The effects of roasting, mass ratio of H2SO4 to stone coal, leaching temperature, liquid-to-solid ratio, grinding fineness of stone coal, and two-stage counter-current leaching on the vanadium leaching ratio were stud...The effects of roasting, mass ratio of H2SO4 to stone coal, leaching temperature, liquid-to-solid ratio, grinding fineness of stone coal, and two-stage counter-current leaching on the vanadium leaching ratio were studied. The results show that the vanadium leaching ratio of roasted stone coal through two-stage counter-current leaching can reach 65.1% at the mass ratio of H2SO4 to stone coal of 20%, leaching temperature of 95℃, leaching time of 30 h, liquid-to-solid ratio of 1.1 mL·g^-1, and grinding fineness of 0.1 mm, which can serve as an experimental basis for the production of vanadium from stone coal.展开更多
Coal-based graphene quantum dots(GQDs) were successfully produced via a one-step chemical synthesis from six different coal ranks, from which two superhigh organic sulfur(SHOS) coals were selected as natural S-doped c...Coal-based graphene quantum dots(GQDs) were successfully produced via a one-step chemical synthesis from six different coal ranks, from which two superhigh organic sulfur(SHOS) coals were selected as natural S-doped carbon sources for the preparation of S-doped GQDs. The effects of coal properties on coal-based GQDs were analyzed by means of high-resolution transmission electron microscopy(HRTEM), X-ray diffraction(XRD), Fourier transform infrared(FTIR) spectroscopy, X-ray photoelectron spectroscopy(XPS), ultraviolet-visible(UV-Vis) absorption spectroscopy, and fluorescence emission spectra. It was shown that all coal samples can be used to prepare GQDs, which emit bluegreen and blue fluorescence under ultraviolet light. Anthracite-based GQDs have a hexagonal crystal structure without defects, the largest size, and densely arranged carbon rings in their lamellae; the highrank bituminous coal-based GQDs are relatively reduced in size, with their hexagonal crystal structure being only faintly visible; the low-rank bituminous coal-based GQDs are the smallest, with sparse lattice fringes and visible internal defects. As the metamorphism of raw coals increases, the yield decreases and the fluorescence quantum yield(QY) initially increases and then decreases. Additionally, the surface of GQDs that were prepared using high-rank SHOS coal(high-rank bituminous coal) preserves rich sulfur content even after strong oxidation, which effectively adjusts the bandgap and improves the fluorescence QY. Thus, high-rank bituminous coal with SHOS content can be used as a natural S-doped carbon source to prepare S-doped GQDs, extending the clean utilization of low-grade coal.展开更多
To promote the rational development and use of clean coal resources in China, data on the regional and age distribution of sulfur, arsenic and other harmful elements in Chinese coal was broadly collected, tested for c...To promote the rational development and use of clean coal resources in China, data on the regional and age distribution of sulfur, arsenic and other harmful elements in Chinese coal was broadly collected, tested for content, and analyzed. Coal in northwestern China is characterized by low to extremely low levels of sulfur; the coal of the Taiyuan Formation in northern China mainly has high-sulfur content; that of the Shanxi Formation is mainly characterized by low sulfur coal; and the Late Permian coal in southern China has overall higher sulfur content; other regions have low sulfur coal. The average content of harmful trace elements in the bulk of China's coal is similar to the corresponding content in the coal of the North America and the rest of the world, whereas the content of various elements (Hg, Sb and Se) is different in magnitude to the corresponding percentage in the crust. The average content of the elements Cr, Se, Co, Be, U, Br in Late Permian coal in S China ranks first in the country whereas the average content of Hg and CI in the coals of Late Carboniferous to Early Permian age in N China are the highest. The average content of Mn in Early and Middle Jurassic coal is higher in NW China. The high content of harmful elements in some coal should cause particular concern both in the development and utilization of coal.展开更多
The utilization of high-sulfur coal is becoming more urgent due to the excessive utilization of low-sulfur,high-quality coal resources,and sulfur removal from high-sulfur coal is the most important issue.This paper re...The utilization of high-sulfur coal is becoming more urgent due to the excessive utilization of low-sulfur,high-quality coal resources,and sulfur removal from high-sulfur coal is the most important issue.This paper reviews the speciation,forms and distribution of sulfur in coal,the sulfur removal from raw coal,the thermal transformation of sulfur during coal pyrolysis,and the sulfur regulation during coal-blending coking of high organic-sulfur coals.It was suggested that the proper characterization of sulfur in coal cannot be obtained only by either chemical method or instrumental characterization,which raises the need of a combination of current or newly adopted characterization methods.Different from the removal of inorganic