We propose and demonstrate a novel single-longitudinal-mode(SLM) erbium-doped fiber laser(EDFL) capable of operating at fixed-wavelength lasing mode with a tunable range more than 54 nm, an ultra-narrow linewidth of 4...We propose and demonstrate a novel single-longitudinal-mode(SLM) erbium-doped fiber laser(EDFL) capable of operating at fixed-wavelength lasing mode with a tunable range more than 54 nm, an ultra-narrow linewidth of 473 Hz and an ultra-high optical signal-to-noise ratio(OSNR) more than 72 dB, or operating at wavelength-swept mode with tunable sweep rate of 10—200 Hz and a sweep range more than 50 nm. The excellent features mainly benefit from a triple-ring subring cavity constructed by three optical couplers nested one another and a fiber Fabry-Pérot tunable filter which can be driven by a constant voltage or a periodic sweep voltage for fixed or wavelength-swept operation, respectively. The proposed EDFL has potential applications in high-resolution spectroscopy and fiber optic sensing.展开更多
Optically pumped lasers based on solution-processed thin-film gain media have recently emerged as low-cost,broadly tunable,and versatile active photonics components that can fit any substrate and are useful for,e.g.,c...Optically pumped lasers based on solution-processed thin-film gain media have recently emerged as low-cost,broadly tunable,and versatile active photonics components that can fit any substrate and are useful for,e.g.,chemo-or biosensing or visible spectroscopy.Although single-mode operation has been demonstrated in various resonator architectures with a large variety of gain media-including dye-doped polymers,organic semiconductors,and,more recently,hybrid perovskites-the reported linewidths are typically on the order of a fraction of a nanometer or broader,i.e.,the coherence lengths are no longer than a few millimeters,which does not enable high-resolution spectroscopy or coherent sensing.The linewidth is fundamentally constrained by the short photon cavity lifetime in the standard resonator geometries.We demonstrate here a novel structure for an organic thin-film solid-state laser that is based on a vertical external cavity,wherein a holographic volume Bragg grating ensures both spectral selection and output coupling in an otherwise very compact(,cm3)design.Under short-pulse(0.4 ns)pumping,Fourier-transform-limited laser pulses are obtained,with a full width at half-maximum linewidth of 900 MHz(1.25 pm).Using 20-ns-long pump pulses,the linewidth can be further reduced to 200 MHz(0.26 pm),which is four times above the Fourier limit and corresponds to an unprecedented coherence length of 1m.The concept is potentially transferrable to any type of thin-film laser and can be ultimately made tunable;it also represents a very compact alternative to bulky grating systems in dye lasers.展开更多
The successful confinement of the arc by the flux band depends on the welding process parameters for achieving single-pass,multi-layer, and ultra-narrow gap welding. The sidewall fusion depth, the width of the heat-af...The successful confinement of the arc by the flux band depends on the welding process parameters for achieving single-pass,multi-layer, and ultra-narrow gap welding. The sidewall fusion depth, the width of the heat-affected zone, and the line energy are utilized as comprehensive indications of the quality of the welded joint. In order to achieve well fusion and reduce the heat input to the base metal.Three welding process characteristics were chosen as the primary determinants, including welding voltage, welding speed, and wire feeding speed. The metamodel of the welding quality index was built by the orthogonal experiments. The metamodel and NSGA-Ⅱ(Non-dominated sorting genetic algorithm Ⅱ) were combined to develop a multi-objective optimization model of ultra-narrow gap welding process parameters. The results showed that the optimized welding process parameters can increase the sidewall fusion depth, reduce the width of the heataffected zone and the line energy, and to some extent improve the overall quality of the ultra-narrow gap welding process.展开更多
