Electrodeposition of chitosan/graphene oxide conduit to enhance peripheral nerve regeneration

Currently available commercial nerve guidance conduits have been applied in the repair of peripheral nerve defects.However,a conduit exhibiting good biocompatibility remains to be developed.In this work,a series of chitosan/graphene oxide(GO)films with concentrations of GO varying from 0-1 wt%(collectively referred to as CHGF-n)were prepared by an electrodeposition technique.The effects of CHGF-n on proliferation and adhesion abilities of Schwann cells were evaluated.The results showed that Schwann cells exhibited elongated spindle shapes and upregulated expression of nerve regeneration-related factors such as Krox20(a key myelination factor),Zeb2(essential for Schwann cell differentiation,myelination,and nerve repair),and transforming growth factorβ(a cytokine with regenerative functions).In addition,a nerve guidance conduit with a GO content of 0.25%(CHGFC-0.25)was implanted to repair a 10-mm sciatic nerve defect in rats.The results indicated improvements in sciatic functional index,electrophysiology,and sciatic nerve and gastrocnemius muscle histology compared with the CHGFC-0 group,and similar outcomes to the autograft group.In conclusion,we provide a candidate method for the repair of peripheral nerve defects using free-standing chitosan/GO nerve conduits produced by electrodeposition.

Effect of Electrodeposition Methods of Cuprous Oxide on Antibacterial Properties of Concrete

Three types of electrodeposition,DC electrodeposition,low-frequency pulsed electrodeposition and high-frequency pulsed electrodeposition,were used to deposit cuprous oxide on the concrete surface to improve the antibacterial properties of concrete.The effects of pulse deposition frequency on the antibacterial property of concrete were studied using sulfate-reducing bacteria(SRB)and Escherichia coli(E.coli)as model bacteria.The bacterial concentration and the antibacterial rate were measured to evaluate the antibacterial performance of concrete.The effects of different deposition methods on the elemental content of copper and the amount of copper ions exuded were studied.XRD and SEM were used to analyze the microstructure of the deposited layers.The experimental results show that the concrete treated by electrodeposition exhibited good antibacterial properties against SRB and E.coli.The antibacterial effect of cuprous oxide deposited on concrete by pulse method was better than that by direct current(DC)method.The antibacterial rate of concrete was positively correlated with the exudation rate of copper ion.As the pulse frequency increased,the deposits content on the surface was increased with an accompanying improvement in the antibacterial property.Besides,the pulsed current had an indiscernible effect on the composition of the sediments,which were all mainly composed of Cu_(2)O,but the morphology of the Cu_(2)O differed greatly.Cubic octahedral cuprous oxide had better antibacterial properties with the highest copper ion leaching rate compared with cubic and spherical cuprous oxide.

Inverse-opal structured TiO_(2) regulating electrodeposition behavior to enable stable lithium metal electrodes

Lithium metal anode is almost the ultimate choice for high-energy density rechargeable batteries, but its uneven electrochemical dissolution-deposition characteristics lead to poor cycle stability and lithium dendrites safety problems. The fundamental solution to the problems is to interfere electrodeposition process of lithium metal so that it can be carried out reversibly and stably. In this work, an inverse-opal structured TiO2membrane with a thickness of only ~1 μm is designed to regulate the electrodeposition behavior of lithium metal, in which the ordered channels homogenize mass transfer process, the anatase TiO_(2)walls of the ion channels reduce desolvation barrier of solvated lithium-ions, and the spherical cavities with a diameter of ~300 nm confine migration of the adsorbed lithium atoms during electrocrystallization to diminish overpotential of lithium. These systematic effects cover and essentially change the whole process of electrodeposition of lithium metal and eliminate the possibility of lithium dendrite formation. The as-obtained lithium metal electrode delivers a Coulombic efficiency of 99.86% in the 100th cycle, and maintains a low deposition overpotential of 0.01 V for 800 h.

