Optimized Ultrasound-assisted Extraction of Proacyanidins from Purple Cabbage

[Objective] The paper was to optimize ultrasound-assisted extraction of proacyanidins from purple cabbage. [Method] The ultrasound-assisted extraction technology was used to study the extraction of proacyanidins from purple cabbage. The effect of ethanol concentration, temperature, time, material-solution ratio and the power of ultrasound on extracting efficiency were studied by single-factor experiment. Based on this, L16（4%orthogonal test were conducted to determine the optimal condi- tion for extraction of proacyanidins from purple cabbage. [Result] The optimal condi- tion for extraction of proacyanidins from purple cabbage was as follows： ethanol concentration 50%, extraction temperature 50℃, extraction time 1 h, extraction power 540 W, material-liquid ratio 1：20. The extraction rate of procyanidins under this condition reached 104.8 mg/g. [Conclusion] The study provided a theoretical basis for scientific and reasonable utilization of procyanidins in purple cabbage.

Enhanced extraction of essential oil from Cinnamomum cassia bark by ultrasound assisted hydrodistillation

Cinnamon essential oil with many bioactivities is an important raw material for the production of various chemicals,and the conventional hydrodistillation(HD)for cinnamon oil extraction always require a longer extraction time.In this work,ultrasound-assisted hydrodistillation extraction(UAHDE)technique was employed to enhance the extraction efficiency of essential oils from cinnamon barks.The parameters with significant effects on the essential oil extraction efficiency(ultrasound time,ultrasound power,extraction time,liquid–solid ratio)were optimized,and the proposed UAHDE was compared with the conventional HD extraction in terms of the extraction time,extraction yield,and physicochemical properties of extracted oils.Compared to the HD extraction,the UAHDE resulted in a shorter extraction time and a higher extraction yield.Using GC–MS analysis,the UAHDE provided more valuable essential oil with a high content of the vital trans-cinnamaldehyde compounds compared with the HD.Scanning electron micrograph(SEM)confirmed the efficiency of ultrasound irradiation for cinnamon oil extraction.In addition,the analysis of electric consumption and CO_(2) emission shows that the UAHDE process is a more economic and environment-friendly approach.Thus,UAHDE is an efficient and green technology for the cinnamon essential oil extraction,which could improve the quantity and quality of cinnamon oils.

Optimization of ultrasound-assisted extraction of camptothecin from Camptotheca acuminata seeds

Naturally occurring camptothecin（CPT） is an important source of chemotherapeutic agents.The extraction from Camptotheca acuminata is still the main approach to obtain CPT compared with total synthesis.In the present study,ultrasound-assisted extractions（UAE） of CPT from C.acuminata seeds with alkaline solutions were investigated and CPT yield were determined by High Performance Liquid Chromatography.The conditions of alkaline species and concentrations,extraction time,extraction temperature and ultrasonic power were optimized.Results show that both Na3PO4 and Na2CO3 solutions gain good extraction yields,whereas Na3PO4 solution has stronger basicity and need higher concentration than Na2CO3 solution does,thus aqueous Na2CO3 is more beneficial for the extraction.The optimal condition was ultrasonically extracted with 0.5% aqueous Na2CO3 at 50°C and ultrasonic power of 400 W for 60 min.Comparing with UAE with ethanol,the extraction with 0.5% Na2CO3 solution achieves higher yield.Moreover,aqueous Na2CO3 as a solvent has various advantages including non-toxicity,inflammable,non-corrosive and low cost,which ensure this UAE method is a superior method with high utilizing prospect.

Determination of Five (5) Possible Contaminants in Recycled Cardboard Packages and Food Simulants Using Ultrasound Assisted Extraction Coupled to GC-MS

A modified analytical procedure has been developed to test for 5 organic pollutants [benzophenone, 2 diisopropylnaphthalenes (DIPNs) {2,6- and 2,7-diisopropylnapthalene} and 2 hydrogenated terphenyls (HTPs) {m-terphenyl and o-terphenyl}] that can be found as residues in recycled cardboards intended for use as food packaging materials and to test for migration levels of these compounds in a food simulant (Tenax). A main objective was to develop a modified rapid and reliable method for the identification and quantification of these compounds at low concentrations. The method was based on ultrasound-assisted solvent extraction (UAE) followed by gas chromatography-mass spectrometry (GC-MS) analysis. The developed method was applied to analyze 3 commercially available recycled carton board food-packaging materials and also to study the potential migration of the 5 organic pollutants from these materials into Tenax to check if these recycled cardboards can be considered as suitable for use in direct contact with foodstuffs. The limits of detection (LODs) of standard solutions of the 5 compounds were determined at a signal-to-noise ratio of 3. The LODs and the limits of quantification (LOQs) of examined pollutants ranged between 0.005 to 0.5 mg/kg, and 0.1 to 1 mg/kg, respectively. The extremely low amounts of most contaminants that migrate from packaging materials to Tenax indicate that the recycled cardboards tested can be safely used for direct food contact applications.

