Study on Extraction of Oolong Tea Assisted by Ultrasonic Wave and 4C Technique and Its Application

[Objectives]The extraction conditions of formula oolong tea were investigated by an orthogonal experiment.[Methods]The technical conditions were optimized by the 4C method,and the application of formula oolong tea extract in cigarettes was studied.[Results]①In the experimental range,the best sensory evaluation effect of formula oolong tea extract was obtained with extraction conditions of 70%ethanol as extraction solvent,extraction time h,extraction temperature 25℃,and ultrasonic frequency 80 kHz,and follow-up low-temperature concentration,low-temperature sedimentation and low-temperature centrifugation.②The effects of different centrifugal speeds on the quality of formula oolong tea extract were explored.The formula oolong tea extract obtained under the conditions of 3000 r/min and centrifugal time of 10 min showed the best evaluation effect with soft and delicate smoke,rich smoke fragrance,good comfort and refreshing mouthfeel.③The effective aroma components in the formula oolong tea extract were qualitatively analyzed by GC-MS.[Conclusions]This study provides high-quality raw materials and a theoretical basis for the research of independent flavor blending in cigarette industry enterprises.

Analysis of Ultrasonic Emulsification Surgery and Small Incision Cataract Extracapsular Extraction Surgery for Cataract Clinical Treatment Level Improvement

Objective:To analyze the efficacy of ultrasonic emulsification and small incision cataract extracapsular extraction in cataract patients.Methods:96 cataract patients admitted from May 2021 to May 2023 were selected and randomly grouped into group A(ultrasonic emulsification)and group B(small-incision extracapsular cataract extraction),with 48 cases each.Results:At 1 week,1-month,and 3 months post-operation,the visual acuity of group A was higher and the astigmatism value was lower than that of group B(P<0.05);at 12h,24h,and 48h post-operation,the intraocular pressure of group A was higher than that of group B(P<0.05);the thickness of macular area of group A was lower than that of group B at 1 week and 1-month post-operation(P<0.05).Conclusion:Ultrasonic emulsification in cataract patients was slightly better than small incision cataract extracapsular extraction in correcting astigmatism,improving visual acuity,and regulating macular thickness.However,due to the high energy of ultrasonic emulsification,the risk of complications such as high postoperative intraocular pressure was higher.Small-incision extracapsular cataract extraction has better application value in economically disadvantaged areas.

Profiling the effects of microwave-assisted and soxhlet extraction techniques on the physicochemical attributes of Moringa oleifera seed oil and proteins

There is a constant search for biomaterials from natural products like plants for food and industrial applications.The work embodied in this report aimed at investigating the effects of microwave-assisted and soxhlet extraction(MAE and SE) techniques on the functional physicochemical quality characteristics of Moringa oleifera seed oil and proteins extracts. M. oleifera seeds were ground to fine powders and oil was extracted by microwave-assisted and soxhlet extraction techniques using petroleum ether. Quality attributes including yield percent, moisture content,iodine, saponification, specific gravity, viscosity, p H, thiobarbituric acid, acid and peroxide values were measured. Mineral and vitamin contents, chemical/functional groups, fatty acid(FA) composition, and reducing power of the oil were evaluated. Metabolomics of protein extracted from the defatted powders were analyzed by nuclear magnetic resonance(NMR). M. oleifera oil from MAE and SE methods had good yield(34.25 ± 0.0%,28.75 ± 0.0%), low moisture content(0.008 ± 0.0%, 0.011 ± 0.0%), non-drying and unsaturated, moderately saponified, less dense(0.91 ± 0.01, 0.92 ± 0.02 g m L^(-1)), had Newtonian flow, were weakly acidic, showed good content of FAs, recorded strong potential for long shelf-life, showed stability against oxidative rancidity and enzymatic hydrolysis, had very rich deposits of micro-and macro-nutrients as well as water-soluble and lipidsoluble vitamins, and functional groups in the oil were reflective of its content of long-and medium-chain triglycerides(LCT and MCT). Monounsaturated and saturated fatty acids(MUFA and SFA) were detected and the oil has excellent ferric ion reducing power. NMR metabolomic assay revealed the presence of nine essential amino acids(EAAs) in the protein extract. MAE technique is a feasible and acceptable alternative for high throughput extraction of M. oleifera oil with high yield and excellent quality attributes. The study revealed that MAE did not impart any remarkable advantage(s) on the physicochemical properties of M. oleifera seed oil and protein compared to SE technique.

