Influence of band microstructure on carbide precipitation behavior and toughness of 1 GPa-grade ultra-heavy gauge low-alloy steel

This study investigated the influence of band microstructure induced by centerline segregation on carbide precipitation behavior and toughness in an 80 mm-thick 1 GPa low-carbon low-alloy steel plate.The quarter-thickness(1/4t)and half-thickness(1/2t)regions of the plate exhibited similar ductility and toughness after quenching.After tempering,the 1/4t region exhibited~50%and~25%enhancements in both the total elongation and low-temperature toughness at-40°C,respectively,without a decrease in yield strength,whereas the toughness of the 1/2t region decreased by~46%.After quenching,both the 1/4t and 1/2t regions exhibited lower bainite and lath martensite concentrations,but only the 1/2t region exhibited microstructure bands.Moreover,the tempered 1/4t region featured uniformly dispersed short rod-like M_(23)C_(6)carbides,and spherical MC precipitates with diameters of~20–100 nm and<20 nm,respectively.The uniformly dispersed nanosized M_(23)C_(6)carbides and MC precipitates contributed to the balance of high strength and high toughness.The band microstructure of the tempered 1/2t region featured a high density of large needle-like M3C carbides.The length and width of the large M3C carbides were~200–500 nm and~20–50 nm,respectively.Fractography analysis revealed that the high density of large carbides led to delamination cleavage fracture,which significantly deteriorated toughness.

Monitoring absolute vertical land motions and absolute sea-level changes from GPS and tide gauges data over French Polynesia

In this study,we estimate the absolute vertical land motions at three tidal stations with collocated Global Navigation Satellite System(GNSS)receivers over French Polynesia during the period 2007-2020,and obtain,as ancillary results,estimates of the absolute changes in sea level at the same locations.To verify our processing approach to determining vertical motion,we first modeled vertical motion at the International GNSS Service(IGS)THTI station located in the capital island of Tahiti and compared our estimate with previous independent determinations,with a good agreement.We obtained the following estimates for the vertical land motions at the tide gauges:Tubuai island,Austral Archipelago-0.92±0.17 mm/yr,Vairao village,Tahiti Iti:-0.49±0.39 mm/yr,Rikitea,Gambier Archipelago-0.43±0.17 mm/yr.The absolute variations of the sea level are:Tubuai island,Austral Archipelago 5.25±0.60 mm/yr,Vairao village,Tahiti Iti:3.62±0.52 mm/yr,Rikitea,Gambier Archipelago 1.52±0.23 mm/yr.We discuss these absolute values in light of the values obtained from altimetric measurements and other means in French Polynesia.

Unification of Gravitational and Strong Interaction Fields Using Partial Gauge Symmetry

We propose the new field potential by maintaining both the symmetry of the scalar gauge and the conservation law keeping N?ether’s theorem, while disregarding the symmetry of the vector gauge. The new potential forms like the well-type potential where a particle behaves almost freely but is very hard to escape without external energy, which can be interpreted as local confinement and asymptotic freedom. By assuming a 2-dimensional metric tensor in 4-dimensional space-time, we suggest the existence of 3 kinds of particles that resemble QCD with 3 color charges. We also show that the mass term exists but comes to zero and derive the charge and spin values. We can regard the particle with this new potential as a gluon, and the interaction in this well-type potential as a strong interaction for the properties of mass, charge, spin, and its behavior. We suggest the eight-fold way with this new particle, which is similar to the existing method based on SU (3) symmetry. Even though the strong interaction has been analyzed in the standard model and string theory, we build a new consistent model based on the theory of relativity including Riemann geometry, and show the unification of gravitational and strong interactional field.

Research on the strain gauge mounting scheme of track wheel force measurement system based on high-speed wheel/rail relationship test rig

Purpose-This paper aims to analyze the stress and strain distribution on the track wheel web surface and study the optimal strain gauge location for force measurement system of the track wheel.Design/methodology/approach-Finite element method was employed to analyze the stress and strain distribution on the track wheel web surface under varying wheel-rail forces.Locations with minimal coupling interference between vertical and lateral forces were identified as suitable for strain gauge installation.Findings-The results show that due to the track wheel web’s unique curved shape and wheel-rail force loading mechanism,both tensile and compressive states exit on the surface of the web.When vertical force is applied,Mises stress and strain are relatively high near the inner radius of 710 mm and the outer radius of 1110mmof the web.Under lateral force,high Mises stress and strain are observed near the radius of 670mmon the inner and outer sides of the web.As the wheel-rail force application point shifts laterally toward the outer side,the Mises stress and strain near the inner radius of 710 mm of the web gradually decrease under vertical force while gradually increasing near the outer radius of 1110 mm of the web.Under lateral force,the Mises stress and strain on the surface of the web remain relatively unchanged regardless of the wheel-rail force application point.Based on the analysis of stress and strain on the surface of the web under different wheel-rail forces,the inner radius of 870 mm is recommended as the optimal mounting location of strain gauges for measuring vertical force,while the inner radius of 1143 mm is suitable for measuring lateral force.Originality/value-The research findings provide valuable insights for determining optimal strain gauge locations and designing an effective track wheel force measurement system.

