Preventing formation of intermetallic compounds in ultrasonic-assisted Sn soldering of Mg/Al alloys through pre-plating a Ni coating layer on the Mg substrate

Magnesium and aluminum alloys are widely used in various industries because of their excellent properties,and their reliable connection may increase application of materials.Intermetallic compounds(IMCs)affect the joint performance of Mg/Al.In this study,AZ31 Mg alloy with/without a nickel(Ni)coating layer and 6061 Al alloy were joined by ultrasonic-assisted soldering with Sn-3.0Ag-0.5Cu(SAC)filler.The effects of the Ni coating layer on the microstructure and mechanical properties of Mg/Al joints were systematically investigated.The Ni coating layer had a significant effect on formation of the Mg_(2)Sn IMC and the mechanical properties of Mg/Al joints.The blocky Mg_(2)Sn IMC formed in the Mg/SAC/Al joints without a Ni coating layer.The content of the Mg_(2)Sn IMC increased with increasing soldering temperature,but the joint strength decreased.The joint without a Ni coating layer fractured at the blocky Mg_(2)Sn IMC in the solder,and the maximum shear strength was 32.2 MPa.By pre-plating Ni on the Mg substrate,formation of the blocky Mg_(2)Sn IMC was inhibited in the soldering temperature range 240–280℃and the joint strength increased.However,when the soldering temperature increased to 310℃,the blocky Mg_(2)Sn IMC precipitated again in the solder.Transmission electron microscopy showed that some nano-sized Mg_(2)Sn IMC and the(Cu,Ni)_(6)Sn_(5)phase formed in the Mg(Ni)/SAC/Al joint soldered at 280℃,indicating that the Ni coating layer could no longer prevent diffusion of Mg into the solder when the soldering temperature was higher than 280℃.The maximum shear strength of the Mg(Ni)/SAC/Al joint was 58.2 MPa for a soldering temperature of 280℃,which was 80.7%higher than that of the Mg/SAC/Al joint,and the joint was broken at the Mg(Ni)/SAC interface.Pre-plating Ni is a feasible way to inhibit formation of IMCs when joining dissimilar metals.

Adenosine cyclic phosphate with ultrasonic-assisted pectinase extraction alleviated allergic reactions in RBL-2H3 through inhibiting the influx of intracellular Ca^(2+)

Jujube contains abundant cyclic adenosine monophosphate(cAMP)and the ultrasonic-assisted pectinase extraction(UAPE)conditions for obtaining the maximum cAMP yield from jujube were optimized.Orthogonal array design was applied to evaluate the effects of 4 variables by UAPE on cAMP yield.The results showed that the optimal cAMP yield(783.0μg/g)was derived at ratio of liquid to solid 5 mL/g,ratio of pectinase to raw material 1.5%,time 60 min and temperature 40℃.Moreover,the effect of cAMP on the anti-allergic function of action induced by immunoglobulin E(IgE)and its meschanism was investigated through establishing the sensitized cell model in rat basophilic leukemia(RBL-2 H3)cells using dinitrophenylated(DNP)-bovine serum albumin(BSA)-IgE.The results showed that cAMP interfered with sensitized cells,effectively inhibited the occurrence of basophil degranulation in dose dependence,and significantly reduced the activity ofβ-hexosamindase(β-hex),at the optimal concentration of 50μg/mL.The level of anti-inflammatory factor interleukin-10(IL-10)was promoted and the content of pro-inflammatory factor tumor necrosis factor-α(TNF-α)was suppressed by cAMP.In addition,influx of intracellular Ca^(2+) was repressed effectively.Our results demonstrate that jujube cAMP regulated the cytokine balance in the allergy pathway through blocking the influx of extracellular Ca^(2+),with the prevention of allergy symptoms.

Microstructure evolution and mechanical properties of ultrasonic-assisted soldering joints of 2024 aluminum alloys

Ultrasonic-assisted soldering of 2024 aluminum alloys using a filler metal of Zn-5Al alloy was investigated at the temperature of 400 ℃,which is lower than the solution strengthening temperature of Al-Cu alloys.The ultrasonic vibration with power of 200 W and vibration amplitude of 15 μm at the frequency of 21 kHz was applied on the top samples.The ultrasonic vibration promoted the dissolution of Al elements in the base metal.The reduction of volume fraction of the eutectic phases in the bonds was investigated by increasing ultrasonic vibration time.As the ultrasonic vibration time increased from 3 s to 30 s,the volume fraction of the eutectic phase in the bonds decreased from 12.9% to 0.9%,and the shear strength of the joints was up to 149-153 MPa,increased by 20%.The improvement of the mechanical properties of joints was discussed based on the modulus and hardness of the phases in the bonds and the fracture of the joints.