An experimental study exploring the influencing factors for ultrasonic-assisted extraction of flavonoid compounds from leaves of Amorpha fruticosa L.

In this paper,the ultrasonic-assisted extraction process of flavonoid compounds from leaves of Amorpha fruticosa is optimized.In single factor experiments,solid/liquid ratios,ultrasonic power,ethanol concentrations and extraction cycles were experimental factors.Box–Behnken central composite design and RSM analyzed the effects of the four factors on the yield of total flavonoids.The optimal extraction parameters were solid/liquid ratio 1:50 g/mL,ultrasonic power 316 W,ethanol concentration 50%,4 extraction cycles.In the optimized condition,the estimated value of the regression model was 66.6456 mg/g while the measured value was 66.4329 mg/g.

MICROWAVE-ASSISTED EXTRACTION OF GLYCYRRHIZIC ACID FROM LICORICE ROOT-EFFECT OF THE PROPERTY OF SOLUTION ON EXTRACTION OF GA

The property of extraction solution is an important factor influencing the extraction efficiency. In the present work, the effect of the property of solution on extraction of GA was studied, which including the concentration of ethanol, ammonia and cation (M+), pH of extraction solution, different kinds of organic solvent etc. The results show that 50%-60%(v/v) ethanol can reach high percentage extraction of GA. If 1% (v/v) ammonia solution was added into 60%(v/v) ethanol, the percentage extraction can be increased from 2.0% to 2.31%. Without ammonia, 50mmol/L [M+] (M+ = K+, NH4+) was added into 60%(v/v) ethanol, percentage extraction of GA can reach about 2.26%. If pH of solution (60% ethanol) was adjust to pH=4.0, it can reach high percentage extraction. If pH of solution (60% ethanol + 50mmol [M+], pH=6.1) was adjust tO PH=4.0, especially M+ is K+ or NH4+, it can reach almost same extraction efficiency as that of 1% ammonia solution + 60% ethanol, and the operation environment can be greatly improved.

Polyphenols extracted from Aronia melanocarpa by combined enzymatic and ultrasonication and their antioxidant potential and antimicrobial activity

The extraction of polyphenols from Aronia melanocarpa was carried out using a combination of enzymatic and ultrasound.After single-factor and orthogonal design and experiment,the optimized polyphenol extraction conditions were 1%enzyme,1:40 material-to-liquid ratio,55℃,60 min ultrasonication,70%ethanol,and the final extraction amount was 88.634 mg/g,which displayed a 25.15%and 34.08%improvement compared with the single ultrasonication and enzymatic extraction methods,respectively.Significant antibacterial effects of polyphenols were shown against Staphylococcus aureus,Escherichia coli and Bacillus subtilis.Further antioxidation effects were evaluated,and the superoxide anion radical scavenging rate,hydroxyl radical scavenging rate and DPPH free radical scavenging rate reached 45.2%,83.5%and 85.4%,respectively.This combined enzymatic and ultrasonic extraction method exhibited the advantages of high extraction rate,saving solvent consumption and extraction time,but also provided a new method for the development and utilization of natural antimicrobial and antioxidant health products.

The Optimization of Ultrasonic Extraction Technology of Total Flavonoids in Leaves of Mallotus apelta by Response Surface Analysis Methodology

[Objectives] Response surface analysis methodology was used to optimize the extraction technology of total flavonoids from Mallotus apelta leaves. [Methods] The total flavonoids were extracted using ultrasonic assisted ethanol extraction,and extraction rate of total flavonoids was taken as evaluation index. On the basis of single-factor experiment,Box-Behnken response surface methodology was employed for selecting the optimum extraction process. [Results]The optimum extraction conditions of total flavonoids were as follows: 75% of ethanol concentration,1∶ 25 of ratio of material to liquid,31 min of ultrasonic time. Under these conditions,the extraction rate of total flavonoids was 1. 115%.[Conclusions] The extraction process obtained by response surface methodology was stable,reasonable,accurate and reliable. It was a feasible method to extract the total flavonoids from M. apelta leaves.

