Study on Extraction of Oolong Tea Assisted by Ultrasonic Wave and 4C Technique and Its Application

[Objectives]The extraction conditions of formula oolong tea were investigated by an orthogonal experiment.[Methods]The technical conditions were optimized by the 4C method,and the application of formula oolong tea extract in cigarettes was studied.[Results]①In the experimental range,the best sensory evaluation effect of formula oolong tea extract was obtained with extraction conditions of 70%ethanol as extraction solvent,extraction time h,extraction temperature 25℃,and ultrasonic frequency 80 kHz,and follow-up low-temperature concentration,low-temperature sedimentation and low-temperature centrifugation.②The effects of different centrifugal speeds on the quality of formula oolong tea extract were explored.The formula oolong tea extract obtained under the conditions of 3000 r/min and centrifugal time of 10 min showed the best evaluation effect with soft and delicate smoke,rich smoke fragrance,good comfort and refreshing mouthfeel.③The effective aroma components in the formula oolong tea extract were qualitatively analyzed by GC-MS.[Conclusions]This study provides high-quality raw materials and a theoretical basis for the research of independent flavor blending in cigarette industry enterprises.

Ultrasonic-Assisted Extraction of Fucoxanthin from Marine Macroalga Padina australis:Optimization,Bioactivity,and Structural Characterization

Macroalgae serve as a potential feedstock for fucoxanthin extraction.Fucoxanthin,a bioactive pigment found in the chloroplasts of marine algae,exhibits significant pharmacological properties.As a member of the carotenoid family,fucoxanthin plays a crucial role in both the food and pharmaceutical industries.This research explores the effects of ultrasonics on the extraction of fucoxanthin from the marine macroalga Padina australis.In addition,various extraction techniques and the influence of solvents on the efficient separation of fucoxanthin from algae have been studied and compared.Using methanol,chloroform,and a combination of methanol and chloroform(1:1,v/v),conventional fucoxanthin extraction from Padina australis yielded 8.12 mg of fucoxanthin per gram of biomass.However,the ultrasonic-assisted extraction resulted in a significantly higher yield of 16.9 mg of fucoxanthin per gram of biomass,demonstrating that the use of ultrasonics enhances the extraction rate compared to conventional methods.Therefore,the efficient separation of fucoxanthin from Padina australis is highly dependent on ultrasonic-assisted extraction.The process conditions for the extraction were optimized to maximize the yield of fucoxanthin from seaweeds.The following parameters were selected for optimization studies:moisture content,particle size,mixing speed,extraction temperature,extraction duration,and solid-to-solvent ratio.The extracted fucoxanthin exhibited various biological activities,including antimicrobial and antioxidant properties,and its structure was elucidated through FTIR and NMR spectroscopy.Additionally,thin-layer chromatography of the crude algae extracts confirmed the presence of fucoxanthin in the marine algae.Given these findings,the optimized extraction process holds the potential for scaling up to large-scale fucoxanthin production.Fucoxanthin,as a potent pharmacological agent,offers promising applications in the treatment of various ailments.

Analysis of Ultrasonic Emulsification Surgery and Small Incision Cataract Extracapsular Extraction Surgery for Cataract Clinical Treatment Level Improvement

Objective:To analyze the efficacy of ultrasonic emulsification and small incision cataract extracapsular extraction in cataract patients.Methods:96 cataract patients admitted from May 2021 to May 2023 were selected and randomly grouped into group A(ultrasonic emulsification)and group B(small-incision extracapsular cataract extraction),with 48 cases each.Results:At 1 week,1-month,and 3 months post-operation,the visual acuity of group A was higher and the astigmatism value was lower than that of group B(P<0.05);at 12h,24h,and 48h post-operation,the intraocular pressure of group A was higher than that of group B(P<0.05);the thickness of macular area of group A was lower than that of group B at 1 week and 1-month post-operation(P<0.05).Conclusion:Ultrasonic emulsification in cataract patients was slightly better than small incision cataract extracapsular extraction in correcting astigmatism,improving visual acuity,and regulating macular thickness.However,due to the high energy of ultrasonic emulsification,the risk of complications such as high postoperative intraocular pressure was higher.Small-incision extracapsular cataract extraction has better application value in economically disadvantaged areas.

