Effects of spatial heterogeneity on pseudo-static stability of coal mine overburden dump slope,using random limit equilibrium and random finite element methods:A comparative study

Sudden and unforeseen seismic failures of coal mine overburden(OB)dump slopes interrupt mining operations,cause loss of lives and delay the production of coal.Consideration of the spatial heterogeneity of OB dump materials is imperative for an adequate evaluation of the seismic stability of OB dump slopes.In this study,pseudo-static seismic stability analyses are carried out for an OB dump slope by considering the material parameters obtained from an insitu field investigation.Spatial heterogeneity is simulated through use of the random finite element method(RFEM)and the random limit equilibrium method(RLEM)and a comparative study is presented.Combinations of horizontal and vertical spatial correlation lengths were considered for simulating isotropic and anisotropic random fields within the OB dump slope.Seismic performances of the slope have been reported through the probability of failure and reliability index.It was observed that the RLEM approach overestimates failure probability(P_(f))by considering seismic stability with spatial heterogeneity.The P_(f)was observed to increase with an increase in the coefficient of variation of friction angle of the dump materials.Further,it was inferred that the RLEM approach may not be adequately applicable for assessing the seismic stability of an OB dump slope for a horizontal seismic coefficient that is more than or equal to 0.1.

Geochemical characteristics and exploration significance of ultra-deep Sinian oil and gas from Well Tashen 5,Tarim Basin,NW China

The Well Tashen 5(TS5),drilled and completed at a vertical depth of 9017 m in the Tabei Uplift of the Tarim Basin,NW China,is the deepest well in Asia.It has been producing both oil and gas from the Sinian at a depth of 8780e8840 m,also the deepest in Asia in terms of oil discovery.In this paper,the geochemical characteristics of Sinian oil and gas from the well were investigated and compared with those of Cambrian oil and gas discovered in the same basin.The oil samples,with Pr/Ph ratio of 0.78 and a whole oil carbon isotopic value of31.6‰,have geochemical characteristics similar to those of Ordovician oils from the No.1 fault in the North Shuntuoguole area(also named Shunbei area)and the Middle Cambrian oil from wells Zhongshen 1(ZS1)and Zhongshen 5(ZS5)of Tazhong Uplift.The maturity of light hydrocarbons,diamondoids and aromatic fractions all suggest an approximate maturity of 1.5%e1.7%Ro for the samples.The(4-+3-)methyldiamantane concentration of the samples is 113.5 mg/g,indicating intense cracking with a cracking degree of about 80%,which is consistent with the high bottom hole temperature(179℃).The Sinian gas samples are dry with a dryness coefficient of 0.97.The gas is a mixture of kerogen-cracking gas and oil-cracking gas and has Ro values ranging between 1.5%and 1.7%,and methane carbon isotopic values of41.6‰.Based on the equivalent vitrinite reflectance(R_(eqv)=1.51%e1.61%)and the thermal evolution of source rocks from the Cambrian Yu'ertusi Formation of the same well,it is proposed that the Sinian oil and gas be mainly sourced from the Cambrian Yu'ertusi Formation during the Himalayan period but probably also be joined by hydrocarbon of higher maturity that migrated from other source rocks in deeper formations.The discovery of Sinian oil and gas from Well TS5 suggests that the ancient ultra-deep strata in the northern Tarim Basin have the potential for finding volatile oil or condensate reservoirs.

A review of reservoir damage during hydraulic fracturing of deep and ultra-deep reservoirs

