Effect of building energy efficiency standards on carbon emission efficiency in commercial buildings

The building sector plays a crucial role in the worldwide shift toward achieving net-zero emissions.Building energy efficiency standards(BEESs)are highly effective policies for reducing carbon emissions.Therefore,exploring the provincial variations in carbon emission efficiency(CEE)in the building sector and identifying the effect of BEESs on CEE is crucial.This study focuses on commercial buildings in China and applies a difference in differences model to evaluate the impact of BEESs on the CEE of commercial buildings.The slacks-based measure–data envelopment analysis model is employed to assess the CEE of commercial buildings in 30 Chinese provinces from 2000 to 2019.Furthermore,heterogeneous tests are used to explore how climate characteristics and economic conditions affect the efficiency of BEESs.The results indicate that BEESs positively influence the CEE of commercial buildings.Specifically,a 1%increase in the intensity of BEESs causes a 0.1484%increase in the CEE of commercial buildings.Moreover,the impact of BEESs is particularly pronounced in the southern and western provinces.This study provides valuable scientific evidence for governments to enhance BEESs implementation.

Suggestion on further strengthening ultra-low emission standards for PM emission from coal-fired power plants in China

China has established the largest clean coal-fired power generation system in the world by accomplishing the technological transformation of coal-fired power plants(CFPPs)to achieve ultra-low emission.The potential for further particulate matter(PM)emission reduction to achieve near-zero emission for CFPPs has become a hotspot issue.In this study,PM emission from some ultra-low emission CFPPs adopting advanced air pollutant control technologies in China was reviewed.The results revealed that the average filterable particulate matter(FPM)concentration,measured as the total particulate matter(TPM)according to the current national monitoring standard,was(1.67±0.86)mg/m^(3),which could fully achieve the ultra-low emission standard for key regions(5 mg/m^(3)),but that achieving the near-zero emission standard was difficult(1 mg/m^(3)).However,the condensable particulate matter(CPM),with an average concentration of(1.06±1.28)mg/m^(3),was generally ignored during monitoring,which led to about 38.7%underestimation of the TPM.Even considering both FPM and CPM,the TPM emission from current CFPPs would contribute to less than 5%of atmospheric PM_(2.5) concentrations in the key cities and regions in China.Therefore,further reduction in FPM emission proposed by the near-zero emission plan of CFPPs may have less environmental benefit than emission control of other anthropogenic sources.However,it is suggested that the management of CPM emission should be strengthened,and a national standard for CPM emission monitoring based on the indirect dilution method should be established for CFPPs.Those measurements are helpful for optimal operation of air pollutant control devices and continuously promoting further emission reduction.

Challenges from the New Emission Standards for SO_2 and NO_X

The Emission Standards of Air Pollutants from Thermal Power Plants (GB 13223-2011) prescribe a stricter limitation to air pollutants than ever before. As set in the new emission standard, the limitations of SO2 and NOX for sensitive areas under normal conditions are 50 mg/m3 and 100 mg/m3, respectively. The objective analysis and suggestions are proposed. The recent status and operational experience of desulfurization and denitrification equipment are discussed. From the discussions, thermal power plants face a huge challenge to satisfy the new emission standards. For further reducing of the emission concentrations of SO2 and NOX, three methods were introduced, including: seriously implementing the emission standards, improving treatment equipment, and increasing the efficiencies of desulfurization and denitrification.

Pollutant emission reduction effect through effluent tax,concentration-based effluent standard,or both

There are numerous studies comparing different kinds of environmental taxes and standards.However,forms of environmental standards focused by former researchers are usually quantitybased limits/standards(e.g.pounds per day or pounds per unit of output).Concentration-based emission standard(e.g.milligrams per liter of wastewater) as one important form of environmental standard has not been given much attention.In this article,comparable estimates of their probable effect on enterprise pollution reduction will be developed for concentrationbased effluent standards,effluent taxes,and a combination of both.A linear simulation model is used to clearly and obviously compare the effects of effluent taxes and concentration-based standards within the same figure.With one detailed application to the paper industry,some enlightenment and conclusions-as well as the general applicability of these principles-are then provided:Under the same effluent tax rate,enterprises,groups,and industries that are cleaner will reduce more pollutants than those that have higher pollutant abatement costs.It is recommended that effluent taxes are set by avoiding cutting it even at one stroke and considering the feasibility of pollution-reducing technology in various industries.It is necessary to reduce MAC of enterprises to better stimulate enterprises' or industries' emission reduction by preferential measures,such as high tax rate coordinated by speeding up the depreciation of environmental protection equipment.

