Research on adaptive deformable mirror technology for voice coil actuators(VCAs)is an important trend in the development of large ground-based telescopes.A voice coil adaptive deformable mirror contains a large number...Research on adaptive deformable mirror technology for voice coil actuators(VCAs)is an important trend in the development of large ground-based telescopes.A voice coil adaptive deformable mirror contains a large number of actuators,and there are problems with structural coupling and large temperature increases in their internal coils.Additionally,parameters of the traditional proportional integral derivative(PID)control cannot be adjusted in real-time to adapt to system changes.These problems can be addressed by introducing fuzzy control methods.A table lookup method is adopted to replace real-time calculations of the regular fuzzy controller during the control process,and a prototype platform has been established to verify the effectiveness and robustness of this process.Experimental tests compare the control performance of traditional and fuzzy proportional integral derivative(Fuzzy-PID)controllers,showing that,in system step response tests,the fuzzy control system reduces rise time by 20.25%,decreases overshoot by 78.24%,and shortens settling time by 67.59%.In disturbance rejection experiments,fuzzy control achieves a 46.09%reduction in the maximum deviation,indicating stronger robustness.The Fuzzy-PID controller,based on table lookup,outperforms the standard controller significantly,showing excellent potential for enhancing the dynamic performance and disturbance rejection capability of the voice coil motor actuator system.展开更多
Multilayer interference mirrors play a pivotal role in spectroscopic diagnostic systems,which probe electron temperature and density during inertial confinement fusion processes.In this study,aperiodic Mo/B_(4)C multi...Multilayer interference mirrors play a pivotal role in spectroscopic diagnostic systems,which probe electron temperature and density during inertial confinement fusion processes.In this study,aperiodic Mo/B_(4)C multilayer mirrors of varied thick-nesses were investigated for X-ray plasma diagnostics at the 9.67-keV W-Lβline.The thickness distribution of the aperiodic multilayers was designed using the first Bragg diffraction condition and then optimized through a simplex algorithm to realize a narrow bandwidth and consistent spectral response.To enhance spectral accuracy,further refinements were undertaken by matching the grazing incidence X-ray reflectivity data with actual structural parameters.X-ray reflectivity measurements from the SSRF synchrotron radiation facility on the optimized sample showed a reflectivity of 29.7±2.6%,flat-band range of 1.3 keV,and bandwidth of 1.7 keV,making it suitable for high-temperature plasma diagnostics.The study explored the potential of predicting the 9.67 keV reflectivity spectrum using the fitting data from the grazing incidence X-ray reflectivity curves at 8.05 keV.Additionally,the short-term thermal stability of an aperiodic multilayer was assessed using temperature-dependent in situ X-ray measurements.Shifts in the reflectivity spectrum during annealing were attributed to interdiffusion and interfacial relaxation.The research team recommends the aperiodic Mo/B_(4)C multilayer mirror for operations below 300℃.展开更多
Relativistic femtosecond mid-infrared pulses can be generated efficiently by laser interaction with near-criticaldensity plasmas.It is found theoretically and numerically that the radiation pressure of a circularly po...Relativistic femtosecond mid-infrared pulses can be generated efficiently by laser interaction with near-criticaldensity plasmas.It is found theoretically and numerically that the radiation pressure of a circularly polarized laser pulse first compresses the plasma electrons to form a dense flying mirror with a relativistic high speed.The pulse reflected by the mirror is red-shifted to the mid-infrared range.Full three-dimensional simulations demonstrate that the central wavelength of the mid-infrared pulse is tunable from 3µm to 14µm,and the laser energy conversion efficiency can reach as high as 13%.With a 0.5–10 PW incident laser pulse,the generated mid-infrared pulse reaches a peak power of 10–180 TW,which is interesting for various applications in ultrafast and high-field sciences.展开更多
Aiming to analyze the damage mechanism of UTAO from the perspective of meso-mechanical mechanism using discrete element method(DEM),we conducted study of diseases problems of UTAO in several provinces in China,and fou...Aiming to analyze the damage mechanism of UTAO from the perspective of meso-mechanical mechanism using discrete element method(DEM),we conducted study of diseases problems of UTAO in several provinces in China,and found that aggregate spalling was one of the main disease types of UTAO.A discrete element model of UTAO pavement structure was constructed to explore the meso-mechanical mechanism of UTAO damage under the influence of layer thickness,gradation,and bonding modulus.The experimental results show that,as the thickness of UTAO decreasing,the maximum value and the mean value of the contact force between all aggregate particles gradually increase,which leads to aggregates more prone to spalling.Compared with OGFC-5 UTAO,AC-5 UTAO presents smaller maximum and average values of all contact forces,and the loading pressure in AC-5 UTAO is fully diffused in the lateral direction.In addition,the increment of pavement modulus strengthens the overall force of aggregate particles inside UTAO,resulting in aggregate particles peeling off more easily.The increase of bonding modulus changes the position where the maximum value of the tangential force appears,whereas has no effect on the normal force.展开更多