Deep and ultra-deep reservoirs have gradually become the primary focus of hydrocarbon exploration as a result of a series of significant discoveries in deep hydrocarbon exploration worldwide.These reservoirs present unique challenges due to their deep burial depth(4500-8882 m),low matrix permeability,complex crustal stress conditions,high temperature and pressure(HTHP,150-200℃,105-155 MPa),coupled with high salinity of formation water.Consequently,the costs associated with their exploitation and development are exceptionally high.In deep and ultra-deep reservoirs,hydraulic fracturing is commonly used to achieve high and stable production.During hydraulic fracturing,a substantial volume of fluid is injected into the reservoir.However,statistical analysis reveals that the flowback rate is typically less than 30%,leaving the majority of the fluid trapped within the reservoir.Therefore,hydraulic fracturing in deep reservoirs not only enhances the reservoir permeability by creating artificial fractures but also damages reservoirs due to the fracturing fluids involved.The challenging“three-high”environment of a deep reservoir,characterized by high temperature,high pressure,and high salinity,exacerbates conventional forms of damage,including water sensitivity,retention of fracturing fluids,rock creep,and proppant breakage.In addition,specific damage mechanisms come into play,such as fracturing fluid decomposition at elevated temperatures and proppant diagenetic reactions at HTHP conditions.Presently,the foremost concern in deep oil and gas development lies in effectively assessing the damage inflicted on these reservoirs by hydraulic fracturing,comprehending the underlying mechanisms,and selecting appropriate solutions.It's noteworthy that the majority of existing studies on reservoir damage primarily focus on conventional reservoirs,with limited attention given to deep reservoirs and a lack of systematic summaries.In light of this,our approach entails initially summarizing the current knowledge pertaining to the types of fracturing fluids employed in deep and ultra-deep reservoirs.Subsequently,we delve into a systematic examination of the damage processes and mechanisms caused by fracturing fluids within the context of hydraulic fracturing in deep reservoirs,taking into account the unique reservoir characteristics of high temperature,high pressure,and high in-situ stress.In addition,we provide an overview of research progress related to high-temperature deep reservoir fracturing fluid and the damage of aqueous fracturing fluids to rock matrix,both artificial and natural fractures,and sand-packed fractures.We conclude by offering a summary of current research advancements and future directions,which hold significant potential for facilitating the efficient development of deep oil and gas reservoirs while effectively mitigating reservoir damage.

Multi-lump Kinetic Parameter Estimation and Simulation of Trickle-bed Reactor for Ultra-deep Hydrodesulfurization of Diesel

A three-lumping Langmuir-Hinshelwood kinetic model was established based on the structures and reactivities of sulfur compounds.This model described the ultra-deep hydrodesulfurization(UDHDS)performance of diesel,reducing sulfur content from 10000μg/g to less than 10μg/g,with experimental and predicted data showing a discrepancy of less than 10%.The diesel UDHDS reaction was simulated by combining the mass transfer,reaction kinetics model,and physical properties of diesel.The results showed how the concentrations of H2S,hydrogen,and sulfur in the gas,liquid,and solid phases varied along the reactor length.Moreover,the study discussed the effects of each process parameter and impurity concentrations(H2S,basic nitrogen and,non-basic nitrogen)on diesel UDHDS.

Supramolecular polymer-based gel fracturing fluid with a double network applied in ultra-deep hydraulic fracturing

A gel based on polyacrylamide,exhibiting delayed crosslinking characteristics,emerges as the preferred solution for mitigating degradation under conditions of high temperature and extended shear in ultralong wellbores.High viscosity/viscoelasticity of the fracturing fluid was required to maintain excellent proppant suspension properties before gelling.Taking into account both the cost and the potential damage to reservoirs,polymers with lower concentrations and molecular weights are generally preferred.In this work,the supramolecular action was integrated into the polymer,resulting in significant increases in the viscosity and viscoelasticity of the synthesized supramolecular polymer system.The double network gel,which is formed by the combination of the supramolecular polymer system and a small quantity of Zr-crosslinker,effectively resists temperature while minimizing permeability damage to the reservoir.The results indicate that the supramolecular polymer system with a molecular weight of(268—380)×10^(4)g/mol can achieve the same viscosity and viscoelasticity at 0.4 wt%due to the supramolecular interaction between polymers,compared to the 0.6 wt%traditional polymer(hydrolyzed polyacrylamide,molecular weight of 1078×10^(4)g/mol).The supramolecular polymer system possessed excellent proppant suspension properties with a 0.55 cm/min sedimentation rate at 0.4 wt%,whereas the0.6 wt%traditional polymer had a rate of 0.57 cm/min.In comparison to the traditional gel with a Zrcrosslinker concentration of 0.6 wt%and an elastic modulus of 7.77 Pa,the double network gel with a higher elastic modulus(9.00 Pa)could be formed only at 0.1 wt%Zr-crosslinker,which greatly reduced the amount of residue of the fluid after gel-breaking.The viscosity of the double network gel was66 m Pa s after 2 h shearing,whereas the traditional gel only reached 27 m Pa s.

