A landslide monitoring method using data from unmanned aerial vehicle and terrestrial laser scanning with insufficient and inaccurate ground control points

Non-contact remote sensing techniques,such as terrestrial laser scanning(TLS)and unmanned aerial vehicle(UAV)photogrammetry,have been globally applied for landslide monitoring in high and steep mountainous areas.These techniques acquire terrain data and enable ground deformation monitoring.However,practical application of these technologies still faces many difficulties due to complex terrain,limited access and dense vegetation.For instance,monitoring high and steep slopes can obstruct the TLS sightline,and the accuracy of the UAV model may be compromised by absence of ground control points(GCPs).This paper proposes a TLS-and UAV-based method for monitoring landslide deformation in high mountain valleys using traditional real-time kinematics(RTK)-based control points(RCPs),low-precision TLS-based control points(TCPs)and assumed control points(ACPs)to achieve high-precision surface deformation analysis under obstructed vision and impassable conditions.The effects of GCP accuracy,GCP quantity and automatic tie point(ATP)quantity on the accuracy of UAV modeling and surface deformation analysis were comprehensively analyzed.The results show that,the proposed method allows for the monitoring accuracy of landslides to exceed the accuracy of the GCPs themselves by adding additional low-accuracy GCPs.The proposed method was implemented for monitoring the Xinhua landslide in Baoxing County,China,and was validated against data from multiple sources.

Adaptive Sensor-Fault Tolerant Control of Unmanned Underwater Vehicles With Input Saturation

This paper investigates the tracking control problem for unmanned underwater vehicles(UUVs)systems with sensor faults,input saturation,and external disturbance caused by waves and ocean currents.An active sensor fault-tolerant control scheme is proposed.First,the developed method only requires the inertia matrix of the UUV,without other dynamic information,and can handle both additive and multiplicative sensor faults.Subsequently,an adaptive fault-tolerant controller is designed to achieve asymptotic tracking control of the UUV by employing robust integral of the sign of error feedback method.It is shown that the effect of sensor faults is online estimated and compensated by an adaptive estimator.With the proposed controller,the tracking error and estimation error can asymptotically converge to zero.Finally,simulation results are performed to demonstrate the effectiveness of the proposed method.

Guaranteed Cost Attitude Tracking Control for Uncertain Quadrotor Unmanned Aerial Vehicle Under Safety Constraints

In this paper,guaranteed cost attitude tracking con-trol for uncertain quadrotor unmanned aerial vehicle(QUAV)under safety constraints is studied.First,an augmented system is constructed by the tracking error system and reference system.This transformation aims to convert the tracking control prob-lem into a stabilization control problem.Then,control barrier function and disturbance attenuation function are designed to characterize the violations of safety constraints and tolerance of uncertain disturbances,and they are incorporated into the reward function as penalty items.Based on the modified reward function,the problem is simplified as the optimal regulation problem of the nominal augmented system,and a new Hamilton-Jacobi-Bellman equation is developed.Finally,critic-only rein-forcement learning algorithm with a concurrent learning tech-nique is employed to solve the Hamilton-Jacobi-Bellman equa-tion and obtain the optimal controller.The proposed algorithm can not only ensure the reward function within an upper bound in the presence of uncertain disturbances,but also enforce safety constraints.The performance of the algorithm is evaluated by the numerical simulation.

Experimental Study of a Modified Command Governor Adaptive Controller for Depth Control of an Unmanned Underwater Vehicle

Command governor–based adaptive control(CGAC)is a recent control strategy that has been explored as a possible candidate for the challenging task of precise maneuvering of unmanned underwater vehicles(UUVs)with parameter variations.CGAC is derived from standard model reference adaptive control(MRAC)by adding a command governor that guarantees acceptable transient performance without compromising stability and a command filter that improves the robustness against noise and time delay.Although simulation and experimental studies have shown substantial overall performance improvements of CGAC over MRAC for UUVs,it has also shown that the command filter leads to a marked reduction in initial tracking performance of CGAC.As a solution,this paper proposes the replacement of the command filter by a weight filter to improve the initial tracking performance without compromising robustness and the addition of a closed-loop state predictor to further improve the overall tracking performance.The new modified CGAC(M-CGAC)has been experimentally validated and the results indicate that it successfully mitigates the initial tracking performance reduction,significantly improves the overall tracking performance,uses less control force,and increases the robustness to noise and time delay.Thus,M-CGAC is a viable adaptive control algorithm for current and future UUV applications.