sulfur from coal,the organic sulfur can only be partly removed by chemical technologies;and the coal structure and property,particularly high-sulfur coking coals which have caking ability,may be altered and affected by the pretreatment processes.Based on the interactions among the sulfur radicals,sulfur-containing and hydrogen-containing fragments during coal pyrolysis and the reactions with minerals or nascent char,regulating the sulfur transformation behavior in the process of thermal conversion is the most effective way to utilize high organic-sulfur coals in the coke-making industry.An in-situ regulation approach of sulfur transformation during coal-blending coking has been suggested.That is,the high volatile coals with an appropriate releasing temperature range of CH4 overlapping well with that of H2 S from high organic-sulfur coals is blended with high organic-sulfur coals,and the C–S/C–C bonds in some sulfur forms are catalytically broken and immediately hydrogenated by the hydrogencontaining radicals generated from high volatile coals.Wherein,the effect of mass transfer on sulfur regulation during the coking process should be considered for the larger-scale coking tests through optimizing the ratios of different coals in the coal blend.展开更多
The determined results of the sulfur contents and isotopic composition of coal samples from major coal mines in 15 provinces and regions of China show that the coal mined in the north of China is characterized by high...The determined results of the sulfur contents and isotopic composition of coal samples from major coal mines in 15 provinces and regions of China show that the coal mined in the north of China is characterized by higher ^34S and lower sulfur content, but that in the south of China has lower ^34S and higher sulfur content.During the coal-burning process in both indrstrial and daily use of coal as fuel the released sulfur dioxide is always enriched in lighter sulfur isotope relative to the corresponding coal;the particles are always enriched in heavier sulfur isotope.The discussion on the environmental geochemical significance of the above-mentioned results also has been made.展开更多
This work explores the use of carbon dioxide,water,and their mixtures as solvent for the precombustion beneficiation of raw coal without using any toxic mineral acids in the temperature range of 200-400℃.The fluid po...This work explores the use of carbon dioxide,water,and their mixtures as solvent for the precombustion beneficiation of raw coal without using any toxic mineral acids in the temperature range of 200-400℃.The fluid polarity,ionic constant,and supercritical point can be adjusted by H_(2)O/CO_(2)ratio and temperature.Adding carbon dioxide to hydrothermal fluid also increases the ionization by forming carbonic acid.Extractions with supercritical fluids have several benefits including enhanced mass transport,ease of separation and recycle,wide range of extractive capability and tunability,better inherent safety,and in the case of carbon dioxide and water-low cost.A semi-continuous extraction system was designed and built in which pressure,temperature and the relative flow rates of CO_(2)and H_(2)O can be controlled.Coal powder is kept in a packed bed and the extraction is carried out at 143 bar pressure.Using sulfur as a model heteroatom,extractive efficiency is examined as a function of the temperature,fluid composition,fluid flow,and extraction time.The results indicate that carbon dioxide,water,and supercritical water-carbon dioxide(ScWC)all can effectively extract about 50%of total sulfur from bituminous coal in 1 h.Extraction above 350℃decreased effectiveness,and extraction above the supercritical point of pure water caused hydrothermal carbonization.ScWC extraction may provide necessary control to prevent organic dissolution while removing sulfur.展开更多
The changes in sulfur form in coal were analyzed by sulfur K-XANES(K-edge X-ray absorption near edge structures) spectra before and after the coal microwave desulfurization in a Na OH solution. After the desulfurizati...The changes in sulfur form in coal were analyzed by sulfur K-XANES(K-edge X-ray absorption near edge structures) spectra before and after the coal microwave desulfurization in a Na OH solution. After the desulfurization, the pyritic sulfur content of coal decreased significantly from 53.6% to 39.2%, while the sulfate sulfur content increased from 17.3% to 34.6%. Only a small amount of thiophene sulfur(20.1–16.1%) was removed. Some sulfur-containing components were oxidized to sulfate sulfur. Under the optimum conditions, the ash content decreased, while the volatile content increased. The calorific value of coal slightly decreased with a slight variation in the amplitudes. The overall structure of coal did not change significantly based on Fourier transform infrared(FTIR) spectral analyses. Thus, the desulfurization of coal with microwave irradiation in a Na OH solution did not significantly change the properties of coal.展开更多
