Effects of ultrasonic-assisted extraction on bioactive compounds,volatile flavors and antioxidant activities of vine tea water extracts

Background:Ampelopsis grossedentata,vine tea,which is the tea alternative beverages in China.In vine tea processing,a large amount of broken tea is produced,which has low commercial value.Methods:This study investigates the influence of different extraction methods(room temperature water extraction,boiling water extraction,ultrasonic-assisted room temperature water extraction,and ultrasonic-assisted boiling water extraction,referred to as room temperature water extraction(RE),boiling water extraction(BE),ultrasonic assistance at room temperature water extraction(URE),and ultrasonic assistance in boiling water extraction(UBE))on the yield,dihydromyricetin(DMY)content,free amino acid composition,volatile aroma components,and antioxidant properties of vine tea extracts.Results:A notable influence of extraction temperature on the yield of vine tea extracts(P<0.05),with BE yielding the highest at 43.13±0.26%,higher than that of RE(34.29±0.81%).Ultrasound-assisted extraction significantly increased the DMY content of the extracts(P<0.05),whereas DMY content in the RE extracts was 59.94±1.70%,that of URE reached 66.14±2.78%.Analysis revealed 17 amino acids,with L-serine and aspartic acid being the most abundant in the extracts,nevertheless ultrasound-assisted extraction reduced total free amino acid content.Gas chromatography-mass spectrometry analysis demonstrated an increase in the diversity and quantity of compounds in the vine tea water extracts obtained through ultrasonic-assisted extraction.Specifically,69 and 68 volatile compounds were found in URE and UBE extracts,which were higher than the number found in RE and BE extracts.In vitro,antioxidant activity assessments revealed varying antioxidant capacities among different extraction methods,with RE exhibiting the highest DPPH scavenging rate,URE leading in ABTS•+free radical scavenging,and BE demonstrating superior ferric ion reducing antioxidant activity.Conclusion:The findings suggest that extraction methods significantly influence the chemical composition and antioxidant properties of vine tea extracts.Ultrasonic-assisted extraction proved instrumental in elevating the DMY content in vine tea extracts,thereby enriching its flavor profile while maintaining its antioxidant properties.

Ultrasonic-Assisted Extraction of Fucoxanthin from Marine Macroalga Padina australis:Optimization,Bioactivity,and Structural Characterization

Macroalgae serve as a potential feedstock for fucoxanthin extraction.Fucoxanthin,a bioactive pigment found in the chloroplasts of marine algae,exhibits significant pharmacological properties.As a member of the carotenoid family,fucoxanthin plays a crucial role in both the food and pharmaceutical industries.This research explores the effects of ultrasonics on the extraction of fucoxanthin from the marine macroalga Padina australis.In addition,various extraction techniques and the influence of solvents on the efficient separation of fucoxanthin from algae have been studied and compared.Using methanol,chloroform,and a combination of methanol and chloroform(1:1,v/v),conventional fucoxanthin extraction from Padina australis yielded 8.12 mg of fucoxanthin per gram of biomass.However,the ultrasonic-assisted extraction resulted in a significantly higher yield of 16.9 mg of fucoxanthin per gram of biomass,demonstrating that the use of ultrasonics enhances the extraction rate compared to conventional methods.Therefore,the efficient separation of fucoxanthin from Padina australis is highly dependent on ultrasonic-assisted extraction.The process conditions for the extraction were optimized to maximize the yield of fucoxanthin from seaweeds.The following parameters were selected for optimization studies:moisture content,particle size,mixing speed,extraction temperature,extraction duration,and solid-to-solvent ratio.The extracted fucoxanthin exhibited various biological activities,including antimicrobial and antioxidant properties,and its structure was elucidated through FTIR and NMR spectroscopy.Additionally,thin-layer chromatography of the crude algae extracts confirmed the presence of fucoxanthin in the marine algae.Given these findings,the optimized extraction process holds the potential for scaling up to large-scale fucoxanthin production.Fucoxanthin,as a potent pharmacological agent,offers promising applications in the treatment of various ailments.