ADAPTIVE NEURAL NETWORK ATTITUDE CONTROL FOR UNMANNED HELICOPTER

Adaptive flight control technology, feedback linearization, model inversion theory are reviewed and the error dynamic characteristics are analyzed, and an adaptive on-line neural network attitude control system is presented. The model inversion is under the hover condition. And the adaptive control law based on the neural network is designed to guarantee the boundedness of tracking error and control signals. Simulation results demonstrate that the nonlinear neural network augmented model inversion can self-adapt to the uncertainty and modeling errors of unmanned helicopters. Results are compared while the parameters of PD controller and robustness items are changed.

Control System Design for an Unmanned Helicopter to Track a Ground Target

Due to potential wide applications,the problem of utilizing an unmanned helicopter to track a ground target has become one of the most active research directions in related areas.However,in most cases,it is possible for a dynamic target to implement evasive actions with strong maneuverability,such as a sudden turn during high-speed movement,to flee from the tracker,which then brings much difficulty for the design of tracking control systems.Currently,most research on this field focuses on utilizing a ground mobile robot to track a high-speed target.Unfortunately,it is very difficult to extend those developed methods to airborne applications due to much more complex dynamices of UAV-target relative motion.This study investiages thoroughly for the problem of using an unmanned helicopter to track a ground target,with particular emphasis on the avoidance of tracking failure caused by the evasive maneuvers of dynamic targets.Specifically,a novel control scheme,which consists of an innovative target tracking controller and a classical flight controller,is proposed for the helicopter-target tracking problem.Wherein,the tracking controller,whose design is the focus of the paper,aims to utilize the motion information of the helicopter and the dynamic target to construct a suitable trajectory for the helicopter,so that when it flies along this trajectory,the relative pose between the helicopter and the dynamic target will be kept consant.When designing the target tracking controller,a novel coordinate transformation is firstly introduced to convert the tracking system into a more compact form convenient for control law design,the desired velocities for the helicopter is then proposed with consideration of the dynamic constraint.The stability of the closed-loop system is finally analyzed by Lyapunov techniques.Based on Matlab/Simulink environment,two groups of simulation are conducted for the helicopter-target tracking control system where the target moves along a linear path and takes a sudden turn during high-speed movement,respectively.As shown by the simulation results,both the distance error and the pointing error are bounded during the tracking process,and they are convergent to zero when the target moves straightly.Moreover,the tracking performance can be adjusted properly to avoid tracking failure due to evasive maneuvers of the target,so as to guarantee superior tracking performance for all kinds of dynamic targets.

Quaternion-based Nonlinear Trajectory Tracking Control of a Quadrotor Unmanned Aerial Vehicle

At present, most controllers of quadrotor unmanned aerial vehicles（UAVs） use Euler angles to express attitude. These controllers suffer a singularity problem when the pitch angle is near 90°, which limits the maneuverability of the UAV. To overcome this problem, based on the quatemion attitude representation, a 6 degree of freedom（DOF） nonlinear controller of a quadrotor UAV is designed using the trajectory linearization control（TLC） method. The overall controller contains a position sub-controller and an attitude sub-controller. The two controllers regulate the translational and rotational motion of the UAV, respectively. The controller is improved by using the commanded value instead of the nominal value as the input of the inner control loop. The performance of controller is tested by simulation before and after the improvement, the results show that the improved controller is better. The proposed controller is also tested via numerical simulation and real flights and is compared with the traditional controller based on Euler angles. The test results confirm the feasibility and the robustness of the proposed nonlinear controller. The proposed controller can successfully solve the singularity problem that usually occurs in the current attitude control of UAV and it is easy to be realized.

Development of an Autonomous Flight Control System for Small Size Unmanned Helicopter Based on Dynamical Model

It is devoted to the development of an autonomous flight control system for small size unmanned helicopter based on dynamical model. At first, the mathematical model of a small size helicopter is described. After that simple but effective MTCV control algorithm was proposed. The whole flight control algorithm is composed of two parts: orientation controller based on the model for rotation dynamics and a robust position controller for a double integrator. The MTCV block is also used to achieve translation velocity control. To demonstrate the performance of the presented algorithm, simulation results and results achieved in real flight experiments were presented.

Nonlinear Intelligent Flight Control for Quadrotor Unmanned Helicopter

Quadrotor unmanned helicopter is a new popular research platform for unmanned aerial vehicle(UAV),thanks to its simple construction,vertical take-off and landing(VTOL)capability.Here a nonlinear intelligent flight control system is developed for quadrotor unmanned helicopter,including trajectory control loop composed of co-controller and state estimator,and attitude control loop composed of brain emotional learning(BEL)intelligent controller.BEL intelligent controller based on mammalian middle brain is characterized as self-learning capability,model-free and robustness.Simulation results of a small quadrotor unmanned helicopter show that the BEL intelligent controller-based flight control system has faster dynamical responses with higher precision than the traditional controller-based system.