Fracture Effectiveness and its Influence on Gas Productivity in Ultra-deep Tight Sandstone Reservoirs of the Keshen Gas Field,Tarim Basin

Fracture effectiveness plays a key role in gas productivity of ultra-deep tight sandstone reservoirs,Kuqa depression,Tarim Basin.Based on cores,thin sections,well logging,well testing and production data,the study evaluated fracture effectiveness and illustrated its impacts on gas productivity.High-angle and vertical shear fractures are the most important types.Distribution of effective fractures shows great heterogeneous.Fracture effectiveness is influenced by tectonism,diagenesis and in-situ stress.Earlier fractures or fractures in close to gypsum rock are easier to be filled.Completely filled fractures can be reopened under late tectonism.Dissolution improves local fracture effectiveness.Minerals spanning fracture surfaces protect fracture effectiveness from late compression.Fractures filled with calcite can be activated by acidification.Effective fractures parallel to maximum horizontal principal compressive stress direction show larger aperture.Overpressure can decrease the effective normal stress to maintain fracture effectiveness.With exploitation,decline in pore pressure reduces fracture effectiveness.Linear density,aperture,and strike of effective fractures influence gas productivity.Effective fractures greatly enhance matrix permeability.Therefore,more abundant and larger aperture fractures are always corresponded to higher productivity.However,effective fractures also facilitate late water invasion,especially,both mutually parallel.Intense water invasion leads to rapidly declines in productivity.

Exploration breakthrough and factors for enrichment and high-yield of hydrocarbons in ultra-deep clastic rocks in Linhe Depression,Hetao Basin,NW China

Based on drilling and logging data,as well as geological experiments,the geological characteristics and factors controlling high-yield and enrichment of hydrocarbons in ultra-deep clastic rocks in the Linhe Depression,Hetao Basin,are studied.The results are obtained in four aspects.First,the inland saline lacustrine high-quality source rocks developed in the Paleogene in the Linhe Depression have the characteristics of early maturity,early expulsion,high hydrocarbon yield,and continuous and efficient hydrocarbon generation,providing an important resource basis for the formation of ultra-high pressure and high-yield reservoirs.Second,the weak compaction,early charging,and weak cementation for pore-preserving,together with the ultra-high pressure for pore-preserving and fracture expansion to improve the permeability,leads to the development of high-quality reservoirs with medium porosity(greater than 15%)and medium permeability(up to 226×10^(-3)μm^(2))in the ultra-deep strata(deeper than 6500 m),which represents a greatly expanded space for oil and gas exploration.Third,the Linhe Formation adjacent to the trough exhibits a low net-to-gross(NTG)and good reservoir-caprock assemblage,and it is overlaid by very thick high-quality mudstone caprock,which are conducive to the continuous and efficient hydrocarbon generation and pressurization and the formation of ultra-high pressure oil and gas reservoirs.Fourth,the most favorable targets for ultra-deep exploration are the zones adjacent to the hydrocarbon generating center of the Paleogene Linhe Formation and with good tectonic setting and structural traps,mainly including the Xinglong faulted structural zone and the Nalinhu faulted buried-hill zone.The significant breakthrough of ultra-deep oil and gas exploration in the Linhe Depression reveals the good potential of ultra-deep clastic rocks in this area,and provides valuable reference for oil and gas exploration of ultra-deep clastic rocks in other areas.

Research advances on the mechanisms of reservoir formation and hydrocarbon accumulation and the oil and gas development methods of deep and ultra-deep marine carbonates

Based on the new data of drilling, seismic, logging, test and experiments, the key scientific problems in reservoir formation, hydrocarbon accumulation and efficient oil and gas development methods of deep and ultra-deep marine carbonate strata in the central and western superimposed basin in China have been continuously studied.(1) The fault-controlled carbonate reservoir and the ancient dolomite reservoir are two important types of reservoirs in the deep and ultra-deep marine carbonates. According to the formation origin, the large-scale fault-controlled reservoir can be further divided into three types:fracture-cavity reservoir formed by tectonic rupture, fault and fluid-controlled reservoir, and shoal and mound reservoir modified by fault and fluid. The Sinian microbial dolomites are developed in the aragonite-dolomite sea. The predominant mound-shoal facies, early dolomitization and dissolution, acidic fluid environment, anhydrite capping and overpressure are the key factors for the formation and preservation of high-quality dolomite reservoirs.(2) The organic-rich shale of the marine carbonate strata in the superimposed basins of central and western China are mainly developed in the sedimentary environments of deep-water shelf of passive continental margin and carbonate ramp. The tectonic-thermal system is the important factor controlling the hydrocarbon phase in deep and ultra-deep reservoirs, and the reformed dynamic field controls oil and gas accumulation and distribution in deep and ultra-deep marine carbonates.(3) During the development of high-sulfur gas fields such as Puguang, sulfur precipitation blocks the wellbore. The application of sulfur solvent combined with coiled tubing has a significant effect on removing sulfur blockage. The integrated technology of dual-medium modeling and numerical simulation based on sedimentary simulation can accurately characterize the spatial distribution and changes of the water invasion front.Afterward, water control strategies for the entire life cycle of gas wells are proposed, including flow rate management, water drainage and plugging.(4) In the development of ultra-deep fault-controlled fractured-cavity reservoirs, well production declines rapidly due to the permeability reduction, which is a consequence of reservoir stress-sensitivity. The rapid phase change in condensate gas reservoir and pressure decline significantly affect the recovery of condensate oil. Innovative development methods such as gravity drive through water and natural gas injection, and natural gas drive through top injection and bottom production for ultra-deep fault-controlled condensate gas reservoirs are proposed. By adopting the hierarchical geological modeling and the fluid-solid-thermal coupled numerical simulation, the accuracy of producing performance prediction in oil and gas reservoirs has been effectively improved.

