The nano-TiO2/unsaturated polyester resin (referred to as nano-TiO2/UPR hereafter) was prepared with the 'reaction method', by which a chemical bond generated between nano-TiO2 and UP was inserted in the UP lo...The nano-TiO2/unsaturated polyester resin (referred to as nano-TiO2/UPR hereafter) was prepared with the 'reaction method', by which a chemical bond generated between nano-TiO2 and UP was inserted in the UP long chain. The performance of the nano-TiO2/UPR was determined by such a new structure. The research results showed that the reactivity of nano-TiO2/UPR is higher than that of UPR. The impact strength and bending strength of nano-TiO2/UPR are greatly enhanced as compared with that of UPR. Thermal resistance and dielectric property of nano-TiO2/UPR are the same as that of UPR.展开更多
Five SO4^2-/TiO2-MXOY solid super acids(SSA:Cu@Ti:SSA,Zr@Ti:SSA,Fe@Ti:SSA,Mn@Ti:SSA,Mo@Ti:SSA)were successfully prepared by sol-gel method,and its chemical structure and element content were characterized by X-ray dif...Five SO4^2-/TiO2-MXOY solid super acids(SSA:Cu@Ti:SSA,Zr@Ti:SSA,Fe@Ti:SSA,Mn@Ti:SSA,Mo@Ti:SSA)were successfully prepared by sol-gel method,and its chemical structure and element content were characterized by X-ray diffraction(XRD)analysis,Fourier transform infrared spectroscopy(FHIR)and energy dispersive spectroscopy(EDS).Then,a compound flame retardant system containing SSA and ammonium polyphosphate/montmorillonite(AM)were was introduced into an unsaturated polyester resin(UPR)to enhance the flame retardance.The effect of SSA on the flammability and thermal stability of the UPR was evaluated by the limiting oxygen index(LOI),cone calorimeter te st(CCT)and thermogravimetric analysis(TGA).The LOI results showed that the flame retardance of the UPR composites was significantly improved with the addition of SSA.Moreover,their heat release rate(HRR),total heat release(THR),the smoke production rate(SPR)and CO and CO2 yield were much decreased.In addition,the initial decomposition temperature of UPR/AM/S SA was delayed,indicating that their thermal stability was increased,and the residual char of UPR/AM/SSA was also increa sed due to strong catalytic of SSA ability for esterification and dehydration.Furthermore,the microstructure of the residual char after combustion of the UPR composites was studied by the scanning electron microscopy(SEM),and it was found that the char layer structure was more continuous and dense after the addition of the SSA.In sum up,the synergistic effect between SSA and AM was the main factor for the great improvement of flame retardant of UPR composites.展开更多
纳米 Ti O2 改性不饱和聚酯树脂 ,其目的是对不饱和聚酯进行同时增韧增强改性。用“反应法”制备的纳米 Ti O2 /UPR,在纳米 Ti O2 与 UPR之间产生的新化学键将纳米 Ti O2 粒子接入 UPR长链上 ,这种新的结构决定了纳米 Ti O2 /UPR的性能...纳米 Ti O2 改性不饱和聚酯树脂 ,其目的是对不饱和聚酯进行同时增韧增强改性。用“反应法”制备的纳米 Ti O2 /UPR,在纳米 Ti O2 与 UPR之间产生的新化学键将纳米 Ti O2 粒子接入 UPR长链上 ,这种新的结构决定了纳米 Ti O2 /UPR的性能。研究结果表明 ,纳米 Ti O2 /UPR的反应活性高于 UPR,纳米 Ti O2 /UPR的冲击韧性和弯曲强度较 UPR分别提高 46%和 5 5 % ,纳米 Ti O2 /UPR的耐热性及介电性与展开更多
Nano-silica treated with different kinds of coupling agent （KH550, A-143, A-151） was used to modify the surface condition of glass fiber, and then, the modified glass fiber/unsaturated polyester resin （UPR） compos...Nano-silica treated with different kinds of coupling agent （KH550, A-143, A-151） was used to modify the surface condition of glass fiber, and then, the modified glass fiber/unsaturated polyester resin （UPR） composites materials were prepared. Scanning electron microscopy （SEM）, dynamic mechanical analysis （DMA）, and impact test were used to characterize the composite materials＇ structure and properties. The morphology of composite materials shows that the adhesion between nano-silica and glass fiber is improved when silane coupling agent is added in. The DMA and impact test results show that silane coupling agent （especially KH550 and A-151） could effectively improve the composite＇s mechanical properties. When the dose of KH550 was 0.1% （m ： m）, the storage modulus and impact strength reached the maximum.展开更多
Curing behaviors of the unsaturated polyester resin （UPR） containing 1-1.8 wt% methyl ethyl ketone peroxide （MEKP） initia- tor are investigated. The viscosity, gelation and vitrification transition of the UPR-MEKP...Curing behaviors of the unsaturated polyester resin （UPR） containing 1-1.8 wt% methyl ethyl ketone peroxide （MEKP） initia- tor are investigated. The viscosity, gelation and vitrification transition of the UPR-MEKP systems are examined using the ro- tating viscometer and differential scanning calorimetry （DSC）. A liquid fragility parameter, Me, defined as the viscosity varia- tion rate of the liquids towards the curing temperature is presented. It is found that Mc has a good negative relation with the glass transition temperature （Tg） in the systems. Mc can be used for predicting the stability of the cured amorphous systems. The relationship between the liquid and cured thermoset polymer systems is studied from both the thermodynamic and kinetic point of view.展开更多
文摘The nano-TiO2/unsaturated polyester resin (referred to as nano-TiO2/UPR hereafter) was prepared with the 'reaction method', by which a chemical bond generated between nano-TiO2 and UP was inserted in the UP long chain. The performance of the nano-TiO2/UPR was determined by such a new structure. The research results showed that the reactivity of nano-TiO2/UPR is higher than that of UPR. The impact strength and bending strength of nano-TiO2/UPR are greatly enhanced as compared with that of UPR. Thermal resistance and dielectric property of nano-TiO2/UPR are the same as that of UPR.