Design and implementation of a leader-follower cooperative control system for unmanned helicopters

In this paper, we present a full scheme for the cooperative control of multiple unmanned aerial vehicle （UAV） helicopters. We adopt the leader-follower pattern to maintain a fixed geometrical formation while navigating the UAVs following certain trajectories. More specifically, the leader is commanded to fly on some predefined trajectories, and each follower is controlled to maintain its position in formation using the measurement of its inertial position and the information of the leader position and velocity, obtained through a wireless modem. More specifications are made for multiple UAV formation flight. In order to avoid possible collisions of UAV helicopters in the actual formation flight test, a collision avoidance scheme based on some predefined alert zones and protected zones is employed. Simulations and experimental results are presented to verify our design.

Automatic Carrier Landing Control for Unmanned Aerial Vehicles Based on Preview Control

For carrier-based unmanned aerial vehicles(UAVs),one of the important problems is the design of an automatic carrier landing system(ACLS)that would enable the UAVs to accomplish autolanding on the aircraft carrier.However,due to the movements of the flight deck with six degree-of-freedom,the autolanding becomes sophisticated.To solve this problem,an accurate and effective ACLS is developed,which is composed of an optimal preview control based flight control system and a Kalman filter based deck motion predictor.The preview control fuses the future information of the reference glide slope to improve landing precision.The reference glide slope is normally a straight line.However,the deck motion will change the position of the ideal landing point,and tracking the ideal straight glide slope may cause landing failure.Therefore,the predictive deck motion information from the deck motion predictor is used to correct the reference glide slope,which decreases the dispersion around the desired landing point.Finally,simulations are carried out to verify the performance of the designed ACLS based on a nonlinear UAV model.

Flight Control System of Unmanned Aerial Vehicle

To date unmanned aerial system(UAS)technologies have attracted more and more attention from countries in the world.Unmanned aerial vehicles(UAVs)play an important role in reconnaissance,surveillance,and target tracking within military and civil fields.Here one briefly introduces the development of UAVs,and reviews its various subsystems including autopilot,ground station,mission planning and management subsystem,navigation system and so on.Furthermore,an overview is provided for advanced design methods of UAVs control system,including the linear feedback control,adaptive and nonlinear control,and intelligent control techniques.Finally,the future of UAVs flight control techniques is forecasted.

Circular Formation Flight Control for Unmanned Aerial Vehicles With Directed Network and External Disturbance

This paper proposes a new distributed formation flight protocol for unmanned aerial vehicles(UAVs)to perform coordinated circular tracking around a set of circles on a target sphere.Different from the previous results limited in bidirectional networks and disturbance-free motions,this paper handles the circular formation flight control problem with both directed network and spatiotemporal disturbance with the knowledge of its upper bound.Distinguishing from the design of a common Lyapunov fiunction for bidirectional cases,we separately design the control for the circular tracking subsystem and the formation keeping subsystem with the circular tracking error as input.Then the whole control system is regarded as a cascade connection of these two subsystems,which is proved to be stable by input-tostate stability(ISS)theory.For the purpose of encountering the external disturbance,the backstepping technology is introduced to design the control inputs of each UAV pointing to North and Down along the special sphere(say,the circular tracking control algorithm)with the help of the switching function.Meanwhile,the distributed linear consensus protocol integrated with anther switching anti-interference item is developed to construct the control input of each UAV pointing to east along the special sphere(say,the formation keeping control law)for formation keeping.The validity of the proposed control law is proved both in the rigorous theory and through numerical simulations.

Type-2 Fuzzy Control for Driving State and Behavioral Decisions of Unmanned Vehicle

In this paper, interval type-2 fuzzy sets, fuzzy comprehensive evaluation and the fuzzy control rules are synthesized to realize the control of unmanned vehicle in driving state and behavioral decisions. Compared to the type-1 fuzzy set, type-2 fuzzy sets have more advantages in handling the model based on uncertainties, linguistic information because the membership functions are fuzzy sets. Different membership functions are established for each factor when the unmanned vehicle is driving at different speed intervals. In addition, a new evaluation method is developed to analyze unmanned vehicle’s driving state. Finally, a set of dynamic fuzzy rules are sorted out, which can be applied to the unmanned vehicle’s behavioral decision-making and provide a new idea to related research.