Microwave-assisted Extraction of Rutin and Quercetin from Flos Sophorae

Three microwave-assisted extraction(MAE) procedures were studied. The first procedure was household microwave oven dynamic extraction(HMODE). The second procedure was special microwave oven bath extraction(SMOBE). The third procedure was microwave resonant cavity dynamic extraction(MRCDE). The results obtained by the three microwave-assisted extraction procedures were compared with those obtained by using traditional Soxhlet extraction. The results indicate that the MAE not only took a shorter time, but also simplified the procedure, and made the extraction a higher yield. At the same time the results obtained by the three MAE procedures were also compared with each other.

Response surface optimization of microwave-assisted extraction for HPLC-fluorescence determination of puerarin and daidzein in Radix Puerariae thomsonii

Microwave-assisted extraction was optimized with response surface methodology for HPLC-fluorescence determination of puerarin and daidzein in Radix Puerariae thomsonii.The optimized extraction procedure was achieved by soaking the sample with 70% methanol（1∶15,v/v）for 30 min,and then microwave irradiation for 11 min at a power of 600 W.Coupling the extraction process with HPLC-fluorescence presented good recovery,satisfactory precision,and good linear relation.Compared with a method from the Chinese Pharmacopoeia,the proposed method enables higher extraction efficiency and more accurate analytical results.It can be of potential value in quality assessment of Radix Puerariae thomsonii medicinal materials.

Microwave-assisted solvent extraction of castor oil from castor seeds

This study was aimed at evaluating the physicochemical properties and oxidation stability of castor oil using microwave-assisted solvent extraction(MAE). MAE was performed using 5% ethanol in hexane as solvent at different extraction times, power intensities and solvent-to-feed(S/F, ml of solvent to gram of feed) ratios.The process parameters were optimized by statistical approach using historical data design of response surface method(RSM). The oils were characterized for yield, physicochemical properties, dielectric properties and oxidation stability, and comparison was also made with oil extracted using Soxhlet method. Results show that the maximum oil yield of 37% was obtained at 20 min with microwave power intensity of 330 W and S/F ratio of 20. The main fatty acid composition of castor oil is ricinoleic acid. The density, refractive index, dielectric properties and oxidation stability of oils are not affected by the extraction methods and extraction parameters of MAE. However, the MAE-extracted oil is more viscous compared to that by Soxhlet method. With extra caution on oil oxidation, MAE could be a promising solvent extraction method with an 86% less in processing time and a higher yield.

Optimization of microwave-assisted extraction of bioactive alkaloids from lotus plumule using response surface methodology

In this work,a fast and efficient microwave-assisted extraction(MAE) method was developed to extract main bioactive alkaloids from lotus plumue.To optimize MAE conditions,three main factors were selected using univariate approach experiments,and then central composite design(CCD).The optimal extraction conditions were as follows:methanol concentration of 65%,microwave power of 200 W,and extraction time of 260 s.A high performance liquid chromatography–diode array detector(HPLC–DAD) method was established to quantitatively analyze these phytochemicals in different lotus plumule samples and in different part of lotus.Chromatographic separation was carried out on an Agilent Zorbax Extend-C_(18) column(4.6 mm×150 mm,3.5 μm).Gradient elution was applied with the mobile phase constituted with 0.1% triethylamine in water(A)and acetonitrile(B):40%-70% B at 0-8 min,70%-100% B at 8–9 min,100% B for 2 min,and then equilibrated with 40% B for 2 min.