Thinking About the New Atmospheric Pollutant Emission Standard for Thermal Power Plants

China's new Atmospheric Pollutant Emission Standard for Thermal Power Plants has been made the most stringent atmospheric pollutant emission limit in the world,with the intensified control of nitrogen oxides in the air pollutants emitted by thermal power plants,the tightened limit on the emission of sulfur dioxide,and the widened range of control including mercury and other compounds discharge.The adoption of the new standard will considerably impact the survival and development of power plants,even the whole economy of the nation.While implementing all the policies and measures on emission reduction issued by the State to fulfill political,social,and economic responsibilities,China Huadian Corporation,one of the leading state-owned power generation groups,is actively exploring the green and low-carbon path for the sound and rapid development of the group.

Angle Scattering Method for Soot Concentration Measurement under Ultra-Low Emissions Condition

Aiming at the problem of soot concentration measurement under ultra-low emission conditions,a forward small angle soot concentration measurement method is proposed.Taking a typical boiler emission of 0.1μm-3.0μm bimodal distribution soot as an object,the particle scatter simulation calculation under different parameters is carried out,and the influence of detection angle and particle size on the angular scatteringmeasurement of ultra-low emission soot is analyzed.The influence of detection angle and particle size on the angular scatteringmeasurement of ultra-lowemission soot is analyzed.Preferably,thewavelength of incident light is 650 nm,and the forward detection angle parameter is 15◦for the design of forward small angle soot concentration measurement system.An experimental system for measuring soot with standard concentration is built.Experiments of particle concentration measurement of 1.0μm and 3.0μm under ultra-low emission conditions are carried out.The results show that the average deviation of soot concentration measurement is less than 0.10 mg/m3 under the condition of ultra-low emission by using 15◦of forward detection,which provides an effective way for monitoring ultra-low emission soot concentration in coal-fired power plants.

Re-understanding and Thinking about Environmental Impact of Coal-fired Power Plants under Ultra-low Emission

From the perspective of development background,concepts and related policies of ultra-low emission,according to work practice,some issues and difficulties that need to be paid attention to in the environmental impact assessment of ultra-low-emission thermal power projects were discussed from the aspects of evaluation criteria,evaluation grade and scope,pollution control technical lines,environmental benefit accounting,and total emission control,and corresponding recommendations were put forward.

The Progress of International and National Carbon Emission Management Standardization

Standardization, as a very effective tool, plays a more and more important supporting role in promoting China's policy implementation in addressing climate change and other issues. This paper summarizes the international situation and progress, and analyzes the international development tendency of carbon emission management standardization. Correspondingly, the national situation and progress of carbon emission management standardization is reviewed including involvement of international standardization, establishment of national standardization committee, development of national standards and so on. And the policy suggestions are raised to strengthen the standardization work in the fields of addressing climate change during the 12 th Five-Year Plan period.

On Countermeasures and Suggestions to Control NO_X Emissions from Utility Boilers

In combination with low NOX combustion techniques inChina and in view of limits of the Standard of Discharging Atmo-spheric Pollutants from Thermal Power Plants to be published soon,this paper presents corresponding technical countermeasures andkey subjects to be studied.

^(18)F-Fluorodeoxyglucose positron emission tomography/computed tomography comparison of gastric lymphoma and gastric carcinoma

AIM To compare ^(18)F-fluorodeoxyglucose positron emission tomography/computed tomography(^(18)F-FDG PET/CT) features in gastric lymphoma and gastric carcinoma.METHODS Patients with newly diagnosed gastric lymphoma or gastric carcinoma who underwent ^(18)F-FDG PET/CT prior to treatment were included in this study. We reviewed and analyzed the PET/CT features of gastric wall lesions,including FDG avidity,pattern(focal/diffuse),and intensity [maximal standard uptake value:(SUVmax)]. The correlation of SUVmax with gastricclinicopathological variables was investigated by χ~2 test,and receiver-operating characteristic(ROC) curve analysis was performed to determine the differential diagnostic value of SUVmax-associated parameters in gastric lymphoma and gastric carcinoma. RESULTS Fifty-two patients with gastric lymphoma and 73 with gastric carcinoma were included in this study. Abnormal gastric FDG accumulation was found in 49 patients(94.23%) with gastric lymphoma and 65 patients(89.04%) with gastric carcinoma. Gastric lymphoma patients predominantly presented with type Ⅰ and type Ⅱ lesions,whereas gastric carcinoma patients mainly had type Ⅲ lesions. The SUVmax(13.39 ± 9.24 vs 8.35 ± 5.80,P < 0.001) and SUVmax/THKmax(maximal thickness)(7.96 ± 4.02 vs 4.88 ± 3.32,P < 0.001) were both higher in patients with gastric lymphoma compared with gastric carcinoma. ROC curve analysis suggested a better performance of SUVmax/THKmax in the evaluation of gastric lesions between gastric lymphoma and gastric carcinoma in comparison with that of SUVmax alone.CONCLUSION PET/CT features differ between gastric lymphoma and carcinoma,which can improve PET/CT evaluation of gastric wall lesions and help differentiate gastric lymphoma from gastric carcinoma.