Ultrasound-assisted extraction of antioxidant polyphenolic compounds from Nephelium lappaceum L.(Mexican variety) husk

Objective: To reach the recovery and identification of antioxidant polyphenolic compounds from Nephelium lappaceum L.(Mexican variety) husk using ultrasound-assisted extraction and liquid chromatography/mass spectrometry as well as the in vitro antioxidant activity. Methods: Rambutan husk extracts were obtained by ultrasound-assisted extraction, mass/volume ratio, water/ethanol percentage and extraction time were evaluated. Once the best extraction condition of polyphenolic compounds was defined, a polyphenolic fraction was recovered using Ambetlite XAD-16. The total content of antioxidant polyphenolic compounds was determined by summation of the total hydrolysable polyphenol and total condensed polyphenol contents. Recovered compounds were identified by FTIR(ATR) spectroscopy and HPLC/ESI/MS. The antioxidant activity was carried out by ABTS, DPPH and lipid oxidation inhibition in vitro methods. Results: In Mexican variety rambutan husk, the total polyphenolic content was 487.67 mg/g, after ultrasound-assisted extraction. According to the HPLC/ESI/MS analysis 12 antioxidant polyphenolic compounds were identified, mostly ellagitannins such as geraniin, corilagin and ellagic acid. The antioxidant activity determined by ABTS, DPPH and lipid oxidation inhibition methods was demonstrated. The main functional groups of the identified compounds were determined by FTIR analysis. Conclusions: It was demonstrated that ultrasound-assisted extraction was effective and allowed the extraction and recovery of antioxidant polyphenolic compounds. Furthermore Mexican variety rambutan husk is an important source for recovering polyphenolic compounds with antioxidant activity, these compounds have potential application for the treatment/prevention of various diseases related to cancer and pathogenic microorganisms.

Extraction Process of Green Pigment from Leaves of Arctium lappa L. by Ultrasound Assisted Method and Its Stability Study

[Objectives] The research aimed to extract green pigment from leaves of Arctium lappa L. and inspect its stability. [Methods] Ultrasound assisted method was used. [Results] Water bath temperature had little impact on green pigment, and Al^(3+), Cu^(2+), Mg^(2+) and Zn^(2+) in metal ions greatly affected green pigment, while Fe^(3+) had very little impact on the stability of green pigment. pH did not basically affect green pigment of A. lappa L. [Conclusions] The extraction rate and stability of green pigment from leaves of A. lappa L. were higher, and it was one of materials suitable for extracting green pigment.

Optimization of Ethanol-Ultrasound-Assisted Destabilization of a Cream Recovered from Enzymatic Extraction of Soybean Oil

A novel method using ethanol and ultrasound to extract oil from cream obtained from enzyme-assisted aqueous extraction of soybean oil was developed.To evaluate the relationships between operating variables and free oil yield and to maximize the free oil yield,response surface methodology was introduced in this work.The developed regression model was fitted with R2=0.9591.Optimized variables were:ethanol concentration of73%,ethanol addition volume of 0.55 L/kg,ultrasound power of 427 W,ultrasound time of 47 s,and ultrasound temperature of 53℃.The free oil yield from the cream under the above conditions was 92.6±3.4%.Scanning electron microscopy(SEM)was used to evaluate the effect of ultrasonic treatment on ethanoltreated cream,and the SEM images clearly showed that the ultrasound treatment affected dispersing and fracturing of the microstructure of ethanol-treated cream.

Ionic Liquid-Based Ultrasound-Assisted Emulsification Microextraction Coupled with HPLC for Simultaneous Determination of Glucocorticoids and Sex Hormones in Cosmetics

An effective and environmentally friendly method based on ionic liquid-based ultrasound-assisted emulsification microextraction(IL-USAEME) and high performance liquid chromatography (HPLC) has been developed for the determination of nine hormones including three glucocorticoids, one androgen and five progestogens in cosmetics. Several factors that affect the extraction efficiency, such as the kinds and volume of ionic liquid, salt concentration, ultrasonic power and time, and centrifugation time were investigated and optimized. Under the optimum extraction condition, the recoveries of analytes ranged from 85.97% to 108.84% except prednisolone (62.30%). The intraday and interday precision was below 2.51% and 3.30%, respectively.