A Novel Fracturing Fluid with High-Temperature Resistance for Ultra-Deep Reservoirs

Ultra-deep reservoirs play an important role at present in fossil energy exploitation.Due to the related high temperature,high pressure,and high formation fracture pressure,however,methods for oil well stimulation do not produce satisfactory results when conventional fracturing fluids with a low pumping rate are used.In response to the above problem,a fracturing fluid with a density of 1.2~1.4 g/cm^(3)was developed by using Potassium formatted,hydroxypropyl guanidine gum and zirconium crosslinking agents.The fracturing fluid was tested and its ability to maintain a viscosity of 100 mPa.s over more than 60 min was verified under a shear rate of 1701/s and at a temperature of 175℃.This fluid has good sand-carrying performances,a low viscosity after breaking the rubber,and the residue content is less than 200 mg/L.Compared with ordinary reconstruction fluid,it can increase the density by 30%~40%and reduce the wellhead pressure of 8000 m level reconstruction wells.Moreover,the new fracturing fluid can significantly mitigate safety risks.

Control of Earth system evolution on the formation and enrichment of marine ultra-deep petroleum in China

Taking the Paleozoic of the Sichuan and Tarim basins in China as example,the controlling effects of the Earth system evolution and multi-spherical interactions on the formation and enrichment of marine ultra-deep petroleum in China have been elaborated.By discussing the development of“source-reservoir-seal”controlled by the breakup and assembly of supercontinents and regional tectonic movements,and the mechanisms of petroleum generation and accumulation controlled by temperature-pressure system and fault conduit system,Both the South China and Tarim blocks passed through the intertropical convergence zone(ITCZ)of the low-latitude Hadley Cell twice during their drifts,and formed hydrocarbon source rocks with high quality.It is proposed that deep tectonic activities and surface climate evolution jointly controlled the types and stratigraphic positions of ultra-deep hydrocarbon source rocks,reservoirs,and seals in the Sichuan and Tarim basins,forming multiple petroleum systems in the Ediacaran-Cambrian,Cambrian-Ordovician,Cambrian-Permian and Permian-Triassic strata.The matching degree of source-reservoir-seal,the type of organic matter in source rocks,the deep thermal regime of basin,and the burial-uplift process across tectonic periods collectively control the entire process from the generation to the accumulation of oil and gas.Three types of oil and gas enrichment models are formed,including near-source accumulation in platform marginal zones,distant-source accumulation in high-energy beaches through faults,and three-dimensional accumulation in strike-slip fault zones,which ultimately result in the multi-layered natural gas enrichment in ultra-deep layers of the Sichuan Basin and co-enrichment of oil and gas in the ultra-deep layers of the Tarim Basin.

Heat transfer and temperature evolution in underground mininginduced overburden fracture and ground fissures: Optimal time window of UAV infrared monitoring

Heat transfer and temperature evolution in overburden fracture and ground fissures are one of the essential topics for the identification of ground fissures via unmanned aerial vehicle(UAV) infrared imager. In this study, discrete element software UDEC was employed to investigate the overburden fracture field under different mining conditions. Multiphysics software COMSOL were employed to investigate heat transfer and temperature evolution of overburden fracture and ground fissures under the influence of mining condition, fissure depth, fissure width, and month alternation. The UAV infrared field measurements also provided a calibration for numerical simulation. The results showed that for ground fissures connected to underground goaf(Fissure Ⅰ), the temperature difference increased with larger mining height and shallow buried depth. In addition, Fissure Ⅰ located in the boundary of the goaf have a greater temperature difference and is easier to be identified than fissures located above the mining goaf. For ground fissures having no connection to underground goaf(Fissure Ⅱ), the heat transfer is affected by the internal resistance of the overlying strata fracture when the depth of Fissure Ⅱ is greater than10 m, the temperature of Fissure Ⅱ gradually equals to the ground temperature as the fissures’ depth increases, and the fissures are difficult to be identified. The identification effect is most obvious for fissures larger than 16 cm under the same depth. In spring and summer, UAV infrared identification of mining fissures should be carried out during nighttime. This study provides the basis for the optimal time and season for the UAV infrared identification of different types of mining ground fissures.