Rapid determination of volatile constituents in safflower from Xinjiang and Henan by ultrasonic-assisted solvent extraction and GC-MS

The total volatile components were extracted from safflower by ultrasonic-assisted solvent extraction （USE） and their chemical constituents were analyzed by gas chromatographymass spectrometry （GC-MS） to provide scientific basis for the quality control of safflower. Five different solvents （diethyl ether, ethanol, ethyl acetate, dichloromethane and acetone） were used and compared in terms of number of volatile components extracted and the peak areas of these components in TIC. The results showed that USE could be used as an efficient and rapid method for extracting the volatile components from safflower. It also could be found that the number of components in the TIC of ethyl acetate extract was more than that in the TIC of other solvent ones. Meanwhile, the volatile components of safflower from Xinjiang Autonomous Region and Henan Province of China were different in chemical components and relative contents. It could be concluded that both the extraction solvents and geographical origin of safflower are responsible for these differences. The experimental results also indicated that USE/GC-MS is a simple, rapid and effective method to analyze the volatile oil components of safflower.

Study on Ultrasonic Extraction of Total Flavonoids from Angelica keiskei Koidzumi

[Objective] This study aimed to optimize the ultrasonic extraction process of total flavonoids from Angelica keiskei Koidzumi. [Method] Using the yield of total flavonoids as an indicator, the ultrasonic extraction process of total flavonoids from A. keiskei was optimized by orthogonal experimental design. [ Result ] Among four factors in orthogonal experimental design, extraction time exhibited the most significant effect on the extraction result; ethanol concentration exhib- ited a significant effect on the extraction result; ultrasonic power and solid-to-liquid ratio had no significant effect. The optimal conditions for ultrasonic extraction of total flavonoids from A. keiskei were extraction time of 25 min, ethanol concentration of 80%, ultrasonic power of 60 W, solid-to-liquid ratio of 1：20 （g/ml）, under which the yield of total flavonoids reached 1.56%. [ Conclusion] This study provides the basis for further development and utilization of total flavonoids from A. keiskei.

Dynamic microwave-assisted extraction combined with liquid phase microextraction based on the solidification of a floating drop for the analysis of organochlorine pesticides in grains followed by GC

A convenient,cost-effective and fast method using dynamic microwave-assisted extraction and liquid phase microextraction based on the solidification of a floating drop was proposed to analyze organochlorine pesticides in grains including rice,maize and millet.Twelve samples can be processed simultaneously in the method.During the extraction process,10%acetonitrile-water solutions containing 110μL of n-hexadecane were used to extract organochlorine pesticides.Subsequently,1.0 g sodium chloride was placed in the extract,and then centrifuged and cooled.The n-hexadecane drops containing the analytes were solidifi ed and transferred for determination by gas chromatography-electron capture detector without any further filtration or cleaning process.Limits of detection for organochlorine pesticides were 0.97–1.01μg/kg and the RSDs were in the range of 2.6%–8.5%.The developed technology has succeeded in analyzing six real grains samples and the recoveries of the organochlorine pesticides were 72.2%–94.3%.Compared with the published extraction methods,the developed method was used to analyze organochlorine pesticides in grains,being more environmentally friendly,which is suitable for the daily determination of organochlorine pesticides.

Feature extraction of wood-hole defects using wavelet-based ultrasonic testing

The primary bottleneck to extracting wood defects during ultrasonic testing is the accuracy of identifying the wood defects. The wavelet energy moment was used to extract defect features of artificial wood holes drilled into 120 elm samples that differed in the number of holes to verify the validity of the method. Wavelet energy moment can reflect the distribution of energy along the time axis and the amount of energy in each frequency band,which can effectively extract the energy distribution characteristics of signals in each frequency band; therefore,wavelet energy moment can replace the wavelet frequency band energy and constitute wood defect feature vectors. A principal component analysis was used to normalize and reduce the dimension of the feature vectors. A total of 16 principal component features were then obtained, which can effectively extract the defect features of the different number of holes in the elm samples.