Response Surface Optimization of Ultrasound-assisted Aqueous Two-phase Extraction of Sweet Potato Leaf Polysaccharides

[Objectives]The ultrasound-assisted aqueous two-phase extraction of sweet potato leaf polysaccharides was studied.[Methods]With the yield of sweet potato leaf polysaccharides as the index,the aqueous two-phase extraction system was determined,and the optimal extraction conditions were optimized by single-factor experiments and response surface methodology.[Results]The optimal parameters were ethanol concentration 25.68%,liquid-to-material ratio 55.83,and ultrasonic treatment time 38.33 min.Under these conditions,the yield of sweet potato leaf polysaccharides could reach 20.646 mg/g.[Conclusions]The ethanol/ammonium sulfate aqueous system is a rapid and efficient method for extracting sweet potato leaf polysaccharides,which is of great significance for the application of sweet potato leaf extract as a natural food additive.

Pectinmethylesterase extraction from orange solid wastes: Optimization and comparison between conventional and ultrasound-assisted treatments

During orange juice production, a half of fresh oranges weight is considered as production waste (peels, pulp, seeds, orange leaves and damaged orange fruits). An alternative for the management of these wastes is their treatment by addition of lime and a latter pressing, obtaining a press cake and a press liquor rich in sugars (10°Brix) and citric acid, protein, pectin and ethanol. For non-thermal concentration of press liquor to obtain citruss molasses (65°-70°Brix), the removal of pectin is necessary. Traditionally, depectinization of juices has been done by using pectinmethylesterase (PME) enzymes from external sources. In this work it performed the extraction of PME enzymes from orange peels to obtain the optimum extraction conditions. Two different methods of solventextraction were compared (conventional andultrasound-assisted methods). For the conventional extraction experiments, a central composite design with three variables ([NaCl], pH and time) and five replicates of the center point was used. For ultrasound-assisted extraction, experiments were done at pH = 5.5 and [NaCl] = 1.25M), varying extraction time (1-30 min). Response variables were PME activity, protein content and a ratio between them, named PME effectiveness (ηPME). At the same experimental conditions (pH =5.5, [NaCl] = 1.25 M, t = 15 min) it was found that conventional extractions led to slightly better results in terms of ηPME than ultrasound-assisted extraction method.

Effect of Ultrasound-Assisted Extraction of Phenolic Compounds on the Characteristics of Walnut Shells

Walnuts are one of nature’s more waste-heavy products. 67% of the nut is shell and husk, low value by-products that are rich in phenolic compounds. The phenolic compounds extracted from walnut shells are potentially good natural sources of antioxidants for the food and pharmaceutical industries. In this study, phenolic compounds were extracted using an ultrasonic bath, an ultrasonic probe and a standard shaking method. The extraction yield achieved with an ultrasonic probe was 51.2 mg GAE/g DW, two times higher than both the shaking method and the ultrasonic bath method which were 20.6 mg GAE/g DW and 25.8 mg GAE/g DW, respectively. Phenolic extraction was further improved by a size reduction of the walnut shells. The best extraction yield of 52.8 mg GAE/g DW was attained when the particle size was between 45 - 100 mesh. The ultrasonic probe treatment is the best method for extraction of phenolic compounds from walnut shells. Scanning electron microscopy (SEM) imaging indicated that the ultrasonic probe treatment could better rupture the hard structure of the cells, increasing the penetration of solvents and thus the extraction yield.

Ultrasound-Assisted Emulsification Dispersive Liquid-Liquid Microextraction Based on Solidification of Floating Organic Droplet for Separation of Trace Gold Prior to Flame Atomic Absorption Spectroscopy Determination

In the present work, a ultrasound-assisted emulsification dispersive liquid-liquid microextraction based on solidification of floating organic droplet method has been developed as a sample preparation method prior to flame atomic absorption spectrometry determination of trace amounts of gold in the standard, wastewater and river water samples. In the proposed method, 1-dodecanol and 5-(4-dimethylamino-benzylidene) were used as extraction solvent and chelating agent, respectively. Several factors that may be affected on the ex-traction process, such as type and volume of the extraction solvent, ionic strength, pH of the aqueous solu-tion, extraction temperature and extraction time were studied and optimized. Under the best experimental conditions, the calibration curve exhibited linearity over the range of 8.0 ng●mL-1- 3.0 μg●mL-1 with a correlation coefficient of 0.9978 and detection limit based on three times the standard deviation of the blank signal was 1.5 ng●mL-1. Eight replicate determinations of 0.2 and 1.0 μg●mL-1 of gold gave a mean absorbance of 0.051 and 0.253 with relative standard deviations of ±2.3% and ±1.5%, respectively. Finally, the developed method was successfully applied to the extraction and determination of gold ions in a silica ore, wastewater, river water and standard samples and satisfactory results were obtained.