For the application of carbon capture by membrane process,it is crucial to develop a highly permeable CO_(2)-selective membrane.In this work,we reported an ultra-thin polyether-block-amide(Pebax)mixedmatrix membranes(...For the application of carbon capture by membrane process,it is crucial to develop a highly permeable CO_(2)-selective membrane.In this work,we reported an ultra-thin polyether-block-amide(Pebax)mixedmatrix membranes(MMMs)incorporated by graphene oxide(GO),in which the interlayer channels were regulated to optimize the CO_(2)/N_(2) separation performance.Various membrane preparation conditions were systematically investigated on the influence of the membrane structure and separation performance,including the lateral size of GO nanosheets,GO loading,thermal reduction temperature,and time.The results demonstrated that the precisely regulated interlayer channel of GO nanosheets can rapidly provide CO_(2)-selective transport channels due to the synergetic effects of size sieving and preferential adsorption.The GO/Pebax ultra-thin MMMs exhibited CO_(2)/N_(2) selectivity of 72 and CO_(2) permeance of 400 GPU(1 GPU=106 cm^(3)(STP)·cm^(2)·s^(-1)·cmHg^(-1)),providing a promising candidate for CO_(2) capture.展开更多
American Hollywood animated films have conquered the world.In recent years,many successful works have appeared in domestic animated films,bringing new vitality to the Chinese animated film industry.Based on Lacan’s M...American Hollywood animated films have conquered the world.In recent years,many successful works have appeared in domestic animated films,bringing new vitality to the Chinese animated film industry.Based on Lacan’s Mirror Stage Theory,this study attempts to start from the bravery of Judy and Nezha,the protagonists of Zootopia(2016)and Nezha(2019).It analyzes and compares their embodiment,formation,influence and reflection with real society to solve the problems of the two brave characters’formation causes,characteristic differences and social influences,including racial discrimination,individualism in American society and family problems in Chinese society.This study sheds light on the transmission of intercultural values in animated films.展开更多
Two important motifs of The Magic Toyshop,mirrors and puppets,are highly symbolic.They,especially mirrors,play an important role in revealing the theme of Melanie’s growing pains at the cusp of adulthood.From narciss...Two important motifs of The Magic Toyshop,mirrors and puppets,are highly symbolic.They,especially mirrors,play an important role in revealing the theme of Melanie’s growing pains at the cusp of adulthood.From narcissistic proclivities to first“sexual”transgression,from falling victim to Uncle Philip’s manipulation to rebellion against him with her“hero”Finn,the hero⁃ine went through one hardship after another,gradually grew out of her reflection in the mirror and entered the adult world.展开更多
We propose a slope-based decoupling algorithm to simultaneously control the dual deformable mirrors (DMs) in a woofer-tweeter adaptive optics system. This algorithm can directly use the woofer's response matrix mea...We propose a slope-based decoupling algorithm to simultaneously control the dual deformable mirrors (DMs) in a woofer-tweeter adaptive optics system. This algorithm can directly use the woofer's response matrix measured from a Shack-Hartmann wave-front sensor to construct a slope-based orthogonal basis, and then selectively distribute the large- amplitude low-order aberration to woofer DM and the remaining aberration to tweeter DM through the slope-based orthogonal basis. At the same moment, in order to avoid the two DMs generating opposite compensation, a constraint matrix used to reset tweeter control vector is convenient to be calculated with the slope-based orthogonal basis. Numeral simulation demonstrates that this algorithm has a good performance to control the adaptive optics system with dual DMs simultaneously. Compared with the typical decoupling algorithm, this algorithm can take full use of the compensation ability of woofer DM and release the stroke of tweeter DM to compensate high-order aberration. More importantly, it does not need to measure the accurate shape of tweeter's influence function and keeps better performance of restraining the coupling error with the continuous-dynamic aberration.展开更多
Both long-term environmental durability and high reflectance of protected-Al mirrors are of great importance for developing the optical instruments in the vacuum ultraviolet(VUV) applications. In this paper, the depen...Both long-term environmental durability and high reflectance of protected-Al mirrors are of great importance for developing the optical instruments in the vacuum ultraviolet(VUV) applications. In this paper, the dependence of spectral property and environmental durability of MgF2 over-coated Al mirrors using a 3-step method on deposition temperature of the outermost MgF2 layer are investigated in detail. Optics(reflectance), structure(surface morphology and crystalline), and environmental durability(humidity test) are characterized and discussed. The results show that both optical and moistureresistant properties of MgF2 over-coated Al mirrors are dependent on MgF2 deposition temperature, and the optimal deposition temperature for the outermost MgF2 layer should be between 250℃ and 300℃ for MgF2 over-coated Al mirrors to have both reasonably high reflectance in the VUV spectral range and high moisture resistance for long lifetime applications.展开更多
