Geochemical characteristics and exploration significance of ultra-deep Sinian oil and gas from Well Tashen 5,Tarim Basin,NW China

The Well Tashen 5(TS5),drilled and completed at a vertical depth of 9017 m in the Tabei Uplift of the Tarim Basin,NW China,is the deepest well in Asia.It has been producing both oil and gas from the Sinian at a depth of 8780e8840 m,also the deepest in Asia in terms of oil discovery.In this paper,the geochemical characteristics of Sinian oil and gas from the well were investigated and compared with those of Cambrian oil and gas discovered in the same basin.The oil samples,with Pr/Ph ratio of 0.78 and a whole oil carbon isotopic value of31.6‰,have geochemical characteristics similar to those of Ordovician oils from the No.1 fault in the North Shuntuoguole area(also named Shunbei area)and the Middle Cambrian oil from wells Zhongshen 1(ZS1)and Zhongshen 5(ZS5)of Tazhong Uplift.The maturity of light hydrocarbons,diamondoids and aromatic fractions all suggest an approximate maturity of 1.5%e1.7%Ro for the samples.The(4-+3-)methyldiamantane concentration of the samples is 113.5 mg/g,indicating intense cracking with a cracking degree of about 80%,which is consistent with the high bottom hole temperature(179℃).The Sinian gas samples are dry with a dryness coefficient of 0.97.The gas is a mixture of kerogen-cracking gas and oil-cracking gas and has Ro values ranging between 1.5%and 1.7%,and methane carbon isotopic values of41.6‰.Based on the equivalent vitrinite reflectance(R_(eqv)=1.51%e1.61%)and the thermal evolution of source rocks from the Cambrian Yu'ertusi Formation of the same well,it is proposed that the Sinian oil and gas be mainly sourced from the Cambrian Yu'ertusi Formation during the Himalayan period but probably also be joined by hydrocarbon of higher maturity that migrated from other source rocks in deeper formations.The discovery of Sinian oil and gas from Well TS5 suggests that the ancient ultra-deep strata in the northern Tarim Basin have the potential for finding volatile oil or condensate reservoirs.

Multistring analysis of wellhead movement and uncemented casing strength in offshore oil and gas wells

This paper presents a theoretical method and a finite element method to describe wellhead movement and uncemented casing strength in offshore oil and gas wells.Parameters considered in the theoretical method include operating load during drilling and completion and the temperature field,pressure field and the end effect of pressure during gas production.The finite element method for multistring analysis is developed to simulate random contact between casings.The relevant finite element analysis scheme is also presented according to the actual procedures of drilling,completion and gas production.Finally,field cases are presented and analyzed using the proposed methods.These are four offshore wells in the South China Sea.The calculated wellhead growths during gas production are compared with measured values.The results show that the wellhead subsides during drilling and completion and grows up during gas production.The theoretical and finite element solutions for wellhead growth are in good agreement with measured values and the deviations of calculation are within 10％.The maximum von Mises stress on the uncemented intermediate casing occurs during the running of the oil tube.The maximum von Mises stress on the uncemented production casing,calculated with the theoretical method occurs at removing the blow-out-preventer （BOP） while that calculated with the finite element method occurs at gas production.Finite element solutions for von Mises stress are recommended and the uncemented casings of four wells satisfy strength requirements.

Fracture Effectiveness and its Influence on Gas Productivity in Ultra-deep Tight Sandstone Reservoirs of the Keshen Gas Field,Tarim Basin

Fracture effectiveness plays a key role in gas productivity of ultra-deep tight sandstone reservoirs,Kuqa depression,Tarim Basin.Based on cores,thin sections,well logging,well testing and production data,the study evaluated fracture effectiveness and illustrated its impacts on gas productivity.High-angle and vertical shear fractures are the most important types.Distribution of effective fractures shows great heterogeneous.Fracture effectiveness is influenced by tectonism,diagenesis and in-situ stress.Earlier fractures or fractures in close to gypsum rock are easier to be filled.Completely filled fractures can be reopened under late tectonism.Dissolution improves local fracture effectiveness.Minerals spanning fracture surfaces protect fracture effectiveness from late compression.Fractures filled with calcite can be activated by acidification.Effective fractures parallel to maximum horizontal principal compressive stress direction show larger aperture.Overpressure can decrease the effective normal stress to maintain fracture effectiveness.With exploitation,decline in pore pressure reduces fracture effectiveness.Linear density,aperture,and strike of effective fractures influence gas productivity.Effective fractures greatly enhance matrix permeability.Therefore,more abundant and larger aperture fractures are always corresponded to higher productivity.However,effective fractures also facilitate late water invasion,especially,both mutually parallel.Intense water invasion leads to rapidly declines in productivity.

