Efficacy of surgical resection and ultra-reduced tension suture combined with superficial radiation in keloid treatment

BACKGROUND There are many available treatment options for keloid;however,single treatments are usually less effective.Therefore,more scientifically rational and effective com-bined treatment methods should be sought to solve the pain associated with keloids.AIM To explore the efficacy and safety of surgical resection and ultra-reduced tension suture combined with superficial radiation as keloid treatment.METHODS Fifteen keloid patients admitted to Qingdao Eighth People's Hospital from June 2020 to January 2022 were enrolled in this retrospective analysis.All patients underwent a comprehensive treatment approach comprising surgical resection,ultra-reduced tension suture incision,and superficial radiation therapy within 24 h postoperatively.The modified Vancouver Scar Scale(mVSS)and Patient and Observer Scar Assessment Scale(POSAS)were used to evaluate the treatment effect,whereas the efficacy,adverse effects,and recurrence rate were observed according to the 12-mo follow-up after treatment.RESULTS The mVSS and POSAS scores at 1 and 6 mo after combination treatment decreased compared to before treatment(P<0.001),and the overall response rate was 93.3%.Only one case recurred,yielding a 6.7%recurrence rate.The incidence of local chromour sedimentation rate in 1–3 mo after radiotherapy was 33.3%(5 patients),all subsiding after 6–9 mo,without complications,such as delayed wound healing or dermatitis.CONCLUSION Surgical resection,super subtraction sutures,and superficial radiotherapy are treatment methods with short courses,low recurrence rates,and good safety profiles.

MICROPROCESSOR BASED MODEL FOLLOWING ADAPTIVE CONTROL SYSTEM FOR CSIM DRIVES

A model following adaptive control system for CSIM is presented in this paper. A dynamic mathematical model of slip control based system is obtained. With the help of model reducing technique, full order model is reduced to simplify the design without degrading much of the performance. Model following adaptive control laws in discrete form are derived. These laws satisfy the hyperstability condition for taking care of the load and machine parameter changes of the drive. A microprocessor 8098 is used to develop the speed controller. The implementation of the control system uses only available variables of the reference model and the controlled plant. Experimental results are given to demonstrate the good performance of the system.

Investigation on microprocessor based waveform control of short circuit transfer CO_2 welding

A new kind of simple and flexible CO2 welding system was developed to carry out waveform control. The system consisted of IGBT inverter, PWM circuit and microprocessor unit （ MPU） , in which the output current of constant current （CC） power supply could be changed according to transient physical state, and the variable down slope rate control could be used to ensure a stable welding process. The welding experiment results proved the effectiveness of this control approach.

The MMU Implementation of Unity-1 Microprocessor

Virtual memory management is always a very essential issue of the modern microprocessor design. A memory management unit (MMU) is designed to implement a virtual machine for user programs, and provides a management mechanism between the operating system and user programs. This paper analyzes the tradeoffs considered in the MMU design of Unity 11 CPU of Peking University, and introduces in detail the solution of pure hardware table walking with two level page table organization. The implementation takes care of required operations and high performances needed by modern operating systems and low costs needed by embedded systems. This solution has been silicon proven, and successfully porting the Linux 2.4.17 kernel, the XWindow system, GNOME and most application software onto the Unity platform.

The Automated System of Unified Templates as an Element of Trainability of Microprocessor Relay Protection Devices

The article discusses the possibility of further modernization of the standard microprocessor relay protection of AC overhead system feeders DPA-27.5-TNF, which is operated on the Trans-Baikal Railway by creating an additional automated system of unified templates necessary for the occurrence of “trainability” elements. The templates will be formed via a separate dedicated channel for transmission, processing and storage of the necessary information, not related to the operation of the terminal, with its subsequent visualization at the workplace of the duty personnel of traction substations, together with information from the “GID” software received via another dedicated wired channel. With the help of such a base of unified preset templates, in the future, it will be possible not only to identify the specific causes of each emergency shutdown but also to reduce their number by dynamically adjusting the existing presets of the standard operation algorithm.

SF VECTOR CONTROL SYSTEM WITH TWO SINGLE CHIP MICROPROCESSORS

This paper introduces a SF vector control system of a slip frequency controlled induction mo-tor with simple structure,fair performance and convenient operation.It is realized by two singlechip microprocessors and fed from SPWM-GTR inverter.The whole system is combined by twosubsystems,both of them are 8031 single chip microprocessors.The communication between themis coordinated by the full duplex serial port within the chip and ask-and-answer communicationmanner.The error-corrected means adopted has improved the operation reliability of the system.A series of experimental results on a 3 kW induction motor are given at the end of this paper.

