Preparation of Ultra-fine Salbutamol Sulfate Particles by Reactive Precipitation and Characterization of Dry Powder Inhalant

The preparation of ultra-fine particles of salbutamol sulphate （SS） was accomplished with a reactive precipitation pathway, in which salbutamol and sulphuric acid were Used as reactants with the solvents of ethanol.The effects of sulphuric acid concentration, reaction temperature, stirring rate, and reaction time onthesize of the particle were investigated. A binary mixture composed of lactose and SS was prepared to evaluate SS. The results showed that ultra-fine SS particles with controlled diameters ranging between 3 μm and 0.8 μm and with a narrow distribution could be achieved. The morphology consisting of clubbed particles wassuccess.fully obtained. The purity of the particles reached above 98% with-UV detection. The dose- of dry powder inhalation was obtained by blending the particles with recrystallized lactose, which acted as a carrier. The deposition quantity of the drug in breathing tract was estimated using a twin imPinger apparatus. Compared with the Shapuer powder （purchased in the market）, the results showed that SS_particles had more quantifies.subsided in simulative lung.. _

Preparation technology of ultra-fine powders of Auricularia auricular

Conventional mechanical method and mechanical method combined with vacuum freeze-drying technology were used to make the ultra-fine powders of edible fungus (Auricularia auricular). The content of basic nutrients, amino acid, micro structure and their properties of raw edible fungus and the edible fungus powders obtained with the two methods were analyzed and compared. The granularity size and micro-structure of the pulverized samples were analyzed by SEM and TEM technology. The average granularity size of the edible fungus powder obtained with mechanical method was 1–5 μm, while that obtained with mechanical method combined with vacuum freeze-drying process was 0.5–1 μm. The ultra-fine powders of edible fungus obtained with the two methods had better water recovery capability and quality, and their preserving time was longer than that of raw edible fungus. All the properties of the ultra-fine powders of edible fungus obtained with the vacuum freeze-drying technology were evidently superior to that of the conventional mechanical method. Keywords Auricularia auricula - Edible fungus - Ultra-fine powders - Vacuum freeze-drying CLC number TS205 Document code B Biography: YANG Chun-yu (1975), female, Ph. D. in Engineering Technology Center of Forestry and Wood Workine, Machinery, Northeast Forestry University, Harbin 150040, P. R. China.Responsible editor: Zhu Hong

Experimental research and energy analysis of a new type of dry ice powder pneumatic rock breaking technology

When the traditional drill and blast method is applied to rock crushing projects,it has strong vibration,loud noise and dust pollution,so it cannot be used in densely populated areas such as urban public works.We developed a supercritical CO_(2)true triaxial pneumatic rock-breaking experimental system,and conducted laboratory and field tests of dry ice powder pneumatic rock-breaking.The characteristics of the blast-induced vibration velocity waveform and the evolution of the vibration velocity and frequency with the focal distance were analyzed and discussed.The fracturing mechanism of dry ice powder pneumatic rock breaking is studied.The research results show that:(1)The vibration velocity induced by dry ice powder pneumatic rock breaking decays as a power function with the increase of the focal distance;(2)The vibration frequency caused by dry ice powder pneumatic rock breaking is mainly distributed in 1–120 Hz.Due to the dispersion effect,the dominant frequency of 10–30 Hz appears abnormally attenuated;(3)The traditional CO_(2)phase change fracturing energy calculation formula is also applicable to dry ice pneumatic rock breaking technology,and the trinitrotoluene(TNT)equivalent of fracturing energy is applicable to the Sadovsky formula;(4)Dry ice powder pneumatic rock breaking is shock wave and highenergy gas acting together to fracture rock,which can be divided into three stages,among which the gas wedge action of high-energy gas plays a dominant role in rock mass damage.

Optimal Conditions for Preparing Ultra-Fine CeO_2 Powders in A Submerged Circulative Impinging Stream Reactor

