation pathways and operating parameters on the preparation of CaCO_(3),analyzes the current industrial application status and economics of this technology.Due to the large amount of impurities in solid wastes,the purity of CaCO_(3) prepared by indirect methods is greater than that prepared by direct methods.Crystalline CaCO_(3) includes three polymorphs.The polymorph of CaCO_(3) synthesized by carbonation process is determined the combined effects of various factors.These parameters essentially impact the nucleation and growth of CaCO_(3) by altering the CO_(2) supersaturation in the reaction system and the surface energy of CaCO_(3) grains.Increasing the initial pH of the solution and the CO_(2)flow rate favors the formation of vaterite,but calcite is formed under excessively high pH.Vaterite formation is favored at lower temperatures and residence time.With increased temperature and prolonged residence time,it passes through aragonite metastable phase and eventually transforms into calcite.Moreover,polymorph modifiers can decrease the surface energy of CaCO_(3) grains,facilitating the synthesis of vaterite.However,the large-scale application of this technology still faces many problems,including high costs,high energy consumption,low calcium leaching rate,low carbonation efficiency,and low product yield.Therefore,it is necessary to investigate ways to accelerate carbonation,optimize operating parameters,develop cost-effective agents,and understand the kinetics of CaCO_(3) nucleation and crystallization to obtain products with specific crystal forms.Furthermore,more studies on life cycle assessment(LCA)should be conducted to fully confirm the feasibility of the developed technologies.
基金Supported by Special Project for Research on Prevention and Control of Air Pollution from Fire Coal in 2018 of Ministry of Ecology and Environment of the People’s Republic of China(2018A030)
文摘From the perspective of development background,concepts and related policies of ultra-low emission,according to work practice,some issues and difficulties that need to be paid attention to in the environmental impact assessment of ultra-low-emission thermal power projects were discussed from the aspects of evaluation criteria,evaluation grade and scope,pollution control technical lines,environmental benefit accounting,and total emission control,and corresponding recommendations were put forward.
文摘Healing therapies are a set of techniques used with the aim of transfusing healthy “bioenergy” to other people in order to restore physical, mental, and emotional balance. It is necessary that something is donated from the healer, that is, something results from his organic metabolism. Also, based on your physical, mental, and emotional health, the energy resulting from your metabolism is assumed to be healthy for the healing of patients. On the other hand, also in many cases, healing does not occur due to the “vicious” quality of the energy to be transfused and the low receptivity of the patient. However, in most cases, it depends not only on the healer but also on the receiver, but usually on other healers, such as higher order consciousnesses. In fact, in many cases of healing, the effect is almost instantaneous with just the healer’s “magnetic energy”, especially in painful crises. Without a doubt, I believe that biophoton is an anti-inflammatory, analgesic, antibacterial and immunomodulatory bioenergy. The healing effectiveness of these therapies is well established. It is a cell-restoring product that can rebuild tissues and organs in a short time, which in many cases leads to the restoration of the patient’s health and well-being. The aim of this study is to address a brief history of ancestral energies of Asian philosophy (Chinese, Japanese and Indian), highlight the role of consciousness and the healer in healing therapies. In addition, the study emphasizes the similarity of these energies with the one called “ectoplasm”, as well as it establishes connections with the newly elected ultra-weak emission of photons. Finally, bibliographic research was carried out in an English language database and innovative concepts were introduced about the role of consciousness as well as the healer in healing therapies.
基金Scientific Research Foundation of Guangdong Polytechnic,China(No.K2010201)
文摘Unsupervised and supervised pattern recognition( PR)techniques are used to classify the acoustic emission( AE) data originating from the quasi-isotropic self-reinforced polyethylene composites,in order to identify the various mechanisms in the multiangle-ply thermoplastic composites. Ultra-high molecular weight polyethylene / low density polyethylene( UHMWPE / LDPE)composites were made and tested under quasi-static tensile load. The failure process was monitored by the AE technique. The collected AE signals were classified by unsupervised and supervised PR techniques, respectively. AE signals were clustered with unsupervised PR scheme automatically and mathematically. While in the supervised PR scheme,the labeled AE data from simple lay-up UHMWPE / LDPE laminates were utilized as the reference data.Comparison was drawn according to the analytical results. Fracture surfaces of the UHMWPE / LDPE specimens were observed by a scanning electron microscope( SEM) for some physical support. By combining both classification results with the observation results,correlations were established between the AE signal classes and their originating damage modes. The comparison between the two classifying schemes showed a good agreement in the main damage modes and their failure process. It indicates both PR techniques are powerful for the complicated thermoplastic composites. Supervised PR scheme can lead to a more precise classification in that a suitable reference data set is input.