Optimal Ultrasonic Extraction of Pachyman from Jiuzihe Poria cocos

This study was conducted to extract pachyman to the greatest degree with ultrasonic technology, and to determine the content of pachyman by the phe-nol-sulfuric acid method, so as to choose the optimal technique of ultrasonic extrac-tion of pachyman. Firstly, the ultrasonic power, extraction time and solid-to-liquid ra-tio were investigated by ultrasonic extraction method. Then, on this basis, a respon-sible surface experiment was designed, to select the optimal process conditions ac-cording to the index of pachyman yield. The optimized ultrasonic water extraction conditions were as fol ow： ultrasonic power of 100 W, extraction time of 30 min, and solid-to-liquid ratio at 1：40. The Oxford cup method was used to study the an-timicrobial activity of pachyman. lt was found that pachyman could significantly in-hibit Bacilus subtilis_and Staphylococcus aureus.

Optimal ultrasonic extraction condition and determination of polysaccharides in Tilia amurensis flowers

Seven extracting temperatures （25, 35, 45, 55, 65, 75, 85℃） and extracting time （30, 40, 50, 60, 70, 80, 90 min） were designed for selecting the optimal extracting time and extracting temperature for ultrasonic extraction of T. amurensis flowers. Polysaccharides from T. amurensis flowers were isolated and determined by spectrophotometry. Results show that the optimal ultrasonic temperature was 75℃ and ex tracting time 52 min. The content of polysaccharides in T. amurensis flowers measured by anthrone--H2SO4 colorimetry under 580 nm, was 9.74% with 0.47% of relative standard deviation （RSD, n=3）. This study demonstrated that ultrasonic extraction method was simple, and the color of the treated samples was stable in 4 h. The average recovery value for the polysaccharides measured was 99.48%±1.01%, with 0.112% of RSD （n=3）.

Ultrasonic Assisted Extraction of Anthocyanins from Strawberry

This study aimed to explore the main factors influencing the extraction of anthocyanins from strawberry, such as solid-liquid ratio, concentration of solvent, duration of ultrasonic treatment and ultrasonic power. According to the results of sin-gle factor test, an orthogonal experiment was designed to determine the optimum extraction conditions. The effects of the four factors on anthocyanins extraction from strawberry were listed here in an decreasing order： ethanol concentration 〉 solid-liq-uid ratio〉duration of ultrasonic treatment〉ultrasonic power. And the optimal condi-tions of ultrasonic extraction of anthocyanins from strawberry were： ultrasonic treat-ment of 30 min, solid-liquid ratio of 1：15, ethanol concentration of 60% and ultra-sonic power of 300 W. Under such conditions, the content of extracted antho-cyanins was 33.247 mg/100g, which was 1.3 folds higher than that by extraction without ultrasonic treatment.

An experimental study exploring the influencing factors for ultrasonic-assisted extraction of flavonoid compounds from leaves of Amorpha fruticosa L.

In this paper,the ultrasonic-assisted extraction process of flavonoid compounds from leaves of Amorpha fruticosa is optimized.In single factor experiments,solid/liquid ratios,ultrasonic power,ethanol concentrations and extraction cycles were experimental factors.Box–Behnken central composite design and RSM analyzed the effects of the four factors on the yield of total flavonoids.The optimal extraction parameters were solid/liquid ratio 1:50 g/mL,ultrasonic power 316 W,ethanol concentration 50%,4 extraction cycles.In the optimized condition,the estimated value of the regression model was 66.6456 mg/g while the measured value was 66.4329 mg/g.

Polyphenols extracted from Aronia melanocarpa by combined enzymatic and ultrasonication and their antioxidant potential and antimicrobial activity

The extraction of polyphenols from Aronia melanocarpa was carried out using a combination of enzymatic and ultrasound.After single-factor and orthogonal design and experiment,the optimized polyphenol extraction conditions were 1%enzyme,1:40 material-to-liquid ratio,55℃,60 min ultrasonication,70%ethanol,and the final extraction amount was 88.634 mg/g,which displayed a 25.15%and 34.08%improvement compared with the single ultrasonication and enzymatic extraction methods,respectively.Significant antibacterial effects of polyphenols were shown against Staphylococcus aureus,Escherichia coli and Bacillus subtilis.Further antioxidation effects were evaluated,and the superoxide anion radical scavenging rate,hydroxyl radical scavenging rate and DPPH free radical scavenging rate reached 45.2%,83.5%and 85.4%,respectively.This combined enzymatic and ultrasonic extraction method exhibited the advantages of high extraction rate,saving solvent consumption and extraction time,but also provided a new method for the development and utilization of natural antimicrobial and antioxidant health products.