Sulfur is one of the hazardous elements in coal. The concentrations of sulfur are relatively high in coal. The major forms of sulfur in coal are pyritic, organic and sulfate. Pyritic and organic sulfur generally accou...Sulfur is one of the hazardous elements in coal. The concentrations of sulfur are relatively high in coal. The major forms of sulfur in coal are pyritic, organic and sulfate. Pyritic and organic sulfur generally account for the bulk of sulfur in coal. Elemental sulfur also occurs in coal, but only in trace to minor amounts. When coals are burned, leached and washed, sulfur will be released in the form of sulfide and H\-2S, which then react with O\-2, water and other substances to change into vitriol, and in some places it may form acid rain. And they will impact water environment, acidify the soil and do great harm to plants and human health. In this paper, on the basis of the data from the Yanzhou mining district, the distribution and concentrations of sulfur are analyzed and the existing forms of sulfur are studied. The variation of sulfur and its impact on the environments also are described when coal is used.展开更多
Contents of the rare-earth elements (REE) in two coal seams from North Shanxi Province, China, were determined using the instrumental neutron activation method. Based on the REE distribution patterns, and correlation ...Contents of the rare-earth elements (REE) in two coal seams from North Shanxi Province, China, were determined using the instrumental neutron activation method. Based on the REE distribution patterns, and correlation analysis and cluster analysis, the main conclusions were drawn as follows. The REE contents are controlled mainly by the coal-forming environments, but might be affected by acidic solution leaching after peat sedimentation. The REE distribution patterns should be nearly the same in the sublayers of the same coal seam, and the occurrence of abnormal patterns might indicate the geological effect during post-sedimentation. The REE in coals are present mainly in the inorganic phase, and might be derived mainly from terrigenous detrital minerals. Some harmful elements, such as V, P, Mo, Cr, Cu, Mo, Th and Cd, might have cleaning potential during processing and dressing by washing because they are associated with REE.展开更多
Influence of factors such as potential of electrolyte, electrolyzing time, concentration of electrolyte, and pH value on flotation and desulfurization of coal was researched. The result shows that the electrochemical ...Influence of factors such as potential of electrolyte, electrolyzing time, concentration of electrolyte, and pH value on flotation and desulfurization of coal was researched. The result shows that the electrochemical reduction can enhance the desulfurization effect and increase the yield of clean coal under certain conditions. So it is an effective method.展开更多
Super-high sulfur coal resultes in serious coal-derived pollution but might have a particular genesis. Thus,a columnar section of an Early Permian Liangshan Formation coal seam. weight average sulfur content 5.80%,fro...Super-high sulfur coal resultes in serious coal-derived pollution but might have a particular genesis. Thus,a columnar section of an Early Permian Liangshan Formation coal seam. weight average sulfur content 5.80%,from Kaili,eastern Guizhou,was studied using the methods of coal petrology and geochemistry. The results show that the seam was apparently formed in seawater-effected peat bogs that developed in two distinct stages. During the first stage various layers were formed in a supratidal bog and have a composition characteristic of a bog with a gradually decreasing sea-water effect,decreasing water dynamics,and an increasingly reductive environment. Layers in the upper seam formed during a second stage in an intertidal bog. These layers are very high in total and inorganic sulfur,the ratios of or-ganic/inorganic sulfur and V/I drop,they are high in coal ash yield and have a high ash component index,considerable barkinite,oxidized and detrital macerals,have a porphyroclatic micro-structure and are rich in pyrite,all of which indi-cate the coal-forming environment had higher oxidation potential,strong and roiling water dynamics,and intermittent exposure to a sulfur rich environment.展开更多
The Permian coal in southwest China contains highest sulfur among the Chinese coal .Compositional variations of sumir in coal are mainly controlled by palaogeographital environmentsduring peat accumulation. High organ...The Permian coal in southwest China contains highest sulfur among the Chinese coal .Compositional variations of sumir in coal are mainly controlled by palaogeographital environmentsduring peat accumulation. High organic sulfur coal is formed in peat swamp developing in tidal flat of limited carbonate platform, and it is provided with especial petrologital and geochemical characteristics, and its organoschr-containing compounds are mainly thiophene series. The macroscopitaland microscopical shapes or types of pyrites in Late Permisn coal are diversined. Bituminous coal and anthracite are diamagnetic, but the pyrites are paramagnetic. The magnetic susceptibility oftbe pyrites is depended on the content of paramagnatic elements associnted with pyrites.展开更多
