Preparation technology of ultra-fine powders of Auricularia auricular

Conventional mechanical method and mechanical method combined with vacuum freeze-drying technology were used to make the ultra-fine powders of edible fungus (Auricularia auricular). The content of basic nutrients, amino acid, micro structure and their properties of raw edible fungus and the edible fungus powders obtained with the two methods were analyzed and compared. The granularity size and micro-structure of the pulverized samples were analyzed by SEM and TEM technology. The average granularity size of the edible fungus powder obtained with mechanical method was 1–5 μm, while that obtained with mechanical method combined with vacuum freeze-drying process was 0.5–1 μm. The ultra-fine powders of edible fungus obtained with the two methods had better water recovery capability and quality, and their preserving time was longer than that of raw edible fungus. All the properties of the ultra-fine powders of edible fungus obtained with the vacuum freeze-drying technology were evidently superior to that of the conventional mechanical method. Keywords Auricularia auricula - Edible fungus - Ultra-fine powders - Vacuum freeze-drying CLC number TS205 Document code B Biography: YANG Chun-yu (1975), female, Ph. D. in Engineering Technology Center of Forestry and Wood Workine, Machinery, Northeast Forestry University, Harbin 150040, P. R. China.Responsible editor: Zhu Hong

Optimal Conditions for Preparing Ultra-Fine CeO_2 Powders in A Submerged Circulative Impinging Stream Reactor

Cerium carbonate powders were produced in a submerged circulation impinging stream reactor （SCISR） from Ce（NO3）3· 6H2O. NH4HCO3 was used as a precipitant in the reaction. Cerium carbonate powders were roasted to produce ultra-fine cerium dioxide （CeO2） powders. The optimal conditions of such production process were obtained by orthogonal and one-factor experiments. The results showed that ultra-fine and narrowly distributed cerium carbonate powders were produced under the optimal flowing conditions. The concentrations of Ce（NO3）3 and NH4HCO3 solutions were 02,5 and 0.3 mol · L^-1, respectively. The concentration of PEG4000 added in these two solutions was 4 g · L^-1. The stirring ratio, reaction temperature, feeding time, solution pH, reaction time and digestion time were 900 r · min^- 1,80 ℃, 20 min, 5 - 6, 5 min and 1 h, respectively. The final product, CeO2 powders, was obtained by roasting the produced cerium carbonate in air for 3 h at 500 ℃. The finally produced CeO2 powders were torispherical particles with a narrow size distribution of 0.8 -2.5 μm. The crystal structure of CeO2 powders belonged to cubic crystal system and its space point 5 group was OH^5-FM3M. Under optimal conditions, powders produced by SCISR were finer and more narrowly distributed than that by Stirred Tank Reactor （STR）.

DYNAMIC RHEOLOGICAL BEHAVIOR OF POLYPROPYLENE FILLED WITH ULTRA-FINE POWDERED RUBBER PARTICLES

Dynamic rheological characteristics of polypropylene (PP) filled with ultra-fine full-vulcanized powdered rubber (UFPR) composed of styrene-butadiene copolymer were studied through dynamic rheological measurements on an Advanced Rheometric Expansion System (ARES). A specific viscoelastic phenomenon, i.e. 'the second plateau', appeared at low frequencies, and exhibits a certain dependence on the amount of rubber particles and the dispersion state in the matrix. This phenomenon is attributed to the formation of aggregation structure of rubber particles. The analyses of Cole-Cole diagrams of the dynamic viscoelastic functions suggest that the heterogeneity of the composites is enhanced on increasing both particle content and temperature.

An improved sodium silicate binder modified by ultra-fine powder materials

This paper presents a new method of modifying sodium silicate binder with ultra-fine powders. The sodium silicate binder modified by ultra-fine powder A and the organic B can reduce the addition amount of the binder. The results indicate that the 24 h strength has increased by 39.9% at room temperature and the residual strength has decreased by 30.7% at 800℃, compared to the conventional sodium silicate. An available material to improve the moisture resistance was also found by adding about 2% more inorganic C, and it can increase the moist strength by 20%. In the end, the microanalyses are given to explain the modifying machanism, i. e., the ultra-fine powder A can refine the sodium silicate binder to avoid holes in the binder bond, which can increase the 24 h strength at room temperture, and can lead to more cracks in the bond after the molding sand is heated to 800℃. This is because of the stress caused by the new eutectic complex of modified sodium silicate binder.

Hydrogen Reduction:A Novel Method of Synthesizing Ultra-fine Chromic Oxide Powder

The ultra-fine chromic oxide powder was prepared by a novel gas-solid reduction reaction.Na2CrO4 was firstly reduced with hydrogen at 400-600 ℃.The obtained reduction products,mainly the mixture of NaCrO2 and sodium hydroxide（NaOH）,were converted into chromic oxide through hydrolysis followed by calcination.The obtained chromic oxide product was characterized by powder X-ray diffraction（XRD） and SEM.The results show that the hydrolysis process of sodium chromite is the key step and lower reduction temperature helps intensify the hydrolysis process.