Three-dimensional structural Cu^(6)Sn_(5)/carbon nanotubes alloy thin-film electrodes fabricated by in situ electrodeposition from the leaching solution of waste-printed circuit boards

Tin-based materials are very attractive anodes because of their high theoretical capacity,but their rapid capacity fading from volume expansions limits their practical applications during alloying and dealloying processes.Herein,the improved binder-free tin-copper intermetallic/carbon nanotubes(Cu6Sn5/CNTs)alloy thin-film electrodes are directly fabricated through efficient in situ electrodeposition from the leaching solution of treated waste-printed circuit boards(WPCBs).The characterization results show that the easily agglomerated Cu6Sn5 alloy nanoparticles are uniformly dispersed across the three-dimensional network when the CNTs concentration in the electrodeposition solution is maintained at 0.2 g·L−1.Moreover,the optimal Cu6Sn5/CNTs-0.2 alloy thin-film electrode can not only provide a decent discharge specific capacity of 458.35 mAh·g^(−1)after 50 cycles at 100 mA·g^(−1)within capacity retention of 82.58%but also deliver a relatively high reversible specific capacity of 518.24,445.52,418.18,345.33,and 278.05 mAh·g^(−1)at step-increased current density of 0.1,0.2,0.5,1.0,and 2.0 A·g^(−1),respectively.Therefore,the preparation process of the Cu6Sn5/CNTs-0.2 alloy thin-film electrode with improved electrochemical performance may provide a cost-effective strategy for the resource utilization of WPCBs to fabricate anode materials for lithium-ion batteries.

Direct electrodeposition of ionic liquid-based template-free Sn Co alloy nanowires as an anode for Li-ion batteries

Sn Co alloy nanowires were successfully electrodeposited from Sn Cl2-Co Cl2-1-ethyl-3-methylimidazolium chloride(EMIC) ionic liquid without a template. The nanowires were obtained from the molar ratio of 5:40:60 for Sn Cl2(25)Co Cl2(25)EMIC at-0.55 V and showed a minimum diameter of about 50 nm and lengths of over 20 μm. The as-fabricated SnCo nanowires were about 70 nm in diameter and featured a Sn/Co weight ratio of 3.85:1, when used as an anode for a Li-ion battery, they presented respective specific capacities of 687 and 678 m Ah·g^(-1) after the first charge and discharge cycle and maintained capacities of about 654 m Ah·g^(-1) after 60 cycles and 539 m Ah·g^(-1) after 80 cycles at a current density of 300 m A·g^(-1). Both the nanowire structure and presence of elemental Co helped buffer large volume changes in the Sn anode during charging and discharging to a certain extent, thereby improving the cycling performance of the Sn anode.

Electrodeposition of aluminium and aluminium-copper alloys from a room temperature ionic liquid electrolyte containing aluminium chloride and triethylamine hydrochloride

The electrodeposition of A1 and A1-Cu binary alloys on to gold substrates from a room temperature ionic liquid electrolyte containing A1C13-EtaNHC1 was studied. The electrochemical behavior of the electrolyte and the mechanism of deposition were investigated through cyclic voltammetry （CV）, and the properties of deposits obtained were assessed by scanning electron microscopy with energy dispersive X-ray spectroscopy （SEM-EDS） and X-ray diffraction （XRD）. A1 of 70μm in thickness and an A1-Cu alloy of 30μm in thickness with 8at% copper were deposited from the electrolyte. SEM images of the deposits indicate that the A1 deposit was smooth and uniform, whereas the Al-Cu deposit was nodular. The average crystalline size, as determined by XRD patterns, was found to be （30±5） and （29±5） nm, respectively, for A1 and A1-Cu alloys. Potentiodynamic polarization （Tafel plots） and electrochemical impedance spectroscopic （EIS） measurements showed that Al-Cu alloys are more corrosion resistant than Al.