The reverse flocculation method for removing pyritic sulfur from high sulfor coals has been conceptually beveloped and investigated. The tentative tests on China high sulfur coals have shown that this advanced physica...The reverse flocculation method for removing pyritic sulfur from high sulfor coals has been conceptually beveloped and investigated. The tentative tests on China high sulfur coals have shown that this advanced physical separation techaique can be very efficient in coal desulfurization, provided the process parameters are properly optimized. Under the circumsances of acquiring high coal recovery, the total sulfur rejection with four kinds of coal samples normally falls in tbe range 57% to 71 % by one-step reverse flocculation, and within the range 40% to 59% by one-step normal flocculation process.展开更多
As special cylindrical briquettes of coal for long distance pipeline transportation and directly cleaned combustion the cleaned coal logs should possess two characteristics of transportation in pipeline and cleaned co...As special cylindrical briquettes of coal for long distance pipeline transportation and directly cleaned combustion the cleaned coal logs should possess two characteristics of transportation in pipeline and cleaned combustion. In order to make cleaned coal logs a rational technology for manufacturing, cleaned coal logs was designed and compound sulfur fixing binders with high effects of binding and sulfur-fixing was selected and combined. In addition, by means of characteristic experiments of strength, wear, waterproof and sulfur-fixing five different cleaned coal logs made with different compound sulfur fixing binders in different compaction conditions was tested and measured. Experimental results indicated that the manufacturing technology of cleaned coal logs was reasonable and the combination of compound sulfur fixing binders was scientific. Cleaned coal logs made up with the fourth group of coal mixture had high strength, good waterproof property, efficient sulfur-fixing, good characteristic of transportion, and achieved the performance requirement for pipeline transportation and sulfur fixing.展开更多
On the basis of the study on the occurrence and distribution of sulfur in the Late Permiau high-sulrur coals of Sichuan .Southwest China,the paper discusses the geological ractors influencing sulfur occurrence in coal...On the basis of the study on the occurrence and distribution of sulfur in the Late Permiau high-sulrur coals of Sichuan .Southwest China,the paper discusses the geological ractors influencing sulfur occurrence in coals, and suggests two evolutionary motlels, i. e. a directly depositional pyrite series(euhedral crystal→aggregate→glomerocryst ) and complex genetic series (mini→granular, framboid→spherical→nodular,lumpy pyrite). They are of theoretically and actually important significance not only in the explanation to the difference in composition of varioas types of coal pyrites,but also in the understanding of the mechanism of physical properties (magnetic,surface property) of pyrites. By a comprehansive analysis,a genetic model of sulfur in the Late Permian coal of Sichuan has been established.展开更多
A new technology for recycling EAF dust and removal of sulfur from coking oven gas was investigated. The new technology does not need to set up special equipment to treat COG (coke oven gas), and it is only acquired b...A new technology for recycling EAF dust and removal of sulfur from coking oven gas was investigated. The new technology does not need to set up special equipment to treat COG (coke oven gas), and it is only acquired by mixing the ZnO base additive into the coke coal. In the stage of pyrolysis of the coal volatile, ZnO of the additive combines with H 2S, CS 2, COS and C 2H 2SH of coal gas, forming ZnS in coal char. In the stage of coking of the coal char, Zn is gasified with S, then the gas Zn react with H 2S, CS 2, COS and C 2H 2SH, forming ZnS in coal gas and depositing as dust. After the collected ZnS dust was regenerated, it can be recycling as the additive again. The sulfur in coal gas can be completely removed if the mole ratio of the added Zn to the volatilized S is more than 1, and the sulfur in coke is also slightly decreased comparing with the coke without the additive. The EAF dust containing ZnO and Fe 2O 3 can be the base material of the desulfurizing additive.展开更多
The mechanisms of sulfur capturing during coal briquette combustion was discussed. Various factors affecting sulfur removal efficiency have been studied. Characterization of the slag left after combustion has been ca...The mechanisms of sulfur capturing during coal briquette combustion was discussed. Various factors affecting sulfur removal efficiency have been studied. Characterization of the slag left after combustion has been carried out by using X ray diffraction (XRD), Messbauer spectroscopy (MS), scanning electron microscopy (SEM), energy dispersion X ray analysis (EDAX), and electron spectroscopy for chemical analysis (ESCA). No other sulfur containing species besides CaSO 4 was found. Small amount of CaFe 3(SiO 4) 2OH, some complexes of CaO SiO 2 Fe 2O 3 and vitreous iron oxides were identified on the surface of CaSO 4 grains. This might explain the mechanism of sulfur fixation during coal briquettes combustion.展开更多
基金supported by the Science Foundation of Central South University (No. 76112037)the Postdoctoral Science Foundation of Central South University.