Effect of Process Parameters of Microwave Assisted Extraction (MAE) on Polysaccharides Yield from Pumpkin

Process parameters of microwave assisted extraction （MAE） of the polysaccharides from pumpkin viz. extraction temperature, time and liquid-solid ratio were studied by using single factor and response surface methodology method. The results showed that the liquid-solid ratio was the most important factor in polysaccharides yield, followed the extraction temperature was the least important factor. The optimum microwave assisted extraction co by ndi extraction time, and tions for the highest polysaccharides yield from pumpkin （16.76%-4-0.38%） were obtained by using the response surface methodology with extraction time of 29 min, an extraction temperature of 79 ℃ and a liquid-solid ratio of 22 mL·g^-1. Validation experiment result well agreed with predicted value.

Ultrasonically Assisted Extraction of Isoflavones from Stem of Pueraria lobata （Willd.） Ohwi and Its Mathematical Model

Ultrasonically assisted extraction of isoflavones from the stem of Pueraria lobata （Willd.） Ohwi has been carried out with an ultrasonic extracting apparatus （20kHz, electrical power input to the transducer in 0-650W）. The influence of the electrical power input and extraction time on the＇extraction yield is investigated in water, n-butanol, and 95% （by volume） and 50% （by volume） ethanol aqueous solution. The experimental results indicate that the yields of total isoflavones are higher in ultrasonically assisted extraction than those obtained from con-ventional extraction.Moreover,a mathematical model is proposed,by introducing the electrical power input to index the ultrsound intensity,to describe the behavior of ultrasonically assisted extraction.It is found that the model calcuations are in good agreement with the experimental data.

Salting-Out Assisted Liquid-Liquid Extraction Combined with HPLC for Quantitative Extraction of Trace Multiclass Pesticide Residues from Environmental Waters

In this study, salting-out assisted liquid-liquid extraction combined with high performance liquid chromatography diode array detector (SALLE-HPLC-DAD) method was developed and validated for simultaneous analysis of carbaryl, atrazine, propazine, chlorothalonil, dimethametryn and terbutryn in environmental water samples. Parameters affecting the extraction efficiency such as type and volume of extraction solvent, sample volume, salt type and amount, centrifugation speed and time, and sample pH were optimized. Under the optimum extraction conditions the method was linear over the range of 10 - 100 μg/L (carbaryl), 8 - 100 μg/L (atarzine), 7 - 100 μg/L (propazine) and 9 - 100 μg/L (chlorothalonil, terbutryn and dimethametryn) with correlation coefficients (R2) between 0.99 and 0.999. Limits of detection and quantification ranged from 2.0 to 2.8 μg/L and 6.7 to 9.5 μg/L, respectively. The extraction recoveries obtained for ground, lake and river waters were in a range of 75.5% to 106.6%, with the intra-day and inter-day relative standard deviation lower than 3.4% for all the target analytes. All of the target analytes were not detected in these samples. Therefore, the proposed SALLE-HPLC-DAD method is simple, rapid, cheap and environmentally friendly for the determination of the aforementioned herbicides, insecticide and fungicide residues in environmental water samples.

MICROWAVE-ASSISTED EXTRACTION OF GLYCYRRHIZIC ACID FROM LICORICE ROOT-EFFECT OF THE PROPERTY OF SOLUTION ON EXTRACTION OF GA

The property of extraction solution is an important factor influencing the extraction efficiency. In the present work, the effect of the property of solution on extraction of GA was studied, which including the concentration of ethanol, ammonia and cation (M+), pH of extraction solution, different kinds of organic solvent etc. The results show that 50%-60%(v/v) ethanol can reach high percentage extraction of GA. If 1% (v/v) ammonia solution was added into 60%(v/v) ethanol, the percentage extraction can be increased from 2.0% to 2.31%. Without ammonia, 50mmol/L [M+] (M+ = K+, NH4+) was added into 60%(v/v) ethanol, percentage extraction of GA can reach about 2.26%. If pH of solution (60% ethanol) was adjust to pH=4.0, it can reach high percentage extraction. If pH of solution (60% ethanol + 50mmol [M+], pH=6.1) was adjust tO PH=4.0, especially M+ is K+ or NH4+, it can reach almost same extraction efficiency as that of 1% ammonia solution + 60% ethanol, and the operation environment can be greatly improved.

