Experimental study of the influencing factors and mechanisms of the pressure-reduction and augmented injection effect by nanoparticles in ultra-low permeability reservoirs

Nanoparticles(NPs)have gained significant attention as a functional material due to their ability to effectively enhance pressure reduction in injection processes in ultra-low permeability reservoirs.NPs are typically studied in controlled laboratory conditions,and their behavior in real-world,complex environments such as ultra-low permeability reservoirs,is not well understood due to the limited scope of their applications.This study investigates the efficacy and underlying mechanisms of NPs in decreasing injection pressure under various injection conditions(25—85℃,10—25 MPa).The results reveal that under optimal injection conditions,NPs effectively reduce injection pressure by a maximum of 22.77%in core experiment.The pressure reduction rate is found to be positively correlated with oil saturation and permeability,and negatively correlated with temperature and salinity.Furthermore,particle image velocimetry(PIV)experiments(25℃,atmospheric pressure)indicate that the pressure reduction is achieved by NPs through the reduction of wall shear resistance and wettability change.This work has important implications for the design of water injection strategies in ultra-low permeability reservoirs.

Optimization of Gas-Flooding Fracturing Development in Ultra-Low Permeability Reservoirs

Ultra-low permeability reservoirs are characterized by small pore throats and poor physical properties, which areat the root of well-known problems related to injection and production. In this study, a gas injection floodingapproach is analyzed in the framework of numerical simulations. In particular, the sequence and timing of fracturechanneling and the related impact on production are considered for horizontal wells with different fracturemorphologies. Useful data and information are provided about the regulation of gas channeling and possible strategiesto delay gas channeling and optimize the gas injection volume and fracture parameters. It is shown that inorder to mitigate gas channeling and ensure high production, fracture length on the sides can be controlled andlonger fractures can be created in the middle by which full gas flooding is obtained at the fracture location in themiddle of the horizontal well. A Differential Evolution (DE) algorithm is provided by which the gas injectionvolume and the fracture parameters of gas injection flooding can be optimized. It is shown that an improvedoil recovery factor as high as 6% can be obtained.

Porosity, permeability and rock mechanics of Lower Silurian Longmaxi Formation deep shale under temperature-pressure coupling in the Sichuan Basin, SW China

To investigate the porosity, permeability and rock mechanics of deep shale under temperature-pressure coupling, we selected the core samples of deep shale from the Lower Silurian Longmaxi Formation in the Weirong and Yongchuan areas of the Sichuan Basin for porosity and permeability experiments and a triaxial compression and sound wave integration experiment at the maximum temperature and pressure of 120 ℃ and 70 MPa. The results show that the microscopic porosity and permeability change and the macroscopic rock deformation are mutually constrained, both showing the trend of steep and then gentle variation. At the maximum temperature and pressure, the porosity reduces by 34%–71%, and the permeability decreases by 85%–97%. With the rising temperature and pressure, deep shale undergoes plastic deformation in which organic pores and clay mineral pores are compressed and microfractures are closed, and elastic deformation in which brittle mineral pores and rock skeleton particles are compacted. Compared with previous experiments under high confining pressure and normal temperature,the experiment under high temperature and high pressure coupling reveals the effect of high temperature on stress sensitivity of porosity and permeability. High temperature can increase the plasticity of the rock, intensify the compression of pores due to high confining pressure, and induce thermal stress between the rock skeleton particles, allowing the reopening of shale bedding or the creation of new fractures along weak planes such as bedding, which inhibits the decrease of permeability with the increase of temperature and confining pressure. Compared with the triaxial mechanical experiment at normal temperature, the triaxial compression experiment at high temperature and high pressure demonstrates that the compressive strength and peak strain of deep shale increase significantly due to the coupling of temperature and pressure. The compressive strength is up to 435 MPa and the peak strain exceeds 2%, indicating that high temperature is not conducive to fracture initiation and expansion by increasing rock plasticity. Lithofacies and mineral composition have great impacts on the porosity, permeability and rock mechanics of deep shale. Shales with different lithologies are different in the difficulty and extent of brittle failure. The stress-strain characteristics of rocks under actual geological conditions are key support to the optimization of reservoir stimulation program.

