Nanoscale Zero-Valent Iron(nZVI)for Heavy Metal Wastewater Treatment:A Perspective

Industries such as non-ferrous metal smelting discharge billions of gallons of highly toxic heavy metal wastewater(HMW)worldwide annually,posing a severe challenge to conventional wastewater treatment plants and harming the environment.HMW is traditionally treated via chemical precipitation using lime,caustic,or sulfide,but the effluents do not meet the increasingly stringent discharge standards.This issue has spurred an increase in research and the development of innovative treatment technologies,among which those using nanoparticles receive particular interest.Among such initiatives,treatment using nanoscale zero-valent iron(nZVI)is one of the best developed.While nZVI is already well known for its site-remediation use,this perspective highlights its application in HMW treatment with metal recovery.We demonstrate several advantages of nZVI in this wastewater application,including its multifunctionality in sequestrating a wide array of metal(loid)s(>30 species);its capability to capture and enrich metal(loid)s at low concentrations(with a removal capacity reaching 500 mg·g^(-1)nZVI);and its operational convenience due to its unique hydrodynamics.All these advantages are attributable to nZVI’s diminutive nanoparticle size and/or its unique iron chemistry.We also present the first engineering practice of this application,which has treated millions of cubic meters of HMW and recovered tons of valuable metals(e.g.,Cu and Au).It is concluded that nZVI is a potent reagent for treating HMW and that nZVI technology provides an eco-solution to this toxic waste.

Synthesis of clay-supported nanoscale zero-valent iron using green tea extract for the removal of phosphorus from aqueous solutions

This study addresses the synthesis of nanoscale zero-valent iron(n ZVI) in the presence of natural bentonite(B-n ZVI) using green tea extract. The natural bentonite and B-n ZVI were then applied for the removal of phosphorus from aqueous solutions at various concentrations, p H levels and contact time. The desorption of phosphorus(P) from adsorbents was done immediately after sorption at the maximum initial concentration using the successive dilution method. The characterization of FTIR, SEM, and XRD indicated that n ZVI was successfully loaded to the surface of natural bentonite. The sorption of phosphorus on B-n ZVI was observed to be p H-dependent, with maximum phosphorus removal occurring at the p H range of 2 to 5. The results demonstrate that the maximum sorption capacities of natural bentonite and B-n ZVI were 4.61 and 27.63 mg·g^(-1), respectively.Langmuir, Freundlich, and Redlich–Peterson models properly described the sorption isotherm data. For either adsorbent, desorption isotherms did not coincide with their corresponding sorption isotherms, suggesting the occurrence of irreversibility and hysteresis. The average percentages of retained phosphorus released from natural bentonite and B-n ZVI were 80% and 9%, respectively. The results indicated that sorption kinetics was best described by the pseudo-second-order model. The present study suggests that B-n ZVI could be used as a suitable adsorbent for the removal of phosphorus from aqueous solutions.

Treatment of simulated wastewater containing Reactive Red 195 by zero-valent iron/activated carbon combined with microwave discharge electrodeless lamp/sodium hypochlorite

A comparative study of treatment of simulated wastewater containing Reactive Red 195 using zero-valent iron/activated carbon （ZVI/AC）, microwave discharge electrodeless lamp/sodium hypochlorite （MDEL/NaCIO） and the combination of ZVI/AC- MDEL/NaCIO was conducted. The preliminary results showed the two steps method of ZVI/AC-MDEL/NaCIO had much higher degradation efficiency than both single steps. The final color removal percentage was nearly up to 100% and the chemical oxygen demand reduction percentage was up to approximately 82%. The effects of operational parameters, including initial pH value of simulated wastewater, ZVI/AC ratio and particle size of ZVI were also investigated. In addition, from the discussion of synergistic effect between ZVI/AC and MEDL/NaCIO, we found that in the ZVI/AC-MEDL/NaCIO process, ZVI/AC could break the azo bond firstly and then MEDLfNaCIO degraded the aromatic amine products effectively. Reversing the order would reduce the degradation efficiency.