The linewidths of InGaAs-GaAs-AlGaAs DBR lasers with varied DBR dimensional parameters are measured and analyzed. These lasers were built with different DBR grating lengths and depths in order to explore the effect of...The linewidths of InGaAs-GaAs-AlGaAs DBR lasers with varied DBR dimensional parameters are measured and analyzed. These lasers were built with different DBR grating lengths and depths in order to explore the effect of the size of the DBR on its coupling coefficient and reflectivity,and hence on the linewidth of the laser diodes. The linewidths were measured by employing a self heterodyne linewidth measurement system. The experimental and calculated data for DBR reflectivity and spectral linewidth are given. The relationship between these data and the dimensions of the DBR is analyzed. Based on this analysis,the effect of the DBR geometry on the linewidth of the lasers is explored. The results give useful information related to the design and fabrication of such DBR lasers.展开更多
A widely-wavelength-tunable Brillouin fiber laser(BFL)with improved optical signal-to-noise ratio(OSNR)based on parity-time(PT)symmetric and saturable absorption(SA)effect is present.This novel BFL realizes PT symmetr...A widely-wavelength-tunable Brillouin fiber laser(BFL)with improved optical signal-to-noise ratio(OSNR)based on parity-time(PT)symmetric and saturable absorption(SA)effect is present.This novel BFL realizes PT symmetry and SA effect through polarization-maintaining erbium-doped fiber(PM-EDF)Sagnac loop,which is composed of a PM-EDF,a coupler and two polarization controllers(PCs).By using the inherent birefringence characteristic of PM-EDF,two feedback loops in orthogonal polarization state are formed when the Strokes signal in injected.One of these loops provides gain in the clockwise direction with in the Sagnac loop,while the other loop generates loss in the counterclockwise direction.By adjusting the PCs to control the polarization state of the PM-EDF,a single-longitudinal-mode(SLM)BFL can be achieved,as the PT symmetry is broken when the SA participating stimulated Brillouin scattering(SBS)gain and loss are well-matched and the gain surpasses the coupling coefficient.Compared to previous BFLs,the proposed BFL has a more streamlined structure and a wider wavelength tunable range,at the same time,it is not being limited by the bandwidth of the erbium-doped fiber amplifier while still maintaining narrow linewidth SLM output.Additionally,thanks to SA effect of the PM-EDF,the PT symmetric SBS gain contract is enhanced,resulting in a higher optical signal-to-noise(OSNR).The experimental results show that the laser has a wide tunable range of 1526.088 nm to 1565.498 nm,an improved OSNR of 77 dB,and a fine linewidth as small as 140.5 Hz.展开更多
基金supported by the Natural Science Foundation of Hebei Province(No.F2016201023)the Technology Foundation for Selected Overseas Chinese Scholar of Ministry of Human Resources and Social Security of China(No.CG2015003006)the Advanced Talents Program of Hebei Educational Committee(No.GCC2014020)
文摘We propose and demonstrate a novel single-longitudinal-mode(SLM) erbium-doped fiber laser(EDFL) capable of operating at fixed-wavelength lasing mode with a tunable range more than 54 nm, an ultra-narrow linewidth of 473 Hz and an ultra-high optical signal-to-noise ratio(OSNR) more than 72 dB, or operating at wavelength-swept mode with tunable sweep rate of 10—200 Hz and a sweep range more than 50 nm. The excellent features mainly benefit from a triple-ring subring cavity constructed by three optical couplers nested one another and a fiber Fabry-Pérot tunable filter which can be driven by a constant voltage or a periodic sweep voltage for fixed or wavelength-swept operation, respectively. The proposed EDFL has potential applications in high-resolution spectroscopy and fiber optic sensing.
基金the Agence Nationale de la Recherche(grant ANR-12-EMMA-0040‘‘Vecspresso’’project)the Region Ile de France(DIMNano’K)the LABEX SEAM for funding this work.