Experimental analysis of the pore structure, relative permeability, and water flooding characteristics of the Yan'an Formation sandstone, southwestern Ordos Basin

The oil and gas potential of the Yan'an Formation in the Ordos Basin has yet to be fully tapped. In this study, the pore structure, mobile fluid saturation, and water flooding micro-mechanism of the Yan'an Formation sandstone are systematically studied through the application of a series of rock physics and fluid experiments. The results show that there is a good positive correlation between porosity and permeability, and the reservoirs are divided into types Ⅰ, Ⅱ, and Ⅲ. Mercury injection tests show that the average pore throat radius of the oil-bearing reservoir ranges from 1 to 7 μm. The displacement pressure of the Yan'an Formation is also relatively low, and it decreases from 0.1 MPa to 0.01 MPa as the rock porosity increases from 11% to 18%. NMR tests show that small (diameter <0.5 μm) and medium pores (diameter ranging from 0.5 to 2.5 μm) are predominant in the reservoir. Different types of reservoirs have different characteristics of relative permeability curve. In addition, when the average oil recovery rate is less than 1 ml/min, the oil displacement efficiency increases faster. However, when the average oil recovery rate is between 1–3.5 ml/min, the oil displacement efficiency is maintained at around 27%–30%. Physical properties of the reservoir, pore-throat structure, experimental pressure difference, and pore volume injected — all have significant effects on oil displacement efficiency. For Type Ⅰ and Type Ⅱ reservoirs, the increase of the pore volume injected has a significant effect on oil displacement efficiency. However, for Type Ⅲ reservoirs, the change of pore volume injected has insignificant effect on oil displacement efficiency. This study provides a reference for the formulation of estimated ultimate recovery (EUR) measures for similar sandstone reservoirs.

A simulation study of formation permeability as a function of methane hydrate concentration

We modeled and studied the permeability of methane hydrate bearing formations as a function of methane hydrate concentration by artificially varying the T2 distribution as well as using a tube-sphere model.We varied the proportion of irreducible and movable water as well as the total porosity associated with the T2 distribution and found the normalized permeability as a function of methane hydrate concentration is dependent of these variations.Using a tube-sphere model,we increased the methane hydrate concentration by randomly placing methane hydrate crystals in the pore spaces and computed the permeability using either the Schlumberger T2 relaxation time formula or a direct calculation based on Darcy＇s law assuming Poiseuille flow.Earlier experimental measurements reported in the literature show there is a methane hydrate concentration range where the permeability remains relatively constant.We found that when the Schlumberger T2 relaxation time formula is used the simulation results show a curve of normalized permeability versus methane hydrate concentration quite close to that predicted by the Masuda model with N = 15.When the permeability was directly calculated based on Darcy＇s law,the simulation results show a much higher normalized permeability and only show a trend consistent with the experimental results,i.e.,with a permeability plateau,when the methane hydrate crystals are preferentially placed in the tubes,and the higher the preferential probability,the larger the range where the permeability has a plateau.

Characterization and prevention of formation damage for fractured carbonate reservoir formations with low permeability