Extraction of Organochlorine Pesticides in Sediments Using Soxhlet,Ultrasonic and Accelerated Solvent Extraction Techniques

The application of soxhlet, ultrasonic and accelerated solvent extractiontechniques to the analysis of six organochlorine pesticides (α-HCH, β-HCH, γ-HCH, o, p'-DDT,p,p'-DDT and p,p'-DDE) in Taihu Lake sediment samples is described. It was found that the limits ofquantification ranged from 0.002 μg g^(-1) to 0.004 μg g^(-1), and the recoveries oforganochlorine pesticides with the three extraction techniques were acceptable ( 】80.7%). With amass selective detector, better results were obtained by accelerated solvent extraction usinghexane-acetone (1:1) as compared with soxhlet and ultrasonic extraction. It was shown that theaccelerated solvent extraction was the optimum technique for the analysis of organochlorinepesticides in sediments. The general features of the three extraction techniques are also presented.

Ultrasonic Extraction of Polysaccharides from Laminaria japonica and Their Antioxidative and Glycosidase Inhibitory Activities

In the present study, ultrasonic extraction technique （UET） is used to improve the yield of polysaccharides from Lami- naria japonica （LJPs）. And their antioxidative as well as glycosidase inhibitory activities are investigated. Box-Behnken design （BBD） combined with response surface methodology （RSM） is applied to optimize ultrasonic extraction for polysaccharides. The optimized conditions are obtained as extraction time at 54 min, ultrasonic power at 1050 W, extraction temperature at 80℃ and ratio of material to solvent at 1：50 （g mL-1）. Under these optimal ultrasonic extraction conditions, an actual experimental yield （5.75% ＋ 0.3%） is close to the predicted result （5.67%） with no significant difference （P〉0.05）. Vitro antioxidative and glycosidase inhibitory activities tests indicate that the crude polysaccharides （LJP） and two major ethanol precipitated fractions （LJP1 and LJP2） are in a concentration-dependent manner. LJP2 （30%-60% ethanol precipitated polysaccharides） possesses the strongest α-glucosidase in- hibitory activity and moderate scavenging activity against hydroxyl radicals （66.09% ±2.19%, 3.0 mg mL-l）. Also, the inhibitory activity against a-glucosidase （59.08% ± 3.79%, 5.0 mg mL-1） is close to that of acarbose （63.99% ± 3.27%, 5.0 mg mL-l）. LJP 1 （30% ethanol precipitated polysaccharides） exhibits the strongest scavenging activity against hydroxyl radicals （99.80%q-0.00%, 3.0mg mL-1） and moderate a-glucosidase inhibitory activity （47.76%± 1.92%, 5.0 mgmL-1）. LJP shows the most remarkable DPPH scav- enging activity （66.20%±0.11%, 5.0mgmL-1） but weakest a-glucosidase inhibitory activity （37.77%±1.30%, 5.0mgmL-1）. How- ever, all these LJPs exert weak inhibitory effects against a-amylase. These results show that UET is an effective method for extract- ing bioactive polysaccharides from seaweed materials. LJP 1 and LJP2 can be developed as a potential ingredient in hypoglycemic agents or functional food for the management of diabetes. This study provides scientific evidence and advances in the preparation technology and a hypoglycemic activities evaluation method for seaweed polysaccharides, especially glycosidase inhibition in com- bination with an antioxidative activity evaluation method.

The Optimization of Ultrasonic Extraction Technology of Total Flavonoids in Leaves of Mallotus apelta by Response Surface Analysis Methodology

[Objectives] Response surface analysis methodology was used to optimize the extraction technology of total flavonoids from Mallotus apelta leaves. [Methods] The total flavonoids were extracted using ultrasonic assisted ethanol extraction,and extraction rate of total flavonoids was taken as evaluation index. On the basis of single-factor experiment,Box-Behnken response surface methodology was employed for selecting the optimum extraction process. [Results]The optimum extraction conditions of total flavonoids were as follows: 75% of ethanol concentration,1∶ 25 of ratio of material to liquid,31 min of ultrasonic time. Under these conditions,the extraction rate of total flavonoids was 1. 115%.[Conclusions] The extraction process obtained by response surface methodology was stable,reasonable,accurate and reliable. It was a feasible method to extract the total flavonoids from M. apelta leaves.