基金Supported by the National Natural Science Foundation of China(51803057)Hebei Province Science Foundation for Youths(E2019508144)Fundamental Research Funds for the Central Universities(3142017099)。
文摘Five SO4^2-/TiO2-MXOY solid super acids(SSA:Cu@Ti:SSA,Zr@Ti:SSA,Fe@Ti:SSA,Mn@Ti:SSA,Mo@Ti:SSA)were successfully prepared by sol-gel method,and its chemical structure and element content were characterized by X-ray diffraction(XRD)analysis,Fourier transform infrared spectroscopy(FHIR)and energy dispersive spectroscopy(EDS).Then,a compound flame retardant system containing SSA and ammonium polyphosphate/montmorillonite(AM)were was introduced into an unsaturated polyester resin(UPR)to enhance the flame retardance.The effect of SSA on the flammability and thermal stability of the UPR was evaluated by the limiting oxygen index(LOI),cone calorimeter te st(CCT)and thermogravimetric analysis(TGA).The LOI results showed that the flame retardance of the UPR composites was significantly improved with the addition of SSA.Moreover,their heat release rate(HRR),total heat release(THR),the smoke production rate(SPR)and CO and CO2 yield were much decreased.In addition,the initial decomposition temperature of UPR/AM/S SA was delayed,indicating that their thermal stability was increased,and the residual char of UPR/AM/SSA was also increa sed due to strong catalytic of SSA ability for esterification and dehydration.Furthermore,the microstructure of the residual char after combustion of the UPR composites was studied by the scanning electron microscopy(SEM),and it was found that the char layer structure was more continuous and dense after the addition of the SSA.In sum up,the synergistic effect between SSA and AM was the main factor for the great improvement of flame retardant of UPR composites.
文摘纳米 Ti O2 改性不饱和聚酯树脂 ,其目的是对不饱和聚酯进行同时增韧增强改性。用“反应法”制备的纳米 Ti O2 /UPR,在纳米 Ti O2 与 UPR之间产生的新化学键将纳米 Ti O2 粒子接入 UPR长链上 ,这种新的结构决定了纳米 Ti O2 /UPR的性能。研究结果表明 ,纳米 Ti O2 /UPR的反应活性高于 UPR,纳米 Ti O2 /UPR的冲击韧性和弯曲强度较 UPR分别提高 46%和 5 5 % ,纳米 Ti O2 /UPR的耐热性及介电性与
基金Supported by the National Natural Science Foundation of of China(J1210061)
文摘Nano-silica treated with different kinds of coupling agent （KH550, A-143, A-151） was used to modify the surface condition of glass fiber, and then, the modified glass fiber/unsaturated polyester resin （UPR） composites materials were prepared. Scanning electron microscopy （SEM）, dynamic mechanical analysis （DMA）, and impact test were used to characterize the composite materials＇ structure and properties. The morphology of composite materials shows that the adhesion between nano-silica and glass fiber is improved when silane coupling agent is added in. The DMA and impact test results show that silane coupling agent （especially KH550 and A-151） could effectively improve the composite＇s mechanical properties. When the dose of KH550 was 0.1% （m ： m）, the storage modulus and impact strength reached the maximum.
基金the financial support from the National Natural Science Foundation of China ( 50831003)
文摘Curing behaviors of the unsaturated polyester resin （UPR） containing 1-1.8 wt% methyl ethyl ketone peroxide （MEKP） initia- tor are investigated. The viscosity, gelation and vitrification transition of the UPR-MEKP systems are examined using the ro- tating viscometer and differential scanning calorimetry （DSC）. A liquid fragility parameter, Me, defined as the viscosity varia- tion rate of the liquids towards the curing temperature is presented. It is found that Mc has a good negative relation with the glass transition temperature （Tg） in the systems. Mc can be used for predicting the stability of the cured amorphous systems. The relationship between the liquid and cured thermoset polymer systems is studied from both the thermodynamic and kinetic point of view.