Stress sensitivity and water blocking in fractured carbonate reservoir formations with low permeability were determined as the main potential damage mechanisms during drilling and completion operations in the ancient buried hill Ordovician reservoirs in the Tarim Basin. Geological structure, lithology, porosity, permeability and mineral components all affect the potential for formation damage. The experimental results showed that the permeability loss was 83.8%-98.6% caused by stress sensitivity, and was 27.9%-48.1% caused by water blocking. Based on the experimental results, several main conclusions concerning stress sensitivity can be drawn as follows： the lower the core permeability and the smaller the core fracture width, the higher the stress sensitivity. Also, stress sensitivity results in lag effect for both permeability recovery and fracture closure. Aimed at the mechanisms of formation damage, a modified low-damage mixed metal hydroxide （MMH） drilling fluid system was developed, which was mainly composed of low-fluorescence shale control agent, filtration control agent, lowfluorescence lubricant and surfactant. The results of experimental evaluation and field test showed that the newly-developed drilling fluid and engineering techniques provided could dramatically increase the return permeability （over 85%） of core samples. This drilling fluid had such advantages as good rheological and lubricating properties, high temperature stability, and low filtration rate （API filtration less than 5 ml after aging at 120 ℃ for 4 hours）. Therefore, fractured carbonate formations with low permeability could be protected effectively when drilling with the newly-developed drilling fluid. Meanwhile, field test showed that both penetration rate and bore stability were improved and the soaking time of the drilling fluid with formation was sharply shortened, indicating that the modified MMH drilling fluid could meet the requirements of drilling engineering and geology.

Influence of strong preformed particle gels on low permeable formations in mature reservoirs

In mature reservoirs,the success of preformed particle gel（PPG） treatment rests primarily on the ability of the PPG to reduce and/or plug the high permeable formations,but not damage the low permeable formations.Static test models（filtration test model and pressure test model）were used to determine the effect of PPG on low permeable formations.This work used a strong preformed particle gel,Daqing（DQ） gel made by a Chinese company.The particle gel sizes were ranged from 30 to 120 mesh for this work.PPGs are sized in a millimeter or micrometer,which can absorb over a hundred times their weight in liquids.The gel strength was approximately 6500 Pa for a completely swollen PPG with 1 %（weight percentage） NaCl solution（brine）.0.05 %,1 %,and 10 % NaCl solutions were used in experiments.Sandstone core permeability was measured before and after PPG treatments.The relationship between cumulative filtration volumes versus filtration times was determined.The results indicate that DQ gels of a particle size of 30–80 mesh did not damage the cores of a low permeability of 3–25 m D.The DQ gels of a smaller particle size ranging from 100 to 120 mesh damaged the core and a cake was formed on the core surface.The results also indicate that more damage occurred when a high load pressure（400 psi） was applied on the high permeability cores（290–310 m D）.The penetration of the particle gelsinto the low permeable formations can be decreased by the best selection of gel types,particle sizes,and brine concentrations.

Reservoir characteristics of Datta Formation (Early Jurassic), Marwat-Khisor Ranges, sub-Himalayas, Pakistan

The present work has been accomplished to carry out a detailed study of the characteristics of the Early Jurassic Datta Formation of Trans-Indus Ranges, Pakistan. The discovery of Saib well-1 (Gas and condensate discovery from Jurassic limestone) in the study basin takes an active interest in carrying out extensive exploration activities in the same basin. Jurassic rocks especially Datta Sandstone and Samana Suk Limestone are acting as good reservoirs. The study unit consists of variegated sandstone interbedded with siltstone, carbonaceous clay, and shale and coal stringer. For the current work, two stratigraphic sections (Pezu and Abbo Wanda) have been measured. To examine its sedimentology, depositional environment, diagenetic settings, and reservoir characteristics, a detailed study was conducted and various laboratory techniques have been utilized. About 95 rock samples from the bottom to the top of both sections were collected, and 50 rock samples have been selected for thin section analysis and were examined under a polarizing microscope to show their mineralogical composition, diagenesis, and their reservoir characteristics. XRD (X-ray diffraction), Cathodoluminescence (CL), SEM (Scanning electron microscope) with EDS (Energy-dispersive spectroscope), and Core plug porosity and permeability analysis have been used to interpret its chemical and mineralogical composition and its reservoir characteristics, respectively. Based on field observations and thin section analysis, four depositional facies and six lithofacies have been established. The sedimentary structures, depositional facies, and lithofacies indicate that Datta Formation was deposited in a deltaic environment. Compactions, cementation, fracturing and dissolution can greatly affect the quality of reservoir rock. Based on thin section and SEM analysis, large numbers of primary pores, fracture and secondary pores were observed and connectivity between the pores is good, and at some places, these pores were filled through the authigenic clay minerals like kaolinite, mixed layers illite/smectite and chlorite that influences the reservoir characteristics. Primary pores (thin section) and secondary pores (dissolution pores) and core plug porosity and permeability data (porosity 13.23%-26.89% and permeability 0.12 to 149 mD) shows that Datta Formation has a good reservoir quality.