The first mirror (FM) samples made of polycrystal (PC) stainless steel (SS), molybdenum (Mo) and tungsten (W) were mounted at different locations in HT-7 tokamak to investigate the surface modifications caus...The first mirror (FM) samples made of polycrystal (PC) stainless steel (SS), molybdenum (Mo) and tungsten (W) were mounted at different locations in HT-7 tokamak to investigate the surface modifications caused by erosion and deposition. The optical transmission characteristics of first mirror samples were measured by a spectrophotometer. It was found that different irradiation environment had different influences on the first mirror surfaces, especially with wave antenna nearby. In addition, the erosion made the reflectivity of FM degrade to some extents as a whole. But the deposition on the mirror influences more than erosion does. Comparing the mirrors of SS, W and Mo, irradiated in the same environment, the W-mirror had the least changes in reflectivity with regularity, while the SS-mirror had most serious changes.展开更多
A numerical model is presented to simulate the influence function of de- formable mirror actuators. The numerical model is formed by Bessel Fourier orthog- onal functions, which are constituted of Bessel orthogonal fu...A numerical model is presented to simulate the influence function of de- formable mirror actuators. The numerical model is formed by Bessel Fourier orthog- onal functions, which are constituted of Bessel orthogonal functions and a Fourier basis. A detailed comparison is presented between the new Bessel Fourier model, the Zernike model, the Gaussian influence function and the modified Gaussian influence function. Numerical experiments indicate that the new numerical model is easy to use and more accurate compared with other numerical models. The new numerical model can be used for describing deformable mirror performances and numerical simulations of adaptive optics systems.展开更多
The stainless steel (SS) first mirror pre-exposed in the deposition-dominated envi- ronment of the HT-7 tokamak was cleaned in the newly built radio frequency (RF) magnetron sputtering plasma device. The depositio...The stainless steel (SS) first mirror pre-exposed in the deposition-dominated envi- ronment of the HT-7 tokamak was cleaned in the newly built radio frequency (RF) magnetron sputtering plasma device. The deposition layer on the FM surface formed during the exposure was successfully removed by argon plasma with a RF power of about 80 W and a gas pressure of 0.087 Pa for 30 min. The total reflectivity of the mirrors was recovered up to 90% in the wavelength range of 300-800 nm, while the diffuse reflectivity showed a little increase, which was attributed to the increase of surface roughness in sputtering, and residual contaminants. The FMs made from single crystal materials could help to achieve a desired recovery of specular reflectivity in the future.展开更多
In order to investigate the effect of aperture geometry on deposition mitigation, stainless steel (SS) first mirrors (FMs) were fixed on the holders of protective aperture geometry with different depth-diameter ra...In order to investigate the effect of aperture geometry on deposition mitigation, stainless steel (SS) first mirrors (FMs) were fixed on the holders of protective aperture geometry with different depth-diameter ratios (DDRs) and exposed in the deposition dominated environment of EAST. A baffle was used during the wall conditioning. The surface properties and reflectivity of the FMs were characterized before and after exposure. It is shown that using aperture geometry and a baffle can effectively mitigate the impurities deposition. The degradation of the surface and specular reflectivity of the FMs is reduced with the increase of DDRs in the range of 0 to 2. The main contaminated elements in a low-Z and high-Z mixed wall materials environment were still carbon and oxygen.展开更多
Hot solution of hydroquinone is oxidized by air forming quinone and quinhydrone, both of which have weak oxidizeability, enabling to oxidize metals on the surface of bronze mirror samples forming black and brilliant p...Hot solution of hydroquinone is oxidized by air forming quinone and quinhydrone, both of which have weak oxidizeability, enabling to oxidize metals on the surface of bronze mirror samples forming black and brilliant patina. SEM and electron micro probe analysis show that Cu content is lower than that of the original alloy due to Cu loss; Sn content is higher than the original alloy in patina. This indicates that humic acid is not the substance resulting in making black patina on the bronze mirror surface, but the black patina which produced from hydroquinone solution absence of Si, Al and Mg.展开更多
A new controllable laser beam shaping technique is demonstrated, where a magnetic fluid-based liquid deformable mirror is proposed to redistribute the laser phase profile and thus change the propagation property of th...A new controllable laser beam shaping technique is demonstrated, where a magnetic fluid-based liquid deformable mirror is proposed to redistribute the laser phase profile and thus change the propagation property of the beam. The mirror is driven by an inner miniature actuator array along with a large outer actuator. The inner actuator array is used for deforming the magnetic fluid surface, while the outer actuator is used to linearize the fluid surface response and amplify the magnitude of the deflection. In comparison to other laser beam shaping techniques, this technique offers the advantages such as simplicity, low cost, large shape deformation, and high adaptability. Based on a fabricated prototype of the liquid deformable mirror, an experimental AO system was set up to produce a desired conical surface shape that shaped the incident beam into a Bessel beam. The experimental results show the effectiveness of the proposed technique for laser beam shaping.展开更多