文摘The effects of roasting, mass ratio of H2SO4 to stone coal, leaching temperature, liquid-to-solid ratio, grinding fineness of stone coal, and two-stage counter-current leaching on the vanadium leaching ratio were studied. The results show that the vanadium leaching ratio of roasted stone coal through two-stage counter-current leaching can reach 65.1% at the mass ratio of H2SO4 to stone coal of 20%, leaching temperature of 95℃, leaching time of 30 h, liquid-to-solid ratio of 1.1 mL·g^-1, and grinding fineness of 0.1 mm, which can serve as an experimental basis for the production of vanadium from stone coal.
基金supported by the National Natural Science Foundation of China (grant No. 41172146)National Key Basic Research Program of China (grant No. 2014CB238905)
文摘Coal-based graphene quantum dots(GQDs) were successfully produced via a one-step chemical synthesis from six different coal ranks, from which two superhigh organic sulfur(SHOS) coals were selected as natural S-doped carbon sources for the preparation of S-doped GQDs. The effects of coal properties on coal-based GQDs were analyzed by means of high-resolution transmission electron microscopy(HRTEM), X-ray diffraction(XRD), Fourier transform infrared(FTIR) spectroscopy, X-ray photoelectron spectroscopy(XPS), ultraviolet-visible(UV-Vis) absorption spectroscopy, and fluorescence emission spectra. It was shown that all coal samples can be used to prepare GQDs, which emit bluegreen and blue fluorescence under ultraviolet light. Anthracite-based GQDs have a hexagonal crystal structure without defects, the largest size, and densely arranged carbon rings in their lamellae; the highrank bituminous coal-based GQDs are relatively reduced in size, with their hexagonal crystal structure being only faintly visible; the low-rank bituminous coal-based GQDs are the smallest, with sparse lattice fringes and visible internal defects. As the metamorphism of raw coals increases, the yield decreases and the fluorescence quantum yield(QY) initially increases and then decreases. Additionally, the surface of GQDs that were prepared using high-rank SHOS coal(high-rank bituminous coal) preserves rich sulfur content even after strong oxidation, which effectively adjusts the bandgap and improves the fluorescence QY. Thus, high-rank bituminous coal with SHOS content can be used as a natural S-doped carbon source to prepare S-doped GQDs, extending the clean utilization of low-grade coal.
文摘To promote the rational development and use of clean coal resources in China, data on the regional and age distribution of sulfur, arsenic and other harmful elements in Chinese coal was broadly collected, tested for content, and analyzed. Coal in northwestern China is characterized by low to extremely low levels of sulfur; the coal of the Taiyuan Formation in northern China mainly has high-sulfur content; that of the Shanxi Formation is mainly characterized by low sulfur coal; and the Late Permian coal in southern China has overall higher sulfur content; other regions have low sulfur coal. The average content of harmful trace elements in the bulk of China's coal is similar to the corresponding content in the coal of the North America and the rest of the world, whereas the content of various elements (Hg, Sb and Se) is different in magnitude to the corresponding percentage in the crust. The average content of the elements Cr, Se, Co, Be, U, Br in Late Permian coal in S China ranks first in the country whereas the average content of Hg and CI in the coals of Late Carboniferous to Early Permian age in N China are the highest. The average content of Mn in Early and Middle Jurassic coal is higher in NW China. The high content of harmful elements in some coal should cause particular concern both in the development and utilization of coal.