Strengthening of HT250 by modified ultra-fine ceramic powders

In this study, three kinds of modified ultra-fine ceramic powders marked A, B and C, which were prepared by each of three different modifiers mixing with a commercial SiC, were added to HT250 cast iron, respectively, and the effects of the modified ultra-fine ceramic powders on microstructure, mechanical properties and wear resistance were studied. Metallographic examination, tensile test, scanning electron microscopy, and three-dimensional surface topography were applied to analyze and compare the samples containing modified powder with the original samples. The results showed that the most obvious modification effect among the powders was seen in the sample containing powder A, with the graphite and eutectic cells being refined, the tensile strength being increased by 36.9%, and the wear resistance being improved by 45.5% and 47.2% under loads of 150 N and 300 N, respectively. The improvements of mechanical properties and wear resistance in the HT250 cast iron with the modified ultra-fine ceramic powders were attributed to the synergistic effect of the grain refinement with the powder acting as a hard particle phase and the lubrication by the graphite.

Coal combustion restrained by ultra-fine water mist in confined space

In order to apply ultra-fine water mist technology on spontaneous coal combustion in the goaf of a coal mine, we built a small scale compartment with ultra-fine water mist for restraining coal combustion in a confined space and then investigated the restraining efficiency and related factors. The study obtained the following results： a descending rate of heat release, an increase in 02, the production of CO2 decreased gradually, while the production of CO increased dramatically and quickly and then decreased; ultimately it tended to become stable after the discharge of an ultra-fine water mist. The technology showed that the ultra-fine water mist can effectively reduce the heat release rate of coal and the rate to generate components. We found that the restraining effect relied on the mist flux, the discharge time and other factors. A sufficient amount of mist has a better effect compared to an insufficient amount of mist. To combat coal combustion, the greater the discharge time, the better coal flames are extinguished.

Preparation of Ultra-fine Salbutamol Sulfate Particles by Reactive Precipitation and Characterization of Dry Powder Inhalant

The preparation of ultra-fine particles of salbutamol sulphate （SS） was accomplished with a reactive precipitation pathway, in which salbutamol and sulphuric acid were Used as reactants with the solvents of ethanol.The effects of sulphuric acid concentration, reaction temperature, stirring rate, and reaction time onthesize of the particle were investigated. A binary mixture composed of lactose and SS was prepared to evaluate SS. The results showed that ultra-fine SS particles with controlled diameters ranging between 3 μm and 0.8 μm and with a narrow distribution could be achieved. The morphology consisting of clubbed particles wassuccess.fully obtained. The purity of the particles reached above 98% with-UV detection. The dose- of dry powder inhalation was obtained by blending the particles with recrystallized lactose, which acted as a carrier. The deposition quantity of the drug in breathing tract was estimated using a twin imPinger apparatus. Compared with the Shapuer powder （purchased in the market）, the results showed that SS_particles had more quantifies.subsided in simulative lung.. _

Adsorption Behavior of Methyl Orange onto Modified Ultrafine Coal Powder

The adsorption of methyl orange onto ultrafine coal powder （UCP） and modified ultrafine coal powder （MUCP） from aqueous solutions were studied, in which the influence of contact time, dosage, temperature, pH, and methyl orange concentration in the solution were investigated. The adsorption kinetics of methyl orange by UCP and MUCP can be described by the Lagergren first-order and pseudo second-order kinetic models, respectively. The adsorption isotherms of methyl orange onto MUCP at 303, 313 and 323 K follow the Freundlich and Langmuir isotherm equation. Values of △G^0 for methyl orange adsorption onto MUCP are -22.55, -23.10 and -23.79 kJ·mol^-1 at 303, 313, and 323 K, respectively. The values of △H^0 and △S^0 are -3.74 kJ· mol^-1 and 61.99 J·mol^-1, respectively. The adsorption process is spontaneous and exothermic.

Preparation of Well Dispersed and Ultra-Fine Ce(Zr)O_2 Mixed Oxide by Mechanochemical Processing

Ultra-fine CeO_2-ZrO_2 mixed oxide was successfully synthesized by wet-solid phase mechanochemical processing, Ce_2(CO_3)_3·8H_2O, ZrOCl_2·xH_2O and ammonia were used as reactants. It is found that the crystalline Ce_2(CO_3)_3·8H_2O and ZrOCl_2·xH_2O are changed to amorphous cerium and zirconium hydroxide precursor after milling with ammonia, and Ce_(0.15)Zr_(0.85)O_2 mixed oxide with pure tetragonal phase structure and medium particle size(D_(50))less than 1μm is formed by calcining precursor over 673 K. The XRD patterns indicate that the crystal unite size increases with rising calcining temperature due to crystal growth. However, the particle size and BET surface area of the Ce(Zr)O_2 mixed oxide decreases with rising calcining temperature, which may be attributed to the contract of particles and the vanish of holes inside grains.