Optimization of Ultrasonic-Assisted Extraction Process of Polysaccharides from American Ginseng and Evaluation of Its Immunostimulating Activity

Ultrasonic-assisted extraction （UAE） of American ginseng polysaccharides （AGP） was investigated using response surface methodology. Three-factor-three-level Box-Behnken design was employed to optimize the ultrasonic power, extraction time and ratio of water to raw material to obtain a high AGP yield. The analysis of variance and response surface plots indicated that ultrasonic power was the most important factor affecting the extraction yield. The optimal conditions were ultrasonic power 400 W, extraction time 71 min, and ratio of water to raw material 33 mL g-1. Under these conditions, the yield of AGP was 8.09%, which was agreed closely to the predicted value. Gas chromatography （GC） analysis showed that AGP was composed of arabinose, rhamnose, galactose, glucose, and galacturonic acid. Fourier transform infrared spectra revealed the general characteristic absorption peaks of AGP. In addition, AGP exhibited good immunostimulating activities by up-regulating the production of nitric oxide and cytokines. Compared with hot water extraction, UAE required shorter extraction time and gave a higher extraction yield, without changing the structure and immunostimulating activity of AGP. The results indicated that UAE could be an effective and advisable technique for the large scale production of plant polysaccharides.

Optimization of Response Surface of Ultrasonic-assisted Extraction of Rizhao Black Tea

[ Objectivel The aim was to determine the optimal technology for ultrasonic-assisted extraction of black tea was determined. [ Methed] Taking Black Tea as materials, the Box-Behnken response surface design method of tea polyphenols ultrasonic-assisted extraction process optimi- zation was applied. The regression optimization model of the ethanol volume fraction, ultrasonic time, and ultrasonic temperature, ethyl acetate extract stalling time and tea polyphenols was established. [ Result] The influence of four factors on the black tea polyphenol solvents affecting size was as follows： ultrasonic time 〉 ethanol volume fraction 〉 stalling extraction time 〉 ultrasound temperature. The best extraction process was ultrasonic time 80 min, volume fraction of 88.99% ethanol, extraction time 89.97 min, ultrasonic temperature of 80℃. At the optimized technical parameters, the black tea phenolic extraction yield can be as high as 73.50%. [ Conclusion] The study provided theoretical basis for the development of tea leaves and black tea.

Mathematical modeling for of arctigenin from acidultrasonic-assisted extractionhydrolyzed FructusArctii

A mathematical model based on Fick's first lawwas established to describe the process of ultrasonic-assisted extraction of arctigenin from acid hydrolyzed FructusArctii.Acid hydrolization with hydrochloric acid promotes the conversion of arctiin to arctigenin in the arctiin-rich active pharmaceutical ingredient, and the hydrolyzed products were further examined to investigate the process setup. By considering the mechanism of the extraction process and experimental data, the effects of parameters including solven to solid ratio, particle size of hydrolyzed samples, ethano volume fraction, ultrasound power, extraction temperature and extraction time on concentration of arctigenin were analyzed in detail. The model was suitable for simulating the process of ultrasonic-assisted extraction of arctigenin. The simulation results of the model agree well with experimental data with the deviation below13%, indicating that the mathematical mode can provide valuable guidance for the extraction of arctigenin from acid hydrolyzed FructusArctii.

