Modeling electric vehicle's following behavior and numerical tests

The micro modeling for electric vehicle and its solution were investigated. A new car-following model for electric vehicle was proposed based on the existing car-following models. The impacts of the electric vehicle's charging electricity were studied from the numerical perspective. The numerical results show that the electric vehicle's charging electricity will destroy the stability of uniform flow and produce some prominent queues and these traffic phenomena are directly related to the initial headway, the distance between two adjacent charging stations and the number of charging stations. The above results can help traffic engineer to choose the position of charging station and the electric vehicle's driver to adjust his/her driving behavior in the traffic system with charging station.

Surface potential uniformity and sensitivity of large-area PTFE electret discs of different thicknesses produced by a modified corona poling rotating system for dosimetry applications

In this study,large-area(6-cm diameter)Teflon polytetrafluoroethylene(PTFE)discs of different thicknesses(0.2-,0.5-and 1-mm)were negatively and positively charged by using the“modified single point-to-plane corona poling rotating system”.The effects of some crucial parameters of the PTFE disc as well as the modified corona poling rotating system on the PTFE surface potential uniformity such as.(a)PTFE disc thickness,(b)PTFE disc polarity and(c)needle-to-PTFE disc distance were successfully reported.Accordingly,closer needle-to-PTFE disc distance,positive charging mode and thinner PTFE disc provided a better PTFE surface potential uniformity.However,the effects of PTFE charge polarity and needle distance on the electrostatic charge potential uniformity were much more remarkable in comparison with the effects of PTFE thickness.Additionally,the surface potential distribution profiles of charged PTFE discs were totally flat and independent of the PTFE thickness at 5-and 13-mm needle distances for the negative and positive charging modes,respectively.At the optimized charging conditions,large-area PTFE electret disc(0.5-mm-thick)with positive uniform surface charge potential especially at the edges up to
1.8 kV with stability up to 77 days studied was produced by applying a new multiple heat treatment protocol to the PTFE disc for radon dosimetry.As also observed in this study,the sensitivity of PTFE electret dosimeters to a defined radon gas concentration increases as the PTFE thickness increases.Meanwhile,0.5-mm-thick PTFE electret disc produced was selected to be used as a high quality electret dosimeter with acceptable and superior parameters for different applications in particular medium-term radiation dosimetry in both low and high dose rate ionizing radiation fields.