The formation of black patina caused by soil humic acid under different conditions has been studied,and the black, grey and brown shiny surfaces prepared in laboratory have been analysed. The formation of tin-rich shi...The formation of black patina caused by soil humic acid under different conditions has been studied,and the black, grey and brown shiny surfaces prepared in laboratory have been analysed. The formation of tin-rich shiny black surface on mirrors was the product of the soil corrosion of the bronze mirrors. It is formed by reaction between the alloy and the humic acid in soil, and leaching of copper and lead oxides through a long period of time when the mirrors were buried under the ground. A dense cormsion-resistallt layer on the bronze mirrors consisted predominantly of stannic oxide.展开更多
The nuclear charge radius plays a vital role in determining the equation of state of isospin asymmetric nuclear matter.Based on the correlation between the differences in charge radii of mirror-partner nuclei and the ...The nuclear charge radius plays a vital role in determining the equation of state of isospin asymmetric nuclear matter.Based on the correlation between the differences in charge radii of mirror-partner nuclei and the slope parameter(L)of symmetry energy at the nuclear saturation density,an analysis of the calibrated slope parameter L was performed in finite nuclei.In this study,relativistic and nonrelativistic energy density functionals were employed to constrain the nuclear symmetry energy through the available databases of the mirror-pair nuclei^(36)Ca–^(36)S,^(38)Ca–^(38)Ar,and ^(54)Ni–^(54)Fe.The deduced nuclear symmetry energy was located in the range 29.89–31.85 MeV,and L of the symmetry energy essentially covered the range 22.50–51.55 MeV at the saturation density.Moreover,the extracted L_(s) at the sensitivity density p_(s)=0.10 fm^(-3) was located in the interval range 30.52–39.76 MeV.展开更多
Large aspheric mirrors are needed for the remote sensing and ground based telescope optical systems,these mirrors are made of hard and brittle materials which require ultra-precision grinding process to guarantee the ...Large aspheric mirrors are needed for the remote sensing and ground based telescope optical systems,these mirrors are made of hard and brittle materials which require ultra-precision grinding process to guarantee the high profile accuracy and machining efficiency. The ultra-precision aspheric CNC grinding machine( UAG900) is presented by this paper,as well as its grinding capability. The hydrostatic bearings of high accuracy and stiffness are adopted by the linear and rotary motions to guarantee the mirror accuracy,material removal rate and subsurface damage. Disk type grinding wheel with arc edge is used. The material removal rate can be up to 360 mm3/ min to guarantee the machining efficiency during rough grinding using D180 diamond grinding wheel while the fine grinding is performed using D15 grinding wheel. It indicates that the grinding wheel radius measuring error is proportional to the profile error induced by the grinding path. The grinding step size is better to be 0. 01 mm for the reduction of the grinding movement accelerations and program length. The grinding path is planned and expressed based on the grinding mode according to the mirror shape. One540 mm×450 mm× 100 mm zerodur mirror is ground and re-ground using the measuring data acquired by the Leitz CMM. The final surface accuracy of P-V value is less than 5 μm after compensation grinding.展开更多
Integrating deformable mirrors within the optical train of an adaptive telescope was one of the major innovations in astronomical observation technology,distinguished by its high optical throughput,reduced optical sur...Integrating deformable mirrors within the optical train of an adaptive telescope was one of the major innovations in astronomical observation technology,distinguished by its high optical throughput,reduced optical surfaces,and the incorporation of the deformable mirror.Typically,voice-coil actuators are used,which require additional position sensors,internal control electronics,and cooling systems,leading to a very complex structure.Piezoelectric deformable secondary mirror technologies were proposed to overcome these problems.Recently,a high-order piezoelectric deformable secondary mirror has been developed and installed on the 1.8-m telescope at Lijiang Observatory in China to make it an adaptive telescope.The system consists of a 241-actuator piezoelectric deformable secondary mirror,a 192-sub-aperture Shack-Hartmann wavefront sensor,and a multi-core-based real-time controller.The actuator spacing of the PDSM measures 19.3 mm,equivalent to approximately 12.6 cm when mapped onto the primary mirror,significantly less than the voicecoil-based adaptive telescopes such as LBT,Magellan and VLT.As a result,stellar images with Strehl ratios above 0.49 in the R band have been obtained.To our knowledge,these are the highest R band images captured by an adaptive telescope with deformable secondary mirrors.Here,we report the system description and on-sky performance of this adaptive telescope.展开更多
基金supported by the National Key R&D Program of China (2022YFA1603001,2021YFC2801402)the National Nature Science Foundation of China (12073053)the Science and Technology Plan of Inner Mongolia (2021GG0245).