Antioxidant and hepatoprotective effects of Ajuga nipponensis extract by ultrasonic-assisted extraction

Objective: To investigate suitable condition for extraction of the active components from Ajuga nipponensis(A. nipponensis). Methods: Orthogonal experimental design was used to determine the optimal extraction parameters for ecdysterones and flavonoids. Finally, the hepatoprotective abilities of A. nipponensis extracts were evaluated by CCl_4-induced animal models. Results:Maximum yields of flavonoids(7.87±0.10) mg/g and ecdysterones(0.73±0.02) mg/g could be obtained when the extraction time was 50 min, the extraction temperature was 60 ℃, and the ratio of sample to 70%(v/v) ethanol was 1:20(w/w). The antioxidant property of A. nipponensis was correlated to the concentration of its extracts. At 5 mg/m L, A. nipponensisextract scavenged 84.8% of DPPH radical and had absorbance values of 2.43±0.04 reducing power. Upon CCl_4-induced liver injury, glutamic oxaloacetic transaminase and glutamic pyruvic transaminase decreased significantly after the mice were treated with A. nipponensis. Histological researches also explained that A. nipponensis reduced the extent of liver lesions induced by CCl_4. Conclusions: A. nipponensis exhibited potent antioxidant activity in chemical experimental models and hepatoprotective effect against CCl_4-induced liver damage.

An experimental study exploring the influencing factors for ultrasonic-assisted extraction of flavonoid compounds from leaves of Amorpha fruticosa L.

In this paper,the ultrasonic-assisted extraction process of flavonoid compounds from leaves of Amorpha fruticosa is optimized.In single factor experiments,solid/liquid ratios,ultrasonic power,ethanol concentrations and extraction cycles were experimental factors.Box–Behnken central composite design and RSM analyzed the effects of the four factors on the yield of total flavonoids.The optimal extraction parameters were solid/liquid ratio 1:50 g/mL,ultrasonic power 316 W,ethanol concentration 50%,4 extraction cycles.In the optimized condition,the estimated value of the regression model was 66.6456 mg/g while the measured value was 66.4329 mg/g.

Evaluating the performances of accelerated-solvent extraction, microwave-assisted extraction, and ultrasonic-assisted extraction for determining PCBs, HCHs and DDTs in sediments

Three extraction techniques have been recently used for the quantitative extraction of semi-volatile organic pollutants in sediments, i.e. accelerated solvent extraction （ASE）, microwave assisted extraction （MAE） and ultrasonic assisted extraction （UAE）. However, their extraction efficiencies have rarely been quantitatively compared using rigorous mathematical methods. In this paper, one-way analysis of variance （ANOVA） was employed to evaluate the performance of ASE, MAE and UAE in the overall extraction of PCBs, DDTs and HCHs by analysis of their recoveries from the Standard Reference Material IAEA-417, a sediment sample certified by many international laboratories. Conclusions were drawn at a significance level of P〈 0.05. No significant differences were found among the mean values for method recoveries using ASE, MAE and UAE. The mean values for real recoveries using ASE and MAE were nearly identical, but the real recovery using UAE was much lower. The concentrations of all PCBs, DDTs and HCHs except for CB52 and o,p＇-DDT using UAE were the lowest. Comparing the results obtained using ASE with MAE, the concentrations of CB28, CB52, CB138, ct-HCH, [3-HCH, p,p＇-DDE and p,p＇-DDD were nearly identical, while the concentrations of other compounds were significantly different. Based on the low recoveries, it was concluded that UAE is a relatively inefficient extraction method, while ASE and MAE are equivalent methods. Taking into consideration the relative standard deviation （RSD） values, solvent volume, extraction time, and purchasing costs of the apparatus, MAE was considered superior to ASE for extraction of PCBs, DDTs and HCHs.

Optimization of the Ultrasonic-assisted Extraction Process for Total Flavonoids in Primula sikkimensis Hook.by Response Surface Methodology

[Objectives]To optimize the ultrasonic-assisted extraction process for total flavonoids in Primula sikkimensis Hook.[Methods]The effects of ethanol volume fraction,extraction time,extraction temperature,ultrasonic time and solid-to-liquid ratio on the yield of total flavonoids were investigated by single factor method,and the extraction process for total flavonoids in P.sikkimensis was optimized by Box-Behnken experimental design.[Results]The optimal extraction process for total flavonoids in P.sikkimensis was ethanol volume fraction 45%,extraction time 29 min,extraction temperature 80℃,solid-to-liquid 1∶40(g/mL)and ultrasonic time 10 min.Under such conditions,the average yield of total flavonoids in P.sikkimensis was 3.09%.[Conclusions]The optimized extraction process is simple and feasible,and is expected to provide a reference for the extraction of total flavonoids in P.sikkimensis.

