Optimization of Gas-Flooding Fracturing Development in Ultra-Low Permeability Reservoirs

Ultra-low permeability reservoirs are characterized by small pore throats and poor physical properties, which areat the root of well-known problems related to injection and production. In this study, a gas injection floodingapproach is analyzed in the framework of numerical simulations. In particular, the sequence and timing of fracturechanneling and the related impact on production are considered for horizontal wells with different fracturemorphologies. Useful data and information are provided about the regulation of gas channeling and possible strategiesto delay gas channeling and optimize the gas injection volume and fracture parameters. It is shown that inorder to mitigate gas channeling and ensure high production, fracture length on the sides can be controlled andlonger fractures can be created in the middle by which full gas flooding is obtained at the fracture location in themiddle of the horizontal well. A Differential Evolution (DE) algorithm is provided by which the gas injectionvolume and the fracture parameters of gas injection flooding can be optimized. It is shown that an improvedoil recovery factor as high as 6% can be obtained.

Method of moderate water injection and its application in ultra-low permeability oil reservoirs of Yanchang Oilfield, NW China

To explore the method of improving development effect and solving the problem of water breakthrough and water out for ultralow permeability fractured reservoirs, an indoor evaluation method of dynamic imbibition for fracture-matrix system was established taking the Chang 8 reservoir in southern Yanchang Oilfield as a research target. Key factors for the imbibition effect were obtained, an imbibition's rate expression was obtained, a model considering the double effects of imbibition-displacement was built and optimal injection and production parameters for the research area were obtained as well. The results show that an optimum displacement rate that maximizes the oil displacement efficiency exists in the water displacing oil process, and the optimal displacing rate becomes smaller as the permeability decreases. The imbibition displacement efficiency increases as the reservoir quality index and water wettability index of rock become bigger. But the larger the initial water saturation or oil-water viscosity ratio is, the smaller the imbibition displacement efficiency is. The optimal injection-production ratio for the Chang 8 reservoir of southern Yanchang Oilfield is 0.95, and the predicted recovery is 17.2% when the water cut is 95%, it is 2.9% higher than the recovery of conventional injection-production ratio 1.2. By using the moderate water injection technique based on the double effects of imbibition-displacement mechanism, the water injection development effect for the ultra-low permeability fractured reservoirs can be improved significantly.

A quantitative evaluation for well pattern adaptability in ultra-low permeability oil reservoirs:A case study of Triassic Chang 6 and Chang 8 reservoirs in Ordos Basin

Based on the previous studies and development practice in recent 10 years, a quantitative evaluation method for the adaptability of well patterns to ultra-low permeability reservoirs was established using cluster analysis and gray correlation method, and it includes 10 evaluation parameters in the four aspects of optimal evaluation parameters, determination of weights for evaluation parameters, development stage division, and determination of classification coefficients. This evaluation method was used to evaluate the well pattern adaptability of 13 main ultra-low permeability reservoirs in Triassic Chang 6 and Chang 8 of Ordos Basin. Three basic understandings were obtained: Firstly, the well pattern for ultra-low permeability type-I reservoirs has generally good adaptability, with proper well pattern forms and well pattern parameters. Secondly, square inverted nine-spot well pattern is suitable for reservoirs with no fractures; rhombic inverted nine-spot injection pattern is suitable for reservoirs with some fractures; and rectangular well pattern is suitable for reservoirs with rich fractures. Thirdly, for the ultra-low permeability type-Ⅱ and type-Ⅲ reservoirs, with the principles of well pattern form determination, the row spacing needs to be optimized further to improve the level of development of such reservoirs.

Profile improvement during CO_2 flooding in ultra-low permeability reservoirs

Gas flooding such as CO2 flooding may be effectively applied to ultra-low permeability reservoirs, but gas channeling is inevitable due to low viscosity and high mobility of gas and formation heterogeneity. In order to mitigate or prevent gas channeling, ethylenediamine is chosen for permeability profile control. The reaction mechanism of ethylenediamine with CO2, injection performance, swept volume, and enhanced oil recovery were systematically evaluated. The reaction product of ethylenediamine and CO2 was a white solid or a light yellow viscous liquid, which would mitigate or prevent gas channeling. Also, ethylenediamine could be easily injected into ultra-low permeability cores at high temperature with protective ethanol slugs. The core was swept by injection of 0.3 PV ethylenediamine. Oil displacement tests performed on heterogeneous models with closed fractures, oil recovery was significantly enhanced with injection of ethylenediamine. Experimental results showed that using ethylenediamine to plug high permeability layers would provide a new research idea for the gas injection in fractured, heterogeneous and ultra-low permeability reservoirs. This technology has the potential to be widely applied in oilfields.