Eco friendly adsorbents for removal of phenol from aqueous solution employing nanoparticle zero-valent iron synthesized from modified green tea bio-waste and supported on silty clay

The present research investigated a novel route for the synthesis of nanoparticle zero-valent iron(NZVI)utilizing an aqueous extract of green tea waste as a reductant with ferric chloride.Also,the supported nanoparticle zerovalent iron was synthesized using natural silty clay as a support material(SC-NZVI).The NZVI and SC-NZVI were characterized by infrared spectroscopy(FTIR),scanning electron microscope(SEM),X-ray diffraction(XRD),Brunauer–Emmett–Teller(BET),and zeta potential(ζ).The interpretation of the results demonstrated that the polyphenol and other antioxidants in green tea waste can be used as reduction and capping agents in NZVI synthesis,with silty clay an adequate support.Additionally,the experiments were carried out to explore phenol adsorption by NZVI and SC-NZVI.To determine the optimum conditions,the impact of diverse experimental factors(i.e.,initial pH,adsorbent dose,temperature,and concentration of phenol)was studied.Langmuir,Freundlich,and Tempkin isotherms were used as representatives of adsorption equilibrium.The obtained results indicated that the adsorption processes for both NZVI and SC-NZVI well fitted by the Freundlich isotherm model.The appropriateness of pseudofirstorder and pseudosecondorder kinetics was investigated.The experimental kinetics data were good explained by the second-order model.The thermodynamic parameters(ΔH0,ΔS0,andΔG0)for NZVI and SC-NZVI were determined.The maximum removal rates of phenol at optimum conditions,when adsorbed onto NZVI and SC-NZVI,were found to be 94.8%and 90.1%,respectively.

Biochar Supported Nanoscale Zero-valent Iron Composites for the Removal of Petroleum from Wastewater

Considering the need for efficiently and rapidly treating oily wastewater while preventing secondary pollution,the nanoscale zero-valent iron(nZVI)was supported on biochar prepared by using a spent mushroom substrate(SMS),to produce an iron-carbon composite(SMS-nZVI).The ability of the SMS-nZVI to treat wastewater containing high concentration of oil was then comprehensively evaluated.The morphology,structure,and other properties of the composite were characterized by using scanning electron microscopy,transmission electron microscopy,the Brunauer-Emmett-Teller nitrogen sorption analysis,and the Fourier transform infrared spectroscopy.The results show that the biochar prepared by using the SMS can effectively prevent the agglomeration of nZVI and increase the overall specific surface area,thereby enhancing the absorption of petroleum by the composite.Experiments reveal that compared with the SMS and nZVI,the SMS-nZVI composite removes petroleum faster and more efficiently from wastewater.Under optimized conditions involving an nZVI to biochar mass ratio of 1:5 and a pH value of 4,the efficiency for removal of petroleum from wastewater with an initial petroleum concentration of 1000 mg/L could reach 95%within 5 h.Based on a natural aging treatment involving exposure to air for 30 d,the SMS-nZVI composite retained an oil removal rate of higher than 62%,and this result could highlight its stability for practical applications.

Study of diclofenac removal by the application of combined zero-valent iron and calcium peroxide nanoparticles in groundwater

Diclofenac(DCF)is one of the most frequently detected pharmaceuticals in groundwater,posing a great threat to the environment and human health due to its toxicity.To mitigate the DCF contamination,experiments on DCF degradation by the combined process of zero-valent iron nanoparticles(nZVI)and nano calcium peroxide(nCaO_(2))were performed.A batch experiment was conducted to examine the influence of the adding dosages of both nZVI and nCaO_(2)nanoparticles and pH value on the DCF removal.In the meantime,the continuous-flow experiment was done to explore the sustainability of the DCF degradation by jointly adding nZVI/nCaO_(2)nanoparticles in the reaction system.The results show that the nZVI/nCaO_(2)can effectively remove the DCF in the batch test with only 0.05 g/L nZVI and 0.2 g/L nCaO_(2)added,resulting in a removal rate of greater than 90%in a 2-hour reaction with an initial pH of 5.The degradation rate of DCF was positively correlated with the dosage of nCaO_(2),and negatively correlated with both nZVI dosage and the initial pH value.The order of significance of the three factors is identified as pH value>nZVI dosage>nCaO_(2)dosage.In the continuous-flow reaction system,the DCF removal rates remained above 75%within 150 minutes at the pH of 5,with the applied dosages of 0.5 g/L for nZVI and 1.0 g/L for nCaO_(2).These results provide a theoretical basis for the nZVI/nCaO_(2)application to remove DCF in groundwater.