Optimization of Ultrasonic-assisted Extraction of Polysaccharide from Hibiscus syriacus L.

The ultrasonic-assisted extraction of polysaccharides from Hibiscus syriacus L. at 180 W low power was optimized by the single factor tests and orthogonal test. Extraction temperature,ultrasonic treatment time,extraction times,and material-to-liquid ratio were considered as independent variables. The results suggested that the best extraction condition were determined as the extraction temperature at 80 ℃,the ultrasonic treatment time of 40 min,the material-to-liquid ratio at1∶ 20（ g/ml）,and the extraction times of 3. Under the optimal conditions,the extraction rate of polysaccharides from Hibiscus syriacus was 3. 114%.

Preventing formation of intermetallic compounds in ultrasonic-assisted Sn soldering of Mg/Al alloys through pre-plating a Ni coating layer on the Mg substrate

Magnesium and aluminum alloys are widely used in various industries because of their excellent properties,and their reliable connection may increase application of materials.Intermetallic compounds(IMCs)affect the joint performance of Mg/Al.In this study,AZ31 Mg alloy with/without a nickel(Ni)coating layer and 6061 Al alloy were joined by ultrasonic-assisted soldering with Sn-3.0Ag-0.5Cu(SAC)filler.The effects of the Ni coating layer on the microstructure and mechanical properties of Mg/Al joints were systematically investigated.The Ni coating layer had a significant effect on formation of the Mg_(2)Sn IMC and the mechanical properties of Mg/Al joints.The blocky Mg_(2)Sn IMC formed in the Mg/SAC/Al joints without a Ni coating layer.The content of the Mg_(2)Sn IMC increased with increasing soldering temperature,but the joint strength decreased.The joint without a Ni coating layer fractured at the blocky Mg_(2)Sn IMC in the solder,and the maximum shear strength was 32.2 MPa.By pre-plating Ni on the Mg substrate,formation of the blocky Mg_(2)Sn IMC was inhibited in the soldering temperature range 240–280℃and the joint strength increased.However,when the soldering temperature increased to 310℃,the blocky Mg_(2)Sn IMC precipitated again in the solder.Transmission electron microscopy showed that some nano-sized Mg_(2)Sn IMC and the(Cu,Ni)_(6)Sn_(5)phase formed in the Mg(Ni)/SAC/Al joint soldered at 280℃,indicating that the Ni coating layer could no longer prevent diffusion of Mg into the solder when the soldering temperature was higher than 280℃.The maximum shear strength of the Mg(Ni)/SAC/Al joint was 58.2 MPa for a soldering temperature of 280℃,which was 80.7%higher than that of the Mg/SAC/Al joint,and the joint was broken at the Mg(Ni)/SAC interface.Pre-plating Ni is a feasible way to inhibit formation of IMCs when joining dissimilar metals.

Adenosine cyclic phosphate with ultrasonic-assisted pectinase extraction alleviated allergic reactions in RBL-2H3 through inhibiting the influx of intracellular Ca^(2+)