MICROPROCESSOR BASED PHASELOCKED LOOP SPEED CONTROL SYSTEM FOR AC MOTOR

In this paper the authors present an analysis and the implementation of microprocessor-baseddigital phase-locked loop speed control system for an induction motor which is actuated by aSPWM-GTR inverter.The system is controlled by a 16-bit single chip microprocessor.A new type of frequency and phase detector is presented in detail,An adaptive method isadopted in speed controller.A three mode control scheme is used.These techniques are very use-ful to the improvement of the dynamic behavior of digital AC motor drive system.Experimental results show that the system is of good stability,high precision and good dynam-ic performance.

On-line Cache Resizing for Low-Power Microprocessors

We propose a novel scheme, called on-line cache resizing （OCR）, to dynamically resize the cache and meet the size requirement of each application. At each periodic interval, the scheme gathers the cache hit-miss statistics at runtime using an extra tag array. These executing statistics serve as inputs to an analytical model of cache energy. The scheme uses energy as a primary metric to dynamically increase/decrease the number of active cache ways for the next interval. The scheme minimizes the active cache size to save energy with minimal performance loss. The simulation with SPEC 2000 benchmarks shows that OCR results in an average of 38.4% energy saving compared with fixed-size caches, with only 2.0% performance loss.

A High Performance and Energy Efficient Microprocessor with a Novel Restricted Dynamically Reconfigurable Accelerator

In the era of Internet of Things, the battery life of edge devices must be extended for sensing connection to the Internet. We aim to reduce the power consumption of the microprocessor embedded in such devices by using a novel dynamically reconfigurable accelerator. Conventional microprocessors consume a large amount of power for memory access, in registers, and for the control of the processor itself rather than computation;this decreases the energy efficiency. Dynamically reconfigurable accelerators reduce such redundant power by computing in parallel on reconfigurable switches and processing element arrays (often consisting of an arithmetic logic unit (ALU) and registers). We propose a novel dynamically reconfigurable accelerator “DYNaSTA” composed of a dynamically reconfigurable data path and static ALU arrays. The static ALU arrays process instructions in parallel without registers and improve energy efficiency. The dynamically reconfigurable data path includes registers and many switches dynamically reconfigured to resolve operand dependencies between instructions mapped on the static ALU array, and forwards appropriate operands to the static ALU array. Therefore, the DYNaSTA accelerator has more flexibility while improving the energy efficiency compared with the conventional dynamically reconfigurable accelerators. We simulated the power consumption of the proposed DYNaSTA accelerator and measured the fabricated chip. As a result, the power consumption was reduced by 69% to 86%, and the energy efficiency improved 4.5 to 13 times compared to a general RISC microprocessor.

Comprehensive Automation of Microprocessor Protection Relay Terminals Operated on AC Railways

The article discusses the possibility of a potential reduction in the number of operations of microprocessor relay protection of feeders of the contact network of AC railways TsZA-27.5-FKS (FTS) for unknown reasons. Real statistics on the number of microprocessor relay protection operations at the Buryatskaya traction substation are presented, simulation of the real train situation (in accordance with the regime maps of the throughput capacity of the sections of the Trans-Baikal railway) was carried out in the specialized software complex “KORTES”. Based on the results of the analysis of simulation modeling, the process of forming a unified template of settings using neural network technologies is considered, which characterizes only this specific regular train situation. To protect objects in the event of pre-emergency and emergency modes of operation of the traction power supply system, a variant of changing the standard operation algorithm of the TsZA-27.5-FKS (FTS) terminal by introducing additional blocks for calculating the predictive functions of current and voltage has been proposed.

UV Wavelength Tunable Output System Controlled by Microprocessor

UV wavelength auto-tuned tuned output system is realized by the difference method. Controlled by the microprocessor, output wavelength auto- tracking is achieved.Besides, equipment self-checking auto-positioning and temperature correct are realized,The wavelength tuned output efficiency in the experiment is better than 97 %.

Digital Filter for Electrocardiogram Preprocessing Based on Microprocessor

This paper proposes a different method to eliminate base wander and power line interference in electrocardiogram, which introduces the integer coefficient filter theory and gives the detail for designing digital filter to remove these two normal noise signals. Signal from the MIT-BIH electrocardiogram database was used to test the performance of the filter. From the test results, the performance of the digital filer is reDT good. The filter coefficient is an integer number, therefore, the filtering algorithm can be successfully implemented on the microprocessor.

Security Vulnerabilities in Microprocessors

Microprocessors such as those found in PCs and smartphones are complex in their design and nature.In recent years,an increasing number of security vulnerabilities have been found within these microprocessors that can leak sensitive user data and information.This report will investigate microarchi­tecture vulnerabilities focusing on the Spectre and Meltdown exploits and will look at what they do,how they do it and,the real-world impact these vulnerabilities can cause.Additionally,there will be an introduction to the basic concepts of how several PC components operate to support this.