Role of 18F-fluorodeoxyglucose positron emission tomography imaging in surgery for pancreatic cancer

AIM： To evaluate the role of positron emission tomography using 18F-fluorodeoxyglucose （FDG-PET） in the surgical management of patients with pancreatic cancer, including the diagnosis, staging, and selection of patients for the subsequent surgical treatment. METHODS： This study involved 53 patients with proven primary pancreatic cancer. The sensitivity of diagnosing the primary cancer was examined for FDG-PET CT, cytological examination of the bile or pancreatic juice, and the serum levels of carcinoembrionic antigens （CEA） and carbohydrate antigen 19-9 （CA29-9）. Next, the accuracy of staging was compared between FDG-PET and CT. Finally, FDG-PET was analyzed semiquantitatively using the standard uptake value （SUV）. The impact of the SUV on patient management was evaluated by examining the correlations between the SUV and the histological findings of cancer. RESULTS： The sensitivity of FDG-PET, CT, cytological examination of the bile or pancreatic juice, and the serum levels of CEA and CA19-9 were 92.5%, 88.7%, 46.4%, 37.7% and 69.8%, respectively. In staging, FDG-PET was superior to CT only in diagnosing distant disease （bone metastasis）. For local staging, the sensitivity of CT was better than that of FDG-PEr. The SUV did not correlate with the pTNM stage, grades, invasions to the vessels and nerve, or with the size of the tumor. However, there was a statistically significant difference （4.6 ± 2.9 vs 7.8 ± 4.5, P = 0.024） in the SUV between patients with respectable and unresectable disease. CONCLUSION： FDG-PET is thus considered to be useful in the diagnosis of pancreatic cancer. However, regarding the staging of the disease, FDG-PET is not considered to be a sufficiently accurate diagnostic modality. Although the SUV does not correlate with the patho-histological prognostic factors, it may be useful in selecting patients who should undergo subsequent surgical treatment.

Optimization of the Performance of Marine Diesel Engines to Minimize the Formation of SO_x Emissions

Optimization procedures are required to minimize the amount of fuel consumption and exhaust emissions from marine engines.This study discusses the procedures to optimize the performance of any marine engine implemented in a 0D/1D numerical model in order to achieve lower values of exhaust emissions.From that point,an extension of previous simulation researches is presented to calculate the amount of SOx emissions from two marine diesel engines along their load diagrams based on the percentage of sulfur in the marine fuel used.The variations of SOx emissions are computed in g/k W·h and in parts per million(ppm)as functions of the optimized parameters:brake specific fuel consumption and the amount of air-fuel ratio respectively.Then,a surrogate model-based response surface methodology is used to generate polynomial equations to estimate the amount of SOx emissions as functions of engine speed and load.These developed non-dimensional equations can be further used directly to assess the value of SOx emissions for different percentages of sulfur of the selected or similar engines to be used in different marine applications.

Nomogram using F-18 fluorodeoxyglucose positron emission tomography/computed tomography for preoperative prediction of lymph node metastasis in gastric cancer