Cerium carbonate powders were produced in a submerged circulation impinging stream reactor （SCISR） from Ce（NO3）3· 6H2O. NH4HCO3 was used as a precipitant in the reaction. Cerium carbonate powders were roasted to produce ultra-fine cerium dioxide （CeO2） powders. The optimal conditions of such production process were obtained by orthogonal and one-factor experiments. The results showed that ultra-fine and narrowly distributed cerium carbonate powders were produced under the optimal flowing conditions. The concentrations of Ce（NO3）3 and NH4HCO3 solutions were 02,5 and 0.3 mol · L^-1, respectively. The concentration of PEG4000 added in these two solutions was 4 g · L^-1. The stirring ratio, reaction temperature, feeding time, solution pH, reaction time and digestion time were 900 r · min^- 1,80 ℃, 20 min, 5 - 6, 5 min and 1 h, respectively. The final product, CeO2 powders, was obtained by roasting the produced cerium carbonate in air for 3 h at 500 ℃. The finally produced CeO2 powders were torispherical particles with a narrow size distribution of 0.8 -2.5 μm. The crystal structure of CeO2 powders belonged to cubic crystal system and its space point 5 group was OH^5-FM3M. Under optimal conditions, powders produced by SCISR were finer and more narrowly distributed than that by Stirred Tank Reactor （STR）.

DYNAMIC RHEOLOGICAL BEHAVIOR OF POLYPROPYLENE FILLED WITH ULTRA-FINE POWDERED RUBBER PARTICLES

Dynamic rheological characteristics of polypropylene (PP) filled with ultra-fine full-vulcanized powdered rubber (UFPR) composed of styrene-butadiene copolymer were studied through dynamic rheological measurements on an Advanced Rheometric Expansion System (ARES). A specific viscoelastic phenomenon, i.e. 'the second plateau', appeared at low frequencies, and exhibits a certain dependence on the amount of rubber particles and the dispersion state in the matrix. This phenomenon is attributed to the formation of aggregation structure of rubber particles. The analyses of Cole-Cole diagrams of the dynamic viscoelastic functions suggest that the heterogeneity of the composites is enhanced on increasing both particle content and temperature.

An improved sodium silicate binder modified by ultra-fine powder materials

This paper presents a new method of modifying sodium silicate binder with ultra-fine powders. The sodium silicate binder modified by ultra-fine powder A and the organic B can reduce the addition amount of the binder. The results indicate that the 24 h strength has increased by 39.9% at room temperature and the residual strength has decreased by 30.7% at 800℃, compared to the conventional sodium silicate. An available material to improve the moisture resistance was also found by adding about 2% more inorganic C, and it can increase the moist strength by 20%. In the end, the microanalyses are given to explain the modifying machanism, i. e., the ultra-fine powder A can refine the sodium silicate binder to avoid holes in the binder bond, which can increase the 24 h strength at room temperture, and can lead to more cracks in the bond after the molding sand is heated to 800℃. This is because of the stress caused by the new eutectic complex of modified sodium silicate binder.

Studies on the spray dried lactose as carrier for dry powder inhalation

The purpose of this study was to investigate the spray dried lactose as carrier for dry powder inhalation(DPI).The lactose particles were prepared by spray drying,then the particle size,shape and crystal form were characterized by laser diffraction,scanning electron microscopy(SEM),X-ray diffraction(XRD)and differential scanning calorimetry(DSC).The spray dried lactose particles were spherical and amorphous,but would transfer to crystal form when storage humidity was above 32%.Thus,the humidity of the storage environment should be controlled below 30%strictly in order to maintain the amorphous nature of spray dried lactose which is a great benefit to DPI development.

Hydrogen Reduction:A Novel Method of Synthesizing Ultra-fine Chromic Oxide Powder

The ultra-fine chromic oxide powder was prepared by a novel gas-solid reduction reaction.Na2CrO4 was firstly reduced with hydrogen at 400-600 ℃.The obtained reduction products,mainly the mixture of NaCrO2 and sodium hydroxide（NaOH）,were converted into chromic oxide through hydrolysis followed by calcination.The obtained chromic oxide product was characterized by powder X-ray diffraction（XRD） and SEM.The results show that the hydrolysis process of sodium chromite is the key step and lower reduction temperature helps intensify the hydrolysis process.

Strengthening of HT250 by modified ultra-fine ceramic powders

In this study, three kinds of modified ultra-fine ceramic powders marked A, B and C, which were prepared by each of three different modifiers mixing with a commercial SiC, were added to HT250 cast iron, respectively, and the effects of the modified ultra-fine ceramic powders on microstructure, mechanical properties and wear resistance were studied. Metallographic examination, tensile test, scanning electron microscopy, and three-dimensional surface topography were applied to analyze and compare the samples containing modified powder with the original samples. The results showed that the most obvious modification effect among the powders was seen in the sample containing powder A, with the graphite and eutectic cells being refined, the tensile strength being increased by 36.9%, and the wear resistance being improved by 45.5% and 47.2% under loads of 150 N and 300 N, respectively. The improvements of mechanical properties and wear resistance in the HT250 cast iron with the modified ultra-fine ceramic powders were attributed to the synergistic effect of the grain refinement with the powder acting as a hard particle phase and the lubrication by the graphite.