Jujube contains abundant cyclic adenosine monophosphate(cAMP)and the ultrasonic-assisted pectinase extraction(UAPE)conditions for obtaining the maximum cAMP yield from jujube were optimized.Orthogonal array design was applied to evaluate the effects of 4 variables by UAPE on cAMP yield.The results showed that the optimal cAMP yield(783.0μg/g)was derived at ratio of liquid to solid 5 mL/g,ratio of pectinase to raw material 1.5%,time 60 min and temperature 40℃.Moreover,the effect of cAMP on the anti-allergic function of action induced by immunoglobulin E(IgE)and its meschanism was investigated through establishing the sensitized cell model in rat basophilic leukemia(RBL-2 H3)cells using dinitrophenylated(DNP)-bovine serum albumin(BSA)-IgE.The results showed that cAMP interfered with sensitized cells,effectively inhibited the occurrence of basophil degranulation in dose dependence,and significantly reduced the activity ofβ-hexosamindase(β-hex),at the optimal concentration of 50μg/mL.The level of anti-inflammatory factor interleukin-10(IL-10)was promoted and the content of pro-inflammatory factor tumor necrosis factor-α(TNF-α)was suppressed by cAMP.In addition,influx of intracellular Ca^(2+) was repressed effectively.Our results demonstrate that jujube cAMP regulated the cytokine balance in the allergy pathway through blocking the influx of extracellular Ca^(2+),with the prevention of allergy symptoms.

Determination of Lignans in Schisandra sphenanthera and Schisandra chinensis Using Ionic Liquid-based Ultrasonic-assisted Extraction and High-performance Liquid Chromatography

A green, rapid and precise sample pretreatment technique, IL-based UAE（ionic liquid-based ultrasonic- assisted extraction）, was coupled with high-performance liquid chromatographic separation to identify the main effective components in Schisandra sphenanthera（S, sphenanthera） and Schisandra chinensis（S, ehinensis） including schisantherin A, schisandrin A, and deoxyschizandrin. Four different types of ionic liquids have been investigated, finally [C6MIM][BF4] was used as the extraction solvent. A powder form of S. sphenanthera and S. chinensis was mixed with the [C6MIM][BF4] to produce a suspension. This suspension was ultrasonically extracted in a water bath at room temperature. Several of the process parameters were optimized, including the type of ionic liquid used and its volume, the sample amount, the size of the sample particle, the extraction time, etc. HPLC calibration curves were estab-lished for all the analytes and proved to be linear（r〉0.9999）. The lowest detection level for schisandrin A was 0.12μg/mL, for schisantherin A was 0.08 μg/mL, and for deoxyschizandfin was 0.10μg/mL. The recoveries of the target compounds were from 74.19% to 109.33%. The standard deviations for detection were generally no more than 6.31%. In contrast to conventional extraction methods, the IL-based UAE did not involve volatile organic volatile solvents, and the analysis time, required sample and solvent vohtrnes were also lower than those of the conventional techniques.

Ginkgo biloba extract alleviates fatty liver hemorrhagic syndrome in laying hens via reshaping gut microbiota

Background Ginkgo biloba extract(GBE)is evidenced to be effective in the prevention and alleviation of metabolic disorders,including obesity,diabetes and fatty liver disease.However,the role of GBE in alleviating fatty liver hemorrhagic syndrome(FLHS)in laying hens and the underlying mechanisms remain to be elucidated.Here,we investigated the effects of GBE on relieving FLHS with an emphasis on the modulatory role of GBE in chicken gut microbiota.Results The results showed that GBE treatment ameliorated biochemical blood indicators in high-fat diet(HFD)-induced FLHS laying hen model by decreasing the levels of TG,TC,ALT and ALP.The lipid accumulation and pathological score of liver were also relieved after GBE treatment.Moreover,GBE treatment enhanced the antioxidant activity of liver and serum by increasing GSH,SOD,T-AOC,GSH-PX and reducing MDA,and downregulated the expression of genes related to lipid synthesis(FAS,LXRα,GPAT1,PPARγand Ch REBP1)and inflammatory cytokines(TNF-α,IL-6,TLR4 and NF-κB)in the liver.Microbial profiling analysis revealed that GBE treatment reshaped the HFD-perturbed gut microbiota,particularly elevated the abundance of Megasphaera in the cecum.Meanwhile,targeted metabolomic analysis of SCFAs revealed that GBE treatment significantly promoted the production of total SCFAs,acetate and propionate,which were positively correlated with the GBE-enriched gut microbiota.Finally,we confirmed that the GBE-altered gut microbiota was sufficient to alleviate FLHS by fecal microbiota transplantation(FMT).Conclusions We provided evidence that GBE alleviated FLHS in HFD-induced laying hens through reshaping the composition of gut microbiota.Our findings shed light on mechanism underlying the anti-FLHS efficacy of GBE and lay foundations for future use of GBE as additive to prevent and control FLHS in laying hen industry.