Research advances on the mechanisms of reservoir formation and hydrocarbon accumulation and the oil and gas development methods of deep and ultra-deep marine carbonates

Based on the new data of drilling, seismic, logging, test and experiments, the key scientific problems in reservoir formation, hydrocarbon accumulation and efficient oil and gas development methods of deep and ultra-deep marine carbonate strata in the central and western superimposed basin in China have been continuously studied.(1) The fault-controlled carbonate reservoir and the ancient dolomite reservoir are two important types of reservoirs in the deep and ultra-deep marine carbonates. According to the formation origin, the large-scale fault-controlled reservoir can be further divided into three types:fracture-cavity reservoir formed by tectonic rupture, fault and fluid-controlled reservoir, and shoal and mound reservoir modified by fault and fluid. The Sinian microbial dolomites are developed in the aragonite-dolomite sea. The predominant mound-shoal facies, early dolomitization and dissolution, acidic fluid environment, anhydrite capping and overpressure are the key factors for the formation and preservation of high-quality dolomite reservoirs.(2) The organic-rich shale of the marine carbonate strata in the superimposed basins of central and western China are mainly developed in the sedimentary environments of deep-water shelf of passive continental margin and carbonate ramp. The tectonic-thermal system is the important factor controlling the hydrocarbon phase in deep and ultra-deep reservoirs, and the reformed dynamic field controls oil and gas accumulation and distribution in deep and ultra-deep marine carbonates.(3) During the development of high-sulfur gas fields such as Puguang, sulfur precipitation blocks the wellbore. The application of sulfur solvent combined with coiled tubing has a significant effect on removing sulfur blockage. The integrated technology of dual-medium modeling and numerical simulation based on sedimentary simulation can accurately characterize the spatial distribution and changes of the water invasion front.Afterward, water control strategies for the entire life cycle of gas wells are proposed, including flow rate management, water drainage and plugging.(4) In the development of ultra-deep fault-controlled fractured-cavity reservoirs, well production declines rapidly due to the permeability reduction, which is a consequence of reservoir stress-sensitivity. The rapid phase change in condensate gas reservoir and pressure decline significantly affect the recovery of condensate oil. Innovative development methods such as gravity drive through water and natural gas injection, and natural gas drive through top injection and bottom production for ultra-deep fault-controlled condensate gas reservoirs are proposed. By adopting the hierarchical geological modeling and the fluid-solid-thermal coupled numerical simulation, the accuracy of producing performance prediction in oil and gas reservoirs has been effectively improved.

Study on a Gas Plunger Lift Model for Shale Gas Wells and Its Effective Application

The problem of efficient gas lift for gas well annulus packers that rely on their own energy plungers is considered.The complex related gas-liquid problem is addressed in the frame of model where the gas inflow dynamics and liquid inflow dynamics of the considered shale gas wells are weakly coupled.On this basis,and with the aiding support of indoor simulation experimental data,a new gas plunger lift design taking into account liquid leakage is obtained.Finally,a dedicated software relying on this approach is developed and used to verify the reliability of the model by means of field examples.

Selection of candidate wells for re-fracturing in tight gas sand reservoirs using fuzzy inference

An artificial-intelligence based decision-making protocol is developed for tight gas sands to identify re-fracturing wells and used in case studies. The methodology is based on fuzzy logic to deal with imprecision and subjectivity through mathematical representations of linguistic vagueness, and is a computing system based on the concepts of fuzzy set theory, fuzzy if-then rules, and fuzzy reasoning. Five indexes are used to characterize hydraulic fracture quality, reservoir characteristics, operational parameters, initial conditions, and production related to the selection of re-fracturing well, and each index includes 3 related parameters. The value of each index/parameter is grouped into three categories that are low, medium, and high. For each category, a trapezoidal membership function all related rules are defined. The related parameters of an index are input into the rule-based fuzzy-inference system to output value of the index. Another fuzzy-inference system is built with the reservoir index, operational index, initial condition index and production index as input parameters and re-fracturing potential index as output parameter to screen out re-fracturing wells. This approach was successfully validated using published data.