Preparation of high emissivity NiCr_2O_4 powders with a spinel structure by spray drying

Spray-drying was used to produce the high emissivity NiCr2O4 powders with a spinel structure. Preliminary investigations focused on fabricating the high emissivity powders for infrared radiation coatings and finding the relationship between microstructure and emissivity. The NiCr2O4 powders were characterized for composition, microstructure, and infrared emissivity by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, infrared radiant instrument, and Fourier transform infrared spectra （FT-IR）. Thermogravimetry and differential thermal analysis show that the appropriate baking temperature for NiCr2O4 powder preparation is about 1200？C. The emissivity measurement and FT-IR spectra show that, because of the special spinel structure, the NiCr2O4 powders have a high emissivity about 0.91. Spray-drying is a suitable method to produce the high emissivity ceramic powders.

Pulmonary delivery of liposomal dry powder inhaler formulation for effective treatment of idiopathic pulmonary fibrosis

Dry powder inhaler Liposomes were prepared to investigate the effectiveness of pulmonary delivery of Colchicine and Budesonide for Idiopathic Pulmonary fibrosis. Budesonide(BUD) and Colchicine(COL) liposomes were prepared by thin layer film hydration method(TFH) using 1,2-Dipalmitoyl-sn-glycero-3-phosphoglycerol sodium(DPPG), Hydrogenated Soyaphosphotidylcholine(HSPC), Soyaphosphatidylcholine(SPC), cholesterol(CHOL) and drug in different weight ratios. The optimum lipid composition for BUD(74.22 ± 0.97%) was DPPG:HSPC: CHOL(4:5:1) and for COL(50.94 ± 2.04%) was DPPG: SPC: CHOL(3:6:1). These compositions retained drug for a longer period of time so selected for further study. Liposomes were found to be spherical in shape with mean size below 100 nm. Liposomes lyophilized using Mannitol as carrier and cryoprotectant showed high entrapment efficiency(97.89-98.6%). The powder was dispersed through an Andersen cascade impactor to evaluate the performance of the aerosolized powder. It was found that prepared liposomal dry powder inhaler(DPIs) sustained the drug release up to 24 hours. Optimized Budesonide DPI Formulation B2(86.53 ± 1.9%), Colchicine DPI Formulation C2(90.54 ± 2.3 %) and BUD and COL DPI Combination M2(89.91 ± 1.8%, 91.23 ± 1.9%). Histopathological results, measurements of lung hydroxyproline content, Myeloperoxidase activity indicated that liposomal drypowder inhaler administration attenuates lung fibrosis induced by bleomycin. Long term stability studies indicated that lyophilised BUD and COL liposomes were stable for 6 months at(25 °C± 2 °C, 60% ± 5% RH) and refrigerated conditions(2-8 °C). These results supported that combination of budesonide and colchicine liposomal dry powder inhaler pulmonary drug delivery for treatment of idiopathic Pulmonary Fibrosis exhibits prolonged drug retention at targeted site and reduces the systemic exposure.

Salvianolic acid B dry powder inhaler for the treatment of idiopathic pulmonary fibrosis

Idiopathic pulmonary fibrosis(IPF)is a serious and fatal pulmonary inflammatory disease with an increasing incidenceworldwide.The drugs nintedanib and pirfenidone,are listed as conditionally recommended drugs in the“Evidence-Based Guidelines for the Diagnosis and Treatment of Idiopathic Pulmonary Fibrosis”.However,these two drugs have many adverse reactions in clinical application.Salvianolic acid B(Sal B),a water-soluble component of Salvia miltiorrhiza,could alleviate bleomycin-induced peroxidative stress damage,and prevent or delay the onset of IPF by regulating inflammatory factors and fibrotic cytokines during the disease’s progression.However,Sal B is poorly absorbed orally,and patient compliance is poor when administered intravenously.Therefore,there is an urgent need to find a new non-injection route of drug delivery.In this study,Sal B was used as model drug and l-leucine(LL)as excipient to prepare Sal B dry powder inhaler(Sal B-DPI)by spray drying method.Modern preparation evaluation methods were used to assess the quality of Sal B-DPI.Sal B-DPI is promising for the treatment of IPF,according to studies on pulmonary irritation evaluation,in vivo and in vitro pharmacodynamics,metabolomics,pharmacokinetics,and lung tissue distribution.