Optimization of Ultrasonic-Assisted Extraction Process of Polysaccharides from American Ginseng and Evaluation of Its Immunostimulating Activity

Ultrasonic-assisted extraction （UAE） of American ginseng polysaccharides （AGP） was investigated using response surface methodology. Three-factor-three-level Box-Behnken design was employed to optimize the ultrasonic power, extraction time and ratio of water to raw material to obtain a high AGP yield. The analysis of variance and response surface plots indicated that ultrasonic power was the most important factor affecting the extraction yield. The optimal conditions were ultrasonic power 400 W, extraction time 71 min, and ratio of water to raw material 33 mL g-1. Under these conditions, the yield of AGP was 8.09%, which was agreed closely to the predicted value. Gas chromatography （GC） analysis showed that AGP was composed of arabinose, rhamnose, galactose, glucose, and galacturonic acid. Fourier transform infrared spectra revealed the general characteristic absorption peaks of AGP. In addition, AGP exhibited good immunostimulating activities by up-regulating the production of nitric oxide and cytokines. Compared with hot water extraction, UAE required shorter extraction time and gave a higher extraction yield, without changing the structure and immunostimulating activity of AGP. The results indicated that UAE could be an effective and advisable technique for the large scale production of plant polysaccharides.

Antioxidant and hepatoprotective effects of Ajuga nipponensis extract by ultrasonic-assisted extraction

Objective: To investigate suitable condition for extraction of the active components from Ajuga nipponensis(A. nipponensis). Methods: Orthogonal experimental design was used to determine the optimal extraction parameters for ecdysterones and flavonoids. Finally, the hepatoprotective abilities of A. nipponensis extracts were evaluated by CCl_4-induced animal models. Results:Maximum yields of flavonoids(7.87±0.10) mg/g and ecdysterones(0.73±0.02) mg/g could be obtained when the extraction time was 50 min, the extraction temperature was 60 ℃, and the ratio of sample to 70%(v/v) ethanol was 1:20(w/w). The antioxidant property of A. nipponensis was correlated to the concentration of its extracts. At 5 mg/m L, A. nipponensisextract scavenged 84.8% of DPPH radical and had absorbance values of 2.43±0.04 reducing power. Upon CCl_4-induced liver injury, glutamic oxaloacetic transaminase and glutamic pyruvic transaminase decreased significantly after the mice were treated with A. nipponensis. Histological researches also explained that A. nipponensis reduced the extent of liver lesions induced by CCl_4. Conclusions: A. nipponensis exhibited potent antioxidant activity in chemical experimental models and hepatoprotective effect against CCl_4-induced liver damage.

Formation and elimination of burst phenomenon in ultrasonic-assisted resistance brazing

A two-step ultrasonic-assisted brazing method and its associated apparatus were developed to make 6063 aluminum alloys joints with Al-Si-Mg filler metal. The burst phenomenon and the effect of ultrasonic direction and time, as well as the welding joint geometry on the burst phenomenon were investigated. The results show that the burst phenomenon occurs in the liquid filler metal under the effects of high current density, heat, and interaction force. The burst phenomenon is eliminated when the oxide film on the edge of the cross-section of the two parent metals is removed with more than or equal to 6 s ultrasonic time. A model of formation and elimination for burst was proposed, through which the blasting phenomenon can be controlled by changing the ultrasonic time and the geometrical shape of the welded joint.