Advances in enhanced oil recovery technologies for low permeability reservoirs

Low permeability oil and gas resources are rich and have great potential all over the world, which has gradually become the main goal of oil and gas development. However, after traditional primary and secondary exploitation, there is still a large amount of remaining oil that has not been recovered.Therefore, in recent years, enhanced oil recovery(EOR) technologies for low permeability reservoirs have been greatly developed to further improve crude oil production. This study presents a comprehensive review of EOR technologies in low permeability reservoirs with an emphasis on gas flooding, surfactant flooding, nanofluid flooding and imbibition EOR technologies. In addition, two kinds of gel systems are introduced for conformance control in low permeability reservoirs with channeling problems. Finally,the technical challenges, directions and outlooks of EOR in low permeability reservoirs are addressed.

Imbibition mechanisms of high temperature resistant microemulsion system in ultra-low permeability and tight reservoirs

Lower-phase microemulsions with core-shell structure were prepared by microemulsion dilution method.The high temperature resistant systems were screened and the performance evaluation experiments were conducted to clarify the spontaneous imbibition mechanisms in ultra-low permeability and tight oil reservoirs,and to direct the field microfracture huff and puff test of oil well.The microemulsion system(O-ME)with cationic-nonionic surfactant as hydrophilic shell,No.3 white oil as oil phase core has the highest imbibition recovery;its spontaneous imbibition mechanisms include:the ultra-low interfacial tension and wettability reversal significantly reduce oil adhesion work to improve oil displacement efficiency,the nanoscale“core-shell structure”formed can easily enter micro-nano pores and throats to expand the swept volume,in addition,the remarkable effect of dispersing and solubilizing crude oil can improve the mobility of crude oil.Based on the experimental results,a microfracture huff and puff test of O-ME was carried out in Well YBD43-X506 of Shengli Oilfield.After being treated,the well had a significant increase of daily fluid production to 5 tons from 1.4 tons,and an increase of daily oil production to 2.7 tons from 1.0 ton before treatment.

Sediment permeability change on natural gas hydrate dissociation induced by depressurization

The permeability of a natural gas hydrate reservoir is a critical parameter associated with gas hydrate production.Upon producing gas from a hydrate reservoir via depressurization,the permeability of sediments changes in two ways with hydrate dissociation,increasing with more pore space released from hydrate and decreasing due to pore compression by stronger effective stress related to depressurization.In order to study the evolution of sediment permeability during the production process with the depressurization method,an improved pore network model(PNM)method is developed to establish the permeability change model.In this model,permeability change induced by hydrate dissociation is investigated under hydrate occurrence morphology of pore filling and grain coating.The results obtained show that hydrate occurrence in sediment pore is with significant influence on permeability change.Within a reasonable degree of pore compression in field trial,the effect of pore space release on the reservoir permeability is greater than that of pore compression.The permeability of hydrate containing sediments keeps increasing in the course of gas production,no matter with what hydrate occurrence in sediment pore.

Development of the theory and technology for low permeability reservoirs in China

The development theories of low-permeability oil and gas reservoirs are refined, the key development technologies are summarized, and the prospect and technical direction of sustainable development are discussed based on the understanding and research on developed low-permeability oil and gas resources in China. The main achievements include:(1) the theories of low-permeability reservoir seepage, dual-medium seepage, relative homogeneity, etc.(2) the well location optimization technology combining favorable area of reservoir with gas-bearing prediction and combining pre-stack with post-stack;(3) oriented perforating multi-fracture, multistage sand adding, multistage temporary plugging, vertical well multilayer, horizontal and other fracturing techniques to improve productivity of single well;(4) the technology of increasing injection and keeping pressure, such as overall decreasing pressure, local pressurization, shaped charge stamping and plugging removal, fine separate injection, mild advanced water injection and so on;(5) enhanced recovery technology of optimization of injection-production well network in horizontal wells. To continue to develop low-permeability reserves economically and effectively, there are three aspects of work to be done well:(1) depending on technical improvement, continue to innovate new technologies and methods, establish a new mode of low quality reservoir development economically, determine the main technical boundaries and form replacement technology reserves of advanced development;(2) adhering to the management system of low cost technology & low cost, set up a complete set of low-cost dual integration innovation system through continuous innovation in technology and management;(3) striving for national preferential policies.