Research progress and development of deep and ultra-deep drilling fluid technology

The research progress of deep and ultra-deep drilling fluid technology systematically reviewed,the key problems existing are analyzed,and the future development direction is proposed.In view of the high temperature,high pressure and high stress,fracture development,wellbore instability,drilling fluid lost circulation and other problems faced in the process of deep and ultra-deep complex oil and gas drilling,scholars have developed deep and ultra-deep high-temperature and high-salt resistant water-based drilling fluid technology,high-temperature resistant oil-based/synthetic drilling fluid technology,drilling fluid technology for reservoir protection and drilling fluid lost circulation control technology.However,there are still some key problems such as insufficient resistance to high temperature,high pressure and high stress,wellbore instability and serious lost circulation.Therefore,the development direction of deep and ultra-deep drilling fluid technology in the future is proposed:(1)The technology of high-temperature and high-salt resistant water-based drilling fluid should focus on improving high temperature stability,improving rheological properties,strengthening filtration control and improving compatibility with formation.(2)The technology of oil-based/synthetic drilling fluid resistant to high temperature should further study in the aspects of easily degradable environmental protection additives with low toxicity such as high temperature stabilizer,rheological regulator and related supporting technologies.(3)The drilling fluid technology for reservoir protection should be devoted to the development of new high-performance additives and materials,and further improve the real-time monitoring technology by introducing advanced sensor networks and artificial intelligence algorithms.(4)The lost circulation control of drilling fluid should pay more attention to the integration and application of intelligent technology,the research and application of high-performance plugging materials,the exploration of diversified plugging techniques and methods,and the improvement of environmental protection and production safety awareness.

大比例尺综合物化探测量在浅覆盖区脉状金矿中的找矿实践——以胶东东部乳山于家圈金矿为例

胶东是全球三大金矿集区之一和中国最重要的黄金资源基地,脉状金矿床在胶东广泛分布。胶东东部第四系覆盖层薄但分布广泛,且植被发育,导致地表找矿标志不明显,传统单一的找矿方法对脉状金矿识别难度较大,加之地质勘查程度不断提高,导致该区脉状金矿找矿难度较大。位于胶东东部浅覆盖区的乳山于家圈地区发育1处以金为主的水系沉积物综合异常,该异常强度高,规模较大,浓集中心明显,元素套合好,显示出良好的找矿潜力。本次利用1∶1万地物(激电中梯)化(土壤)综合剖面对对该异常进行了查证,发现6条金矿化蚀变带,快速查明了引起异常的原因,圈定了找矿靶区;利用槽探和钻探工程对该异常及矿化蚀变带进行了揭露和控制,发现了山东省乳山市于家圈金矿床,取得了良好的找矿效果,证明了大比例尺综合物化探测量在胶东东部浅覆盖区寻找脉状金矿的有效性。

深厚覆盖层上高土石坝地震反应分析研究现状及展望

我国正在开展强震区超深厚覆盖层上建坝工作,深厚覆盖层上高土石坝地震反应分析方面仍存在问题亟待解决。从高土石坝及周围地层初始物理力学状态的描述,地震动输入机制,筑坝材料、覆盖层材料和各种接触面本构模型,边值问题求解四个方面对已有研究基础进行了总结评述,在此基础上,从理论方法、技术手段和规律机理3个层面对深厚覆盖层上高土石坝地震反应分析研究进行了展望。