Enhanced thermal- and impact-initiated reactions of PTFE/Al energetic materials through ultrasonic-assisted core-shell construction

A facile and economical approach was developed for the large-scale production of powdered core-shell structured PTFE/Al (CS-PA) energetic materials through ultrasonic-assisted mixing. The low-cost micrometer-sized PTFE and Al particles were used as starting materials. Under high-power ultrasonic waves, the PTFE powder was dispersed into nano-to sub-micrometer-sized particles and then encapsulated the Al microparticles to form the core-shell structure. The heat of combustion, burning rate, and pressurization rate of the powdered CS-PA were measured. The thermal-initiated reaction behavior was further evaluated using thermogravimetry-differential scanning calorimetry. Subsequently, the bulk CS-PA with a uniform microstructure was obtained via cold isostatic pressing of the powdered CS-PA followed by vacuum sintering. For the bulk CS-PA, the quasi-static compression behavior was characterized, and the impact-initiated reaction processes were conducted using the Split Hopkinson Pressure Bar (SHPB) and evaluated by a high-speed camera. Compared to physically mixed PTFE/Al materials, the powdered and bulk CS-PA demonstrated enhanced thermal- and impact-initiated reaction characteristics respectively, proving the effectiveness of our approach for constructing core-shell structures.

Optimization of Response Surface of Ultrasonic-assisted Extraction of Rizhao Black Tea

[ Objectivel The aim was to determine the optimal technology for ultrasonic-assisted extraction of black tea was determined. [ Methed] Taking Black Tea as materials, the Box-Behnken response surface design method of tea polyphenols ultrasonic-assisted extraction process optimi- zation was applied. The regression optimization model of the ethanol volume fraction, ultrasonic time, and ultrasonic temperature, ethyl acetate extract stalling time and tea polyphenols was established. [ Result] The influence of four factors on the black tea polyphenol solvents affecting size was as follows： ultrasonic time 〉 ethanol volume fraction 〉 stalling extraction time 〉 ultrasound temperature. The best extraction process was ultrasonic time 80 min, volume fraction of 88.99% ethanol, extraction time 89.97 min, ultrasonic temperature of 80℃. At the optimized technical parameters, the black tea phenolic extraction yield can be as high as 73.50%. [ Conclusion] The study provided theoretical basis for the development of tea leaves and black tea.

Force Modeling for Ultrasonic-assisted Wire Saw Cutting SiC Monocryatal Wafers

The advantages, such as a small cutting force, narrow kerf and little material waste make wire saw cut- ting suitable for machining precious materials like SiC, Si monocrystal and a variety of gem. As regards wire saw cutting fo wafer, however, in traditional wire saw cutting process, the cutting efficiency is low, the wear of wire saw is badly, the surface roughness of wafer is poor etc, which have a seriously impact on the cutting process stability and the use of wafers. Ultrasonic-assisted machining method is very suitable for processing a variety of non-conduc- tive hard and brittle materials, glass, ceramics, quartz, silicon, precious stones and diamonds, etc. In this paper, the force model of ultrusonic-assisted wire saw cutting of SiC monocrystal wafer, based on the kinematic and experi- mental analysis were established. The single factor and orthogonal experimental scheme for different processing pa- rameters such as wire saw speed, part rotation speed of and part feed rate, were carried out in traditional wire saw and ultrasonic-assisted wire saw cutting process. The multiple linear regression method is used to establish the static model among the cutting force, processing parameters and ultrasonic vibration parameters, and the model signifi- cance is verified. The results show, as regards ultrasonic-assisted wire saw cutting of SiC monicrystal wafer, both the tangential and normal cutting forces can reduce about 24. 5%-36% and 36. 6%-40%.

Mathematical modeling for of arctigenin from acidultrasonic-assisted extractionhydrolyzed FructusArctii

A mathematical model based on Fick's first lawwas established to describe the process of ultrasonic-assisted extraction of arctigenin from acid hydrolyzed FructusArctii.Acid hydrolization with hydrochloric acid promotes the conversion of arctiin to arctigenin in the arctiin-rich active pharmaceutical ingredient, and the hydrolyzed products were further examined to investigate the process setup. By considering the mechanism of the extraction process and experimental data, the effects of parameters including solven to solid ratio, particle size of hydrolyzed samples, ethano volume fraction, ultrasound power, extraction temperature and extraction time on concentration of arctigenin were analyzed in detail. The model was suitable for simulating the process of ultrasonic-assisted extraction of arctigenin. The simulation results of the model agree well with experimental data with the deviation below13%, indicating that the mathematical mode can provide valuable guidance for the extraction of arctigenin from acid hydrolyzed FructusArctii.