Failure characteristics of surface vertical wells for relieved coal gas and their influencing factors in Huainan mining area

Based on data from through-hole and logging,we studied the failure characteristics of surface drainage wells for relieved coal gas in Huainan mining area and its influencing factors.The results show that the damaged positions of drainage wells are mainly located at the thick clay layer in the low alluvium and the lithological interface in the upper section of bedrock in west mining area.The failure depth of casing is 244-670 m and concentrates at about 270-460 m deep.These damaged positions are mainly located in the bending zone according to three zones of rock layers in the vertical section above the roof divided. Generally,the casing begins to deform or damage before the face line about 30-150 m.Special formation structure and rock mass properties are the direct causes of the casing failure,high mining height and fast advancing speed are fundamental reasons for rock mass damage.However,the borehole configuration and spacing to the casing failure are not very clear.

Flowback and early-time production modeling of unconventional gas wells using an improved semi-analytical method

Multiple fractured horizontal wells (MFHWs) currently are the only possible means of commercial production from the low and ultra-low permeability unconventional gas reservoirs. In early production time, flowback fluid, which constitutes of hydraulic water and gas flow within fractures, is collected and analyzed. Flowback analysis has been shown to be a useful tool to estimate key properties of the hydraulic fracture such as conductivity and pore volume. Until date, most tools of flowback analysis rely on empirical and approximate methods. This study presents an improved Green-function-based semi-analytical solution for performance analysis of horizontal gas wells during flowback and early production periods. The proposed solution is derived based on coupling the solutions of two domains: a rigorously derived Green’s function-based integral solution for single-phase gas flow in matrix, and a finite-difference, multiphase solution for gas–water two-phase flow in the fracture. The validity of proposed semi-analytical solution is verified by finely gridded numerical models built in a commercial simulator for a series of synthetic cases considering a variety of fluid and reservoir property combinations, as well as various different production constraints. Comparisons against available empirical and approximate methods are also provided for these cases.

Establishment of tensile failure induced sanding onset prediction model for cased-perforated gas wells

Sand production is a challenging issue in upstream oil and gas industry,causing operational and safety problems.Therefore,before drilling the wells,it is essential to predict and evaluate sanding onset of the wells.In this paper,new poroelastoplastic stress solutions around the perforation tunnel and tip based on the Mohr-Coulomb criterion are presented firstly.Based on the stress models,a tensile failure induced sanding onset prediction model for cased-perforated gas wells is derived.Then the analytical model is applied to field data to verify its applicability.The results from the perforation tip tensile failure induced sanding model are very close to field data.Therefore,this model is recommended for forecasting the critical conditions of sand production analysis.Such predictions are necessary for providing technical support for sand control decision-making and predicting the production condition at which sanding onset occurs.

Wellbore Stability Problems in Deepwater Gas Wells

The analysis of wellbore stability in deepwater gas wells is vital for effective drilling operations, especially in deepwater remote areas and for modern drilling technologies. Wellbore stability problems usually occur when drilling through hydrocarbon formations such as shale, unconsolidated sandstone, fractured carbonate formations and HPHT formations with narrow safety mud window. These problems can significantly affect drilling time, costs and the whole drilling operations. In deepwater gas wells, there is also the possible of gas hydrate problems because of the low temperature and high pressure conditions of the environment as well as the coexistence of gas and water inside the wellbore. These hydrates can block the mud line, surface choke line and even the BOP stack if no hydrate preventive measures are considered. In addition, the dissociation of these hydrates in the wellbore may gasify the drilling fluid and reduce drilling mud density, hydrostatic pressure, change mud rheology and cause wellbore instabilities. Traditional wellbore stability analysis considered the formation to be isotropic and assumed that the rock mechanical properties are independent of in-situ stress direction. This assumption is invalid for formations with layers or natural fractures because the presence of these geological features will influence rock anisotropic properties, wellbore stress concentration and failure behavior. This is a complicated phenomenon because the stress distribution around a wellbore is affected by factors such as rock properties, far-field principal stresses, wellbore trajectory, formation pore pressure, reservoir and drilling fluids properties and time. This research work reviews the major causes of wellbore stability problems in deepwater gas wells and outlines different preventive measures for effective drilling operation, because real-time monitoring of drilling process can provide necessary information for solving any wellbore stability problems in a short time.

