Praseodymium was selected as a promoter for SnO2/Ti electrode to improve the electrocatalytic performance by electrodeposition in pharmaceutical wastewater treatment; the micrograph and the structure were characterize...Praseodymium was selected as a promoter for SnO2/Ti electrode to improve the electrocatalytic performance by electrodeposition in pharmaceutical wastewater treatment; the micrograph and the structure were characterized by SEM and XRD. Mixture uniform design was used in the optimization of the electrolytic conditions; mathematical model was established according to the rate of wiping COD off, which revealed the relationship between the current intensity, time of electrolysis, the amount of doped Pr, and the ratio of area （SnOJTi：Al）. On the basis of the analysis of the empirical model, the optimized parameters had been obtained; the rate of wiping COD off was up to 94.9%, it decreased from 392 to 20 mg/L. Experimental results showed that the electrocatalytic performance of the electrode doped with Pr was superior for the treatment of pharmaceutical wastewater.展开更多
[Objectives]To study the effects of different material ratios on the dissolution of Tongmai pills.[Methods]Based on mixture uniform experiment design,the fiber,starch and grease-resin materials in Tongmai pills were p...[Objectives]To study the effects of different material ratios on the dissolution of Tongmai pills.[Methods]Based on mixture uniform experiment design,the fiber,starch and grease-resin materials in Tongmai pills were proportioned.The contents of strychnine,brucine,paeoniflorin,calycosin,ferulic acid,hesperidin and salvianolic acid B in the solution were determined by HPLC,and the content of total flavonoids was determined by ultraviolet spectrophotometry.The weight coefficient of index components was determined by analytic hierarchy process,and the SAS software was used to optimize the dissolution model and calculate the dissolution parameter T40.MATLAB was used to establish a mathematical model and realize the data visualization between material ratio and dissolution parameter T40.[Results]The mathematical model between material ratio and dissolution parameter was T40=8.93-5.31X1-5.83X2+17.67X1X3(X1,X2,X3 are fiber,starch and grease-resin materials respectively,r2=0.9706,P=0.01,RMSE=0.5696).[Conclusions]Fiber can effectively promote the dissolution(P<0.05).Starch can promote the dissolution,but the effect is not obvious(P=0.05).The interaction between fiber and grease-resin can inhibit the dissolution,but was not significant(P=0.07).展开更多
基金the Fund of the Natural Science of Guangxi (0731015)
文摘Praseodymium was selected as a promoter for SnO2/Ti electrode to improve the electrocatalytic performance by electrodeposition in pharmaceutical wastewater treatment; the micrograph and the structure were characterized by SEM and XRD. Mixture uniform design was used in the optimization of the electrolytic conditions; mathematical model was established according to the rate of wiping COD off, which revealed the relationship between the current intensity, time of electrolysis, the amount of doped Pr, and the ratio of area （SnOJTi：Al）. On the basis of the analysis of the empirical model, the optimized parameters had been obtained; the rate of wiping COD off was up to 94.9%, it decreased from 392 to 20 mg/L. Experimental results showed that the electrocatalytic performance of the electrode doped with Pr was superior for the treatment of pharmaceutical wastewater.
基金Supported by Science and Technology Research and Development Plan Project of Chengde City(201706A043)Hospital Pharmaceutical Research Project for Young Scholars of Hebei Pharmaceutical Association(2020-Hbsyxhqn0029)+2 种基金Development Plan Project of Science and Technology Department of Henan Province(142102310278)Special Project for Traditional Chinese Medicine Scientific Research of Henan Province(2014ZY01018)Key scientific research project of Education Department of Henan Province(13A350597).
文摘[Objectives]To study the effects of different material ratios on the dissolution of Tongmai pills.[Methods]Based on mixture uniform experiment design,the fiber,starch and grease-resin materials in Tongmai pills were proportioned.The contents of strychnine,brucine,paeoniflorin,calycosin,ferulic acid,hesperidin and salvianolic acid B in the solution were determined by HPLC,and the content of total flavonoids was determined by ultraviolet spectrophotometry.The weight coefficient of index components was determined by analytic hierarchy process,and the SAS software was used to optimize the dissolution model and calculate the dissolution parameter T40.MATLAB was used to establish a mathematical model and realize the data visualization between material ratio and dissolution parameter T40.[Results]The mathematical model between material ratio and dissolution parameter was T40=8.93-5.31X1-5.83X2+17.67X1X3(X1,X2,X3 are fiber,starch and grease-resin materials respectively,r2=0.9706,P=0.01,RMSE=0.5696).[Conclusions]Fiber can effectively promote the dissolution(P<0.05).Starch can promote the dissolution,but the effect is not obvious(P=0.05).The interaction between fiber and grease-resin can inhibit the dissolution,but was not significant(P=0.07).