Rapid determination of volatile constituents in safflower from Xinjiang and Henan by ultrasonic-assisted solvent extraction and GC-MS

The total volatile components were extracted from safflower by ultrasonic-assisted solvent extraction （USE） and their chemical constituents were analyzed by gas chromatographymass spectrometry （GC-MS） to provide scientific basis for the quality control of safflower. Five different solvents （diethyl ether, ethanol, ethyl acetate, dichloromethane and acetone） were used and compared in terms of number of volatile components extracted and the peak areas of these components in TIC. The results showed that USE could be used as an efficient and rapid method for extracting the volatile components from safflower. It also could be found that the number of components in the TIC of ethyl acetate extract was more than that in the TIC of other solvent ones. Meanwhile, the volatile components of safflower from Xinjiang Autonomous Region and Henan Province of China were different in chemical components and relative contents. It could be concluded that both the extraction solvents and geographical origin of safflower are responsible for these differences. The experimental results also indicated that USE/GC-MS is a simple, rapid and effective method to analyze the volatile oil components of safflower.

Study on Ultrasonic Extraction of Total Flavonoids from Angelica keiskei Koidzumi

[Objective] This study aimed to optimize the ultrasonic extraction process of total flavonoids from Angelica keiskei Koidzumi. [Method] Using the yield of total flavonoids as an indicator, the ultrasonic extraction process of total flavonoids from A. keiskei was optimized by orthogonal experimental design. [ Result ] Among four factors in orthogonal experimental design, extraction time exhibited the most significant effect on the extraction result; ethanol concentration exhib- ited a significant effect on the extraction result; ultrasonic power and solid-to-liquid ratio had no significant effect. The optimal conditions for ultrasonic extraction of total flavonoids from A. keiskei were extraction time of 25 min, ethanol concentration of 80%, ultrasonic power of 60 W, solid-to-liquid ratio of 1：20 （g/ml）, under which the yield of total flavonoids reached 1.56%. [ Conclusion] This study provides the basis for further development and utilization of total flavonoids from A. keiskei.

Feature extraction of wood-hole defects using wavelet-based ultrasonic testing

The primary bottleneck to extracting wood defects during ultrasonic testing is the accuracy of identifying the wood defects. The wavelet energy moment was used to extract defect features of artificial wood holes drilled into 120 elm samples that differed in the number of holes to verify the validity of the method. Wavelet energy moment can reflect the distribution of energy along the time axis and the amount of energy in each frequency band,which can effectively extract the energy distribution characteristics of signals in each frequency band; therefore,wavelet energy moment can replace the wavelet frequency band energy and constitute wood defect feature vectors. A principal component analysis was used to normalize and reduce the dimension of the feature vectors. A total of 16 principal component features were then obtained, which can effectively extract the defect features of the different number of holes in the elm samples.

Ultrasonic Nebulization Extraction Coupled with Gas Chromatography-Mass Spectrometry for Analysis of Volatile Components in Traditional Chinese Patent Medicine

The ultrasonic nebulization extraction（UNE） was developed and applied to the extraction of volatile components from traditional Chinese patent medicine Xiaoyao Pills. Several parameters of ultrasonic nebulization extraction including the sample particle size, solvent volume, extraction time and ultrasonic power were studied and selected. As a result, 2.4 g of sample with particle size of 80 mesh was extracted with 15 mL of n-hexane for 20 min at an ultrasonic power of 35 W. The volatile components were analyzed by gas chromatography-mass spectrometry （GC-MS） under the optimal conditions and 57 compounds were identified. The precision, repeatability and stability of the proposed method were also studied. Compared with ultrasonic-assisted extraction（UAE） and hydrodistillation（HD） extraction, the proposed method is more efficient, faster and easier to be operated at room temperature with smaller sample and energy consumption. It is suggested that the ultrasonic nebulization extraction can be used as a novel alternative method for the extraction of volatile components from traditional Chinese patent medicine.

FEATURE EXTRACTION OF BONES AND SKIN BASED ON ULTRASONIC SCANNING

In the prosthetic socket design, aimed at the high cost and radiation deficiency caused by CT scanning which is a routine technique to obtain the cross-sectional image of the residual limb, a new ultrasonic scanning method is developed to acquire the bones and skin contours of the residual limb. Using a pig fore-leg as the scanning object, an overlapping algorithm is designed to reconstruct the 2D cross-sectional image, the contours of the bone and skin are extracted using edge detection algorithm and the 3D model of the pig fore-leg is reconstructed by using reverse engineering technology. The results of checking the accuracy of the image by scanning a cylinder work pieces show that the extracted contours of the cylinder are quite close to the standard circumference. So it is feasible to get the contours of bones and skin by ultrasonic scanning. The ultrasonic scanning system featuring no radiation and low cost is a kind of new means of cross section scanning for medical images.