Enhanced degradation of carbon tetrachloride by surfactant-modified zero-valent iron

Sorption of carbon tetrachloride （CT） by zero-valent iron （ZVI） is the rate-limiting step in the degradation of CT, so the sorption capacity of ZVl is of great importance. This experiment was aimed at enhancing the sorption of CT by ZVI and the degradation rate of CT by modification of surfactants. This study showed that ZVI modified by cationic surfactants has favorable synergistic effect on the degradation of CT. The CT degradation rate of ZVI modified by cetyl pyridinium bromide （CPB） was higher than that of the unmodified ZVI by 130%, and the CT degradation rate of ZVI modified by cetyl trimethyl ammonium bromide （CTAB） was higher than that of the unmodified ZVI by 81%. This study also showed that the best degradation effect is obtained at the near critical micelle concentrations （CMC） and that high loaded cationic surfactant does not have good synergistic effect on the degradation due to its hydrophilicity and the block in surface reduction sites. Furthermore degradation of CT by ZVI modified by nonionic surfactant has not positive effect on the degradation as the ionic surfactant and the ZVI modified by anionic surfactant has hardly any obvious effects on the degradation.

H₂Gas Charging of Zero-Valent Iron and TCE Degradation

Granular zero-valent iron (ZVI) has been widely used to construct permeable reactive barriers (PRB) for the in situ remediation of groundwater contaminated with halogenated hydrocarbons. In the anaerobic condition of most groundwater flow systems, iron undergoes corrosion by water and results in hydrogen gas generation. Several studies have shown that some of the hydrogen gas generated at the iron/water interface can diffuse into the iron lattice. Hydrogen gas also can be an electron donor for dechlorination of chlorinated compounds. In this study, the possibility of hydrogen gas bound in the lattice of ZVI playing a role in dehalogenation and improving the degradation efficiency of ZVI was evaluated. Two different granular irons were tested: one obtained from Quebec Metal Powders Ltd (QMP) and the other from Connelly-GPM. Ltd. For each type of iron, two samples were mixed with water and sealed in testing cells. Since the rate of hydrogen entry varies directly with the square root of the hydrogen pressure, one sample was maintained for several weeks under near-vacuum conditions to minimize the amount of hydrogen entering the iron lattice. The other sample was maintained for the same period at a hydrogen pressure of over 400 kPa to maximize the amount of hydrogen entering the iron lattice. The degradation abilities of the reacted ironsand the original iron materials were tested by running several sets of batch tests. The results of this study show little to no improvement of inorganic TCE degradation reactions due to the presence of lattice-stored hydrogen in iron material. This is probably due to the high energiesrequired to release hydrogen trapped in the iron lattice. However, there are certain chemical compounds that can promote hydrogen release from the iron lattice, and there may be bacteria that can utilize lattice-bound hydrogen to carry out dechlorination reactions.

Remediation of Nitrate and ChromiumContaminated Groundwater by Zero-valent IronPRB

Through continuous flow experimentation, the reactivity characteristics of zero-valent iron （Fe0）-PRB with ground watercontaminated by nitrate, chromium and the combination of nitrate and chromium were investigated. The results showed thatnitrate could be effectively deoxidized by zero-valent iron. NO^2- -N was the transitional deoxidization product, while NH4＋-Nwas the main final product in the effluent. Chromium could be deoxidized by zero-valent iron more effectively for the chromiumcontaminated ground water which was treated by PRB. The redox products such as Fe3＋ and Cr（III） precipitated on the packingmedia during the process. For the treatment of ground water contaminated by both nitrate and chromium, the results showed thatthe Cr（VI） removal efficiency by the zero-valent iron was not affected by the co-existence of NO^3- -N, while the NO^3- -N removalefficiency decreased with the existence of Cr（VI）.

Corrosion behaviors and kinetics of nanoscale zero-valent iron in water:A review

Knowledge on corrosion behaviors and kinetics of nanoscale zero-valent iron(nZVI)in aquatic environment is particularly significant for understanding the reactivity,longevity and stability of nZVI,as well as providing theoretical guidance for developing a cost-effective nZVI-based technology and designing large-scale applications.Herein,this review gives a holistic overview on the corrosion behaviors and kinetics of nZVI in water.Firstly,Eh-pH diagram is introduced to predict the thermodynamics trend of iron corrosion.The morphological,structural,and compositional evolution of(modified-)nZVI under different environmental conditions,assisted with microscopic and spectroscopic evidence,is then summarized.Afterwards,common analytical methods and characterization technologies are categorized to establish time-resolved corrosion kinetics of nZVI in water.Specifically,stable models for calculating the corrosion rate constant of nZVI as well as electrochemical methods for monitoring the redox reaction are discussed,emphasizing their capabilities in studying the dynamic iron corrosion processes.Finally,in the future,more efforts are encouraged to study the corrosion behaviors of nZVI in long-term practical application and further build nanoparticles with precisely tailored properties.We expect that our work can deepen the understanding of the nZVI chemistry in aquatic environment.