Observation about the Classical Electromagnetic Gauge Transformation and Its Quantum Correspondence

Using the Landau and symmetric gauges for the vector potential of a constant magnetic field and the quantum problem of a charged particle moving on a flat surface, we show the classical electromagnetic gauge transformation does not correspond to a one-dimensional unitary group transformation U(1) of the wave function for the quantum case. In addition, with the re-examination of the relation between the magnetic field B and its vector potential A, we found that, in order to have a consistent formulation of the dynamics of the charged particle with both expressions, we must have that B=∇×A if and only if B≠0.

Combination of Tsoft and ET34-ANA-V80 software for the preprocessing and analysis of tide gauge data in French Polynesia

Since 2008 a network of five sea-level monitoring stations was progressively installed in French Polynesia.The stations are autonomous and data,collected at a sampling rate of 1 or 2 min,are not only recorded locally,but also transferred in real time by a radio-link to the NOAA through the GOES satellite.The new ET34-ANA-V80 version of ETERNA,initially developed for Earth Tides analysis,is now able to analyze ocean tides records.Through a two-step validation scheme,we took advantage of the flexibility of this new version,operated in conjunction with the preprocessing facilities of the Tsoft software,to recover co rrected data series able to model sea-level variations after elimination of the ocean tides signal.We performed the tidal analysis of the tide gauge data with the highest possible selectivity(optimal wave grouping)and a maximum of additional terms(shallow water constituents).Our goal was to provide corrected data series and modelled ocean tides signal to compute tide-free sea-level variations as well as tidal prediction models with centimeter precision.We also present in this study the characteristics of the ocean tides in French Polynesia and preliminary results concerning the non-tidal variations of the sea level concerning the tide gauge setting.

余拟群双代数的Gauge变换

在余拟群双代数上利用Gauge变换构造了一个新的余拟群双代数,并且证明了两个余拟群双代数的余表示范畴是张量群等价的.

Silicone oil injection and removal in 27-gauge vitreous surgery

Dear Editor,The advent of 23-gauge(G),25-G,and 27-G vitrectomy systems[1]since the beginning of the 21stcentury has allowed vitrectomy via a smaller incision compared to the 20-G system;hence the name"microincision vitrectomy surgery".Microincision vitrectomy surgery has gainedpopularity among vitreoretinal surgeons.

An Outline of the Grand Unified Theory of Gauge Fields

This paper attempts to propose a grand unified guiding principle of gauge fields from the mathematical and physical picture of fiber bundles: it is believed that our universe may have more fundamental interactions than the four fundamental interactions, and the gauge fields of these fundamental interactions are just a unified gauge potential on the fiber bundle manifold or the components connected to the bottom manifold, that is, our universe;these components can meet the transformation of gauge potential, and even can be transformed from a fundamental interaction gauge potential to another fundamental interaction gauge potential, and can be summarized into a unified equation, namely the expression of the generalized gauge equation, corresponding to the gauge transformation invariance;so gauge transformation invariance is a necessary condition to unify field theory, but quantization of field is not a necessary condition;the four (or more) fundamental interaction fields of the universe are unified into a universal gauge field defined by the connection of the principal fiber bundle on the cosmic base manifold.

Water Gauge Image Denoising Model Based on Improved Adaptive Total Variation

As an important part of water level warning in water conservancy projects,often due to the influence of environmental factors such as light and stains,the acquired water gauge images have sticky,broken and bright spot conditions,which affect the identification of water gauges.To solve this problem,a water gauge image denoising model based on improved adaptive total variation is proposed.Firstly,the regular term exponent in the adaptive total variational equation is changed to an inverse cosine function;secondly,the differential curvature is used to distinguish the image noise points and increase the smoothing strength at the noise points;finally,according to the characteristics of the gradient mode and adaptive gradient threshold after Gaussian filtering,the New model can adaptively denoise in the smooth area and protect the edge area,so as to have the characteristics of both edge-preserving denoising.The experimental results show that the new model has a great improvement in image vision,higher iteration efficiency and an average increase of 1.6 dB in peak signal-to-noise ratio,and an average increase of 9%in structural similarity,which is more beneficial to practical applications.