用于单片机实验教学的红外激光气体检测仪

为了实现科研反哺教学、促进教学与科研的深度融合,研制了一种基于嵌入式多核处理器和数字信号处理器的实验教学用红外激光气体检测仪。该检测仪包括光学系统和电学系统,其中电学系统包含光谱信息感知模块和嵌入式控制模块。利用研制的检测仪开展了氨制冷冷库现场的泄漏氨气浓度的检测应用。结果表明,与传统气体检测仪相比,该检测仪实现了检测仪的网络化与智能化,而且性能满足实验教学要求。

肌电信号控制的智能小车实验平台设计

肌电信号是人体肌群在运动时产生的一种微弱信号,该信号蕴藏着与运动相关的控制信息源。提出了一种基于肌电信号的智能小车控制系统。该系统由肌电信号采集模块、无线传输模块、小车控制模块和显示模块等组成。整个系统分为主从两部分。主机采用STM32F103ZET6微处理器对肌电信号进行多通道采集,提取所采集信号的特征值。将特征值分为测试集和训练集,并对不同手势信号贴上对应的标签,使用K最近邻(KNN)算法对测试集进行准确度分析以实现对不同手势的识别。识别结果通过无线传输模块发送给从机小车,小车接收到主机发送的内容后进行相应的动作。测试结果表明,所提出的方法在不同时间段信号采集的平均准确率可达91.14%以上,系统具有很好的鲁棒性。

SOI晶体管和电路的瞬时电离辐射效应研究

基于全介质隔离的绝缘硅(Silicon-on-insulator,SOI)器件与体硅器件的瞬时电离辐射效应存在差异,采用1 064 nm/12 ns激光装置开展了三种SOI晶体管的激光辐照试验,测试了不同激光能量下的晶体管光电流;采用脉冲γ射线辐射源开展了SOI集成电路的瞬时γ剂量率辐射试验,测试了不同剂量率条件下的电路功能、电参数和触发器链状态。研究表明:在相同激光能量条件和相同特征尺寸条件下,SOI晶体管的光电流峰值约为体硅晶体管的3.5%;SOI集成电路在1.0×10^(9)~4.2×10^(11) rad(Si)·s^(-1)的试验剂量率范围内无闭锁效应,但存在显著的翻转效应,表现为功能短暂中断、电流和电压波动以及大量触发器状态错误。翻转效应的主要原因包括晶体管本身的翻转和印刷电路板(Printed Circuit Board,PCB)板级电路的电压波动。

The Temperature Intelligence Control System Based on Single Chip-Microprocessor

The paper introduces a temperature control systembased on AT89C51 single-chip-microprocessor, and discussesthe principle , hardware structure, and software design of thissystem in detail.

智能倾角LED预警系统设计

提出了一种基于MCU与MEMS微机电惯性传感器技术的高精度倾角测量方法。系统以STM32F103微处理器为控制核心,采用三轴加速度和三轴角速度传感器作为倾角预警系统的主传感器,设计基于加速度和角速率陀螺的互补滤波器,提高倾角的测量精度,并采用LED灯和蜂鸣器的报警实现大倾角的预警功能。实验表明,本系统倾角测量精度可达±0.1°,具有很好的工作稳定性和较高的性价比,可用于无人机、平衡车等应用场合。

一种模型微处理器的汇编器设计与应用

“微机原理”课程是大多数理工科高校学生的必修课程,当前“微机原理”教学常常被限制在x86指令集架构及其典型芯片的框架内,针对教学缺乏灵活性的问题,课程组在x86的基础上开发了一种模型微处理器,为了配合模型微处理器开展“微机原理”教学,通过设计并实现了一种模型微处理器的汇编器,具有源程序输入、编辑、汇编、调试及仿真等功能,可以顺利地将模型微处理器应用于“微机原理”教学中。通过教师的教学应用和学生上机编程练习,证明了模型机汇编器设计方案的有效性,极大地推动了“微机原理”课程教学改革的实施。

微处理器课程体系建设与教学内容改革

为实现微处理器基础知识、实际应用和前沿技术的并重,建立了三个不同层次课程构成的群。通过整合传统大类课程,强调微处理器共性概念,建立第一层次的基础课程。通过第二和第三层次实训为主,项目驱动的模式,在实践中提高解决实际问题的能力。同时结合不同课程的特点,引入思政元素,达到育人和育才的统一。结果表明课程群在增强学生创新实践能力、提升学科竞赛水平中发挥了积极作用。