A Study on the Ultrasonic Extraction and Antioxidant Activity of Lychee Pericarp Polysaccharides

The aim was to optimize ultrasonic extraction conditions and study antioxidant activities of lychee pericarp polysaccharides. The effects of extraction temperature,time,ultrasonic power,solid-liquid ratio on polysaccharides yield were investigated by single-factor experiment and orthogonal experiment to obtain optimum extraction conditions; the antioxidant activities of lychee pericarp polysaccharides were evaluated by the total antioxidant activity. Optimum extraction process was under extraction temperature of 80 ℃,extraction time of 2. 5 h,ultrasonic power of 180 W,solid-liquid ratio of 1∶ 25 g / m L; the total antioxidant activity was increased with the increasing concentration of polysaccharides. The extraction process is simple and efficient. The extraction rate of lychee pericarp polysaccharides with antioxidant activities is high.

Optimization of Ultrasonic Extraction Process of Polysaccharides from Polyporus umbellatus

[ Objective] This study aimed to investigate the optimal conditions for ultrasonic extraction of polysaccharides from Polyporus umbeUatus, thus providing a reliable basis for the development and utilization of P. umbellatus. [ Method ] By single-factor experiment, the ultrasonic extraction process of polyperus pelysac- charides was optimized. [Result] The optimal conditions for ultrasonic extraction of polysaccharides from P. umbeUatus were： solid-liquid ratio 1：40 （g： ml）, ex- traction duration 60 rain, extraction temperature 70 ℃, ultrasonic power 100 W. [ Conclusion] Compared with conventional water extraction method, ultrasonic ex- traction could significantly improve the content of polyporus polysaccharides with shorter extraction duration, lower solid-liquid ratio and lower extraction tempera-

The Optimization of Ultrasonic Extraction Process of Total Flavonoids from Rhodiola Crenulata by Response Surface Method

[Objectives]To study the optimal extraction process of total flavonoids in Rhodiola rosea L.,and further facilitate the development and utilization of Rhodiola rosea L. [Methods]With Rhodiola crenulata as raw material,ethanol as extractant,ultrasonic extraction as the extraction method,the single factor method was first used for preliminary investigation of effect of ethanol volume fraction,solid-liquid ratio,extraction temperature and extraction time on the flavonoids extraction rate,and then the Box-Behnken response surface method was used to optimize the extraction process of total flavonoids in R. crenulata. [Results] The optimal extraction conditions: ethanol concentration of 72%;solid-liquid ratio of 1∶ 43; extraction temperature of 66℃; extraction time of 50 min. Under these conditions,the extraction rate of total flavonoids from R. crenulata was 2. 591%. [Conclusions] The results showed that the method of response surface was reasonable and feasible for the optimization of ultrasonic extraction of total flavonoids from R. crenulata.

Optimization on Ultrasonic Extraction Method of Total Flavonoids for Liriodendron chinense Sarg.×L.tulipifera L. by Response Surface Methodology (RSM)

With the leaves,bark and roots of Liriodendron chinense Sarg.× L.tulipifera L.as experiment materials,the ultrasonic-assisted extraction conditions of total flavonoids were optimized by response surface Box-Behnken test design.Ultrasonic time and liquid-to-solid ratio had significant effects on the extraction amount of flavonoids from the leaves of L.chinense Sarg.× L.tulipifera L.;ultrasonic temperature and liquid-to-solid ratio had an interaction on the extraction amount of flavonoids;and the optimum ultrasonic time,temperature and liquid-to-solid ratio for the extraction of flavonoids from leaves of L.chinense Sarg.× L.tulipifera L.were 19.82 min,28.60 ℃ and 9.48 ml/g,respectively.Ultrasonic time,temperature and liquid-to-solid ratio had significant effects on the extraction amount of flavonoids from L.chinense Sarg.× L.tulipifera L.;there was a significant interaction between any two of the factors,which had a significant effect on the extraction of flavonoids;and the optimum extraction parameters for flavonoids in the bark were the ultrasonic time of 33.66 min,the ultrasonic temperature at 32.85 ℃ and the liquid-to-solid ratio of 11.39 ml/g.Ultrasonic time and liquid-to-solid ratio had significant effects on the extraction of flavonoids from roots;there was a significant interaction between ultrasonic time and liquid-to-solid ratio and between ultrasonic temperature and liquid-to-solid ratio;and the optimum extraction parameters for flavonoids from the roots of L.chinense Sarg.× L.tulipifera L.were the ultrasonic time of 32.38 min,the ultrasonic temperature at 25.0 ℃ and the liquid-to-solid ratio of 8.00 ml/g.The results of the three models were stable.The models are feasible and have good application value.