Formation mechanism of spheroidal carbide in ultra-low carbon ductile cast iron

The formation mechanism of the spheroidal carbide in the ultra-low carbon ductile cast iron fabricated by the metal mold casting technique was systematically investigated. The results demonstrated that the spheroidal carbide belonged to eutectic carbide and crystallized in the isolated eutectic liquid phase area. The formation process of the spheroidal carbide was related to the contact and the intersection between the primary dendrite and the secondary dendrite of austenite. The oxides of magnesium, rare earths and other elements can act as heterogeneous nucleation sites for the spheroidal carbide. It was also found that the amount of the spheroidal carbide would increase with an increase in carbon content. The cooling rate has an important influence on the spheroidal carbide under the same chemical composition condition.

Evolution features of in-situ permeability of low-maturity shale with the increasing temperature,Cretaceous Nenjiang Formation,northern Songliao Basin,NE China

Temperature-triaxial pressure permeability testing at the axial pressure of 8 MPa and confining pressure of 10 MPa,closed shale system pyrolysis experiment by electrical heating and scanning electron microscopy analysis are used to study the evolution mechanism of in-situ permeability in the direction parallel to bedding of low-maturity shale from Member 2(K_(2)n_(2))of Cretaceous Nenjiang Formation in northern Songliao Basin with mainly Type I kerogen under the effect of temperature.With the increasing temperature,the in-situ permeability presents a peak-valley-peak tendency.The lowest value of in-situ permeability occurs at 375℃.Under the same temperature,the in-situ permeability decreases with the increase of pore pressure.The in-situ permeability evolution of low-maturity shale can be divided into 5 stages:(1)From 25℃to 300℃,thermal cracking and dehydration of clay minerals improve the permeability.However,the value of permeability is less than 0.01×10^(-3)μm^(2).(2)From 300℃to 350℃,organic matter pyrolysis and hydrocarbon expulsion result in mineral intergranular pores and micron pore-fractures,these pores and fractures form an interconnected pore network at limited scale,improving the permeability.But the liquid hydrocarbon,with high content of viscous asphaltene,is more difficult to move under stress and more likely to retain in pores,causing slow rise of the permeability.(3)From 350℃to 375℃,pores are formed by organic matter pyrolysis,but the adsorption swelling of liquid hydrocarbon and additional expansion thermal stress constrained by surrounding stress compress the pore-fracture space,making liquid hydrocarbon difficult to expel and permeability reduce rapidly.(4)From 375℃to 450℃,the interconnected pore network between different mineral particles after organic matter conversion,enlarged pores and transformation of clay minerals promote the permeability to increase constantly even under stress constraints.(5)From 450℃to 500℃,the stable pore system and crossed fracture system in different bedding directions significantly enhance the permeability.The organic matter pyrolysis,pore-fracture structure and surrounding stress in the different stages are the key factors affecting the evolution of in-situ permeability.