文摘Optically pumped lasers based on solution-processed thin-film gain media have recently emerged as low-cost,broadly tunable,and versatile active photonics components that can fit any substrate and are useful for,e.g.,chemo-or biosensing or visible spectroscopy.Although single-mode operation has been demonstrated in various resonator architectures with a large variety of gain media-including dye-doped polymers,organic semiconductors,and,more recently,hybrid perovskites-the reported linewidths are typically on the order of a fraction of a nanometer or broader,i.e.,the coherence lengths are no longer than a few millimeters,which does not enable high-resolution spectroscopy or coherent sensing.The linewidth is fundamentally constrained by the short photon cavity lifetime in the standard resonator geometries.We demonstrate here a novel structure for an organic thin-film solid-state laser that is based on a vertical external cavity,wherein a holographic volume Bragg grating ensures both spectral selection and output coupling in an otherwise very compact(,cm3)design.Under short-pulse(0.4 ns)pumping,Fourier-transform-limited laser pulses are obtained,with a full width at half-maximum linewidth of 900 MHz(1.25 pm).Using 20-ns-long pump pulses,the linewidth can be further reduced to 200 MHz(0.26 pm),which is four times above the Fourier limit and corresponds to an unprecedented coherence length of 1m.The concept is potentially transferrable to any type of thin-film laser and can be ultimately made tunable;it also represents a very compact alternative to bulky grating systems in dye lasers.
基金Project was supported by National Natural Science Foundation of China(Grant No.62173170).
文摘The successful confinement of the arc by the flux band depends on the welding process parameters for achieving single-pass,multi-layer, and ultra-narrow gap welding. The sidewall fusion depth, the width of the heat-affected zone, and the line energy are utilized as comprehensive indications of the quality of the welded joint. In order to achieve well fusion and reduce the heat input to the base metal.Three welding process characteristics were chosen as the primary determinants, including welding voltage, welding speed, and wire feeding speed. The metamodel of the welding quality index was built by the orthogonal experiments. The metamodel and NSGA-Ⅱ(Non-dominated sorting genetic algorithm Ⅱ) were combined to develop a multi-objective optimization model of ultra-narrow gap welding process parameters. The results showed that the optimized welding process parameters can increase the sidewall fusion depth, reduce the width of the heataffected zone and the line energy, and to some extent improve the overall quality of the ultra-narrow gap welding process.
文摘The linewidths of InGaAs-GaAs-AlGaAs DBR lasers with varied DBR dimensional parameters are measured and analyzed. These lasers were built with different DBR grating lengths and depths in order to explore the effect of the size of the DBR on its coupling coefficient and reflectivity,and hence on the linewidth of the laser diodes. The linewidths were measured by employing a self heterodyne linewidth measurement system. The experimental and calculated data for DBR reflectivity and spectral linewidth are given. The relationship between these data and the dimensions of the DBR is analyzed. Based on this analysis,the effect of the DBR geometry on the linewidth of the lasers is explored. The results give useful information related to the design and fabrication of such DBR lasers.
文摘A widely-wavelength-tunable Brillouin fiber laser(BFL)with improved optical signal-to-noise ratio(OSNR)based on parity-time(PT)symmetric and saturable absorption(SA)effect is present.This novel BFL realizes PT symmetry and SA effect through polarization-maintaining erbium-doped fiber(PM-EDF)Sagnac loop,which is composed of a PM-EDF,a coupler and two polarization controllers(PCs).By using the inherent birefringence characteristic of PM-EDF,two feedback loops in orthogonal polarization state are formed when the Strokes signal in injected.One of these loops provides gain in the clockwise direction with in the Sagnac loop,while the other loop generates loss in the counterclockwise direction.By adjusting the PCs to control the polarization state of the PM-EDF,a single-longitudinal-mode(SLM)BFL can be achieved,as the PT symmetry is broken when the SA participating stimulated Brillouin scattering(SBS)gain and loss are well-matched and the gain surpasses the coupling coefficient.Compared to previous BFLs,the proposed BFL has a more streamlined structure and a wider wavelength tunable range,at the same time,it is not being limited by the bandwidth of the erbium-doped fiber amplifier while still maintaining narrow linewidth SLM output.Additionally,thanks to SA effect of the PM-EDF,the PT symmetric SBS gain contract is enhanced,resulting in a higher optical signal-to-noise(OSNR).The experimental results show that the laser has a wide tunable range of 1526.088 nm to 1565.498 nm,an improved OSNR of 77 dB,and a fine linewidth as small as 140.5 Hz.