Reliability Analysis of Super 13Cr Tubing in Ultra-Deep Gas Well

Abnormal oil casing pressure appeared in the process of test production of multiple Ultra-Deep Gas Wells in Tarim Basin. The super 13Cr oil pipe string was used to analyze the causes of pipe string failure in view of the oil casing channeling well during the test and blowout period. The construction process of the well was analyzed in detail. Combined with the review of the operation flow and the detection of fracture string material and fracture morphology, the causes of pipe string fracture were analyzed and calculated in detail. Through field investigation, analysis and calculation, it was found that the main cause of cracking of super 13Cr tubing in this well is the decrease of vibration natural frequency caused by excessive fluid velocity in pipe and too long span of pipe string. At the same time, the mixed failure of stress corrosion cracking and stress load interaction occurred in Cl−1 environment and other corrosion environments.

Experimental Study on the Attenuation Law of Vibration Wave Propagation in Natural Gas Wells in Coal-Gas Cross-Mining Area

Aiming at the safety distance between coal mining working face and natural gas wells in the cross-mining area of multiple mineral resources, the cross- mining area of gas and coal resources in the Ordos Basin is taken as the engineering background. An anti-collision early warning technology method based on vibration wave propagation attenuation monitoring is proposed to prevent collision accidents between road headers and natural gas wells. Through the steel pipe and steel pipe concrete knocking vibration test and underground digging vibration test, the research results show that: The exponential decay coefficients of the vibration wave in steel pipe, steel pipe concrete and coal rock respectively are 0.1, 0.1140 and 0.03, which are all in accordance with the exponential decay law, and the vibration wave firstly decays sharply and then decays slowly;the formula for the distance from the road header to the natural gas well was derived based on the vibration attenuation formula, to provide a new method for realizing the problem of precise and coordinated extraction by surface monitoring of the distance from down hole road headers to gas wells, collision prevention prediction and warning and prevention of collision of extraction equipment with gas wells.

Theoretical Progress and Key Technologies of Onshore Ultra-Deep Oil/Gas Exploration

Oil/gas exploration around the world has extended into deep and ultra-deep strata because it is increasingly difficult to find new large-scale oil/gas reservoirs in shallow–middle buried strata. In recent years, China has made remarkable achievements in oil/gas exploration in ultra-deep areas including carbonate and clastic reservoirs. Some (ultra) large-scale oil and gas fields have been discovered. The oil/gas accumulation mechanisms and key technologies of oil/gas reservoir exploration and development are summarized in this study in order to share China’s experiences. Ultra-deep oil/gas originates from numerous sources of hydrocarbons and multiphase charging. Liquid hydrocarbons can form in ultradeep layers due to low geothermal gradients or overpressures, and the natural gas composition in ultra-deep areas is complicated by the reactions between deep hydrocarbons, water, and rock or by the addition of mantle- or crust-sourced gases. These oils/gases are mainly stored in the original highenergy reef/shoal complexes or in sand body sediments. They usually have high original porosity. Secondary pores are often developed by dissolution, dolomitization, and fracturing in the late stage. The early pores have been preserved by retentive diageneses such as the early charging of hydrocarbons. Oil/gas accumulation in ultra-deep areas generally has the characteristics of near-source accumulation and sustained preservation. The effective exploration and development of ultra-deep oil/gas reservoirs depend on the support of key technologies. Use of the latest technologies such as seismic signal acquisition and processing, low porosity and permeability zone prediction, and gas–water identification has enabled the discovery of ultra-deep oil/gas resources. In addition, advanced technologies for drilling, completion, and oil/gas testing have ensured the effective development of these fields.

Practice and theoretical and technical progress in exploration and development of Shunbei ultra-deep carbonate oil and gas field,Tarim Basin,NW China