Electrochemical behaviors of Zn-Fe alloy and Zn-Fe-TiO_2 composite electrodeposition

Electrochemical behaviors of Zn-Fe alloy and Zn-Fe-TiO2 composite electrodeposition in alkaline zincatesolutions were studied respectively by the methods of linear potential sweep and cyclic voltammetry. From the re-sults it can be concluded that Zn shows under potential deposition, Zn-Fe alloy codeposition is anomalous codeposi-tion and Zn-Fe alloy cathode polarization is increased with the introduction of additive. From the view point of elec-trochemistry, the reasons that the content of Fe in the Zn-Fe coating changes with the composition of the electrolyteand the process conditions altering and the relationship between the content of Fe and the appearance of the coatingare interpreted. The cathode polarization of Zn-Fe alloy codeposition is enhanced obviously with addition of additive.In the course of composite electrodeposition, TiO2 has less promotion to electrodeposition of zinc ions than to iron i-ons, while the electrodeposition of iron ions improves the content of TiO2 in composite coating, which is inagreement with the results of process experiments.

Electrodeposition of Rare Earth Metals and Their Alloys in Organic Electrolytes

The electrodeposition of rare earth metals and their alloys in organic electrolytes are reviewed. The solvents, electrolytes and operetating conditions are discussed. It is concluded that exploring the rare earth salt, which can be highly soluble in organic solvents and easily dehydrated, is the key to the pracitical utilization of electrodeposition of rare earth metals and their alloys in organic electrolytes.

Continuous electrodeposition of silicon and germanium micro/nanowires from their oxides precursors in molten salt

In recent years,silicon(Si)and germanium(Ge)materials have been considered as promising highperformance anode materials for lithium-ion batteries due to their high theoretical capacities.It is of great importance to design and synthesize micro/nanostructured Si and Ge materials.In this work,we demonstrated that Si,Ge and SiGe micro/nanowires can be continuously synthesized from their oxides precursors through molten salt electrodeposition.The electrochemical synthesis processes have been investigated systematically,and the deposited Si,Ge and SiGe micro/nanowires have been characterized and compared.The results show that the micro/nanostructured Si and Ge materials with tunable morphology can be facilely and continuously produced via molten salt electrodeposition.The electrodeposition process generally includes calcium oxide-assisted dissolution and electrodeposition processes,and the morphologies of the deposited Si and Ge products can be controlled by varying conditions.Si micro/nanowires,Si films,Ge micro/nanowires,and Ge particles can be continuously synthesized in a controlled manner.

Ni nanocomposite films formed by Ni nanowires embedded in Ni matrix using electrodeposition

Ni nanocomposite films formed by Ni nanowires embedded in Ni matrix(Ni nanowire/Ni composite films)were fabricated by electrodeposition combined with supersonic stirring in a conventional Watts'bath containing Ni nanowires with diameter about 30 nm.The deposition temperature-dependent microstructure,crystal orientation,lattice constant and corrosion behavior of the Ni nanowire/Ni composite films were investigated by field emission scanning electron microscope,X-ray diffraction and potentiodynamic polarization tests,respectively.And the possible mechanism was discussed.It is found that to some extent,the deposition temperature has an impact on the microstructure,crystal orientation,lattice constant and corrosion property of the Ni nanowire/Ni composite films.The Ni nanowire/Ni composite films prepared at 50℃exhibit a novel inter-twisted-nanowire microstructure and have the best corrosion resistance.

Hydrogen peroxide biosensor based on electrodeposition of zinc oxide nanoflowers onto carbon nanotubes film electrode

A new amperometric biosensor for hydrogen peroxide was developed based on adsorption of horseradish peroxidase at the glassy carbon electrode modified with zinc oxide nanoflowers produced by electrodeposition onto multi-walled carbon nanotubes （MWNTs） film. The morphology of the MWNTs/nano-ZnO electrode has been investigated by scanning electron microscopy （SEM）, and the electrochemical performance of the electrode has also been studied by amperometric method. The resulting electrode offered an excellent detection for hydrogen peroxide at -0.11 V with a linear response range of 9.9×10^-7 to 2.9×10^-3 mol/L with a correlation coefficient of 0.991, and response time 〈5 s. The biosensor displays rapid response and expanded linear response range, and excellent stability.