基金financial support of National Natural Science Foundation of China(U1910201,21878208)Transformation of Scientific and Technological Achievements Programs of Higher Education Institutions in Shanxi(TSTAP)Shanxi Province Science Foundation for Key Program(201901D111001(ZD))。
文摘The utilization of high-sulfur coal is becoming more urgent due to the excessive utilization of low-sulfur,high-quality coal resources,and sulfur removal from high-sulfur coal is the most important issue.This paper reviews the speciation,forms and distribution of sulfur in coal,the sulfur removal from raw coal,the thermal transformation of sulfur during coal pyrolysis,and the sulfur regulation during coal-blending coking of high organic-sulfur coals.It was suggested that the proper characterization of sulfur in coal cannot be obtained only by either chemical method or instrumental characterization,which raises the need of a combination of current or newly adopted characterization methods.Different from the removal of inorganic sulfur from coal,the organic sulfur can only be partly removed by chemical technologies;and the coal structure and property,particularly high-sulfur coking coals which have caking ability,may be altered and affected by the pretreatment processes.Based on the interactions among the sulfur radicals,sulfur-containing and hydrogen-containing fragments during coal pyrolysis and the reactions with minerals or nascent char,regulating the sulfur transformation behavior in the process of thermal conversion is the most effective way to utilize high organic-sulfur coals in the coke-making industry.An in-situ regulation approach of sulfur transformation during coal-blending coking has been suggested.That is,the high volatile coals with an appropriate releasing temperature range of CH4 overlapping well with that of H2 S from high organic-sulfur coals is blended with high organic-sulfur coals,and the C–S/C–C bonds in some sulfur forms are catalytically broken and immediately hydrogenated by the hydrogencontaining radicals generated from high volatile coals.Wherein,the effect of mass transfer on sulfur regulation during the coking process should be considered for the larger-scale coking tests through optimizing the ratios of different coals in the coal blend.
文摘The determined results of the sulfur contents and isotopic composition of coal samples from major coal mines in 15 provinces and regions of China show that the coal mined in the north of China is characterized by higher ^34S and lower sulfur content, but that in the south of China has lower ^34S and higher sulfur content.During the coal-burning process in both indrstrial and daily use of coal as fuel the released sulfur dioxide is always enriched in lighter sulfur isotope relative to the corresponding coal;the particles are always enriched in heavier sulfur isotope.The discussion on the environmental geochemical significance of the above-mentioned results also has been made.
基金the Office of Fossil Energy,U.S.Department of Energy via Leonardo Technologies,Inc.,subcontract LTI-F80022594-VCU.
文摘This work explores the use of carbon dioxide,water,and their mixtures as solvent for the precombustion beneficiation of raw coal without using any toxic mineral acids in the temperature range of 200-400℃.The fluid polarity,ionic constant,and supercritical point can be adjusted by H_(2)O/CO_(2)ratio and temperature.Adding carbon dioxide to hydrothermal fluid also increases the ionization by forming carbonic acid.Extractions with supercritical fluids have several benefits including enhanced mass transport,ease of separation and recycle,wide range of extractive capability and tunability,better inherent safety,and in the case of carbon dioxide and water-low cost.A semi-continuous extraction system was designed and built in which pressure,temperature and the relative flow rates of CO_(2)and H_(2)O can be controlled.Coal powder is kept in a packed bed and the extraction is carried out at 143 bar pressure.Using sulfur as a model heteroatom,extractive efficiency is examined as a function of the temperature,fluid composition,fluid flow,and extraction time.The results indicate that carbon dioxide,water,and supercritical water-carbon dioxide(ScWC)all can effectively extract about 50%of total sulfur from bituminous coal in 1 h.Extraction above 350℃decreased effectiveness,and extraction above the supercritical point of pure water caused hydrothermal carbonization.ScWC extraction may provide necessary control to prevent organic dissolution while removing sulfur.