Experimental Evaluation of the Mobility Profile of Enhanced Oil Recovery Gases

The mobility profiles of gases used in enhanced oil recovery (EOR) have been thoroughly investigated through the coupling operations of data mining of oilfield data and experimental data analyses. Mobility as an EOR objective function has not been previously applied to characterize potential reservoirs for EOR selection and application, even though it is a robust combinatorial function that benefits from two petrophysical variables, permeability and viscosity. The data mining approach identified mobility as a reliable objective function for reservoir characterisation. The data distribution and clustering results indicate that Gas EOR reservoirs have relatively higher mean mobility than Thermal, Microbial and Chemical EOR reservoirs. The experimental approach investigated EOR gases, CO2, CH4, N2, and Air. A modified Darcy Equation of State for gas flow through porous media was applied to evaluate which gas would competitively attain the oil displacement optimisation criterion for mobility ratio, M ≤ 1. Coupling the data mining with the experimental data results reveals that gas reservoirs can be further categorized by mobility. CH4 (18.16 mD/cp) was observed to have the highest mobility followed by Air (14.60 mD/cp), N2 (13.61 mD/cp), and CO2 (12.96 mD/cp). The gas mobility order significantly corresponds with the mobility distribution of reservoirs that implemented gas EOR processes. It was concluded that CO2 offers relatively lower mobility, therefore, it is the most competitive EOR gas to approach the mobility ratio criterion of unity or less.

INVESTIGATION AND APPLICATION ON GAS-DRIVE DEVELOPMENT IN ULTRA-LOW PERMEABILITY RESERVOIRS

To select a proper displacement medium with the purpose of developing ultra-low permeability reservoirs both effectively and economically, three kinds of gases, including CO2, NG and N2, are studied through physical modeling and numerical simulation under the specified reservoir conditions. The results indicate that the oil recovery through water injection is relatively low in ultra-low permeability reservoirs, where the water breaks through early and the water cut rises rapidly. Gas injection can enhance the production, of which the gas-drive efficiency depends on the injection pressure and the gas itself. CO2 is proved to be the best one after comprehensive consideration of the recovery speed, the overall recovery efficiency and the time needed for gas to break through. The pressure of CO2 injection in the field experiments is lower, compared with that of water-drive. The injectivity index of CO2 is 7.2 times as high as that of water, and the oil production of the test well group increases by about 4 t/d.

Geologic characteristics, controlling factors and hydrocarbon accumulation mechanisms of China’s Large Gas Provinces of low porosity and permeability

Based on the analysis of the geological characteristics and controlling factors, we analyzed the formation mechanism of different types of gas reservoirs. The main characteristics of gas provinces with low porosity and permeability are mainly as follows: large area, low abundance, small gas pools and large gas provinces; widely distributed excellent hydrocarbon source rocks with closely contacted source-reservoir-cap association; development mainly in large continental depressions or in paralic shallow-river delta systems; many kinds of traps coexisting in large areas, dominantly para-layered lithologic, digenetic and capillary pressure traps; double fluid flow mechanisms of Darcy flow and non-Darcy flow; complicated gas and water relations; and having the resource distribution of highly productive "sweet spots", banding concentration, and macroscopically large areas integrated. The main controlling factors of large sandstone gas provinces with low porosity and permeability are stable dynamic backgrounds and gentle structural frameworks which control the extensive distribution of alternate (interbedded) sandstones and mudstones; weak hydropower of large gentle lake basins controlling the formation of discontinuous, low porosity and permeability reservoirs in shallow-water deltas; regionally differential diagenesis and no homogeneous digenetic facies controlling the development of favorable reservoirs and digenetic traps; and weak and dispersive reservoir-forming dynamic forces leading to the widely distributed small traps with low abundance. Low porosity and permeability gas provinces with different trap types have different formation mechanisms which include fluid diversion pressure difference interactive mechanism of lithologic-trap gas accumulations, separated differential collection mechanism of digenetic-trap gas accumulations, and the Non-Darcy flow mechanism of capillary-pressure gas accumulations.

Characteristics of petroleum accumulation in syncline of the Songliao basin and discussion on its accumulation mechanism

The relation between oil and water in reservoirs with low and ultra-low permeability is very complicated. Gravitational separation of oil and water is not obvious. Normal reservoirs are located in depression and structural high spot, oil and water transitions are located in their middle. Stagnation is the key fact of oil-forming reservoir in the axis of a syncline based on the research of oil, gas and water migration manner, dynamics and non-Darcy flow in the Songliao basin. In low and ultra-low permeable reservoir, gas and water migrate easily through pore throats because their molecules are generally smaller than the pore throats; but the minimum diameter of oil droplets is larger than pore throats and they must be deformed to go through. Thus, gas and water migrate in advance of oil, and oil droplets remain behind. Pressure differential and the buoyancy force in a syncline reservoir are a main fluid driving force; and capillary force is the main resistance to flow. When the dynamics force is less than resistance, oil is immobile. When the buoyancy force is less than the capillary force, a gravitational separation of oil and water does not occur. The reservoir in the mature source rock of a syncline area with the low and ul- tra-low permeability belongs to an unconventional petroleum reservoir.