Optimization of ultrasonic-assisted enzymatic extraction of flavonoids from the fruit oiAronia melanocarpa

As a new resource food,Aronia melanocarpa is rich in flavonoids,which has a broad development prospect.In order to obtain a higher extraction rate of flavonoids,cellulase was used to extract total flavonoids from the fruits of Aronia melanocarpa by ultrasonic-assisted enzymatic extraction(UAEE).The extraction process was optimized by single factor experiment and orthogonal experiment.The optimum conditions were as follows:enzymatic hydrolysis time 2.0 h,enzymatic hydrolysis temperature 37℃,enzyme content 0.5%(by weight of fruit pulp),ethanol concentration 90%,solid-liquid ratio 1:20,enzymatic hydrolysis temperature 37℃,enzymatic hydrolysis temperature 37℃,enzyme content 0.5%(by weight of fruit pulp),ethanol concentration 90%.Ultrasonic extraction time 1,0h,temperature 45℃.Under the above conditions,the extraction yield of flavonoids reached 1.455 mg/g.Compared with ultrasonic-assisted extraction(UAE),the extraction yield was significantly improved.Therefore,ultrasonic-assisted enzymatic hydrolysis is an effective method for the extraction of total flavonoids hom Aronia melanocarpa.

Determination of Total Flavonoids in Acanthopanax senticosus(Rupr. et Maxim.) Harms by Enzymolysis and Its Technological Optimization

In order to optimize the ultrasonic extraction technique for the total flavonoid of leaf yellows plus, the contents of 21 leaf yellows plus total flavonoid from four regions in Heilongjiang Province were comparatively analyzed. The ultrasonic extraction technology was optimized by Box-Behnken response surface method, and the total flavonoid content of 21 kinds of Acanthopanax senticosus(Rupr. et Maxim.) Harms from different producing areas were analyzed by cluster analysis. The optimal process conditions were determined as ultrasonic time 30 min, solid-liquid ratio 1 : 12 and ultrasonic power 250 W, and the average yield of the total flavonoid was 1.453 mg·g^ (-1). By optimizing the ultrasonic-assisted extraction method, the total flavonoid content from different producing areas was compared in the experiment, which provided certain data support for the optimization of the extraction process in the future and laid a certain theoretical foundation for the quality analysis of Chinese medicinal materials.

Ultrasonic-assisted soldering W90 Tungsten heavy alloy to AZ31B Mg alloy using Sn-x Al alloy

A double-layered W/Mg structure is expected to be a new generation of nuclear radiation shielding material.The tungsten heavy alloy(W90)and AZ31B Mg alloy were firstly bonded by ultrasonic-assisted soldering using pure Sn and Sn-Al filler metal in an atmospheric environment.The influence of ultrasonication time on the microstructure and mechanical properties of the joint was investigated.The typical microstructure of the W90/Sn/Mg joint was W90/Mg_(2)Sn+Sn/Mg_(2)Sn layer/Mg.As the ultrasonication time increased from 2 s to 10 s,the joint width reduced and the thickness of the Mg_(2)Sn layer increased.The shear strength of the joint firstly increased,then flattened,and finally decreased.The joint strength reached the maximum value of 10.5 MPa.The fracture position of the joint changed from the W90/filler metal interface to the Mg_(2)Sn layer.The addition of Al in Sn resulted in the formation of the Al4 W phase at the W/Sn-1Al interface.The W/filler metal interface changed from the semi-coherent interface to the coherent interface and the joint strength increased.As the ultrasonication time was 6 s,the shear strength W90/Sn-1Al/Mg joint reached the maximum value of 24.6 MPa and the joint fractured at two positions:W90/filler metal interface and filler metal.With the further increase of ultrasonication time,the joint strength decreased and the joint fractured in the Mg_(2)Sn layer.

Effects of ultrasonic-assisted extraction on bioactive compounds,volatile flavors and antioxidant activities of vine tea water extracts