Effects of zero-valent iron added in the flooding or drainage process on cadmium immobilization in an acid paddy soil

Zero-valent iron(ZVI)is a promising material for the remediation of Cd-contaminated paddy soils.However,the effects of ZVI added during flooding or drainage processes on cadmium(Cd)retention remain unclear.Herein,Cd-contaminated paddy soil was incubated for 40days of flooding and then for 15 days of drainage,and the underlying mechanisms of Cd immobilization coupled with Fe/S/N redox processes were investigated.The addition of ZVI to the flooding process was more conducive to Cd immobilization.Less potential available Cd was detected by adding ZVI before flooding,which may be due to the increase in paddy soil pH and newly formed secondary Fe minerals.Moreover,the reductive dissolution of Fe minerals promoted the release of soil colloids,thereby increasing significantly the surface sites and causing Cd immobilization.Additionally,the addition of ZVI before flooding played a vital role in Cd retention after soil drainage.In contrast,the addition of ZVI in the drainage phase was not conducive to Cd retention,which might be due to the rapid decrease in soil pH that inhibited Cd adsorption and further immobilization on soil surfaces.The findings of this study demonstrated that Cd availability in paddy soil was largely reduced by adding ZVI during the flooding period and provide a novel insight into the mechanisms of ZVI remediation in Cd-contaminated paddy soils.

Enhancing corn stalk-based anaerobic digestion with different types of zero-valent iron added during the acidification stage:Performance and mechanism

Anaerobic digestion has been defined as a competitive approach to facilitate the recycling of corn stalks.However,few studies have focused on the role of direct interspecies electron transfer(DIET)pathway in the acidification stage under the addition of different particle sizes of zero-valent iron(ZVI).In this study,three types of ZVI,namely iron filings,iron powder and nanoscale iron,were investigated,respectively,to enhance its high-value conversion.Variations in volatile fatty acids(VFAs)and methane(CH4)production associated with the underlyingmechanisms were emphatically determined.Results indicated that the addition of ZVI could increase the concentration of VFAs,with the most outstanding performance observed with the use of nanoscale iron.Importantly,the conversion of propionic acid to acetic acid was driven by adding ZVI with no between-group differences in acidizing phase.Conversely,the substrate was more fully utilized when supplied with iron powder compared with other groups in methanogenic phase,thereby displaying the maximumCH4 yield with a value of 263.1 mL/(g total solids(TS)).However,adding nanoscale iron could signally shorten the digestion time(T80),saving 7 days in comparison to the group of iron powder.

Amino acids modified nanoscale zero-valent iron:Density functional theory calculations,experimental synthesis and application in the Fenton-like degradation of organic solvents

To improve the adsorption and catalytic performance of heterogeneous Fenton-like catalysts for oil wastes,amino acids were used to modify nanoscale zero-valent iron(AA@Fe^(0)),which were applied in the Fenton-like degradation of organic solvents(tributyl phosphate and n-dodecane,named TBP and DD).Twelve amino acids,i.e.,glycine(Gly),alanine(Ala),leucine(Leu),proline(Pro),phenylalanine(Phe),methionine(Met),cysteine(Cys),asparagine(Asn),serine(Ser),glutamic acid(Glu),lysine(Lys)and arginine(Arg),were selected and calculated by density functional theory(DFT).The optimized structure,charge distribution,the highest occupied molecular orbital(HOMO),the lowest unoccupied molecular orbital(LUMO),interaction region indicator(IRI)isosurface map and adsorption energy of AA@Fe^(0),AA@Fe^(0)-TBP and AA@Fe^(0)-DD were studied,which indicated that Fe is more likely to approach and charge transfer with-COO and-NH_(3) on theα-carbon of amino acids.There is strong attraction between Fe and–COO,and Van der Waals force between Fe and-NH_(3),respectively.In the interaction of AA@Fe^(0)with TBP and DD,Van der Waal force plays an important role.AA@Fe^(0)was synthesized in laboratory and characterized to investigate physicochemical properties.In Fenton-like degradation of organic solvents,the change of COD in water phase during the degradation process as well as the volume of the organic phase after the reaction were investigated.The results of calculations combined with experiments showed that Ser-modified Fe^(0)performed the best in these amino acids,with 98%removal of organic solvents.A possible catalytic mechanism was proposed in which amino acids acted a linking role between Fe and organic solvents,activating H_(2)O_(2)to generate hydroxyl radicals for the degradation of organic solvents.

