Co_(3)O_(4)as an efficient passive NO_(x) adsorber for emission control during cold-start of diesel engines

The Co_(3)O_(4)nanoparticles,dominated by a catalytically active(110)lattice plane,were synthesized as a low-temperature NO_(x) adsorbent to control the cold start emissions from vehicles.These nanoparticles boast a substantial quantity of active chemisorbed oxygen and lattice oxygen,which exhibited a NO_(x) uptake capacity commensurate with Pd/SSZ-13 at 100℃.The primary NO_(x) release temperature falls within a temperature range of 200-350℃,making it perfectly suitable for diesel engines.The characterization results demonstrate that chemisorbed oxygen facilitate nitro/nitrites intermediates formation,contributing to the NO_(x) storage at 100℃,while the nitrites begin to decompose within the 150-200℃range.Fortunately,lattice oxygen likely becomes involved in the activation of nitrites into more stable nitrate within this particular temperature range.The concurrent processes of nitrites decomposition and its conversion to nitrates results in a minimal NO_(x) release between the temperatures of 150-200℃.The nitrate formed via lattice oxygen mainly induces the NO_(x) to be released as NO_(2) within a temperature range of 200-350℃,which is advantageous in enhancing the NO_(x) activity of downstream NH_(3)-SCR catalysts,by boosting the fast SCR reaction pathway.Thanks to its low cost,considerable NO_(x) absorption capacity,and optimal release temperature,Co_(3)O_(4)demonstrates potential as an effective material for passive NO_(x) adsorber applications.

Assessment of the crucial factors influencing the responses of ammonia and nitrous oxide emissions to controlled release nitrogen fertilizer: A meta-analysis

Reducing ammonia(NH3) and nitrous oxide(N2O) emissions have great effects on mitigating nitrogen(N) nutrient loss and greenhouse gas emissions. Controlled release urea(CRU) can control the N release rate, which reduces reactive N loss and increases nitrogen use efficiency relative to conventional urea(CU). However, the crucial factors influencing the responses of NH3and N2O emissions to CRU relative to CU are still unclear. In this study, we evaluated the responses of NH3and N2O emissions to CRU based on collected field data with a meta-analysis. CRU reduced the NH3and N2O emissions by 32.7 and 25.0% compared with CU, respectively. According to subgroup analysis, CRU presented better mitigation of NH3and N2O emissions in soils with pH 6.5–7.5(–47.9 and –23.7%) relative to either pH<6.5(–28.5and –21.4%) or pH>7.5(–29.3 and –17.3%), and in the rice season(–34.8 and –29.1%) relative to the wheat season(–19.8 and –22.8%). The responses of NH3and N2O emissions to CRU increased from rainfed(–30.5 and –17.0%) to irrigated(–32.5 and –22.9%), and then to paddy(–34.8 and –29.1%) systems. In addition, the response of N2O emission mitigation increased with increases in soil total nitrogen(TN);however, soil TN did not significantly affect the response of NH3volatilization. The reduction in NH3emission was greater in sandy-textured soil(–57.7%) relative to loam-textured(–32.9%) and clay-textured(–32.3%) soils, whereas soil texture did not affect N2O emission. Overall, CRU was a good option for reducing the NH3and N2O emissions relative to CU in agricultural production. This analysis improves our understanding of the crucial environmental and management factors influencing the mitigation of NH3and N2O emissions under CRU application, and these site-specific factors should be considered when applying CRU to reduce reactive N loss and increase NUE.

Effects of Application of Controlled Release Nitrogen Fertilizer on N_2O Emission in Slope Cultivated Land with Purple Soil