BACKGROUND Lymph node(LN)metastasis is an important prognostic factor in patients with gastric cancer(GC).However,the evaluation of LN metastasis status in the preoperative setting is not accurate.Therefore,precise preoperative prediction of LN metastasis status is crucial for optimal treatment in patients with GC.AIM To develop a preoperative nomogram for LN metastasis using F-18 fluorodeoxyglucose(F-18 FDG)positron emission tomography/computed tomography(PET/CT)and preoperative laboratory test findings in GC.METHODS In this study,the data of 566 GC patients who underwent preoperative F-18 FDG PET/CT and subsequent surgical resection were analyzed.The LN metastasis prediction model was developed in the training cohort and validated in the internal validation cohort.Routine preoperative laboratory tests,including albumin and carbohydrate antigen(CA)19-9 were performed in all patients.Univariate and multivariable logistic regression was performed to validate the preoperative predictive indicators for LN metastasis.RESULTS Of the 566 patients,232(41%)had confirmed histopathologic LN metastasis.Univariate logistic regression revealed that the tumor location,blood hemoglobin,serum albumin levels,neutrophil to lymphocyte ratio,platelet to lymphocyte ratio,CA 19-9,maximum standardized uptake value(SUVmax)of the primary tumor(T_SUVmax),and SUVmax of LN(N_SUVmax)were significantly associated with LN metastasis.In multivariate analysis,T_SUVmax(OR=1.08;95%CI:1.02–1.15;P=0.011)and N_SUVmax(OR=1.49;95%CI:1.19–1.97;P=0.002)were found to be significant predictive factors for LNmetastasis.The LN metastasis prediction model using T_SUVmax,N_SUVmax,serum albumin,and CA 19-9 yielded an area under the curve(AUC)of 0.733(95%CI:0.683–0.784,P=0.025)in the training cohort and AUC of 0.756(95%CI:0.678–0.833,P<0.001)in the test cohort.CONCLUSION T_SUVmax and N_SUVmax measured by preoperative F-18 FDG PET/CT are independent predictive factors for LN metastasis in GC.

Congenital hyperinsulinism:Role of fluorine-18L-3, 4 hydroxyphenylalanine positron emission tomography scanning

Congenital hyperinsulinism(CHI) is a rare but complex heterogeneous disorder caused by unregulated secre-tion of insulin from the β-cells of the pancreas leading to severe hypoglycaemia and neuroglycopaenia. Swift diagnosis and institution of appropriate management is crucial to prevent or minimise adverse neurodevel-opmental outcome in children with CHI. Histologically there are two major subtypes of CHI, diffuse and focal disease and the management approach will significantly differ depending on the type of the lesion. Patients with medically unresponsive diffuse disease require a near total pancreatectomy, which then leads on to the de-velopment of iatrogenic diabetes mellitus and pancre-atic exocrine insufficiency. However patients with focaldisease only require a limited pancreatectomy to re-move only the focal lesion thus providing complete cure to the patient. Hence the preoperative differentiation of the histological subtypes of CHI becomes paramount in the management of CHI. Fluorine-18L-3, 4-hydroxy-phenylalanine positron emission tomography(18F-DOPA-PET) is now the gold standard for pre-operative differentiation of focal from diffuse disease and locali-sation of the focal lesion. The aim of this review article is to give a clinical overview of CHI, then review the role of dopamine in β-cell physiology and finally discuss the role of 18F-DOPA-PET imaging in the management of CHI.

Characterization of focal hypermetabolic thyroid incidentaloma: An analysis with F-18 fluorodeoxyglucose positron emission tomography/computed tomography parameters

BACKGROUND Incidentally found thyroid tumor(thyroid incidentaloma,TI)on F-18 fluorodeoxyglucose(FDG)positron emission tomography-computed tomography(PETCT)is reported in 2.5%-5%of patients being investigated for non-thyroid purposes.Up to 50%of these cases have been diagnosed to be malignant by cytological/histological results.Ultrasonography(US)and fine-needle aspiration cytology are recommended for thyroid nodules with high FDG uptake(hypermetabolism)that are 1 cm or greater in size.It is important to accurately determine whether a suspicious hypermetabolic TI is malignant or benign.AIM To distinguish malignant hypermetabolic TIs from benign disease by analyzing F-18 FDG PET-CT parameters and to identify a cut-off value.METHODS Totally,12761 images of patients who underwent F-18 FDG PET-CT for nonthyroid purposes at our hospital between January 2016 and December 2020 were retrospectively reviewed,and 339 patients[185 men(mean age:68±11.2)and 154 women(mean age:63±15.0)]were found to have abnormal,either focal or diffuse,thyroid FDG uptake.After a thorough review of their medical records,US,and cytological/histological reports,46 eligible patients with focal hypermetabolic TI were included in this study.The TIs were categorized as malignant and benign according to the cytological/histological reports,and four PET parameters[standardized uptake value(SUV)max,SUV_(peak),SUV_(mean),and metabolic tumor volume(MTV)]were measured on FDG PET-CT.Total lesion glycolysis(TLG)was calculated by multiplying the SUV_(mean) by MTV.Both parametric and non-parametric methods were used to compare the five parameters between malignant and benign lesions.Receiver operating characteristic(ROC)curve analysis was performed to identify a cut-off value.RESULTS Each of the 46 patients[12 men(26.1%;mean age:62±13.1 years)and 34 women(73.9%;mean age:60±12.0 years)]with focal hypermetabolic TIs had one focal hypermetabolic TI.Among them,26(56.5%)were malignant and 20(43.5%)were benign.SUV_(max),SUV_(peak),SUV_(mean),and TLG were all higher in malignant lesions than benign ones,but the difference was statistically significant(P=0.012)only for SUV_(max).There was a positive linear correlation(r=0.339)between SUV_(max) and the diagnosis of malignancy.ROC curve analysis for SUV_(max) revealed an area under the curve of 0.702(P<0.05,95%confidence interval:0.550-0.855)and SUV_(max) cut-off of 8.5 with a sensitivity of 0.615 and a specificity of 0.789.CONCLUSION More than half of focal hypermetabolic TIs on F-18 FDG PET-CT were revealed as malignant lesions,and SUV_(max) was the best parameter for discriminating between malignant and benign disease.Unexpected focal hypermetabolic TIs with the SUV_(max) above the cut-off value of 8.5 may have a greater than 70%chance of malignancy;therefore,further active assessment is required.