Alcohothermal synthesis of sulfidated zero-valent iron for enhanced Cr(Ⅵ)removal

Sulfidation of zero-valent iron(ZVI)has attracted broad attention in recent years for improving the sequestration of contaminants from water.However,sulfidated ZVI(S-ZVI)is mostly synthesized in the aqueous phase,which usually causes the formation of a thick iron oxide layer on the ZVI surface and hinders the efficient electron transfer to the contaminants.In this study,an alcohothermal strategy was employed for S-ZVI synthesis by the one-step reaction of iron powder with elemental sulfur.It is found that ferrous sulfide(FeS)with high purity and fine crystallization was formed on the ZVI surface,which is extremely favorable for electron transfer.Cr(Ⅵ)removal experiments confirm that the rate constant of SZVI synthesized by the alcohothermal method was 267.1-and 5.4-fold higher than those of un-sulfidated ZVI and aqueous-phase synthesized S-ZVI,respectively.Systematic characterizations proved that Cr(Ⅵ)was reduced and co-precipitated on S-ZVI in the form of a Fe(Ⅲ)/Cr(Ⅲ)/Cr(Ⅵ)composite,suggesting its environmental benignancy.

Nonmetallic modified zero-valent iron for remediating halogenated organic compounds and heavy metals: A comprehensive review

Zero-valent iron(ZVI),an ideal reductant treating persistent pollutants,is hampered by issues like corrosion,passivation,and suboptimal utilization.Recent advancements in nonmetallic modified ZVI(NM-ZVI)show promising potential in circumventing these challenges by modifying ZVI's surface and internal physicochemical properties.Despite its promise,a thorough synthesis of research advancements in this domain remains elusive.Here we review the innovative methodologies,regulatory principles,and reduction-centric mechanisms underpinning NM-ZVI's effectiveness against two prevalent persistent pollutants:halogenated organic compounds and heavy metals.We start by evaluating different nonmetallic modification techniques,such as liquid-phase reduction,mechanical ball milling,and pyrolysis,and their respective advantages.The discussion progresses towards a critical analysis of current strategies and mechanisms used for NM-ZVI to enhance its reactivity,electron selectivity,and electron utilization efficiency.This is achieved by optimizing the elemental compositions,content ratios,lattice constants,hydrophobicity,and conductivity.Furthermore,we propose novel approaches for augmenting NM-ZVI's capability to address complex pollution challenges.This review highlights NM-ZVI's potential as an alternative to remediate water environments contaminated with halogenated organic compounds or heavy metals,contributing to the broader discourse on green remediation technologies.

Degradation of Nitrobenzene Wastewater via Iron/Carbon Micro-electrolysis Enhanced by Ultrasound Coupled with Hydrogen Peroxide

The zero valent iron/granular active carbon(ZVI/GAC) micro-electrolysis enhanced by ultrasound(US) coupled with hydrogen peroxide(H_2O_2) was investigated for the deep degradation of nitrobenzene-containing wastewater. The results of scanning electron microscopy-energy dispersive X-rays analysis(SEM-EDS) demonstrated that continuously accelerated regeneration of ZVI and GAC in situ by US could improve the process for converting nitrobenzene(NB) to aniline(AN). H_2O_2 was decomposed catalytically by the byproduct Fe^(2+) ions generated in the micro-electrolysis process to hydroxyl radicals and the organic pollutants in the wastewater were finally mineralized to CO2 and H2O. Effects of the ZVI dosage, the ZVI/GAC mass ratio, the initial pH value and the H_2O_2 dosage on the efficiency for degradation of NB were studied in these experiments. The optimal operating conditions covered a ZVI dosage of 15 g/L, a ZVI/GAC mass ratio of 1:2,an initial pH value of 3 and a H_2O_2 dosage of 4 mL. In this case, the NB removal efficiency reached 97.72% and the total organic carbon(TOC) removal efficiency reached 73.42% at a NB concentration of 300 mg/L. The reduction of NB by USZVI/GAC followed the pseudo-first-order kinetics model, and the pseudo-first-order rate constants were given at different initial pH values. The reaction intermediates such as AN, benzoquinonimine, p-benzoquinone, p-nitrophenol and other organic acids were detected and a probable pathway for NB degradation has been proposed.