Evaluation of the intracellular lipid-lowering effect of polyphenols extract from highland barley in HepG2 cells

Active ingredients from highland barley have received considerable attention as natural products for developing treatments and dietary supplements against obesity.In practical application,the research of food combinations is more significant than a specific food component.This study investigated the lipid-lowering effect of highland barley polyphenols via lipase assay in vitro and HepG2 cells induced by oleic acid(OA).Five indexes,triglyceride(TG),total cholesterol(T-CHO),low density lipoprotein-cholesterol(LDL-C),aspartate aminotransferase(AST),and alanine aminotransferase(ALT),were used to evaluate the lipidlowering effect of highland barley extract.We also preliminary studied the lipid-lowering mechanism by Realtime fluorescent quantitative polymerase chain reaction(q PCR).The results indicated that highland barley extract contains many components with lipid-lowering effects,such as hyperoside and scoparone.In vitro,the lipase assay showed an 18.4%lipase inhibition rate when the additive contents of highland barley extract were 100μg/m L.The intracellular lipid-lowering effect of highland barley extract was examined using 0.25 mmol/L OA-induced HepG2 cells.The results showed that intracellular TG,LDL-C,and T-CHO content decreased by 34.4%,51.2%,and 18.4%,respectively.ALT and AST decreased by 51.6%and 20.7%compared with the untreated hyperlipidemic HepG2 cells.q PCR results showed that highland barley polyphenols could up-regulation the expression of lipid metabolism-related genes such as PPARγand Fabp4.

A Review on Sources,Extractions and Analysis Methods of a Sustainable Biomaterial:Tannins

Condensed and hydrolysable tannins are non-toxic natural polyphenols that are a commercial commodity industrialized for tanning hides to obtain leather and for a growing number of other industrial applications mainly to substitute petroleum-based products.They are a definite class of sustainable materials of the forestry industry.They have been in operation for hundreds of years to manufacture leather and now for a growing number of applications in a variety of other industries,such as wood adhesives,metal coating,pharmaceutical/medical applications and several others.This review presents the main sources,either already or potentially commercial of this forestry by-materials,their industrial and laboratory extraction systems,their systems of analysis with their advantages and drawbacks,be these methods so simple to even appear primitive but nonetheless of proven effectiveness,or very modern and instrumental.It constitutes a basic but essential summary of what is necessary to know of these sustainable materials.In doing so,the review highlights some of the main challenges that remain to be addressed to deliver the quality and economics of tannin supply necessary to fulfill the industrial production requirements for some materials-based uses.

Rapid determination of volatile constituents in safflower from Xinjiang and Henan by ultrasonic-assisted solvent extraction and GC-MS

The total volatile components were extracted from safflower by ultrasonic-assisted solvent extraction （USE） and their chemical constituents were analyzed by gas chromatographymass spectrometry （GC-MS） to provide scientific basis for the quality control of safflower. Five different solvents （diethyl ether, ethanol, ethyl acetate, dichloromethane and acetone） were used and compared in terms of number of volatile components extracted and the peak areas of these components in TIC. The results showed that USE could be used as an efficient and rapid method for extracting the volatile components from safflower. It also could be found that the number of components in the TIC of ethyl acetate extract was more than that in the TIC of other solvent ones. Meanwhile, the volatile components of safflower from Xinjiang Autonomous Region and Henan Province of China were different in chemical components and relative contents. It could be concluded that both the extraction solvents and geographical origin of safflower are responsible for these differences. The experimental results also indicated that USE/GC-MS is a simple, rapid and effective method to analyze the volatile oil components of safflower.