In order to study effects of application of contmllE=d release fertilizer on ni- trous oxide （N2O） emission in slope cultivated land with purple soil, four treatments including the control group （CK）, urea （UR）, controlled release nitrogen fertilizer （CR）, and controlled release nitrogen fertilizer＋urea （25%CR, 75%UR） were set up, and their impacts on maize yield, surface runoff and nitrogen loss in the growth pe- riod of maize and N2O emission were studied. The results show that maize yield, surface runoff, nitrogen loss from subsurface flow, and N2O emission in the control group was far lower than that in the fertilization treatments, revealing that fertilization was the main reason for nitrogen loss and N2O emission. Among the four treat- ments, nitrogen loss from subsurface flow in the treatment CR was the highest, up to 31.7 kg/hm^2, but N2O emission was 0.35 kg/hm^2, which was 37% less than that in the treatment UR. Nitrogen loss from subsurface flow in the treatment 25% CR was the lowest, only 20.9 kg/hm^2, and N2O emission was 15% less than that in the treatment UR. Nitrogen was slowly released from controlled release nitrogen fertilizer in the growth period, and controlled release nitrogen fertilizer could reduce N2O emis- .sion from slope cultivated land due to low content of soil inorganic nitrogen, but it could increase the nitrogen loss from subsurface flow. Therefore, the combination of controlled release fertilizer and urea can not only reduce N2O emission but also de- crease nitrogen loss from subsurface flow.

China's Total Emission Control Policy:a Critical Review

As part of a comprehensive environmental management system, many countries establish emission control targets for mass emissions of a pollutant. Such targets are often the key objective of an environmental policy, such as an emission trading program. In China, however, it is more than just an objective of one particular policy; it has become a concept that has influenced many national environmental policies and activities. The objective of this article is to review the implementation of the total emission control policy in the past 10 years and explore emerging issues in its implementation. The article has three sections: a summary of the implementation experience, issues with the design and implementation of the policy, and policy recommendations.

Novel Oxygen Storage Components Promoted Palladium Catalysts for Emission Control in Natural Gas Powered Engines

A three-way catalyst comprised novel oxygen storage components for emission control in natural gas powered engines was prepared. The addition of novel oxygen storage components to the Pd/γ-Al2O3 catalysts resulted in improved activities of the fresh and aged catalyst by lowering the light-off temperature for methane in natural gas engines exhaust.

CONTROL OF GAS EMISSION AT COAL FACE IN CHINA

All the underground coal mines in China are gassy mines. The gas emission at coal face increasingly grows with the increase of working depth and coal output, for example, the gas emission at a full mechanized coal face of mine No. 2 at Yongquan with a daily output of 2. 000t/d is up to 66-72m2/min. Special gas emission phenomena such as gas blowout, gas and coal outburst etc. have occurred at some faces, which threatens the safe production of face. obstructs the growth of productivity and limits the full play of mechanized equipment.In this paper, gas at face is divided, according to its origin, into three constituents, namely , coming from the coal wall, mined coal and goaf;and a formula for calculation is given. Also , the characteristics of the variation of gas emission at coal face, and the influence of mining sequence of a group of seams and supplied air quantity on the gas emission are discussed. Furthermore . based on the regularity of gas emission at coal face from the above three sources, and on the experiences of years, three principles on controlling gas emission at coal face are presented, that are managing the gas on classification basis, harnessing each source separately and comprehensive prevention and control. Finally, technical measures for prevention and treatment of the accumulation of gas in the upper corner of face, at the working place of coal-winning machine and in the bottom trough of conveyor are introduced.

Reducing Greenhouse Gas Emission from the Neodymium Oxide Electrolysis. Part II: Basics of a Process Control Avoiding PFC Emission

The neodymium electrolysis produces unnecessary high emission of CF4 and C2F6. These perfluorocarbons (PFCs) are potent greenhouse gases and are not filtered or destroyed in the off-gas. A process control in analogy to the aluminum electrolysis can reduce the PFC emission to a great extend and keep the process in a green process window. Therefore, a theoretical analysis is done of the cell voltage of the industrial neodymium electrolysis in dependence on the neodymium oxide concentration in the electrolyte. The analysis shows the different contributions to the cell voltage focusing on the impact of the anodic overvoltage on the cell voltage, by which the electrolysis process can be controlled. The model of the cell voltage is evaluated by laboratory neodymium electrolysis with a similar setup as the industrial cell. The relation of the oxide concentration, the anodic current density and the cell voltage with the cell resistance are measured. The continuous off-gas measurements show the gas concentration and PFC emissions. The effect of Nd2O3 feeding on the galvanostatic electrolysis is analyzed as well. Based on the results a process control strategy is proposed similar to the aluminum electrolysis strategy. The green process window is in a narrow oxide concentration range, making a continuous and precise oxide feeding essential.