Evaluation of the Implementation of a Low Emission Zone in Lisbon

The city of Lisbon, like many others in the EU region, introduced a Low Emission Zone (LEZ) as a tool for improving air quality in its city centre. This kind of emission reduction schemes is always controversial since it might lead to significant changes in the daily behaviours of its inhabitants. In order to evaluate the effects of the measure, an estimation of the impact of the introduction of the Lisbon LEZ was performed. Real traffic counting and fleet characterization combined with CORINAR-based emission inventory methodology allowed to estimate the impacts of three different scenarios applied to the “business as usual” condition (current vehicle fleet) ranging from “no circulation from non- compliant vehicles” to an “aggressive fleet renewal”. Results highlight the high percentage of atmospheric emissions of PM10 and NOx that might result from certain fleets like taxis and buses, especially because there was an emphasis in standardized/normalized estimations (emissions per 1000 vehicles) in order to allow different strategic approaches. The total reduction of PM10 emissions associated to each scenario vary between 6 ton.year-1 (scenario 2) and 8 ton.year-1 (scenario 1), or 25% and 34% less emissions. In terms of NOxemission reductions vary between 6 ton.year-1 (scenario 2) and 57 ton.year-1 (scenario 1), or 1% and 7% less emissions. The Lisbon LEZ is therefore much more efficient in reducing PM10 emissions compared to NOx. Major reduction in PM10 and NOx emissions are to be expected with a moderate intervention in the (relatively old) taxi fleet in Lisbon while for passenger cars the impact is limited. However in absolute terms and due to its urban mileage passenger cars should also continue being included in Lisbon LEZ. Simultaneously, an effort in the increase of dedicated lanes for public transport should be made, for further reductions in PM10 and NOx emissions.

Assessment of incidental focal colorectal uptake by analysis of fluorine-18 fluorodeoxyglucose positron emission tomography parameters