Background:Ampelopsis grossedentata,vine tea,which is the tea alternative beverages in China.In vine tea processing,a large amount of broken tea is produced,which has low commercial value.Methods:This study investigates the influence of different extraction methods(room temperature water extraction,boiling water extraction,ultrasonic-assisted room temperature water extraction,and ultrasonic-assisted boiling water extraction,referred to as room temperature water extraction(RE),boiling water extraction(BE),ultrasonic assistance at room temperature water extraction(URE),and ultrasonic assistance in boiling water extraction(UBE))on the yield,dihydromyricetin(DMY)content,free amino acid composition,volatile aroma components,and antioxidant properties of vine tea extracts.Results:A notable influence of extraction temperature on the yield of vine tea extracts(P<0.05),with BE yielding the highest at 43.13±0.26%,higher than that of RE(34.29±0.81%).Ultrasound-assisted extraction significantly increased the DMY content of the extracts(P<0.05),whereas DMY content in the RE extracts was 59.94±1.70%,that of URE reached 66.14±2.78%.Analysis revealed 17 amino acids,with L-serine and aspartic acid being the most abundant in the extracts,nevertheless ultrasound-assisted extraction reduced total free amino acid content.Gas chromatography-mass spectrometry analysis demonstrated an increase in the diversity and quantity of compounds in the vine tea water extracts obtained through ultrasonic-assisted extraction.Specifically,69 and 68 volatile compounds were found in URE and UBE extracts,which were higher than the number found in RE and BE extracts.In vitro,antioxidant activity assessments revealed varying antioxidant capacities among different extraction methods,with RE exhibiting the highest DPPH scavenging rate,URE leading in ABTS•+free radical scavenging,and BE demonstrating superior ferric ion reducing antioxidant activity.Conclusion:The findings suggest that extraction methods significantly influence the chemical composition and antioxidant properties of vine tea extracts.Ultrasonic-assisted extraction proved instrumental in elevating the DMY content in vine tea extracts,thereby enriching its flavor profile while maintaining its antioxidant properties.

Novel model of material removal rate on ultrasonic-assisted chemical mechanical polishing for sapphire

Ultrasonic-assisted chemical mechanical polishing(UA-CMP)can greatly improve the sapphire material removal and surface quality,but its polishing mechanism is still unclear.This paper proposed a novel model of material removal rate(MRR)to explore the mechanism of sapphire UA-CMP.It contains two modes,namely two-body wear and abrasive-impact.Furthermore,the atomic force microscopy(AFM)in-situ study,computational fluid dynamics(CFD)simulation,and polishing experiments were conducted to verify the model and reveal the polishing mechanism.In the AFM in-situ studies,the tip scratched the reaction layer on the sapphire surface.The pit with a 0.22 nm depth is the evidence of two-body wear.The CFD simulation showed that abrasives could be driven by the ultrasonic vibration to impact the sapphire surface at high frequencies.The maximum total velocity and the air volume fraction(AVF)in the central area increased from 0.26 to 0.55 m/s and 20%to 49%,respectively,with the rising amplitudes of 1–3μm.However,the maximum total velocity rose slightly from 0.33 to 0.42 m/s,and the AVF was nearly unchanged under 40–80 r/min.It indicated that the ultrasonic energy has great effects on the abrasive-impact mode.The UA-CMP experimental results exhibited that there was 63.7%improvement in MRR when the polishing velocities rose from 40 to 80 r/min.The roughness of the polished sapphire surface was R_(a)=0.07 nm.It identified that the higher speed achieved greater MRR mainly through the two-body wear mode.This study is beneficial to further understanding the UA-CMP mechanism and promoting the development of UA-CMP technology.

Structure and electrochemical performance of Cu singly doped and Cu/Al co-doped nano-nickel hydroxide

Nanometer Cu singly doped and Cu/Al co-doped nickel hydroxides were synthesized by ultrasonic-assisted precipitation method. Their crystal structure, particle size, morphology, tap density and electrochemical performance were investigated. The results show that the samples have a-phase structure with narrow particle size distribution. Cu singly doped nano-Ni（OH）2 contains irregular particles, while Cu/Al co-doped nano-Ni（OH）2 displays a quasi-spherical shape and has a relatively higher tap density. Composite electrodes were prepared by mixing 8% （mass fraction） nanometer samples with commercial micro-size spherical nickel. The charge/discharge test and cyclic voltammetry results indicate that the electrochemical performance of Cu/Al co-doped nano-Ni（OH）2 is better than that of Cu singly doped nano-Ni（OH）2, the former＇s discharge capacity reaches 330 mA.h/g at 0.2C, 12 mA.h/g and 91 mA.h/g larger than that of Cu singly doped sample and pure spherical nickel electrode, respectively. Moreover, the proton diffusion coefficient of Cu/Al co-doped sample is 52.3% larger than that of Cu singly doped sample.