PROBE-HOLE FIELD EMISSION MICROSCOPE SYSTEM CONTROLLED BY COMPUTER

A probe-hole field emission microscope system,controlled by the Apple Ⅱ computer,has been developed and operated successfully for measuring the work function of a single crystalplane.The detection screen,the phototube and the amplifier are combined for measuring theprobe-hole current.The combination is calibrated and the calibrated data are used in the com-puter program.The high voltage on the viewing screen is adjusted by using a D/A converter.The total current and the probe-hole current are acquired by using an A/D converter.A programin BASIC is used for processing all data and the Fowler-Nordheim plot parameters are given.Work functions of single crystal planes can then be calculated;as examples,the work functionson the clean W(100)and W(111)planes are measured to be 4.67 eV and 4.45 eV,respectively.

Angle Scattering Method for Soot Concentration Measurement under Ultra-Low Emissions Condition

Aiming at the problem of soot concentration measurement under ultra-low emission conditions,a forward small angle soot concentration measurement method is proposed.Taking a typical boiler emission of 0.1μm-3.0μm bimodal distribution soot as an object,the particle scatter simulation calculation under different parameters is carried out,and the influence of detection angle and particle size on the angular scatteringmeasurement of ultra-low emission soot is analyzed.The influence of detection angle and particle size on the angular scatteringmeasurement of ultra-lowemission soot is analyzed.Preferably,thewavelength of incident light is 650 nm,and the forward detection angle parameter is 15◦for the design of forward small angle soot concentration measurement system.An experimental system for measuring soot with standard concentration is built.Experiments of particle concentration measurement of 1.0μm and 3.0μm under ultra-low emission conditions are carried out.The results show that the average deviation of soot concentration measurement is less than 0.10 mg/m3 under the condition of ultra-low emission by using 15◦of forward detection,which provides an effective way for monitoring ultra-low emission soot concentration in coal-fired power plants.

Assessment of Uinta Basin Oil and Natural Gas Well Pad Pneumatic Controller Emissions

In the fall of 2016, a field study was conducted in the Uinta Basin Utah to improve information on oil and natural gas well pad pneumatic controllers (PCs) and emission measurement methods. A total of 80 PC systems at five oil sites (supporting six wells) and three gas sites (supporting 12 wells) were surveyed, and emissions data were produced using a combination of measurements and engineering emission estimates. Ninety-six percent of the PCs surveyed were low actuation frequency intermittent vent type. The overall whole gas emission rate for the study was estimated at 0.36 scf/h with the majority of emissions occurring from three continuous vent PCs (1.1 scf/h average) and eleven (14%) malfunctioning intermittent vent PC systems (1.6 scf/h average). Oil sites employed, on average 10.3 PC systems per well compared to 1.5 for gas sites. Oil and gas sites had group average PC emission rates of 0.28 scf/h and 0.67 scf/h, respectively. This difference was due in part to differing site selection procedures used for oil and gas sites. The PC system types encountered, the engineering emissions estimate approach, and comparisons to measurements are described. Survey methods included identification of malfunctioning PC systems and emission measurements with augmented high volume sampling and installed mass flow meters, each providing a somewhat different representation of emissions that are elucidated through example cases.

Carbon Emission Modeling and Analysis in Manufacturing Process for Numerical Control Machine Tools

Reducing carbon emissions( CEs) is the urgent demand all over the world. In order to realize the low-carbon numerical control( NC) machining, the evaluation model of a part's manufacturing carbon emission with NC machine tools was built by considering the influences of the cutting tool geometrical parameters.The manufacturing CEs were produced by electric power,cutting tools,and cutting fluid consumed in manufacturing process. The parameters of cutting tools affected not only the CEs,but also the machining quality. Then the actual constraint models of the machine performance,machining quality were given in order to optimize the cutting parameters and achieve the low-CEs. Finally,a case was given to analyze the influences of the cutting tool angles on the manufacturing CEs. The results show that the CEs decrease as the rake angle and edge angle increase under the constraints of the machine specifications and machining quality.