BACKGROUND Colon and rectal cancers are among the top five cancers worldwide in terms of their incidence and mortality rates.As the treatment options for cure include surgery even in specific advanced-stage cases,the early detection of lesions is important for applying active treatment methods.Fluorine-18 fluorodeoxyglucose(F-18 FDG)positron emission tomography/computed tomography(PET/CT)is an established imaging study for many types of cancers;however,physiologic uptake in the gastrointestinal tract is a frequent finding and may interfere with lesion identification.Nevertheless,as unexpectedly observed focal colorectal F-18 FDG uptake may harbor malignant lesions,further examination must not be avoided.AIM To assess the clinical implications of unexpected focal colorectal F-18 FDG uptake by analyzing FDG PET parameters.METHODS A total of 15143 F-18 FDG PET/CT scans performed at our hospital between January 2016 and September 2021 were retrospectively reviewed to identify incidentally observed focal colorectal FDG uptake.Finally,83 regions showing focal colorectal FDG uptake with final histopathological reports from 80 patients(45 men and 35 women with mean ages of 66.9±10.7 years and 63.7±15.3 years,respectively)were eligible for inclusion in the present study.Each focal hypermetabolic colorectal region was classified as malignant,premalignant,or benign according to the histopathological report.PET parameters such as maximum and peak standardized uptake value(SUVmax and SUVpeak),metabolic tumor volume(MTV),mean SUV of the metabolic tumor volume(mSUVmtv),and total lesion glycolysis(TLG)were measured or calculated for the corresponding hypermetabolic regions.Parametric and nonparametric statistical comparisons of these parameters were performed among the three groups.Receiver operating characteristic curves were plotted to identify cut-off values.RESULTS The detection rate of incidental focal colorectal uptake was 0.53%(80/15,143).Of the 83 regions with unexpected focal colorectal hypermetabolism,28.9%(24/83)were malignant,32.5%(27/83)were premalignant,and 38.6%(32/83)were benign.Overall,61.4% of the regions had malignant or premalignant lesions.SUVmax,SUVpeak,and mSUVmtv differentiated malignant and/or premalignant lesions from benign lesions with statistical significance(P<0.05).mSUVmtv3.5 differentiated malignant from benign lesions,with the largest area under the curve(AUC)of 0.792 and a cut-off of 4.9.SUVmax showed the largest AUC of 0.758 with a cut-off value of 7.5 for distinguishing between premalignant and benign lesions.Overall,SUVmax with a cut-off value of 7.6(AUC:0.770,95% confidence interval(CI):0.668-0.872;sensitivity,0.686;specificity,0.688)was a superior parameter for distinguishing between malignant/premalignant and benign lesions or physiologic uptake.No parameters differentiated malignant from premalignant lesions.Moderate or weak positive correlations were observed between the long diameter of the malignant lesions and PET parameters such as SUVpeak and some mSUVmtv.CONCLUSION Approximately two-thirds(61.4%)of incidental focal hypermetabolic colorectal regions were malignant/premalignant lesions,for which SUVmax was an independent diagnostic parameter.Unexpected suspicious focal colorectal FDG uptake should not be avoided and consideration for further evaluation is strongly recommended not to miss the two-thirds.

Application and Development Trends of Spectral Analysis in Draft of Non-Ferrous Metal Standards in China

Spectral analysis was a method of identifying substances, determining their chemical composition and calculating their content based on their spectral characteristics. This paper mainly discussed the application of various spectroscopic techniques, mainly including atomic absorption spectrometry (AAS) inductively coupled plasma emission spectrometry (ICP-AES) X-ray fluorescence spectroscopy (XRF) atomic fluorescence spectroscopy (AFS) direct reading spectroscopy (OES) glow discharge emission spectroscopy (GD-OSE) laser-induced breakdown spectroscopy (LIBS), in the formulation of non-ferrous metal standards in China. The AAS method was the most widely used single-element microanalysis method among the non-ferrous metal standards. The ICP-AES method was good at significant advantages in the simultaneous detection of multiple elements. The XRF method was increasingly used in the determination of primary and secondary trace elements due to its simple sample preparation and high efficiency. The AFS was mostly detected by single-element trace analysis. OES GD-OES and LIBS were playing an increasingly important role in the new demand area for non-ferrous metals. This paper discussed matrix elimination, sample digestion, sample preparation, instrument categories and other aspects of some standards, and summarized the advantages of spectral analysis and traditional chemical analysis methods. The new methods of future spectroscopic technology had been illustrated in the process of developing non-ferrous metal standards.

Evaluation of Energy-Efficiency Standards for Room Air Conditioners in the US

This article describes an analysis of the energy and economic impacts of possible energy efficiency standards for room air conditioners on both U.S. consumers and the nation as a whole. We used two metrics to determine the effect of standards on a representative sample of U.S. consumers: life-cycle cost change and payback period. For the national impact analysis, we evaluated national energy savings attributable to each potential standard, the monetary value of the energy savings to consumers of room air conditioners, the increased total installed costs because of standards, and the net present value of the difference between the value of energy savings and increased total installed costs. Our analysis indicates that standards for room air conditioners at efficiency level 3, which is 17% more efficient than today’s typical unit in the case of room air conditioners less than 6000 Btu/h with louvers and 12% more efficient in the case of room air conditioners 8000 - 13,999 Btu/h with louvers, would save close to one quad of energy over 30 years and have a net present value of consumer benefit of between ?$0.14 billion and $1.82 billion, depending on the discount rate. In addition, such standards would reduce carbon dioxide emissions and NOx emissions.

Sulfur Dioxide Emission Control,Blockade and Drainage

This paper presents the present status of sulfur dioxide emission from thermal plants in China, tells the main problems existing in its emission control and finally gives out suggestions to the problems, that is, to constitute complete standards and regulations and enhancesupervision accordingly.