Integration of Transport and Land Use Planning by Transit-Oriented Development for Economic Sustainability of the Standard Gauge Railway Projects in Tanzania

Tanzania is one of the countries in Africa that has engaged in the projects for construction of the electrified Standard Gauge Railway (SGR). However, lack of integration of transportation and land-use planning threatens economic sustainability of the SGR project. This study was carried out for the purpose of finding-out how transportation can be integrated with land-use planning for economic sustainability of the project. The study was carried-out by using qualitative research approach through demonstration as case study. Findings show that construction of the SGR is not integrated with land-use planning around the stations and along the SGR corridor. It is concluded that economic sustainability of the SGR projects can be achieved by integration of transport and land-use planning. As demonstrated, it is recommended to deliberate for integration of transportation and land-use planning in the SGR projects of which the prime land within Transit Stations can be efficiently used by using Transit Oriented Development and secure more land for production activities around the Transit Stations and along the SGR corridor.

The Significance of Generalized Gauge Transformation across Fundamental Interactions

The author of this paper has put forward a unified program of gauge field from the mathematical and physical picture of the principal associated bundles: thinking that our universe may have more fundamental interactions than the four fundamental interactions, and these basic interaction gauge fields are only the projection components to the base manifold, that is our universe, from a unified gauge potential or connection of the principal associated bundle manifold on the base manifold. These components can satisfy the transformation of gauge potential, and can even be transformed from one basic interaction gauge potential to another basic interaction gauge potential, and can be summarized into a unified equation, that is, the generalized gauge Equation (GGE), but the gauge potential or connection on the principal bundle is invariant, corresponding to the invariance of gauge transformation [1]. In this paper, we will continue to discuss this aspect concretely, and specifically construct a spatiotemporal model with the frame bundle as the principal bundle, and the tensor bundle as the associated bundle, so that the four fundamental interactions, especially the electromagnetic interaction and the gravitational interaction, can be reflected in the bottom manifold, that is, the regional distributions in our universe. Furthermore, this paper studies the existence of gauge transformation across basic interactions by establishing a model of gauge transformation of basic interaction field;it is found that the unified expression formula is GGE and the expression relation on the curvature of space-time. Therefore, the author discusses the feasibility of the generalized gauge transformation across the basic electromagnetic interaction and the basic gravitational interaction, and on this basis, specifically determines a method or way to find the generalized gauge transformation, so as to try to realize the last step of the “unification” of the four fundamental interactions in physics, that is, the “unification” of electromagnetism and gravity.

Challenges of the Performance Standards of the International Finance Corporation in Financing the African Integrated High-Speed Railway Network and the Way Forward: The Case of Standard Gauge Railway in Tanzania

Financing of the African Integrated High-Speed Railway Network (AIHSRN) through Standard Gauge Railway (SGR) Projects is very expensive. As a result, most of the African countries seek financial supports from the International Financial Institutions (IFIs). However, conditions provided by the IFIs through the Performance Standards (PS) of the International Financial Corporation (IFC) increase cost of the projects and thus, it becomes a burden to most of the African countries. This study aimed to explore the causes of IFC-PS through the SGR Projects that escalate costs and how to address them. The Tanzania SGR Lot 1 Project that covered 205 km from Dar es Salaam to Morogoro was selected as a case study. The methods used for data collection involved literature review, focus group discussions and interviews. The results and findings show a gap between the IFC-PS and the National Laws and Regulations that escalates costs of the projects if funds from the IFIs were to be secured. To bridge the gap, it is recommended that the African countries should engage into negotiations with the IFIs to agree to waive IFC-PS conditions that escalate costs provided they are adequately covered in the national laws and regulations;engagement of locally established national and regional financial institutions;and the responsible government institutions in the African countries should sit together for assessment and review of the IFC-PS against the national laws and regulations.

新型25-Gauge与传统20-Gauge玻璃体切除术后干眼对比

目的:对比25-Gauge与20-Gauge玻璃体切除术后患者干眼症状的严重程度。方法:在玻璃体切除手术的患者中,20-Gauge手术26例26眼,25-Gauge手术21例21眼,于手术前及术后3,7及30d,做干眼症状评分、泪液分泌试验、泪膜破裂时间及角膜荧光素钠染色评分比较。结果:与25G手术后患者相比,术后3,7d,20G手术患者干眼症状明显(P<0.05)、泪液分泌量增多(P<0.05)、泪膜破裂时间缩短(P<0.05)、角膜荧光素钠着色明显(P<0.05),上述差异具有统计学意义;术后30d,两组泪液分泌量无统计学差异,其他指标仍具有统计学差异(P<0.05)。结论:25G手术与20G手术相比,对眼表创伤较小,患者术后干眼的情况相对较轻。

再谈“strain gauge”等若干名词术语的译意

为了进一步规范应变片技术的学术名词术语,现把常容易出错的一些学术用语的翻译和释义做一些介绍。并用相应的图示加以进一步说明,以供从事应变片、传感器技术研究及应用人员参考。