文摘Research on adaptive deformable mirror technology for voice coil actuators(VCAs)is an important trend in the development of large ground-based telescopes.A voice coil adaptive deformable mirror contains a large number of actuators,and there are problems with structural coupling and large temperature increases in their internal coils.Additionally,parameters of the traditional proportional integral derivative(PID)control cannot be adjusted in real-time to adapt to system changes.These problems can be addressed by introducing fuzzy control methods.A table lookup method is adopted to replace real-time calculations of the regular fuzzy controller during the control process,and a prototype platform has been established to verify the effectiveness and robustness of this process.Experimental tests compare the control performance of traditional and fuzzy proportional integral derivative(Fuzzy-PID)controllers,showing that,in system step response tests,the fuzzy control system reduces rise time by 20.25%,decreases overshoot by 78.24%,and shortens settling time by 67.59%.In disturbance rejection experiments,fuzzy control achieves a 46.09%reduction in the maximum deviation,indicating stronger robustness.The Fuzzy-PID controller,based on table lookup,outperforms the standard controller significantly,showing excellent potential for enhancing the dynamic performance and disturbance rejection capability of the voice coil motor actuator system.
基金This work was supported by the National Natural Science Foundation of China(NSFC)(Nos.11875204 and U1932167)Fundamental Research Funds for the Central Universities(Nos.22120210446 and 22120180070)the Presidential Foundation of China Academy of Engineering Physics(No.YZJJLX2019011).
文摘Multilayer interference mirrors play a pivotal role in spectroscopic diagnostic systems,which probe electron temperature and density during inertial confinement fusion processes.In this study,aperiodic Mo/B_(4)C multilayer mirrors of varied thick-nesses were investigated for X-ray plasma diagnostics at the 9.67-keV W-Lβline.The thickness distribution of the aperiodic multilayers was designed using the first Bragg diffraction condition and then optimized through a simplex algorithm to realize a narrow bandwidth and consistent spectral response.To enhance spectral accuracy,further refinements were undertaken by matching the grazing incidence X-ray reflectivity data with actual structural parameters.X-ray reflectivity measurements from the SSRF synchrotron radiation facility on the optimized sample showed a reflectivity of 29.7±2.6%,flat-band range of 1.3 keV,and bandwidth of 1.7 keV,making it suitable for high-temperature plasma diagnostics.The study explored the potential of predicting the 9.67 keV reflectivity spectrum using the fitting data from the grazing incidence X-ray reflectivity curves at 8.05 keV.Additionally,the short-term thermal stability of an aperiodic multilayer was assessed using temperature-dependent in situ X-ray measurements.Shifts in the reflectivity spectrum during annealing were attributed to interdiffusion and interfacial relaxation.The research team recommends the aperiodic Mo/B_(4)C multilayer mirror for operations below 300℃.
基金supported by the National Natural Science Foundation of China(Grant Nos.12375244,12135009,and 12275356)the Hunan Provincial Innovation Foun-dation for Postgraduate(Grant Nos.CX20210062 and CX20230006).
文摘Relativistic femtosecond mid-infrared pulses can be generated efficiently by laser interaction with near-criticaldensity plasmas.It is found theoretically and numerically that the radiation pressure of a circularly polarized laser pulse first compresses the plasma electrons to form a dense flying mirror with a relativistic high speed.The pulse reflected by the mirror is red-shifted to the mid-infrared range.Full three-dimensional simulations demonstrate that the central wavelength of the mid-infrared pulse is tunable from 3µm to 14µm,and the laser energy conversion efficiency can reach as high as 13%.With a 0.5–10 PW incident laser pulse,the generated mid-infrared pulse reaches a peak power of 10–180 TW,which is interesting for various applications in ultrafast and high-field sciences.
文摘Aiming to analyze the damage mechanism of UTAO from the perspective of meso-mechanical mechanism using discrete element method(DEM),we conducted study of diseases problems of UTAO in several provinces in China,and found that aggregate spalling was one of the main disease types of UTAO.A discrete element model of UTAO pavement structure was constructed to explore the meso-mechanical mechanism of UTAO damage under the influence of layer thickness,gradation,and bonding modulus.The experimental results show that,as the thickness of UTAO decreasing,the maximum value and the mean value of the contact force between all aggregate particles gradually increase,which leads to aggregates more prone to spalling.Compared with OGFC-5 UTAO,AC-5 UTAO presents smaller maximum and average values of all contact forces,and the loading pressure in AC-5 UTAO is fully diffused in the lateral direction.In addition,the increment of pavement modulus strengthens the overall force of aggregate particles inside UTAO,resulting in aggregate particles peeling off more easily.The increase of bonding modulus changes the position where the maximum value of the tangential force appears,whereas has no effect on the normal force.