Comparison of Response Surface Methodology and Artificial Neural Network in Predicting the Microwave-Assisted Extraction Procedure to Determine Zinc in Fish Muscles

In this paper, the estimation capacities of the response surface methodology (RSM) and artificial neural network (ANN), in a microwave-assisted extraction method to determine the amount of zinc in fish samples were investigated. The experiments were carried out based on a 3-level, 4-variable Box–Behnken design. The amount of zinc was considered as a function of four independent variables, namely irradiation power, irradiation time, nitric acid concentration, and temperature. The RSM results showed the quadratic polynomial model can be used to describe the relationship between the various factors and the response. Using the ANN analysis, the optimal configuration of the ANN model was found to be 4-10-1. After predicting the model using RSM and ANN, two methodologies were then compared for their predictive capabilities. The results showed that the ANN model is much more accurate in prediction as compared to the RSM.

Application and research advancement on the microwave-assisted extraction

This paper summarized application and research advancement of the microwave-assisted extraction in the agriculture, food industry, environmental analytical chemistry, traditional Chinese medicine industry, and so on. The microwave-assisted extraction was manifested to be a simple device, wide area of application, high extraction efficiency, good reproducibility and low consumption of agent and time as well as low environmental pollution. At present, industrialization question of the microwave-assisted extraction technology has been attached importance, which will impel the microwave-assisted extraction technology to more development in the future

Ultrasonic Nebulization Extraction Coupled with Gas Chromatography-Mass Spectrometry for Analysis of Volatile Components in Traditional Chinese Patent Medicine

The ultrasonic nebulization extraction（UNE） was developed and applied to the extraction of volatile components from traditional Chinese patent medicine Xiaoyao Pills. Several parameters of ultrasonic nebulization extraction including the sample particle size, solvent volume, extraction time and ultrasonic power were studied and selected. As a result, 2.4 g of sample with particle size of 80 mesh was extracted with 15 mL of n-hexane for 20 min at an ultrasonic power of 35 W. The volatile components were analyzed by gas chromatography-mass spectrometry （GC-MS） under the optimal conditions and 57 compounds were identified. The precision, repeatability and stability of the proposed method were also studied. Compared with ultrasonic-assisted extraction（UAE） and hydrodistillation（HD） extraction, the proposed method is more efficient, faster and easier to be operated at room temperature with smaller sample and energy consumption. It is suggested that the ultrasonic nebulization extraction can be used as a novel alternative method for the extraction of volatile components from traditional Chinese patent medicine.

FEATURE EXTRACTION OF BONES AND SKIN BASED ON ULTRASONIC SCANNING

In the prosthetic socket design, aimed at the high cost and radiation deficiency caused by CT scanning which is a routine technique to obtain the cross-sectional image of the residual limb, a new ultrasonic scanning method is developed to acquire the bones and skin contours of the residual limb. Using a pig fore-leg as the scanning object, an overlapping algorithm is designed to reconstruct the 2D cross-sectional image, the contours of the bone and skin are extracted using edge detection algorithm and the 3D model of the pig fore-leg is reconstructed by using reverse engineering technology. The results of checking the accuracy of the image by scanning a cylinder work pieces show that the extracted contours of the cylinder are quite close to the standard circumference. So it is feasible to get the contours of bones and skin by ultrasonic scanning. The ultrasonic scanning system featuring no radiation and low cost is a kind of new means of cross section scanning for medical images.

A Study on the Ultrasonic Extraction and Antioxidant Activity of Lychee Pericarp Polysaccharides

The aim was to optimize ultrasonic extraction conditions and study antioxidant activities of lychee pericarp polysaccharides. The effects of extraction temperature,time,ultrasonic power,solid-liquid ratio on polysaccharides yield were investigated by single-factor experiment and orthogonal experiment to obtain optimum extraction conditions; the antioxidant activities of lychee pericarp polysaccharides were evaluated by the total antioxidant activity. Optimum extraction process was under extraction temperature of 80 ℃,extraction time of 2. 5 h,ultrasonic power of 180 W,solid-liquid ratio of 1∶ 25 g / m L; the total antioxidant activity was increased with the increasing concentration of polysaccharides. The extraction process is simple and efficient. The extraction rate of lychee pericarp polysaccharides with antioxidant activities is high.