Thermal oxidation of SiAlON powders synthesized from coal gangue

The oxidation behavior of different SiAlON phases（β-SiAlON,X-phase SiAlON and 12H powders） synthesized from coal gangue in air atmosphere was investigated using isothermal thermogravimetry（TG） and field-emission scanning electron microscopy（FE-SEM）.The effect of ferric oxide impurities in coal gangue was studied.The results show that ferric oxide contributes to the growth of SiAlON crystalline during the synthesis process.In the oxidation experiment,the existence of ferric oxide decreases the oxidation resistance of SiAlON.The reason is that the impurity causes the formation of a liquid phase at a higher temperature.At 1423-1623 K,the oxidation of SiAlON powders is diffusion controlled and it can be described by Chou＇s model.A fair agreement is found between theoretical calculations and the experimental data.

Study on the Evaporation Kinetics of Zinc and Lead in Zn-Pb-Bearing Dust Pellets Mixed with Coal Powder

The study on the evaporation kinetics of zinc and lead in the pellets made of ZnPbbearing dust mixed with carbon ,in nitrogen atmosphere at the temperature range between 1 100 and 1 300 , shows that the reduction temperature has a significant effect on the evaporation rates of zinc and lead and that both the particle size of coal powder and the extra carbon content have no effect on the evaporation rates . The obtained activation energies for the evaporation of zinc and lead are 7942 kJ/mol and 8874kJ/mol respectively. The evaporation rate of zinc is controlled by the reaction between zinc oxide and CO while that of lead is controlled by lead volatilization and the diffusion of gaseous lead through gas boundary layer covering the surface of liquid lead.

A novel method for measuring the moisture content of coal powder by microwave resonator

A novel technique for the quick measurement moisture content of coal powder by microwave was studied. The effects of the various moisture contents on the measurement results were also discussed. The experimental results show that the standard deviation is less than 0.36% when the moisture content of coal powder is 0.74%-16.90% and the standard deviation is less than 0.16% when the moisture content is 0.31%-1.49%. The experimental results indicate that a process of quick measurement moisture content of coal powder by microwave is practical.

Study on Inorganic Flocculant Prepared from Powdered Coal Ashes

The feasibility of preparing flocculant from powdered coal ashes is studied in detail. By means of orthogonal tests, the influence of various factors, such as the activation temperature, the activation time, the ratio of CaO to Al2O3, the hydrochloric acid concentration, the reaction time and the reaction temperature, on preparation is investigated, and the hest operating condition is determined.

Carbothermal Reduction Synthesis of Al_2O_3-SiC Powders from Coal Gangue

The Al2O3 -SiC composite powders were prepared in argon atmosphere rising coal gangue and carbonaceous materials （ carbon black, active carbon and antbravite） as starting materials by carbothermal reduction. Effects of excessive carbon addition, carbon types. temperature, soaking time. shaping pressure, types and amount of additives on phase composition and micro-structure of the Al2O3 - SiC composite powders were investigated. The re.suits indicate that： temperature, soaking time and chloride additi＇ve have significant influence on the synthesized Al2O3 -SiC composite powders. Based on the results, the optimized Al2O3 -SiC composite powders , Al2O3 58 mass% and SiC 42 mass%, with particle size d50 ≤5μm were prepared using coal gangue and carbon black as starting materials after 3 h firing at 1550 ℃. and proper additive addition could reduce the temperattlre by 50 ℃.

Adsorption of phenol from water by ultrafine coal powders

Seven Shenfu coal powders different in particle size obtained by sieving and ball milling were used to probe their adsorption properties to phenol from water. The results show that the kinetics of phenol on coal powders follow the second-order adsorption kinetic model well. Adsorption processes are governed by film diffusion and the kinetic parameters and the effective diffusion coefficients were calculated through plotting. Adsorption capacities to phenol increase exponentially with decreasing of diameter of coal powders. The phenol adsorption equilibrium for coal powder with d50 of 9.30 μm can be described in terms of Freundlich isotherm, while for ultrafine coal powders with d50 of 4.28 and 4.82 μm fit Langmuir isotherm well.

STUDY ON THE FUNCTION OF REINFORCED RUBBER OF MODIFIED POWDERED COAL ASH

The powdered coal ash (PCA) was classified, then the ash particle (- 45μm) was modified by a surface active agent and obtained modified powder coal ash (MPCA). The character of the MPC was investigated, when it was used as a new type reinforced filler of rubber.The results show that MPCA can replace or party replace carbon black or silica as reinforced fillers of rubbers.

Study on the removal of Hg^0 from flue gas by coal dry powder gasification coarse slag

The prevention and treatment of mercury in coal-fired power plants has always been the focus and difficulty.How to control the pollution of mercury to human body and ecological environment quickly and effectively is a hot research topic nowadays.As a low cost and potential adsorbent,there is a huge space for the development of coal dry powder gasification coarse slag.In this paper,Mercury osmotic tubes are heated by water bath tank as mercury source,and the scavenging effect of adsorbent on Mercury monomer under different influence conditions is explored.The adsorbent plays an important role in adsorption of mercury monomer because of its special active sites on the surface.The reason is that the adsorbent surface is rich in carboxyl group,hydroxyl functional group,combined with mercury to form complexes.This shows that chemical adsorption facilitates the adsorption process.