Robust Resource Management Control for CO2 Emission and Reduction of Greenhouse Effect: Stochastic Game Approach

With the increasingly severe global warming, investments in clean technology, reforestation and political action have been studied to reduce CO2 emission. In this study, a nonlinear stochastic model is proposed to describe the dynamics of CO2 emission with control inputs: clean technology, reforestation and carbon tax, under stochastic uncertainties. For the efficient resources management, a robust tracking control is designed to force resources tracking a desired reference output. The worst-case effect of stochastic parametric fluctuations, external disturbances and uncertain initial conditions on the tracking performance is considered and minimized from the dynamic game theory perspective. This stochastic game problem, in which one player (stochastic uncertainty) maximizes the tracking error and another player (control input) minimizes the tracking error, could be equivalent to a robust minimax tracking problem. To avoid solving the HJI, a fuzzy model is proposed to approximate the nonlinear CO2 emission model. Then the nonlinear stochastic game problem could be easily solved by fuzzy stochastic game approach via LMI technique.

Erratum to “Assessment of Uinta Basin Oil and Natural Gas Well Pad Pneumatic Controller Emissions” [Journal of Environmental Protection, 2017, 8, 394-415]

In the fall of 2016, a field study was conducted in the Uinta Basin Utah to improve information on oil and natural gas well pad pneumatic controllers (PCs) and emission measurement methods. A total of 80 PC systems at five oil sites (supporting six wells) and three gas sites (supporting 12 wells) were surveyed, and emissions data were produced using a combination of measurements and engineering emission estimates. Ninety-six percent of the PCs surveyed were low actuation frequency intermittent vent type. The overall whole gas emission rate for the study was estimated at 0.36 scf/h with the majority of emissions occurring from three continuous vent PCs (1.1 scf/h average) and eleven (14%) malfunctioning intermittent vent PC systems (1.6 scf/h average). Oil sites employed, on average 10.3 PC systems per well compared to 1.5 for gas sites. Oil and gas sites had group average PC emission rates of 0.28 scf/h and 0.67 scf/h, respectively. This difference was due in part to differing site selection procedures used for oil and gas sites. The PC system types encountered, the engineering emissions estimate approach, and comparisons to measurements are described. Survey methods included identification of malfunctioning PC systems and emission measurements with augmented high volume sampling and installed mass flow meters, each providing a somewhat different representation of emissions that are elucidated through example cases.

COMPOSITIVE EMISSION CONTROL SYSTEM OF GASOLINE VEHICLE

The working principle of a kind of compositive emission control system is inquired into, which includes exhaust heater, secondary air supplement, exhaust gas recirculation （EGR）, thermal reactor and catalytic converter, etc. The purification effect of CO, HC and NOx emission of the gasoline spark ignite （S.I.） engine is studied. The entire vehicle driving cycle tests based on the national emission standard and a series of the gasoline engine-testing bench tests including full load characteristic experiment, load characteristic experiment and idle speed experiment are done. The results show that the system has a very good emission control effect to CO, HC and NOx of gasoline engine. The construction of the system is very simple and can be mounted on the exhaust pipe conveniently without any alteration of the vehicle-use gasoline engine.

Research on the effects of command-and-control and market-oriented policy tools on China's energy conservation and emissions reduction innovation

The impact of environmental regulation on technology innovation is a hot spot in current research where a large number of empirical studies are based on Porter Hypothesis(PH). However, there are still controversies in academia about the establishment of "weak" and "narrow" versions of PH. Based on the panel data of application for patent of energy conservation and emission reduction(ECER) technology of Chinese city scale during 2008-2014, comprehensive energy price, pollutant emission, etc., mixed regression model and systematic generalized method of moments method were adopted, respectively,to study the impact of market-oriented and command-and-control policy tool on China's ECER technology innovation. The results show that the environmental regulation hindered the technological innovation in the immediate phase; however, it turned out to be positive in the first-lag phase. Hence, the establishment of "weak" PH is time-bounded. The command-and-control policy tool played a more positive role in promoting technological innovation in the first-lag phase than market-oriented policy tool. Therefore, "narrow" PH is not tenable. The reason is that the main participants of China's ECER technology innovation are state-owned companies and public institutions. Regionally speaking, the impact which command-and-control policy tool has on technological innovation at sight was nonsignificant in the eastern, the central, and the western regions of China whilst market-oriented policy tool had a negative effect. And market-oriented policy tool in the central region had strongest negative effect, which would diminish in the eastern region and become weakest in the western region. This was related to regional energy consumption level and the market economic vitality.