Optimization of Spray Drying Processing Technology of Mulberry Powder

With concentrated juice of mulberry as raw material, the influence of type and dosage of dry aid, the inlet air tempera- ture, inlet flow rate, and rotating speed on spray drying was studied. The spray drying processing conditions of mulberry pow- der were optimized by the L9 （3^4） orthogonal test on the basis of single factor experiment. The results showed that optimum technical parameters to produce mulberry powder were： lS-cyclodextrin as dry aids with dosage of 30%, inlet air temperature of 180 ℃, rotating speed of 18 000 r/min and inlet flow rate of 30 mL/min. The mulberry powder under this optimum process conditions had a loose structure and bright color, fruity flavor was rich, the anthocyanin content for 54.67 mg/g, moisture content for 5.6% and sensory scores for 83.

Comparative experimental study on inhibiting gas explosion using ABC dry powder and diatomite powder

Using a 20 L spherical explosion suppressing test system, the largest gas explosion pressure and maximum pressure rising rate with additives of ultra-fine ABC dry powder and diatomite powder were tested and compared, and the explosion suppression effect of the two kinds of powder was analyzed. Experimental results show that both powders can suppress gas ex- plosion and ABC dry powder is superior to diatomite powder. Adding two powders under the same experimental conditions, when methane concentration is 7.0%, the maximum explosion pressure decreased 39% and 4%, respectively, while the rising rate of the maximum pressure decreased 80% and 53%, respectively. When methane concentration is 9.5%, the maximum ex- plosion pressure decreased 14% and 12%, respectively, the rising rate of maximum pressure decreased 62% and 27%, respec- tively, the maximum explosion pressure decreased 23% and 18%, respectively, while the rising rate of the maximum pressure decreased 77% and 70%, respectively. When methane concentration is 12.0%, the explosion suppression effect of ultra-fine ABC dry powder is not affected by the methane concentration, and the explosion suppression effect of diatomite powder under high methane concentrations is more obvious.

Preparation of Well Dispersed and Ultra-Fine Ce(Zr)O_2 Mixed Oxide by Mechanochemical Processing

Ultra-fine CeO_2-ZrO_2 mixed oxide was successfully synthesized by wet-solid phase mechanochemical processing, Ce_2(CO_3)_3·8H_2O, ZrOCl_2·xH_2O and ammonia were used as reactants. It is found that the crystalline Ce_2(CO_3)_3·8H_2O and ZrOCl_2·xH_2O are changed to amorphous cerium and zirconium hydroxide precursor after milling with ammonia, and Ce_(0.15)Zr_(0.85)O_2 mixed oxide with pure tetragonal phase structure and medium particle size(D_(50))less than 1μm is formed by calcining precursor over 673 K. The XRD patterns indicate that the crystal unite size increases with rising calcining temperature due to crystal growth. However, the particle size and BET surface area of the Ce(Zr)O_2 mixed oxide decreases with rising calcining temperature, which may be attributed to the contract of particles and the vanish of holes inside grains.

Preparation of slab-shaped lactose carrier particles for dry powder inhalers by air jet milling

Dry powder inhalers are often formulated by attaching micronized drug particles onto carrier particles, which are generally lactose. In this study, commercially available lactose was air jet milled to produce unique slab-like coarse carrier particles, which have larger and rougher surfaces compared to other commercially available lactose. Two key processing factors, i.e.,classifier speed and jet milling pressure, were systematically investigated. The largest fraction of slab-like particles in the resulting powder was obtained at a classifier speed of 3000 rpm.The slab-like coarse carrier particles are expected to exhibit superior performance than commercial lactose due to their unique surface properties.

Structure-dependent re-dispersibility of graphene oxide powders prepared by fast spray drying

The graphene oxide powder(GOP)obtained from the spray drying process often exhibits poor redispersibility which is considered due to the partial reduction of GO sheets.The reduction of drying temperature can effectively increase the redispersibility of GOP,but result in a decreased drying efficiency.Herein,we found that the redispersibility of GOP is strongly affected by its microstructure,which is determined by the feed concentration.With the increase of feed concentration,the GO nanosheet assembly varies from the disordered stacking to relatively oriented assembly,making the morphology of the GOP transform from balllike(the most crumpled one)to flakelike(the least crumpled one),and the 0.8 mgml 1 is the threshold concentration for the morphology,structure,and redispersibility change.Once the feed concentration reaches 0.8 mg ml 1,the appearance of the nematic phase in droplet ensures the relatively oriented assembly of GO sheets to form the layered structure with a low crumpling degree,which greatly improves the polar parts surface tension of the solid GOP,making the GOP easier to form hydrogen bonding with water during the redispersion process,thus stabilizing dispersion.This work provides useful information for understanding the relationships between the morphology,microstructure,and final redispersibility of GOPs.