特厚煤层覆岩关键层判定及运移规律相似模拟研究

为摸清宽沟煤矿W1123工作面在实体煤及采空区下开采的覆岩运移规律,搭建综放面走向方向物理相似模拟实验模型,利用全站仪和百分表对模型回采过程中工作面覆岩运移以及下沉值进行定期全方位监测,探讨关键层及特厚煤层对覆岩垮落的影响,分析覆岩运移规律。结果表明:层厚为15.9 m的粗粒砂岩为主关键层;W1145工作面回采至104 m时,工作面覆岩老顶垮落,形成由主关键层组成的拱形稳定结构,回采至192 m时,回采特厚煤层产生较强矿压汇集至主关键层,其控制的覆岩结构发生失稳,产生较大面积垮落,矿压显现强烈,回采结束时,最大下沉值达1.4 m;W1123工作面回采至396 m时,距工作面前方10 m处岩层出现裂隙并突然垮落,两工作面发生贯通,最大下沉值达2.6 m,回采结束时,最大下沉值达1.38 m。为采空区岩层的稳定性研究提供科学依据。

丁集煤矿1632(3)工作面留设防水煤岩柱方法

为了探索1632(3)工作面防水煤岩柱的合理留设方法,实现对煤炭资源的安全开采。首先,分析了工作面水文地质情况、新生界下部含、隔水层富水性特征以及基岩风化带隔水性能。然后,确定了工作面水体采动等级和覆岩类型,模拟分析了工作面覆岩的破坏特征。最后,应用相关规程规范、实际工程类比和数值模拟的方法,分析确定了工作面防水煤岩柱的合理留设高度,阐明了工作面安全开采是可行的。

覆岩离层注浆对地表减沉及瓦斯涌出的影响研究

覆岩离层注浆技术因其优异的地表减沉效果,在绿色开采中得到了广泛应用。以新大地煤矿8105工作面为例,通过数值模拟和现场试验,研究了无覆岩离层注浆和有覆岩离层注浆条件下覆岩变形规律,并对采场瓦斯涌出规律进行了对比分析。结果表明:随着注浆压力的增大,离层上方岩层的下沉量减小,离层下方岩层的下沉量增大;煤层下方底板岩层的鼓起位移逐渐减小,覆岩离层注浆显著改变了覆岩卸压区的几何形态和范围,覆岩离层注浆后的工作面瓦斯涌出总量下降了52.2%。

基于梯形塌陷模型的煤层开采覆岩冒落带高度分析

针对我国煤层在开采过程中经常发生工作面迎头顶板突水,甚至发生溃砂、突泥事故的问题,基于矿压控制实用理论,以沙坪煤矿13102工作面为研究对象,揭示了断裂线型即导水裂隙带型的工作面迎头突水机理,并推导了煤层开采引起的顶板覆岩冒落带演化规律和顶板沉降过程中的应力状态。针对煤矿开采后覆岩冒落带的演化特征,提出了梯形垮落模型来描述覆岩垮落形式,并计算冒落带的高度利用数值模拟验证了理论模型和覆岩冒落带高度计算方法的适用性。

基于数值模拟和现场监测的近距离煤层覆岩结构及支架载荷研究

甘庄煤矿14号煤层受上部8号煤层开采影响,矿压显现强烈。为确定下部煤层开采时支架的工作阻力,运用理论分析、数值模拟和现场实测的方式对近距离煤层下部煤层开采的顶板结构及工作面支架载荷展开研究。研究表明,11号煤层开采后底板损伤深度为4.3 m,14号煤层顶板属于承载层部分损伤类型;理论计算得出14号煤层开采后工作面支架阻力为7043.24 kN;数值模拟结果显示下部煤层开采至100 m后,顶板塑性区与上煤层采空区形成周期性贯通,回采期间最大支架阻力为6611.5 kN;现场监测的支架最大阻力为6769 kN,均小于支架额定工作阻力,研究对于指导近距离煤层开采时的支架参数设计和优化开采方案具有借鉴意义。

Longwall surface subsidence control by technology of isolated overburden grout injection

Surface subsidence is a typical ground movement due to longwall mining, which causes a series of environmental problems and hazards. In China, intensive coal extractions are commonly operated under dense-populated coalfields, which exacerbates the negative subsequences resulted from surface settlement. Therefore, effective approaches to control the ground subsidence are in urgent need for the Chinese coal mining industry. This paper presents a newly developed subsidence control technology: isolated overburden grout injection, including the theory, technique and applications. Relevant procedures such as injection system design, grouting material selection, borehole layout, grout take estimation and injection process design are proposed. The applicability of this technology has been demonstrated through physical modelling, field measurements, and case studies. Since 2009, the technology has been successfully applied to 14 longwall areas in 9 Chinese coal mines. The ultimate surface subsidence factors vary from 0.10 to 0.15. This method has a great potential to be popularized and performed where longwall mining are implemented under villages and ground infrastructures.