Electrodeposition and Characterization of Polyaniline Film

Abstract Polyaniline film was prepared by electrochemical method in an acidic solution of aniline. The micromor- phology of the polyaniline film was transformed to three-dimensional network structure instead of little particles while the deposition time was extended. The peak wavelength of the photoluminescence spectrum was 491 nm. The luminous intensity increased with the extension of deposition time, and so did the electrochemical activity.

Supercapacitor characteristic of La-doped Ni(OH)_2 prepared by electrodeposition

Samples of lanthanum-doped nickel hydroxide were prepared by electrodeposition method. The structure and electrochemical properties of the samples were studied by X-ray diffraction and a home-made open three-electrode cell system,respectively. The results show that the deposition process of Ni(OH)2 and La(OH)3 is mainly controlled by electrochemical polarization,which makes it easy to form uniform fine crystals. In addition,La(OH)3 is not a separate phase and lanthanum ions are doped into Ni(OH)2 crystal la...

Preparation of Gd Co alloy in dimethylsulfoxide by electrodeposition method

Electrodeposition of Gd Co alloy film from dimethylsulfoxide (DMSO) electrolyte solutions has been investigated using cyclic voltammogram and potentiostatic technique. Potentiostatic depositions between -1.20 V and -2.70 V were applied to uncomplexed and complexed solution. The deposits obtained at potentials within -2.30～-2.70 V from complexed solutions are silver gray smooth films.

Characterization and optimization of pulse electrodeposition of Ni/nano-Al_2O_3 composite coatings

Nickel/nano-A1203 composite coatings produced by the pulse electrodeposition method and the influence of pulse parameters, i.e., pulse frequency, duty cycle, and current density on the microstructure, hardness, and corrosion resistance, were critically investigated on an AISI 1018 mild steel specimen electroplated in a Watt＇s type bath. The experiments were carried out with different combinations of pulse parameters using Taguchi＇s L27 orthogonal array, and 27 trials were conducted to study the effect of pulse parameters in view to maximize the hardness of the specimen. The assessment results clearly reveal that the specimen exhibits the maximum hardness at the pulse frequency of 20 Hz, duty cycle of 30%, and peak current density of 0.4 A/cm2, which are designated as the optimal parameters herein. Furthermore, the influences of those optimized pulse parameters over the microstructure and corrosion resistance were investigated, and some conclusions were drawn. Also, from the ANOVA examination, it is clear that duty cycle is predominant in affecting the hardness, while current density has relatively low impact.

Healing Effectiveness of Cracks Rehabilitation in Reinforced Concrete Using Electrodeposition Method

An electrodeposition method and its experimental device for rehabilitation of cracks in reinforced concrete were proposed. Porous concrete is proposed to simulate cracked concrete, and mass increment, permeation coefficient and sound velocity of ultrasonic wave were used to be evaluating indicators of healing effectiveness of crack rehabilitation in this method. Effect of currency density, concentration of electrolyte solution on healing effectiveness of porous reinforced concretes with different total void ratio was studied. The experimental results indicate that the simulation of porous concrete for cracks can reflect the healing effectiveness of electrodeposition method effectively, Total void ratio of porous concrete has little effect on healing effectiveness of electrodeposition at early ages. The higher the currency density or concentration of electrolyte solution is, the higher the electrodeposition rate and sound velocity in porous concrete are, and the lower the permeation coefficient of porous concrete will be. Mg（OH）2 crystals produced in high current density are large, thin sheet-shaped and arranged loosely.

ELECTRODEPOSITION OF AMORPHOUS Ni-P ALLOY COATINGS

ＥＬＥＣＴＲＯＤＥＰＯＳＩＴＩＯＮＯＦＡＭＯＲＰＨＯＵＳＮｉＰＡＬＬＯＹＣＯＡＴＩＮＧＳ①ＦａｎｇＺｈａｏｈｅｎｇＩｎｓｔｉｔｕｔｅｏｆＣｈｅｍｉｃａｌＭｅｔａｌｕｒｇｙ，ＣｈｉｎｅｓｅＡｃａｄｅｍｙｏｆＳｃｉｅｎｃｅｓ，Ｂｅｉｊｉｎｇ１０００８０...