基金financially supported by The Natural Science Foundation of the Jiangsu Higher Education Institutions of China(22KJB530007,22KJA530001)National Natural Science Foundation of China(22208151)+1 种基金the Natural Science Foundation of Jiangsu Province(BK20220002)the State Key Laboratory of MaterialsOriented Chemical Engineering(SKL-MCE-22B07).
文摘For the application of carbon capture by membrane process,it is crucial to develop a highly permeable CO_(2)-selective membrane.In this work,we reported an ultra-thin polyether-block-amide(Pebax)mixedmatrix membranes(MMMs)incorporated by graphene oxide(GO),in which the interlayer channels were regulated to optimize the CO_(2)/N_(2) separation performance.Various membrane preparation conditions were systematically investigated on the influence of the membrane structure and separation performance,including the lateral size of GO nanosheets,GO loading,thermal reduction temperature,and time.The results demonstrated that the precisely regulated interlayer channel of GO nanosheets can rapidly provide CO_(2)-selective transport channels due to the synergetic effects of size sieving and preferential adsorption.The GO/Pebax ultra-thin MMMs exhibited CO_(2)/N_(2) selectivity of 72 and CO_(2) permeance of 400 GPU(1 GPU=106 cm^(3)(STP)·cm^(2)·s^(-1)·cmHg^(-1)),providing a promising candidate for CO_(2) capture.
文摘American Hollywood animated films have conquered the world.In recent years,many successful works have appeared in domestic animated films,bringing new vitality to the Chinese animated film industry.Based on Lacan’s Mirror Stage Theory,this study attempts to start from the bravery of Judy and Nezha,the protagonists of Zootopia(2016)and Nezha(2019).It analyzes and compares their embodiment,formation,influence and reflection with real society to solve the problems of the two brave characters’formation causes,characteristic differences and social influences,including racial discrimination,individualism in American society and family problems in Chinese society.This study sheds light on the transmission of intercultural values in animated films.
文摘Two important motifs of The Magic Toyshop,mirrors and puppets,are highly symbolic.They,especially mirrors,play an important role in revealing the theme of Melanie’s growing pains at the cusp of adulthood.From narcissistic proclivities to first“sexual”transgression,from falling victim to Uncle Philip’s manipulation to rebellion against him with her“hero”Finn,the hero⁃ine went through one hardship after another,gradually grew out of her reflection in the mirror and entered the adult world.
基金Project supported by the Key Scientific Equipment Development Project of China(Grant No.ZDYZ2013-2)the National High-Tech R&D Program of China(Grant Nos.G128201-G158201 and G128603-G158603)+2 种基金the Innovation Fund of Chinese Academy of Science(Grant No.CXJJ-16M208)the Youth Innovation Promotion Association of the Chinese Academy of Sciencesthe Outstanding Young Scientists,Chinese Academy of Sciences
文摘We propose a slope-based decoupling algorithm to simultaneously control the dual deformable mirrors (DMs) in a woofer-tweeter adaptive optics system. This algorithm can directly use the woofer's response matrix measured from a Shack-Hartmann wave-front sensor to construct a slope-based orthogonal basis, and then selectively distribute the large- amplitude low-order aberration to woofer DM and the remaining aberration to tweeter DM through the slope-based orthogonal basis. At the same moment, in order to avoid the two DMs generating opposite compensation, a constraint matrix used to reset tweeter control vector is convenient to be calculated with the slope-based orthogonal basis. Numeral simulation demonstrates that this algorithm has a good performance to control the adaptive optics system with dual DMs simultaneously. Compared with the typical decoupling algorithm, this algorithm can take full use of the compensation ability of woofer DM and release the stroke of tweeter DM to compensate high-order aberration. More importantly, it does not need to measure the accurate shape of tweeter's influence function and keeps better performance of restraining the coupling error with the continuous-dynamic aberration.
基金Project supported by the West Light Foundation of the Chinese Academy of Sciencesthe National Natural Science Foundation of China(Grant No.61805247)
文摘Both long-term environmental durability and high reflectance of protected-Al mirrors are of great importance for developing the optical instruments in the vacuum ultraviolet(VUV) applications. In this paper, the dependence of spectral property and environmental durability of MgF2 over-coated Al mirrors using a 3-step method on deposition temperature of the outermost MgF2 layer are investigated in detail. Optics(reflectance), structure(surface morphology and crystalline), and environmental durability(humidity test) are characterized and discussed. The results show that both optical and moistureresistant properties of MgF2 over-coated Al mirrors are dependent on MgF2 deposition temperature, and the optimal deposition temperature for the outermost MgF2 layer should be between 250℃ and 300℃ for MgF2 over-coated Al mirrors to have both reasonably high reflectance in the VUV spectral range and high moisture resistance for long lifetime applications.