Effects of Direct Switching Dual Bronchodilators between Dry Powder and Soft Mist Inhalers in COPD Patients

Objective: Dual bronchodilation with long-acting muscarinic antagonist and long-acting β2-agonist combinations are available worldwide in COPD patients. However, the choice of agents remains under debate. We hypothesized that switching devices between dry powder and soft mist inhalers without a wash-out period to mimic clinical practice would improve clinical symptoms and lung function. The aim of this study was to examine the effects of switching between once-daily glycopyrronium/indacaterol (GLY/IND) or umeclidinium/vilanterol (UMEC/VI), dry powder inhalers, and tiotropium/olodaterol (TIO/OLO), a soft mist inhaler, in COPD patients. Methods: This was a prospective, open-label, 8-week, observational study with follow-up. Subjects included 57 COPD patients, who attended outpatient clinics at Shizuoka General Hospital for routine check-ups between February and December 2015, receiving GLY/IND (50/110 μg) or UMEC/VI (62.5/25 μg). After an 8-week run-in period, medications were switched to TIO/OLO (5/5 μg). Study outcomes included patient’s global rating (PGR), modified MRC (mMRC), COPD assessment test (CAT), and spirometric and forced oscillatory parameters after 8 weeks. PGR used in this study was a 7-point scale ranging from 1 to 7, with 4 in the middle. Patients who consented to switch from TIO/OLO to GLY/IND or UMEC/VI were followed-up thereafter. Results: In total, 53 patients completed the study (mean age, 75 years;48 males and 5 females;GOLD 1/2/3/4 = 19/27/6/1;mMRC 0/1/2/3/4 = 14/22/12/4/1;UMEC/VI 26, GLY/IND 27). PGR, mMRC, and CAT improved in 20 (38%), 9 (17%), and 15 patients (28%), respectively. Respiratory system resistance at 5 Hz (R5), 20 Hz (R20), and the difference between R5 and R20 (R5 - R20) significantly improved. In a follow-up of 16 patients after switching from TIO/OLO to UMEC/VI (9) or GLY/IND (7), PGR, mMRC, and CAT improved in 5 (31%), 3 (12%), and 4 patients (25%), respectively, and R20 significantly improved (p = 0.011). Conclusions: Switching dual bronchodilators between dry powder and soft mist inhalers improves symptoms and airway narrowing in some COPD patients.

Effects of Different Drying Methods on the Quality of Micronized Chinese Wolfberry Powder

[Objectives] To study the effects of different drying methods on quality of Chinese wolfberry powder. [Methods] The physical properties and nutritional contents of Chinese wolfberry powder prepared by hot air drying,vacuum freeze drying,microwave vacuum drying,drum drying and spray drying were measured and analyzed to explore the effects of different drying methods on quality characteristics of Chinese wolfberry powder. [Results] The total sugar content and reducing sugar contents of product: vacuum freeze drying > spray drying > microwave vacuum drying > drum drying > hot air drying; carotene and total flavonoid contents: vacuum freeze drying > microwave vacuum drying > spray drying > drum drying > hot air drying; after drying process,the dietary fiber content of product obtained by drum drying and spray drying was relatively higher,while the Vc content of Chinese wolfberry powder prepared by vacuum freeze drying was the highest. a~*value( redness to greenness) of color: vacuum freeze drying > microwave vacuum drying > spray drying > drum drying > hot air drying; the Chinese wolfberry powder prepared by vacuum freeze drying had the best solubility,hygroscopicity and rehydration ratio. [Conclusions] Microwave vacuum drying was the best method to prepare Chinese wolfberry powder,in order to keep its quality and consider the cost of production.

Synthesis of Zeolite ZSM-35 in a Dry Powder System with an Adsorbed-State Template

ＳｙｎｔｈｅｓｉｓｏｆＺｅｏｌｉｔｅＺＳＭ３５ｉｎａＤｒｙＰｏｗｄｅｒＳｙｓｔｅｍｗｉｔｈａｎＡｄｓｏｒｂｅｄＳｔａｔｅＴｅｍｐｌａｔｅＦｅｎｇＦａｎｇｘｉａ，ＤｏｕＴａｏ，ＸｉａｏＹｏｎｇｚｈｕａｎｇ（ＩｎｓｔｉｔｕｔｅｏｆＳｐｅｃｉａｌＣｈｅ...