Prompt Electrodeposition of Ni Nanodots on Ni Foam to Construct a High-Performance Water-Splitting Electrode:Efficient, Scalable,and Recyclable

In past decades,Ni-based catalytic materials and electrodes have been intensively explored as low-cost hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)catalysts for water splitting.With increasing demands for Ni worldwide,simplifying the fabrication process,increasing Ni recycling,and reducing waste are tangible sustainability goals.Here,binder-free,heteroatom-free,and recyclable Ni-based bifunctional catalytic electrodes were fabricated via a one-step quick electrodeposition method.Typically,active Ni nanodot(NiND)clusters are electrodeposited on Ni foam(NF)in Ni(NO3)2 acetonitrile solution.After drying in air,NiO/NiND composites are obtained,leading to a binder-free and heteroatom-free NiO/NiNDs@NF catalytic electrode.The electrode shows high efficiency and long-term stability for catalyzing hydrogen and oxygen evolution reactions at low overpotentials(10ηHER= 119 mV and 50ηOER=360 mV)and can promote water catalysis at 1.70 V@ 10mA cm-2.More importantly,the recovery of raw materials(NF and Ni(NO3)2)is quite easy because of the solubility of NiO/NiNDs composites in acid solution for recycling the electrodes.Additionally,a large-sized(S^70 cm2)NiO/NiNDs@NF catalytic electrode with high durability has also been constructed.This method provides a simple and fast technology to construct high-performance,low-cost,and environmentally friendly Ni-based bifunctional electrocatalytic electrodes for water splitting.

Effects of Br^- and I^- concentrations on Zn electrodeposition from ammoniacal electrolytes

The effects of Br- and I- concentrations on the cell voltage, anodic polarization, current efficiency （CE）, and energy consumption （EC） of zinc electrodeposition from ammoniacal ammonium chloride solutions were investigated. The surface morphology of zinc deposits was also examined. Scanning electron microscopy （SEM） and X-ray diffraction （XRD） were used to characterize the morphology of zinc deposits and the phase of anodic sediments produced during electrolysis. The results clearly showed that the CE slightly increased from approximately 95.12% in the absence of F and Br- to 97.08% in the presence of 10 g·L-1 Br; in contrast, the CE significantly decreased to less than 83% in the presence of 10 g·L-1 I- . The addition of Br and I- positively affected the EC, which decreased from 2514 kW·h·t-1 to approximately 2300 kW·h·t-1. The results of anodic polarization measurements showed that the voltage drops were 130 and 510 mV when the concentrations of Br- and I- were 10 g·L-1 at a eUlTent density of 400 A·m2, respectively. SEM images showed that the addition of Br- and I- caused different crystal growth mechanisms, which resulted in the production of compact and smooth zinc deposits. The anodic reactions of I were also studied.

Novel Nanostructured MnO_2 Prepared by Pulse Electrodeposition:Characterization and Electrokinetics

Pulse current technique was applied for the preparation of novel electroactive manganese dioxide and possible influences of different electrokinetic phenomena on material characteristics were discussed. The characterizations of pulse deposited sample （pcMD） were carried out by different techniques： Fourier transform infrared spectroscopy （FTIR）, scanning electron microscopy （SEM）, X-ray diffraction （XRD）, Brunauer-Emmett-Teller （BET） method, Raman spectroscopy, and atomic force microscopy （AFM）. SEM image revealed that pulse current could improve the current distribution. This was confirmed by AFM images showing a decrease in surface roughness of pcMDs in comparison to amorphous samples, which were deposited by direct current （dcMD）. Higher distortion of MnO6 octahedral environment of dcMD was detected by FTJR and Raman spectroscopy. Cyclic voltammetric （CV） measurements showed a generally higher energy level drained from the second electron discharge of pcMD. This is mainly attributed to a higher surface area and a lower diffusion pass of electrons and protons arisen via a rather unique nanostructural arrangement of pcMD grains. Results indicate a higher surface area available for the non homogenous second electron discharge of pcMD grains.