基金National Natural Science Foundation of China(No.10775138)
文摘The first mirror (FM) samples made of polycrystal (PC) stainless steel (SS), molybdenum (Mo) and tungsten (W) were mounted at different locations in HT-7 tokamak to investigate the surface modifications caused by erosion and deposition. The optical transmission characteristics of first mirror samples were measured by a spectrophotometer. It was found that different irradiation environment had different influences on the first mirror surfaces, especially with wave antenna nearby. In addition, the erosion made the reflectivity of FM degrade to some extents as a whole. But the deposition on the mirror influences more than erosion does. Comparing the mirrors of SS, W and Mo, irradiated in the same environment, the W-mirror had the least changes in reflectivity with regularity, while the SS-mirror had most serious changes.
基金supported by the Opening Project of the Key Laboratory of Astronomical Optics and Technology, Nanjing Institute of Astronomical Optics and Technology, Chinese Academy of Sciences (No. CAS-KLAOT-KF201206)
文摘A numerical model is presented to simulate the influence function of de- formable mirror actuators. The numerical model is formed by Bessel Fourier orthog- onal functions, which are constituted of Bessel orthogonal functions and a Fourier basis. A detailed comparison is presented between the new Bessel Fourier model, the Zernike model, the Gaussian influence function and the modified Gaussian influence function. Numerical experiments indicate that the new numerical model is easy to use and more accurate compared with other numerical models. The new numerical model can be used for describing deformable mirror performances and numerical simulations of adaptive optics systems.
基金supported by the National Magnetic Confinement Fusion Science Program of China(No.2013GB105003)National Natural Science Foundation of China(No.11175205)
文摘The stainless steel (SS) first mirror pre-exposed in the deposition-dominated envi- ronment of the HT-7 tokamak was cleaned in the newly built radio frequency (RF) magnetron sputtering plasma device. The deposition layer on the FM surface formed during the exposure was successfully removed by argon plasma with a RF power of about 80 W and a gas pressure of 0.087 Pa for 30 min. The total reflectivity of the mirrors was recovered up to 90% in the wavelength range of 300-800 nm, while the diffuse reflectivity showed a little increase, which was attributed to the increase of surface roughness in sputtering, and residual contaminants. The FMs made from single crystal materials could help to achieve a desired recovery of specular reflectivity in the future.
基金supported by the National Magnetic Confinement Fusion Science Program of China(No.2013GB105003)National Natural Science Foundation of China(No.11175205)
文摘In order to investigate the effect of aperture geometry on deposition mitigation, stainless steel (SS) first mirrors (FMs) were fixed on the holders of protective aperture geometry with different depth-diameter ratios (DDRs) and exposed in the deposition dominated environment of EAST. A baffle was used during the wall conditioning. The surface properties and reflectivity of the FMs were characterized before and after exposure. It is shown that using aperture geometry and a baffle can effectively mitigate the impurities deposition. The degradation of the surface and specular reflectivity of the FMs is reduced with the increase of DDRs in the range of 0 to 2. The main contaminated elements in a low-Z and high-Z mixed wall materials environment were still carbon and oxygen.
文摘Hot solution of hydroquinone is oxidized by air forming quinone and quinhydrone, both of which have weak oxidizeability, enabling to oxidize metals on the surface of bronze mirror samples forming black and brilliant patina. SEM and electron micro probe analysis show that Cu content is lower than that of the original alloy due to Cu loss; Sn content is higher than the original alloy in patina. This indicates that humic acid is not the substance resulting in making black patina on the bronze mirror surface, but the black patina which produced from hydroquinone solution absence of Si, Al and Mg.
基金Project supported by the National Natural Science Foundation of China(Grant No.51675321)Shanghai Municipal Natural Science Foundation,China(Grant No.15ZR1415800)the Innovation Program of Shanghai Municipal Education Commission,China(Grant No.14ZZ092)
文摘A new controllable laser beam shaping technique is demonstrated, where a magnetic fluid-based liquid deformable mirror is proposed to redistribute the laser phase profile and thus change the propagation property of the beam. The mirror is driven by an inner miniature actuator array along with a large outer actuator. The inner actuator array is used for deforming the magnetic fluid surface, while the outer actuator is used to linearize the fluid surface response and amplify the magnitude of the deflection. In comparison to other laser beam shaping techniques, this technique offers the advantages such as simplicity, low cost, large shape deformation, and high adaptability. Based on a fabricated prototype of the liquid deformable mirror, an experimental AO system was set up to produce a desired conical surface shape that shaped the incident beam into a Bessel beam. The experimental results show the effectiveness of the proposed technique for laser beam shaping.