In this review on the exploration and development process of the Shunbei ultra-deep carbonate oil and gas field in the Tarim Basin, the progress of exploration and development technologies during the National 13th Five-Year Plan of China has been summarized systematically, giving important guidance for the exploration and development of ultra-deep marine carbonate reservoirs in China and abroad. Through analyzing the primary geological factors of “hydrocarbon generation-reservoir formation-hydrocarbon accumulation” of ancient and superposed basin comprehensively and dynamically, we point out that because the Lower Cambrian Yuertusi Formation high-quality source rocks have been located in a low-temperature environment for a long time, they were capable of generating hydrocarbon continuously in late stage, providing ideal geological conditions for massive liquid hydrocarbon accumulation in ultra-deep layers. In addition, strike-slip faults developed in tectonically stable areas have strong control on reservoir formation and hydrocarbon accumulation in this region. With these understandings, the exploration focus shifted from the two paleo-uplifts located in the north and the south to the Shuntuoguole lower uplift located in between and achieved major hydrocarbon discoveries. Through continuing improvement of seismic exploration technologies for ultra-deep carbonates in desert, integrated technologies including seismic acquisition in ultra-deep carbonates,seismic imaging of strike-slip faults and the associated cavity-fracture systems, detailed structural interpretation of strike-slip faults, characterization and quantitative description of fault-controlled cavities and fractures, description of fault-controlled traps and target optimization have been established. Geology-engineering integration including well trajectory optimization,high efficiency drilling, completion and reservoir reformation technologies has provided important support for exploration and development of the Shunbei oil and gas field.

Progress and development directions of stimulation techniques for ultra-deep oil and gas reservoirs

By reviewing the development history of stimulation techniques for deep/ultra-deep oil and gas reservoirs,the new progress in this field in China and abroad has been summed up,including deeper understanding on formation mechanisms of fracture network in deep/ultra-deep oil and gas reservoir,performance improvement of fracturing fluid materials,fine stratification of ultra-deep vertical wells,and mature staged multi-cluster fracturing technique for ultra-deep and highly deviated wells/horizontal wells.In light of the exploration and development trend of ultra-deep oil and gas reservoirs in China,the requirements and technical difficulties in ultra-deep oil and gas reservoir stimulation are discussed:(1)The research and application of integrated geological engineering technology is difficult.(2)The requirements on fracturing materials for stimulation are high.(3)It is difficult to further improve the production in vertical profile of the ultra-deep and hugely thick reservoirs.(4)The requirements on tools and supporting high-pressure equipment on the ground for stimulation are high.(5)It is difficult to achieve efficient stimulation of ultra-deep,high-temperature and high-pressure wells.(6)It is difficult to monitor directly the reservoir stimulation and evaluate the stimulation effect accurately after stimulation.In line with the complex geological characteristics of ultra-deep oil and gas reservoirs in China,seven technical development directions are proposed:(1)To establish systematic new techniques for basic research and evaluation experiments;(2)to strengthen geological research and improve the operational mechanism of integrating geological research and engineering operation;(3)to develop high-efficiency fracturing materials for ultra-deep reservoirs;(4)to research separated layer fracturing technology for ultra-deep and hugely thick reservoirs;(5)to explore fracture-control stimulation technology for ultra-deep horizontal well;(6)to develop direct monitoring technology for hydraulic fractures in ultra-deep oil and gas reservoirs;(7)to develop downhole fracturing tools with high temperature and high pressure tolerance and supporting wellhead equipment able to withstand high pressure.

Geochemical characteristics of ultra-deep natural gas in the Sichuan Basin, SW China

The natural gas components and geochemistry of 38 ultra-deep gas wells(burial depth greater than 6 000 m) in the Sichuan Basin were analyzed to determine the genesis of ultra-deep natural gas in the basin. The ultra-deep natural gas components of the basin have the following characteristics: Methane has an absolute advantage, which can be up to 99.56% with an average of 86.6%; ethane is low, with an average of 0.13%; there is nearly no propane and butane. So it is dry gas at over-mature thermal stage. The content of H2 S can be up to 25.21%, with an average of 5.45%. The alkane gas isotopes are: the carbon isotope varies from-32.3‰ to-26.7‰ for methane and from-32.9‰ to-22.1‰ for ethane. There is nearly no carbon isotopic reversal among methane and its homologues. Hydrogen isotope varies from-156‰ to-114‰ for methane, and from-103‰ to-89‰ for some ethane. The carbon isotope of CO_2 varies from-17.2‰ to 1.9‰ and most of them fall within the range of 0±3‰. According to the δ^(13)C_1-δ^(13)C_2-δ^(13)C_3 plot, except some wells, all other ultra-deep gas wells are dominated by coal-derived gas. Based on the CO_2 origin distinguishing plot and δ^(13)C_(CO_2), except some individual wells, most of the ultra-deep CO_2 are of carbonate metamorphic origin. H2 S in the ultra-deep layer of Longgang and Yuanba gas fields belongs to thermochemical sulfate reduction(TSR), while H2 S from Well Shuangtan belongs to thermal decomposition of sulfides(TDS).

