Cemented backfilling technology with unclassified tailings based on vertical sand silo

A new technology characterized by rapidly non-mechanical settlement of unclassified tailings was developed based on a large number of tests, and dynamic settlement and continual slurry preparation without hardening in vertical sand silo were eventually realized by the addition of an effective flocculating agent (NPA). The results show that the sedimentation velocity of interface between unclassified tailings and water after the addition of NPA increases by 10-20 times, the sedimentation mass fraction of unclassified tailings at the bottom of vertical sand silo is up to 64%, the solid particle content of waste water meets the national standard, and the side influences of NPA can be removed by the addition of fly ash. The industrial test result shows that the system, the addition manner and the equipments are rational, and the vertical sand silo is used efficiently. This developed system is simple with large throughput, and the processing cost is 2.2 yuan(RMB)/m3, only 10%-20% of that by mechanical settlement.

Flocculated unclassified tailings settling efficiency improvement by particle collision optimization in the feedwell

Efficient thickening of tailings is a prerequisite for the metal mine tailings backfill and surface disposal operation.The effective collision of ultrafine tailings particles in suspension with flocculant molecules is essential for flocs aggregates formation and settling.Unreasonable feeding speed and flocculant adding method will lead to the failure of effective dispersion of flocculant and high particle content in thickener overflow.In this work,the effect of turbulence intensity and flocculant adding method on floc size,strength,and movement characteristics are analysed.Aiming to solve the turbidity increased,a pilot-scale continuous thickening test was carried out.Taking a single particle and multiple flocs of full tailings as the research object,the particle iterative settlement model of flocs was established.The influence of turbulence intensity on collision effect is studied by tracking and simulating particle trajectory.The results show that in the process of single particle settlement,chaos appears in the iterative process owing to particle adhesion which caused by micro action.When the turbulence intensity is 25.99%,the maximum particle size of tailings floc is 6.21 mm and the maximum sedimentation rate is 5.284 cm·s^(−1).The tailings floc presents a multi-scale structure of particle-force chain system when hindered settling,and the interweaving of strong and weak force chains constitutes the topological structure of particles.The results are applied to a thicker in plant,the flocculant addition mode and feed rate are optimized,and the flocs settling speed and overflow clarity are improved.

Early-age strength property improvement and stability analysis of unclassified tailing paste backfill materials

High-density tailings,small cementitious materials,and additives are used for backfill materials with poor early compressive strength(ECS),which may greatly affect the mining and backfill cycle,to prepare paste backfill materials(PBMs)with a high ECS.The effects and mechanisms of different early strength agents on the property of PBM are investigated.The action mechanism of additives on the properties of PBM is also analyzed through X-ray diffraction,scanning electron microscope,and energy dispersive spectrometry.Results show that the effects of single-component additives 1,3,and 6 are better than those of the other additives,and their optimal dosages are 3wt%,1wt%,and 3wt%,respectively.The optimum multicomponent combinations are 1wt%of additive 1 and 1.5wt%of additive 6.The ECS of the paste with additive 10 increases to a greater extent than that of the other pastes because of the synergistic action of additive 1 with additive 6.The hydration product of Ca(OH)2 is consumed,and more C-S-H gels are generated with the addition of additives to paste.Tailings particles,ettringite crystals,and gels intertwined with one another form a dense net-like structure that fills the pores.This structure can significantly improve the ECS of PBM.