Trajectory Tracking of Vertical Take-off and Landing Unmanned Aerial Vehicles Based on Disturbance Rejection Control

We investigate the trajectory tracking problem of vertical take-off and landing (VTOL) unmanned aerial vehicles (UAV), and propose a practical disturbance rejection control strategy. Firstly, the nonlinear error model is established completely by the modified Rodrigues parameters, while considering dynamics of the servo actuators. Then, a hierarchical control scheme is applied to design the translational and rotational controllers based on the time-scale property of each subsystem, respectively. And the linear extended state observer and auxiliary observer are used to deal with the uncertainties and saturation. At last, global stability of the closed-loop system is analyzed based on the singular perturbation theory. Simulation results show the effectiveness of the proposed control strategy. © 2014 Chinese Association of Automation.

Unmanned Aerial Vehicles:Control Methods and Future Challenges

With the rapid development of computer technology,automatic control technology and communication technology,research on unmanned aerial vehicles(UAVs)has attracted extensive attention from all over the world during the last decades.Particularly due to the demand of various civil applications,the conceptual design of UAV and autonomous flight control technology have been promoted and developed mutually.This paper is devoted to providing a brief review of the UAV control issues,including motion equations,various classical and advanced control approaches.The basic ideas,applicable conditions,advantages and disadvantages of these control approaches are illustrated and discussed.Some challenging topics and future research directions are raised.

Trajectory planning and tracking control for underactuated unmanned surface vessels

The trajectory planning and tracking control for an underactuated unmanned surface vessel(USV) were addressed.The reference trajectory was generated by a virtual USV,and the error equation of trajectory tracking for underactuated USV was obtained,which transformed the tracking and stabilization problem of underactuated USV into the stabilization problem of the trajectory tracking error equation.A nonlinear state feedback controller was proposed based on backstepping technique and Lyapunov's direct method.By means of Lyapunov analysis,it is proved that the proposed controller ensures that the solutions of closed loop system have the ultimate boundedness property.Numerical simulation results are presented to validate the effectiveness and robustness of the proposed controller.

Bottom-following control for an underactuated unmanned undersea vehicle using integral-terminal sliding mode control

The bottom-following problem of an underactuated unmanned undersea vehicle(UUV) is addressed. A robust nonlinear controller is developed by using integral-terminal sliding mode control(ITSMC), which can exponentially drive an UUV onto a predefined path at a constant forward speed. The kinematic error equations are first derived in the Serret-Frenet frame. Using the line of sight(LOS) method, Lyapunov's direct technique and tracking differentiator, the guidance law is established. Then, the kinematic controller, the guidance law, is expanded to cope with vehicle dynamics by resorting to introduce two integral-terminal sliding surfaces. Robustness to parameter perturbation is addressed by incorporating the reaching laws associated with the upper bound of the parameter perturbation. The proposed control law can guarantee that all error signals globally exponentially converge to the origin. Finally, a series of numerical simulation results are presented and discussed. In these simulations, wave, constant unknown ocean currents(for the purposes of the controller) and the parameter perturbation are added to illustrate the robustness and effectiveness of the bottom-following control scheme.

Analysis of unmanned aerial vehicle navigation and height control system based on GPS

According to the characteristic of global positioning system（GPS） reflection signals,a GPS delay mapping receiver system scheme is put forward,which not only satisfies the unmanned aerial vehicle（UAV） guidance localization but also realizes height measurement.A code delay algorithm is put forward,which processes the direct and land reflected signal and outputs the navigation data and specular point.The GPS terrain reflected echo signal mathematical equation is inferred.The reflecting signal area,when the GPS signal passes the land,is analyzed.The height survey model reflected land surface characteristic is established.A simulation system which carries guidance localization of the UAV and the height measuring control through the GPS direct signal and the land reflected signal is designed,taken the GPS satellite as the illumination source,the receiver is put on the UAV.Then the UAV guidance signal,the GPS reflection signal and receiver＇s parallel processing are realized.The parallel processing reduces UAV＇s payload and raises system＇s operating efficiency.The simulation results confirms the validity of the model and also provides the basis for the UAV＇s optimization design.

Robust Adaptive Control Design for Rotorcraft Unmanned Aerial Vehicles Based on Sliding Mode Approach

This paper presents a nonlinear robust control design method for a generic rotorcraft unmanned aerial vehicle(RUAV). The control objective is to let the RUAV track some pre-defined time-varying position and heading trajectories. The proposed controller employs feedback linearization process to realize the dynamic decoupling control and applies adaptive sliding mode control to compensate for the parametric uncertainties and external disturbances. The global asymptotical stability is proved via stability analysis. Compared with the cascaded controller, the proposed controller demonstrates a superior tracking performance and robustness through numerical simulation in the presence of parametric uncertainties and unknown disturbances.