Effect of longwall-induced subsurface deformations on shale gas well casing stability under deep covers

This paper presents the results of a 2017 study conducted by the National Institute for Occupational Safety and Health(NIOSH), Pittsburgh Mining Research Division(PMRD), to evaluate the effects of longwall-induced subsurface deformations within a longwall abutment pillar under deep cover. The 2017 study was conducted in a southwestern Pennsylvania coal mine, which extracts 457 m-wide longwall panels under 361 m of cover. One 198 m-deep, in-place inclinometer monitoring well was drilled and installed over a 45 m by 84 m center abutment pillar. In addition to the monitoring well, surface subsidence measurements and underground coal pillar pressure measurements were conducted as the 457 m-wide longwall panel on the south side of the abutment pillar was being mined. Prior to the first longwall excavation, a number of simulations using FLAC3D^(TM) were conducted to estimate surface subsidence, increases in underground coal pillar pressure, and subsurface horizontal displacements in the monitoring well. Comparisons of the pre-mining FLAC3D simulation results and the surface, subsurface,and underground instrumentation results show that the measured in-place inclinometer casing deformations are in reasonable agreement with those predicted by the 3D finite difference models. The measured surface subsidence and pillar pressure are in excellent agreement with those predicted by the 3D models.Results from this 2017 research clearly indicate that, under deep cover, the measured horizontal displacements within the abutment pillar are approximately one order of magnitude smaller than those measured in a 2014 study under medium cover.

Development and Application of a Production Data Analysis Model for a Shale Gas Production Well

This paper presents the development and application of a production data analysis software that can analyze and forecast the production performance and reservoir properties of shale gas wells.The theories used in the study were based on the analytical and empirical approaches.Its reliability has been confirmed through comparisons with a commercial software.Using transient data relating to multi-stage hydraulic fractured horizontal wells,it was confirmed that the accuracy of the modified hyperbolic method showed an error of approximately 4%compared to the actual estimated ultimate recovery(EUR).On the basis of the developed model,reliable productivity forecasts have been obtained by analyzing field production data relating to wells in Canada.The EUR was computed as 9.6 Bcf using the modified hyperbolic method.Employing the Pow Law Exponential method,the EUR would be 9.4 Bcf.The models developed in this study will allow in the future integration of new analytical and empirical theories in a relatively readily than commercial models.

Geological factors associated with unsuccessful exploration wells in the northern margin of the Qaidam basin

We investigated the geological factors associated with unsuccessful exploration wells in the northern margin of the Qaidam basin to better understand their cause.The structural situation,the hydrocarbon accumulation mechanism and unsuccessful well data collected from 1996 to 2005 were studied.The results show that the main geological factors associated with unsuccessful exploration wells are a lack of effective source rocks and a lack of effective traps,as well as the migration-accumulation conditions that exist in this area.The basin was reformed by Meso-Cenozoic tectonic evolution.Multi-stage tectonic activities have both positive and negative effects on hydrocarbon accumulation.Source rocks distribution,effective migration channels,effective traps and the tectonic evolution effects on hydrocarbons should be the key objects for further studies.

Efficient development strategies for large ultra-deep structural gas fields in China

Through analyzing the development of large ultra-deep structural gas fields in China,strategies for the efficient development of such gas fields are proposed based on their geological characteristics and production performance.According to matrix properties,fracture development degree and configuration between matrix and fractures,the reservoirs are classified into three types:single porosity single permeability system,dual porosity dual permeability system,and dual porosity single permeability system.These three types of gas reservoirs show remarkable differences in different scales of permeability,the ratio of dynamic reserves to volumetric reserves and water invasion risk.It is pointed out that the key factors affecting development efficiency of these gas fields are determination of production scale and rapid identification of water invasion.Figuring out the characteristics of the gas fields and working out pertinent technical policies are the keys to achieve efficient development.The specific strategies include reinforcing early production appraisal before full scale production by deploying high precision development seismic survey,deploying development appraisal wells in batches and scale production test to get a clear understanding on the structure,reservoir type,distribution pattern of gas and water,and recoverable reserves,controlling production construction pace to ensure enough evaluation time and accurate evaluation results in the early stage,in line with the development program made according to the recoverable reserves,working out proper development strategies,optimizing pattern and proration of wells based on water invasion risk and gas supply capacity of matrix,and reinforcing research and development of key technologies.