Diagenesis-porosity evolution and“sweet spot”distribution of low permeability reservoirs:A case study from Oligocene Zhuhai Formation in Wenchang A sag,Pear River Mouth Basin,northern South China Sea

The characteristics of low permeability reservoirs and distribution of sweet spots in the Oligocene Zhuhai Formation of Wenchang A sag, Pearl River Basin were investigated by core observation and thin section analysis. The study results show that there develop the fine, medium and coarse sandstone reservoirs of tidal flat–fan delta facies, which are of mostly low permeability and locally medium permeability. There are two kinds of pore evolution patterns: oil charging first and densification later, the reservoirs featuring this pattern are mainly in the third member of Zhuhai Formation between the south fault zone and the sixth fault zone, and the pattern of densification first and gas charging later is widespread across the study area. Strong compaction and local calcium cementation are the key factors causing low permeability of the reservoirs in the Zhuhai Formation. Thick and coarse grain sand sedimentary body is the precondition to form "sweet spot" reservoirs. Weak compaction and cementation, dissolution, early hydrocarbon filling and authigenic chlorite coating are the main factors controlling formation of "sweet spot" reservoir. It is predicted that there develop between the south fault and sixth fault zones the Class Ⅰ "sweet spot" in medium compaction zone, Class Ⅱ "sweet spot" in nearly strong compaction zone, Class Ⅲ "sweet spot" reservoir in the nearly strong to strong compaction zone with oil charging at early stage, and Class IV "sweet spot" reservoir in the strong compaction and authigenic chlorite coating protection zone in the sixth fault zone.

Genesis of the low-permeability reservoir bed of upper Triassic Xujiahe Formation in Xinchang gas field,western Sichuan Depression

The genesis of a reservoir is a result of the combined action of deposition, diagenesis, tectonic reworking, and interaction of rock and fluid and the evolutionary environment. We discuss the genetic and evolution mechanism of a low-permeability reservoir bed of the Xujiahe Formation in the western Sichuan Depression on the basis of the study of diagenesis, diagenetic reservoir facies and the diagenetic evolution sequence. The research indicated that this reservoir bed can be divided into five types of diagenetic reservoir facies, namely strong dissolution, chlorite-lined intergranular pores, compaction and pressure solution, carbonate cementation and secondary quartz increase. There are, however, just two diagenetic reservoir facies which provide low-permeability reservoir beds, namely strong dissolution and chlorite-lined intergranular pores. We also analyzed their diagenetic evolution sequences and the origin of the low-permeability reservoir bed. Besides, it was also indicated that the composition and structure of sandstones, types of sedimentary microfacies, diagenesis history as well as the tectonic reworking in later periods are the main factors controlling the formation of the low-permeability reservoir bed. The above- mentioned factors establish the foundation for the forecasting the distribution of high quality reservoir beds.

Diagenesis characteristics and their influence on porosity and permeability of sandstone from Yingcheng Formation in Jinshan field

In order to understand the diagenesis and its influence on porosity and permeability of sandstones from Yingcheng Formation in Jinshan field,applying thin sections,casting and scanning electron microscope,the authors studied petrography,diagenesis,porosity and permeability of Yingcheng Formation sandstone reservoir. The results show that the reservoir of Yingcheng Formation is mainly composed of lithic arkoses. Sandstones experienced compaction,pressolution,cementation,metasomatism and dissolution. The primary pores of the sandstones are undeveloped; most of pores are the secondary pores,which are mainly intragranular dissolution pores in feldspar and debris. The compaction and cementation reduced the primary pores in sandstones,the porosity and permeability decreased; while the dissolution formed the secondary pores,resulting in the porosity and permeability increase. Due to compaction and cementation,the porosity and permeability are reduced with increasing of depth. There exists an abnormal enlargement of porosity and permeability within a depth range 2310--2450 m. In combination with analysis of petrology,the dissolution of feldspar and debris is most developed in the depth range. Therefore,compaction,cementation and dissolution are the important factors which affect the porosity and permeability of sandstones.