基金provided by the National Natural Science Foundation of China(No.51274199)the Specialized Research Fund for the Doctoral Program of Higher Education(No.20130095110008)
文摘The changes in sulfur form in coal were analyzed by sulfur K-XANES(K-edge X-ray absorption near edge structures) spectra before and after the coal microwave desulfurization in a Na OH solution. After the desulfurization, the pyritic sulfur content of coal decreased significantly from 53.6% to 39.2%, while the sulfate sulfur content increased from 17.3% to 34.6%. Only a small amount of thiophene sulfur(20.1–16.1%) was removed. Some sulfur-containing components were oxidized to sulfate sulfur. Under the optimum conditions, the ash content decreased, while the volatile content increased. The calorific value of coal slightly decreased with a slight variation in the amplitudes. The overall structure of coal did not change significantly based on Fourier transform infrared(FTIR) spectral analyses. Thus, the desulfurization of coal with microwave irradiation in a Na OH solution did not significantly change the properties of coal.
文摘Sulfur is one of the hazardous elements in coal. The concentrations of sulfur are relatively high in coal. The major forms of sulfur in coal are pyritic, organic and sulfate. Pyritic and organic sulfur generally account for the bulk of sulfur in coal. Elemental sulfur also occurs in coal, but only in trace to minor amounts. When coals are burned, leached and washed, sulfur will be released in the form of sulfide and H\-2S, which then react with O\-2, water and other substances to change into vitriol, and in some places it may form acid rain. And they will impact water environment, acidify the soil and do great harm to plants and human health. In this paper, on the basis of the data from the Yanzhou mining district, the distribution and concentrations of sulfur are analyzed and the existing forms of sulfur are studied. The variation of sulfur and its impact on the environments also are described when coal is used.
文摘Contents of the rare-earth elements (REE) in two coal seams from North Shanxi Province, China, were determined using the instrumental neutron activation method. Based on the REE distribution patterns, and correlation analysis and cluster analysis, the main conclusions were drawn as follows. The REE contents are controlled mainly by the coal-forming environments, but might be affected by acidic solution leaching after peat sedimentation. The REE distribution patterns should be nearly the same in the sublayers of the same coal seam, and the occurrence of abnormal patterns might indicate the geological effect during post-sedimentation. The REE in coals are present mainly in the inorganic phase, and might be derived mainly from terrigenous detrital minerals. Some harmful elements, such as V, P, Mo, Cr, Cu, Mo, Th and Cd, might have cleaning potential during processing and dressing by washing because they are associated with REE.
基金The National Natural Science F oundation of China ( 5 0 1740 5 4)
文摘Influence of factors such as potential of electrolyte, electrolyzing time, concentration of electrolyte, and pH value on flotation and desulfurization of coal was researched. The result shows that the electrochemical reduction can enhance the desulfurization effect and increase the yield of clean coal under certain conditions. So it is an effective method.
基金Projects 40572095 supported by NSFC and 20060290503 by China Ministry of Education
文摘Super-high sulfur coal resultes in serious coal-derived pollution but might have a particular genesis. Thus,a columnar section of an Early Permian Liangshan Formation coal seam. weight average sulfur content 5.80%,from Kaili,eastern Guizhou,was studied using the methods of coal petrology and geochemistry. The results show that the seam was apparently formed in seawater-effected peat bogs that developed in two distinct stages. During the first stage various layers were formed in a supratidal bog and have a composition characteristic of a bog with a gradually decreasing sea-water effect,decreasing water dynamics,and an increasingly reductive environment. Layers in the upper seam formed during a second stage in an intertidal bog. These layers are very high in total and inorganic sulfur,the ratios of or-ganic/inorganic sulfur and V/I drop,they are high in coal ash yield and have a high ash component index,considerable barkinite,oxidized and detrital macerals,have a porphyroclatic micro-structure and are rich in pyrite,all of which indi-cate the coal-forming environment had higher oxidation potential,strong and roiling water dynamics,and intermittent exposure to a sulfur rich environment.