Comparative study of functional optical zone:small incision lenticule extraction versus femtosecond laser assisted excimer laser keratomileusis

AIM:To investigate the size of functional optical zone(FOZ)after small incision lenticule extraction(SMILE)versus femtosecond laser assisted excimer laser keratomileusis(FS-LASIK)for myopia correction and potential associated factors for FOZ.METHODS:A total of 133 patients who received corneal refractive surgery in our hospital between November 2018 and July 2021 were retrospectively enrolled.There were 63 patients(123 eyes)in SMILE group and 70patients(139 eyes)in FS-LASIK group.The size of FOZ was measured using Pentacam 3-dementional anterior segment analyzer before and 3mo after surgery,so as to analyze postoperative achieved functional optical zone(AFOZ)and its contributing parameters.RESULTS:When planned functional optical zone(PFOZ)was 6.5 mm for both groups,AFOZ was 1.45±0.27 and 1.67±0.25 mm smaller than preoperative FOZ in SMILE group and FS-LASIK group 3mo after surgery.AFOZ in SMILE group was significantly larger than that in FS-LASIK group(P<0.001).Variation of FOZ was negatively correlated with preoperative spherical equivalent(SE)and positively correlated with variation of mean keratometry value(△Km),variation of spherical aberration(△SA),and variation of Q-value(△Q,all P<0.001)in both groups.Multiple variable linear regression equations were△FOZ=1.354-0.1×pre-SE+0.336×△Q+1.462×△SA in SMILE group and△FOZ=1.512+0.137×△Q+0.468×△SA in FS-LASIK group.CONCLUSION:AFOZ is significantly smaller than preoperative FOZ in both SMILE and FS-LASIK groups.With the same PFOZ,larger AFOZ is achieved in SMILE group than in FS-LASIK group.

Optimization of enzyme assisted extraction of polysaccharides from Ganoderma lucidum

In the present work,an enzyme assisted extraction method is used to isolate crude polysaccharides from Ganoderma lucidum. The isolating effect was optimized with orthographic graph statistic method with three levels and four independent variables. Complex enzyme,extraction temperature,extraction time and extraction pH were combined to obtain the best possible combination to get maximum amount of extract and crude polysaccharides yield. The optimum extraction conditions were:complex enzyme amount of 3 %(w/v),extraction temperature at 45 ℃,extraction time of 3 h and extraction pH at 7. Under these conditions,the experimental amount of extract is 8.9 % and the yield of crude polysaccharides is 1.1 %,which are in close agreement with the value predicted by the model.

Microwave-assisted Extraction of Rutin and Quercetin from Flos Sophorae

Three microwave-assisted extraction(MAE) procedures were studied. The first procedure was household microwave oven dynamic extraction(HMODE). The second procedure was special microwave oven bath extraction(SMOBE). The third procedure was microwave resonant cavity dynamic extraction(MRCDE). The results obtained by the three microwave-assisted extraction procedures were compared with those obtained by using traditional Soxhlet extraction. The results indicate that the MAE not only took a shorter time, but also simplified the procedure, and made the extraction a higher yield. At the same time the results obtained by the three MAE procedures were also compared with each other.

Optimization of microwave-assisted extraction of bioactive alkaloids from lotus plumule using response surface methodology

In this work,a fast and efficient microwave-assisted extraction(MAE) method was developed to extract main bioactive alkaloids from lotus plumue.To optimize MAE conditions,three main factors were selected using univariate approach experiments,and then central composite design(CCD).The optimal extraction conditions were as follows:methanol concentration of 65%,microwave power of 200 W,and extraction time of 260 s.A high performance liquid chromatography–diode array detector(HPLC–DAD) method was established to quantitatively analyze these phytochemicals in different lotus plumule samples and in different part of lotus.Chromatographic separation was carried out on an Agilent Zorbax Extend-C_(18) column(4.6 mm×150 mm,3.5 μm).Gradient elution was applied with the mobile phase constituted with 0.1% triethylamine in water(A)and acetonitrile(B):40%-70% B at 0-8 min,70%-100% B at 8–9 min,100% B for 2 min,and then equilibrated with 40% B for 2 min.