Gauge积分在HOL4中的形式化

积分是许多数学理论的基础,如实数分析、信号与系统中微分方程的求解等等。Gauge积分是黎曼积分在闭区间上的推广,应用更加方便。将Gauge积分的运算性质在HOL4(Higher-Order Logic 4)中形式化,包括积分的线性运算性质、积分不等式、分部积分、积分分裂定理、子区间的可积性、对特殊函数的积分的形式化及积分极限定理、柯西可积准则,并根据相关性质对反相积分器进行了验证。

基于FusionWidgets Gauges开发高职院校人才培养工作状态数据仪表盘

提出使用FusionWidgets Gauges仪表盘套件展示高职院校人才培养工作状态数据量化指标的仪表盘方法,给出了实现原理,文末给出实现实例。

关于Gauge积分的注记

在[1]中Armstrong和Lamoreaux定义了一种新型的积分,即Gauge积分和参导数 本文则证明了[1]中一些未证明的结论,并首次提出了Gauge积分的一些性质,对[1]作了一些补充;进一步,本文还系统讨论了Riemann,Lebesgue,Gauge三种积分之间的关系.

Assimilated Tidal Results of Tide Gauge and TOPEX/POSEIDON Data over the China Seas Using a Variational Adjoint Approach with a Nonlinear Numerical Model

In order to obtain an accurate tide description in the China Seas, the 2-dimensional nonlinear numerical Princeton Ocean Model （POM） is employed to incorporate in situ tidal measurements both from tide gauges and TOPEX/POSEIDON （T/P） derived datasets by means of the variational adjoint approach in such a way that unknown internal model parameters, bottom topography, friction coefficients and open boundary conditions, for example, are adjusted during the process. The numerical model is used as a forward model. After the along-track T/P data are processed, two classical methods, i.e. harmonic and response analysis, are implemented to estimate the tide from such datasets with a domain covering the model area extending from 0° to 41°N in latitude and from 99°E to 142°E in longitude. And the results of these two methods are compared and interpreted. The numerical simulation is performed for 16 major constituents. In the data assimilation experiments, three types of unknown parameters （water depth, bottom friction and tidal open boundary conditions in the model equations） are chosen as control variables. Among the various types of data assimilation experiments, the calibration of water depth brings the most promising results. By comparing the results with selected tide gauge data, the average absolute errors are decreased from 7.9 cm to 6.8 cm for amplitude and from 13.0° to 9.0° for phase with respect to the semidiurnal tide M2 constituent, which is the largest tidal constituent in the model area. After the data assimilation experiment is performed, the comparison between model results and tide gauge observation for water levels shows that the RMS errors decrease by 9 cm for a total of 14 stations, mostly selected along the coast of China's Mainland, when a one-month period is considered, and the correlation coefficients improve for most tidal stations among these stations.

Clinical outcomes of 25-gauge vitrectomy surgery for vitreoretinal diseases: comparison of vitrectomy alone and phaco-vitrectomy

AIMTo compare the clinical outcomes of combined 25-gauge pars plana vitrectomy (PPV) and phacoemulsification/posterior chamber intraocular lens (PC-IOL) implantation with vitrectomy alone surgery in patients with various vitreoretinal diseases.METHODSA total of 306 eyes (145 with PPV alone and 161 with phaco-vitrectomy) were enrolled in this retrospective analysis. The surgical approach was 25-gauge PPV combined with phacoemulsification and PC-IOL implantation at the same time in eyes in phaco-vitrectomy group and only PPV in eyes in vitrectomy alone surgery group. The main outcome measures were postoperative clinical outcomes included anterior chamber inflammation, changes in intraocular pressure (IOP) and best corrected visual acuity (BCVA).RESULTSThe most common postoperative complication was anterior chamber reaction which has higher incidence in phaco-vitrectomy group (P<0.001). The mean postoperative 1st day IOP of vitrectomy alone group was significantly lower than that of phaco-vitrectomy group (16.3±5.8 mm Hg vs 17.8±8.1 mm Hg, respectively, P=0.02). Hypotony (IOP≤8 mm Hg) was not different between groups in the postoperative 1st day (P>0.05). The mean preoperative visual acuity was not different between groups (1.6±0.9 logMAR vs 1.8±0.9 logMAR, respectively, P>0.05). However, the mean visual acuity was decreased in vitrectomy alone group at the final visit compared to phaco-vitrectomy group (1.2±0.8 logMAR, 0.9±0.7 logMAR, respectively P<0.05).CONCLUSIONTwenty-five gauge PPV combined with phacoemulsification surgery is a safe and efficient procedure, which can be preferred in phacic patients with a variety of vitreoretinal diseases compared to vitrectomy alone. Despite improved outcomes, this approach is not free of limitations as anterior chamber complications especially with combined surgery.