Analysis of volatile components in saffron from Tibet and Henan by ultrasonic-assisted solvent extraction and GC-MS

To determine the chemical constituents of volatile components in saffron from the Tibet Autonomous Region and the Henan Province of China and to compare the chemical composition difference in the saffron,the total volatile components were extracted by ultrasonic-assisted solvent extraction（USE）,using five different solvents：diethyl ether,ethanol,ethyl acetate, dichloromethane and acetone,analyzed using gas chromatography-mass spectrometry（GC-MS）and compared to the standard MS data,and their relative contents were calculated by area normalization.The results showed both that USE was an efficient and rapid method for the extraction of the volatile components from saffron and that the components extracted from the same sample using different solvents were different.Comparison of the experimental results of saffron from the Tibet Autonomous Region and the Henan Province of China showed that their volatile components were different in their chemical composition and in their relative percentages.USE/GC-MS is a simple,rapid,and effective method for the analysis of volatile oil components in saffron.

Mechanism of aqueous fructus aurantii immaturus extracts in neuroplexus of cathartic colons

AIM: To examine the effect of aqueous fructus aurantii immaturus(FAI) extracts on the intestinal plexus of cathartic colons.METHODS: Cathartic colons were induced in rats with dahuang,a laxative used in traditional Chinese medicine. Once the model was established(after approximately 12 wk),rats were administered mosapride(1.54 mg/kg) or various doses of aqueous FAI extracts(1-4 g/kg) for 14 d. Transit function was assessed using an ink propulsion test. Rats were then sacrificed,and the ultramicrostructure of colonic tissue was examined using transmission electron microscopy. The expression of the 5-hydroxytryptamine receptor 4(5-HTR4) and neurofilament-H was assessed in colon tissues using real-time PCR,Western blot,and immunohistochemistry.RESULTS: Mosapride and high dose(4 g/kg) of aqueous FAI extracts significantly improved the bowel movement in cathartic colons compared to untreated model colons as measured by the intestinal transit rate(70.06 ± 7.25 and 72.02 ± 8.74,respectively,vs 64.12 ± 5.19; P < 0.05 for both). Compared to controls,the ultramicrostructure of cathartic colons showed signsof neural degeneration. Treatment with mosapride and aqueous FAI extracts resulted in recovery of ultrastructural pathology. Treatment with mosapride alone upregulated the gene and protein expression of 5-HTR4 compared to untreated controls(P < 0.05 for both). Treatment with aqueous FAI extracts(≥ 2 g/kg) increased 5-HTR4 m RNA levels(P < 0.05),but no change in protein level was observed by Western blot or immunohistochemistry. The m RNA and protein levels of neurofilament-H were significantly increased with mosapride and ≥ 2 g/kg aqueous FAI extracts compared to controls(P < 0.05 for all).CONCLUSION: Aqueous FAI extracts and mosapride strengthen bowel movement in cathartic colons via increasing the expression of 5-HTR4 and neurofilament-H.

Recent advances in ultrasonic-assisted machining for the fabrication of micro/nano-textured surfaces

In this paper, the state of art of ultrasonic- assisted machining technologies used for fabrication of micro/nano-textured surfaces is reviewed. Diamond machining is the most widely used method in industry for manufacturing precision parts. For fabrication of fine structures on surfaces, conventional diamond machining methods are competitive by considering the precision of structures, but have limitations at machinable structures and machining efficiency, which have been proved to be partly solved by the integration of ultrasonic vibration motion. In this paper, existing ultrasonic-assisted machin- ing methods for fabricating fine surface structures are reviewed and classified, and a rotary ultrasonic texturing （RUT） technology is mainly introduced by presenting the construction of vibration spindles, the texturing principles, and the applications of textured surfaces. Some new ideas and experimental results are presented. Finally, the challenges in using the RUT method to fabricate micro/ nano-textured surfaces are discussed with respect to texturing strategies, machinable structures, and tool wear.

Ultrasonic-assisted Synthesis of Fe Nanoparticles in the Presence of Poly（N-vinyl-2-pyrrolidone）

Zero-valent iron particles were prepared by wet reduction chemistry assisted with ultrasonic treatment. Such prepared particles have uniform size, exhibit crystalline structure and show strong pararnagnetic property. Their surface modification by coating poly（N-vinyl-2-pyrrolidone） （PVP） was investigated. The resulting Fe（0）-PVP particles were monodispersed and possessed enhancing magnetization saturation. Those synthesis conditions to control the particle size and distribution were exploited.