Formation damage control of high permeability sandstone reservoir

The concern on formation damage control of high permeability sandstone reservoir has been growing in oil industry in recent years. The invasion of particles and the filtrate of drilling fluid are proven as one of the key factors accounting for reservoir damage. Based on the ideal packing theory, the practical software has been developed to optimize the blending proportion of several bridging agents, and the core flooding tests were conducted to evaluate return permeability of core samples contaminated with different drilling fluids. Experimental results show that the ideal packing approach can reduce the dynamic filtration rate, improve the return permeability and drawdown the breakthrough pressure, indicating that this kind of drilling fluids can meet the demands of formation damage control for high permeability sandstone reservoirs. Some applying procedures for formation damage control are also proposed in this paper.

Profile improvement during CO_2 flooding in ultra-low permeability reservoirs

Gas flooding such as CO2 flooding may be effectively applied to ultra-low permeability reservoirs, but gas channeling is inevitable due to low viscosity and high mobility of gas and formation heterogeneity. In order to mitigate or prevent gas channeling, ethylenediamine is chosen for permeability profile control. The reaction mechanism of ethylenediamine with CO2, injection performance, swept volume, and enhanced oil recovery were systematically evaluated. The reaction product of ethylenediamine and CO2 was a white solid or a light yellow viscous liquid, which would mitigate or prevent gas channeling. Also, ethylenediamine could be easily injected into ultra-low permeability cores at high temperature with protective ethanol slugs. The core was swept by injection of 0.3 PV ethylenediamine. Oil displacement tests performed on heterogeneous models with closed fractures, oil recovery was significantly enhanced with injection of ethylenediamine. Experimental results showed that using ethylenediamine to plug high permeability layers would provide a new research idea for the gas injection in fractured, heterogeneous and ultra-low permeability reservoirs. This technology has the potential to be widely applied in oilfields.

The tectonic fracture modeling of an ultra-low permeability sandstone reservoir based on an outcrop analogy: A case study in the Wangyao Oilfield of Ordos Basin, China

Due to inherent limits of data acquisition and geophysical data resolution, there are large uncertainties in the characterization of subsurface fractures. However, outcrop analogies can provide qualitative and quantitative information on a large number of fractures, based on which the accuracy of subsurface fracture characterization can be improved. Here we take the tectonic fracture modeling of an ultra-low permeability sandstone reservoir based on an outcrop analogy, a case study of the Chang6t~ Formation of the Upper Triassic Yanchang Group of the Wangyao Oilfield in the Ordos Basin of China. An outcrop at the edge of the basin is a suitable analog for the reservoir, but the prerequisite is that they must have equivalent previous stress fields, similar final structural characteristics, relative timing and an identical depositional environment and diagenesis. The relationship among fracture density, rock type and bed thickness based on the outcrop is one of the most important fracture distribution models, and can be used to interpret fracture density in individual wells quantitatively. Fracture orientation, dip, geometry and scale, also should be described and measured in the outcrop, and can be used together with structure restoration and single well fracture density interpretation to guide fracture intensity prediction on bed surfaces and to constrain the construction of the 3D fracture geometry model of the subsurface reservoir. The application of the above principles shows the outcrop-based tectonic fracture models of the target ultra-low permeability sandstone reservoir are consistent with fractures inferred from microseismic interpretation and tracer tests. This illustrated that the fracture modeling based on the outcrop analogy is reliable and can reduce the uncertainty in stochastic fracture modeling.