文摘The Permian coal in southwest China contains highest sulfur among the Chinese coal .Compositional variations of sumir in coal are mainly controlled by palaogeographital environmentsduring peat accumulation. High organic sulfur coal is formed in peat swamp developing in tidal flat of limited carbonate platform, and it is provided with especial petrologital and geochemical characteristics, and its organoschr-containing compounds are mainly thiophene series. The macroscopitaland microscopical shapes or types of pyrites in Late Permisn coal are diversined. Bituminous coal and anthracite are diamagnetic, but the pyrites are paramagnetic. The magnetic susceptibility oftbe pyrites is depended on the content of paramagnatic elements associnted with pyrites.
文摘The reverse flocculation method for removing pyritic sulfur from high sulfor coals has been conceptually beveloped and investigated. The tentative tests on China high sulfur coals have shown that this advanced physical separation techaique can be very efficient in coal desulfurization, provided the process parameters are properly optimized. Under the circumsances of acquiring high coal recovery, the total sulfur rejection with four kinds of coal samples normally falls in tbe range 57% to 71 % by one-step reverse flocculation, and within the range 40% to 59% by one-step normal flocculation process.
基金Supported by the National Natural Science Foundation of China (50364003)
文摘As special cylindrical briquettes of coal for long distance pipeline transportation and directly cleaned combustion the cleaned coal logs should possess two characteristics of transportation in pipeline and cleaned combustion. In order to make cleaned coal logs a rational technology for manufacturing, cleaned coal logs was designed and compound sulfur fixing binders with high effects of binding and sulfur-fixing was selected and combined. In addition, by means of characteristic experiments of strength, wear, waterproof and sulfur-fixing five different cleaned coal logs made with different compound sulfur fixing binders in different compaction conditions was tested and measured. Experimental results indicated that the manufacturing technology of cleaned coal logs was reasonable and the combination of compound sulfur fixing binders was scientific. Cleaned coal logs made up with the fourth group of coal mixture had high strength, good waterproof property, efficient sulfur-fixing, good characteristic of transportion, and achieved the performance requirement for pipeline transportation and sulfur fixing.
文摘On the basis of the study on the occurrence and distribution of sulfur in the Late Permiau high-sulrur coals of Sichuan .Southwest China,the paper discusses the geological ractors influencing sulfur occurrence in coals, and suggests two evolutionary motlels, i. e. a directly depositional pyrite series(euhedral crystal→aggregate→glomerocryst ) and complex genetic series (mini→granular, framboid→spherical→nodular,lumpy pyrite). They are of theoretically and actually important significance not only in the explanation to the difference in composition of varioas types of coal pyrites,but also in the understanding of the mechanism of physical properties (magnetic,surface property) of pyrites. By a comprehansive analysis,a genetic model of sulfur in the Late Permian coal of Sichuan has been established.
文摘A new technology for recycling EAF dust and removal of sulfur from coking oven gas was investigated. The new technology does not need to set up special equipment to treat COG (coke oven gas), and it is only acquired by mixing the ZnO base additive into the coke coal. In the stage of pyrolysis of the coal volatile, ZnO of the additive combines with H 2S, CS 2, COS and C 2H 2SH of coal gas, forming ZnS in coal char. In the stage of coking of the coal char, Zn is gasified with S, then the gas Zn react with H 2S, CS 2, COS and C 2H 2SH, forming ZnS in coal gas and depositing as dust. After the collected ZnS dust was regenerated, it can be recycling as the additive again. The sulfur in coal gas can be completely removed if the mole ratio of the added Zn to the volatilized S is more than 1, and the sulfur in coke is also slightly decreased comparing with the coke without the additive. The EAF dust containing ZnO and Fe 2O 3 can be the base material of the desulfurizing additive.
文摘The mechanisms of sulfur capturing during coal briquette combustion was discussed. Various factors affecting sulfur removal efficiency have been studied. Characterization of the slag left after combustion has been carried out by using X ray diffraction (XRD), Messbauer spectroscopy (MS), scanning electron microscopy (SEM), energy dispersion X ray analysis (EDAX), and electron spectroscopy for chemical analysis (ESCA). No other sulfur containing species besides CaSO 4 was found. Small amount of CaFe 3(SiO 4) 2OH, some complexes of CaO SiO 2 Fe 2O 3 and vitreous iron oxides were identified on the surface of CaSO 4 grains. This might explain the mechanism of sulfur fixation during coal briquettes combustion.