Re-understanding and Thinking about Environmental Impact of Coal-fired Power Plants under Ultra-low Emission

From the perspective of development background,concepts and related policies of ultra-low emission,according to work practice,some issues and difficulties that need to be paid attention to in the environmental impact assessment of ultra-low-emission thermal power projects were discussed from the aspects of evaluation criteria,evaluation grade and scope,pollution control technical lines,environmental benefit accounting,and total emission control,and corresponding recommendations were put forward.

Eureka Webair： Web-Based Air Quality Management, Real-Time Forecasting and Emission Control Optimization

For the assessment and management of regional to local air quality, an integrated environmental management information system was built within the multi national Eureka project 3266 Webair, http：//www.ess.co.at/WEBAIR. The system combines data bases and GIS and a range of coupled models and analytical tools that address a range of typical management problems and cover several levels of nesting from regional to city level and street canyons. The main functions are to support regulatory tasks, compliance monitoring, operational forecasting and reporting, impact assessment EIA （environmental impact assessment）, SEA （strategic environmental assessment） and public information within one consistent framework. A major objective is the improvement of air quality through emission control. The integrated model system together with its shared data bases provides a reliable, consistent basis for the non-linear techno-economic and multi-criteria optimization of emission control strategies （including greenhouse gases and energy efficiency）. A real-time expert system drives, supports and monitors the autonomous and interactive operations, and provides embedded QA/QC （quality assurance/quality control） functions for reliable operations and ease of use.

Study on the Environmental Quality Guarantee Ratio on the Basis of Total Air Pollutant Emission Amount Control

The hourly and daily air quality concentration in the total air pollutant emission amount control zone is not sure to be continuously up to national ambient air quality standard, even though the total annual air pollutant emission is permitted under the total air pollutant emission amount control (TAPEAC) on the basis of A-value method. So the concept of the environmental quality guarantee ratio (EQGR) for TAPEAC is advanced in this paper and its quantitative formula is figured out for both hourly and daily EQGR. It is concluded that the EQGR is related with the yearly arrangement of A-value besides the pollutant type. According to the meteorological data in a lower area along Yangtze River in 2000, the yearly A-value trend is analyzed. Based on the data, the hourly EQGR of SO 2 and NO 2 is respectively 97.4% and 90.2%, and daily EQGR respectively 90.2% and 79.5%.

Sulfur Dioxide Emission Control,Blockade and Drainage

This paper presents the present status of sulfur dioxide emission from thermal plants in China, tells the main problems existing in its emission control and finally gives out suggestions to the problems, that is, to constitute complete standards and regulations and enhancesupervision accordingly.

Exploration and Practice of Precision Emission Reduction Monitoring System in Air Pollution Prevention and Control in a District of Tianjin

At present,China’s atmospheric environmental protection work has achieved initial results,but environmental protection is facing increasing pressure,and the environmental situation is still not optimistic.In response to the call of the state,efforts have been intensified in environmental protection and ecological civilization construction,and supply-side structural reform has been actively promoted,and the Implementation Plan for Tianjin’s Comprehensive Discharge of Industrial Pollution Sources to Meet Standards has been promoted.When the total amount of pollutants discharged in key areas far exceeds the environmental capacity,regional heavy pollution weather will still occur once adverse meteorological conditions are encountered.In accordance with the Law of the People’s Republic of China on the Prevention and Control of Atmospheric Pollution,when the deterioration of air quality to a certain extent,to protect public health,key gas related industries should carry out emergency emission reduction in accordance with the local emergency plan while the local government starts the emergency response of heavy pollution weather.Direct economic loss of emergency response to heavy pollution weather is enormous.On the basis of meeting the total amount of emissions required by the state,the project aims to achieve the effect of"emission reduction and production increase"by precise emission reduction according to local characteristics.