Automatic Extraction Method of 3D Feature Guidelines for Complex Cultural Relic Surfaces Based on Point Cloud

Cultural relics line graphic serves as a crucial form of traditional artifact information documentation,which is a simple and intuitive product with low cost of displaying compared with 3D models.Dimensionality reduction is undoubtedly necessary for line drawings.However,most existing methods for artifact drawing rely on the principles of orthographic projection that always cannot avoid angle occlusion and data overlapping while the surface of cultural relics is complex.Therefore,conformal mapping was introduced as a dimensionality reduction way to compensate for the limitation of orthographic projection.Based on the given criteria for assessing surface complexity,this paper proposed a three-dimensional feature guideline extraction method for complex cultural relic surfaces.A 2D and 3D combined factor that measured the importance of points on describing surface features,vertex weight,was designed.Then the selection threshold for feature guideline extraction was determined based on the differences between vertex weight and shape index distributions.The feasibility and stability were verified through experiments conducted on real cultural relic surface data.Results demonstrated the ability of the method to address the challenges associated with the automatic generation of line drawings for complex surfaces.The extraction method and the obtained results will be useful for line graphic drawing,displaying and propaganda of cultural relics.

Preferentially selective extraction of lithium from spent LiCoO_(2)cathodes by medium-temperature carbon reduction roasting

Lithium recovery from spent lithium-ion batteries(LIBs)have attracted extensive attention due to the skyrocketing price of lithium.The medium-temperature carbon reduction roasting was proposed to preferential selective extraction of lithium from spent Li-CoO_(2)(LCO)cathodes to overcome the incomplete recovery and loss of lithium during the recycling process.The LCO layered structure was destroyed and lithium was completely converted into water-soluble Li2CO_(3)under a suitable temperature to control the reduced state of the cobalt oxide.The Co metal agglomerates generated during medium-temperature carbon reduction roasting were broken by wet grinding and ultrasonic crushing to release the entrained lithium.The results showed that 99.10%of the whole lithium could be recovered as Li2CO_(3)with a purity of 99.55%.This work provided a new perspective on the preferentially selective extraction of lithium from spent lithium batteries.

Effects of conductive agent type on lithium extraction from salt lake brine with LiFePO_(4) electrodes

Electrochemical lithium extraction from salt lakes is an effective strategy for obtaining lithium at a low cost.Nevertheless,the elevated Mg:Li ratio and the presence of numerous coexisting ions in salt lake brines give rise to challenges,such as prolonged lithium extraction periods,diminished lithium extraction efficiency,and considerable environmental pollution.In this work,Li FePO4(LFP)served as the electrode material for electrochemical lithium extraction.The conductive network in the LFP electrode was optimized by adjusting the type of conductive agent.This approach resulted in high lithium extraction efficiency and extended cycle life.When the single conductive agent of acetylene black(AB)or multiwalled carbon nanotubes(MWCNTs)was replaced with the mixed conductive agent of AB/MWCNTs,the average diffusion coefficient of Li+in the electrode increased from 2.35×10^(-9)or 1.77×10^(-9)to 4.21×10^(-9)cm^(2)·s^(-1).At the current density of 20 mA·g^(-1),the average lithium extraction capacity per gram of LFP electrode increased from 30.36 mg with the single conductive agent(AB)to 35.62 mg with the mixed conductive agent(AB/MWCNTs).When the mixed conductive agent was used,the capacity retention of the electrode after 30 cycles reached 82.9%,which was considerably higher than the capacity retention of 65.8%obtained when the single AB was utilized.Meanwhile,the electrode with mixed conductive agent of AB/MWCNTs provided good cycling performance.When the conductive agent content decreased or the loading capacity increased,the electrode containing the mixed conductive agent continued to show excellent electrochemical performance.Furthermore,a self-designed,highly efficient,continuous lithium extraction device was constructed.The electrode utilizing the AB/MWCNT mixed conductive agent maintained excellent adsorption capacity and cycling performance in this device.This work provides a new perspective for the electrochemical extraction of lithium using LFP electrodes.