Petrophysical and capillary pressure properties of the upper Triassic Xujiahe Formation tight gas sandstones in western Sichuan,China

The tight sandstones of the Upper Triassic Xujiahe Formation（T_3x） constitute important gas reservoirs in western Sichuan.The Xujiahe sandstones are characterized by low to very low porosity （av.5.22%and 3.62%） for the T_3x^4 and T_3x^2 sandstones,respectively）,extremely low permeability（av. 0.060 mD and 0.058 mD for the T_3x^4 and T_3x^2 sandstones,respectively）,strong heterogeneity,micronano pore throat,and poor pore throat sorting.As a result of complex pore structure and the occurrence of fractures,weak correlations exist between petrophysical properties and pore throat size,demonstrating that porosity or pore throat size alone does not serve as a good permeability predictor.Much improved correlations can be obtained between permeability and porosity when pore throat radii are incorporated. Correlations between porosity,permeability,and pore throat radii corresponding to different saturations of mercury were established,showing that the pore throat radius at 20%mercury saturation（R_（20）） is the best permeability predictor.Multivariate regression analysis and artificial neural network（ANN） methods were used to establish permeability prediction models and the unique characteristics of neural networks enable them to be more successful in predicting permeability than the multivariate regression model.In addition, four petrophysical rock types can be identified based on the distributions of R_（20）,each exhibiting distinct petrophysical properties and corresponding to different flow units.

Anisotropic Rock Poroelasticity Evolution in Ultra-low Permeability Sandstones under Pore Pressure,Confining Pressure,and Temperature:Experiments with Biot's Coefficient

This study aimed to show anisotropic poroelasticity evolution in ultra-low permeability reservoirs under pore pressure,confining pressure,and temperature.Several groups of experiments examining Biot's coefficient under different conditions were carried out.Results showed that Biot's coefficient decreased with increased pore pressure,and the variation trend is linear,but the decreasing rate is variable between materials.Biot's coefficient increased with increased confining pressure;the variation trend is linear,but the increasing rate varies by material as well.Generally,Biot's coefficient remains stable with increased temperature.Lithology,clay mineral content,particle arrangement,and pore arrangement showed impacts on Biot's coefficient.For strong hydrophilic clay minerals,expansion in water could result in a strong surface adsorption reaction,which could result in an increased fluid bulk modulus and higher Biot's coefficient.For skeleton minerals with strong lipophilicity,such as quartz and feldspar,increased oil saturation will also result in an adsorption reaction,leading to increased fluid bulk modulus and a higher Biot's coefficient.The study's conclusions provide evidence of poroelasticity evolution of ultra-low permeability and help the enhancing oil recovery(EOR)process.

On the Development of an Effective Pressure Driving System for Ultra-Low Permeability Reservoirs

Given its relevance to the exploitation of ultra-low permeability reservoirs,which account for a substantial proportion of the world’s exploited and still unexploited reserves,in the present study the development of an adequate water injection system is considered.Due to the poor properties and weak seepage capacity of these reservoirs,the water injection pressure typically increases continuously during water flooding.In this research,the impact on such a process of factors as permeability,row spacing,and pressure gradient is evaluated experimentally using a high-pressure large-scale outcrop model.On this basis,a comprehensive evaluation coefficient is introduced able to account for the effective driving pressure.

Determination of microscopic waterflooding characteristics and influence factors in ultra-low permeability sandstone reservoir

Actual sandstone micromodel was used in this work to conduct the microscopic waterflooding experiment of ultra-low sandstone reservoir,since the inside seepage characteristics of microscopic waterflooding process of Chang 8 ultra-low permeability sandstone reservoir of Upper Triassic Yanchang formation in Huaqing region of the Ordos Basin,China is difficult to observe directly.Combined with physical property,casting thin sections,constant-rate mercury injection capillary pressure and nuclear magnetic resonance,the influence of reservoir property on the waterflooding characteristics in pores were analyzed and evaluated.Seepage paths of waterflooding characteristics were divided into four types:homogeneous seepage,reticular-homogeneous seepage,finger-reticular seepage and finger-like seepage,the waterflooding efficiency of which decreases in turn.More than 70%of residual oil occurs as flowing-around seepage and oil film.Physical property,pore structure and movable fluid characteristics are all controlled by digenesis and their impacts on waterflooding efficiency are in accordance.Generally,the pore throat radius size and distribution and movable fluid percentage are closely related to waterflooding law.