Ultrasound enhancement of the reduction of the Basic Green dye in wastewater by cast iron

Dyes in wastewater are of particular environmental concern since they give an undesirable color to the waters, dye and their derivatives are harmful to human health and the environment （ Annadurai et al., 2002）. Due to their biological persistency, conventional biological treat-ment processes such as activated sludge process are ineffective for their removal（Shaul et al., 1991）. There is a need to develop effective methods for the degradation of such persistent organic pollutants, either to less harmful compounds or, more desirable, to their complete mineralization.

Surfactant-assisted removal of 2,4-dichlorophenol from soil by zero-valent Fe/Cu activated persulfate

The organic compounds contaminated soil substantially threatens the growth of plants and food safety.In this study,we synthesis zero-valent bimetallic Fe/Cu catalysts for the degradation of 2,4-dichlorophenol(DCP)in soils with persulfate(PS)in combination of organic surfactants and exploring the main environmental impact factors.The kinetic experiments show that the 5%(mass)dosage of Fe/Cu exhibits a higher degradation efficiency(86%)of DCP in soils,and the degradation efficiency of DCP increases with the increase of the initial PS concentration.Acidic conditions are favorable for the DCP degradation in soils.More importantly,the addition of Tween-80,and Triton-100 can obviously desorb DCP from the soil surface,which enhances the degradation efficiency of DCP in soils by Fe/Cu and PS reaction system.Furthermore,the Quenching experiments demonstrate that SO_(4)^(-1)·and·OH are the predominant radicals for the degradation of DCP during the Fe/Cu and PS reaction system as well as non-radical also exist.The findings of this work provide an effective method for remediating DCP from soils.

Determining the Thermal Conductivity in Walls of Cast Iron Castings by the Ultrasound Technique

Research results concerning the application of ultrasound technique for determining the averaged thermal conductivity in walls of castings produced of cast iron(solidifying in a steady system)containing carbon precipitates in a graphite form,are presented in the hereby paper.Investigations concern castings of unalloyed cast iron.The influence of the form of graphite precipitates on the cast iron thermal conductivity as well as on the propagation velocity of the ultrasound wave,including the longitudinal wave velocity CL,was investigated in the study.The influence of the graphite form,described by the shape indicator(f),on the thermal conductivity(l)(determined on samples by the steady heat flow method)as well as the influence of this indicator(f)on the wave propagation velocity(CL),was investigated.A series of melts of cast iron,of the near eutectic chemical composition,were performed.Magnesium introduced in a wide range,allowed obtaining various graphite forms from flake,via mixed,vermicular to nodular.Dependences:l=f(CL),CL=f(f)were determined and at the final phase the empirical dependencel=f(CL)was also determined.The thermal conductivity and ultrasound wave velocity were tested on the same samples.The thermal conductivity coefficient of cast iron(l)was changing in a wide range from approximately 32 to 46 W/s·m,while the wave velocity CL respectively:from approximately 4,300 to 5,800 m/s.The empirical dependencel=f(CL),determined in the described variability ranges,is of a linear character and the correlation level equals:R2=0.87.The validation of the experimental results was performed on cast iron castings of slag ladles,since they are required to be of a good thermal conductivity.The possibility of assessing the thermal conductivity directly in walls of such castings by means of non-destructive ultrasound method,was confirmed.The real thermal conductivity determined in the walls of the castings is used to simulate the heating and cooling process of slag ladles,ingot molds and similar structures,which was one of the main objectives of the research.

珊瑚状镧铁金属氧化物复合材料的制备及其气敏性能研究

以硝酸镧、硝酸铁为原料,尿素为沉淀剂,十六烷基三甲基溴化铵为分散剂,采用微波-超声辅助法和煅烧工艺,制备珊瑚状镧铁金属氧化物复合材料用于三乙胺检测,考察不同镧铁摩尔比对材料结构和气敏性能的影响。结果表明:当原料中镧铁摩尔比为2∶1时,获得的珊瑚状镧铁金属氧化物复合材料LFO1在工作温度为250℃时对100×10^(-6)g/mL三乙胺气体的灵敏度响应值达到505,检测限为2.8×10^(-6)g/mL,并具有良好的选择性、稳定性以及快速响应特性。这种优异的气敏性能归因于珊瑚状结构所具有的大比表面积为LFO1提供了大量活性位点,从而增强其对三乙胺气体的吸附和扩散能力。