文摘The formation of black patina caused by soil humic acid under different conditions has been studied,and the black, grey and brown shiny surfaces prepared in laboratory have been analysed. The formation of tin-rich shiny black surface on mirrors was the product of the soil corrosion of the bronze mirrors. It is formed by reaction between the alloy and the humic acid in soil, and leaching of copper and lead oxides through a long period of time when the mirrors were buried under the ground. A dense cormsion-resistallt layer on the bronze mirrors consisted predominantly of stannic oxide.
基金supported by the Key Laboratory of High Precision Nuclear Spectroscopy,Institute of Modern Physics,Chinese Academy of Sciences,the National Natural Science Foundation of China(Nos.12135004,11635003,11961141004,12275025,and 11975096)the Fundamental Research Funds for Central Universities(No.2020NTST06).
文摘The nuclear charge radius plays a vital role in determining the equation of state of isospin asymmetric nuclear matter.Based on the correlation between the differences in charge radii of mirror-partner nuclei and the slope parameter(L)of symmetry energy at the nuclear saturation density,an analysis of the calibrated slope parameter L was performed in finite nuclei.In this study,relativistic and nonrelativistic energy density functionals were employed to constrain the nuclear symmetry energy through the available databases of the mirror-pair nuclei^(36)Ca–^(36)S,^(38)Ca–^(38)Ar,and ^(54)Ni–^(54)Fe.The deduced nuclear symmetry energy was located in the range 29.89–31.85 MeV,and L of the symmetry energy essentially covered the range 22.50–51.55 MeV at the saturation density.Moreover,the extracted L_(s) at the sensitivity density p_(s)=0.10 fm^(-3) was located in the interval range 30.52–39.76 MeV.
基金Sponsored by the National High Technology Research and Development Program(Grant No.2008AA042503)the National Science and Technology Major Project(Grant No.2013ZX04006011-201)
文摘Large aspheric mirrors are needed for the remote sensing and ground based telescope optical systems,these mirrors are made of hard and brittle materials which require ultra-precision grinding process to guarantee the high profile accuracy and machining efficiency. The ultra-precision aspheric CNC grinding machine( UAG900) is presented by this paper,as well as its grinding capability. The hydrostatic bearings of high accuracy and stiffness are adopted by the linear and rotary motions to guarantee the mirror accuracy,material removal rate and subsurface damage. Disk type grinding wheel with arc edge is used. The material removal rate can be up to 360 mm3/ min to guarantee the machining efficiency during rough grinding using D180 diamond grinding wheel while the fine grinding is performed using D15 grinding wheel. It indicates that the grinding wheel radius measuring error is proportional to the profile error induced by the grinding path. The grinding step size is better to be 0. 01 mm for the reduction of the grinding movement accelerations and program length. The grinding path is planned and expressed based on the grinding mode according to the mirror shape. One540 mm×450 mm× 100 mm zerodur mirror is ground and re-ground using the measuring data acquired by the Leitz CMM. The final surface accuracy of P-V value is less than 5 μm after compensation grinding.
基金funded by the National Natural Science Foundation of China(No.11733005,12173041,11727805)Youth Innovation Promotion Association,Chinese Academy of Sciences(No.2020376)Frontier Research Fund of Institute of Optics and Electronics,Chinese Academy of Sciences(No.C21K002).
文摘Integrating deformable mirrors within the optical train of an adaptive telescope was one of the major innovations in astronomical observation technology,distinguished by its high optical throughput,reduced optical surfaces,and the incorporation of the deformable mirror.Typically,voice-coil actuators are used,which require additional position sensors,internal control electronics,and cooling systems,leading to a very complex structure.Piezoelectric deformable secondary mirror technologies were proposed to overcome these problems.Recently,a high-order piezoelectric deformable secondary mirror has been developed and installed on the 1.8-m telescope at Lijiang Observatory in China to make it an adaptive telescope.The system consists of a 241-actuator piezoelectric deformable secondary mirror,a 192-sub-aperture Shack-Hartmann wavefront sensor,and a multi-core-based real-time controller.The actuator spacing of the PDSM measures 19.3 mm,equivalent to approximately 12.6 cm when mapped onto the primary mirror,significantly less than the voicecoil-based adaptive telescopes such as LBT,Magellan and VLT.As a result,stellar images with Strehl ratios above 0.49 in the R band have been obtained.To our knowledge,these are the highest R band images captured by an adaptive telescope with deformable secondary mirrors.Here,we report the system description and on-sky performance of this adaptive telescope.