A model and simulation of cathode flooding and drying on unsteady proton exchange membrane fuel cell

A water balance has a significant impact on the overall system performance in proton exchange membrane fuel cell.An actual fuel cell application has a dynamic electrical load which means also dynamic electrical current.Therefore,since this electrical current is known,the water production from the fuel cell reaction is also able to be predicted.As long as the fuel cell water transportation model is provided,the present liquid water inside the porous medium is also able to be modeled.A model of the liquid water saturation level in a fuel cell in unsteady load condition was proposed.This model is a series of the water transportation model of water saturation level for the final output of proton exchange membrane(PEM) fuel cell to predict the flooding or drying of PEM fuel cell.The simulation of vehicle fuel cell in different dynamic load profiles and different inlet air conditions was done using this model.The simulation result shows that PEM fuel cell with different dynamic load profiles has different liquid water saturation level profiles.This means that a dynamic load fuel cell requires also a dynamic input air humidification.

Unsteady Internal Flow Conditions of Mini-Centrifugal Pump with Splitter Blades

Mini centrifugal pumps having a diameter smaller than lOOmm are employed in many fields. But the design method for the mini centrifugal pump is not established because the internal flow condition for these small-sized fluid machines is not clarified and conventional theory is not suitable for small-sized pumps. Therefore, mini cen- trifugal pumps with simple structure were investigated by this research. Splitter blades were adopted in this re- search to improve the performance and the internal flow condition of mini centrifugal pump which had large blade outlet angle. The original impeller without the splitter blades and the impeller with the splitter blades were prepared for experiment. The performance tests are conducted with these rotors in order to investigate the effect of the splitter blades on performance and internal flow condition of mini centrifugal pump. On the other hand, a three dimensional unsteady numerical flow analysis was conducted to investigate the change of the internal flow according to the rotor rotation. It is clarified from the experimental results that the performance of the mini cen- trifugal pump is improved by the splitter blades. The blade-to-blade low velocity region was suppressed in the case with the splitter blades. In addition to that, the unsteady flows near the volute casing tongue were suppressed due to the splitter blades. In the present paper, the performance of the mini centrifugal pump is shown and the un- steady flow condition is clarified with the results of the numerical flow analysis. Furthermore, the effects of the splitter blades on the performance and the unsteady internal flow condition are investigated.

Unsteady Flow Condition of Contra-Rotating Small-Sized Axial Fan

Small-sized axial fans are used as air cooler for electric equipments.But there is a strong demand for higher power of fans according to the increase of quantity of heat from electric devices.Therefore,higher rotational speed design is conducted,although,it causes the deterioration of efficiency and the increase of noise.Then,the adoption of contra-rotating rotors for the small-sized axial fan is proposed for the improvement of performance.In the case of contra-rotating rotors,it is necessary to design the rotor considering the unsteady flow condition of each front and rear rotor.In the present paper,the fan performance of the contra-rotating small-sized axial fan with 100mm diameter at a designed and a partial flow rates is shown,and the unsteady flow conditions at the inlet and the outlet of each front and rear rotor are clarified with unsteady numerical results.Furthermore,the relation between the performance and the unsteady flow condition of the contra-rotating small-sized axial fan is discussed and the methods to improve the performance are considered.

Gust response of an elasto-flexible morphing wing using fluid–structure interaction simulations

Small and micro unmanned aircraft are the focus of scientific interest due to their wide range of applications.They often operate in a highly unstable flight environment where the application of new morphing wing technologies offers the opportunity to improve flight characteristics.The investigated concept comprises port and starboard adjustable wings,and an adaptive elastoflexible membrane serves as the lifting surface.The focus is on the benefits of the deforming membrane during the impact of a one-minus-cosine type gust.At a low Reynolds number of Re=264000,the morphing wing model is investigated numerically by unsteady fluid-structure interaction simulations.First,the numerical results are validated by experimental data from force and moment,flow field,and deformation measurements.Second,with the rigid wing as the baseline,the flexible case is investigated,focusing on the advantages of the elastic membrane.For all configurations studied,the maximum amplitude of the lift coefficient under gust load shows good agreement between the experimental and numerical results.During the decay of the gust,they differ more the higher the aspect ratio of the wing.When considering the flow field,the main differences are due to the separation behavior on the upper side of the wing.The flow reattaches earlier in the experiments than in the simulations,which explains the higher lift values observed in the former.Only at one intermediate configuration does the lift amplitude of the rigid configuration exceeds that of the flexible by about 12%,with the elastic membrane resulting in a smaller and more uniform peak load,which is also evident in the wing loading and hence in the root bending moment.

Numerical Simulation of Dual-Phase-Lag Model and Inverse Fractional Single-Phase-Lag Problem for the Non-Fourier Heat Conduction in a Straight Fin

In recent years,many studies have been done on heat transfer in the fin under unsteady boundary conditions using Fourier and non-Fourier models.In this paper,unsteady non-Fourier heat transfer in a straight fin having an internal heat source under periodic temperature at the base was investigated by solving numerically Dual-Phase-Lag and Fractional Single-Phase-Lag models.In this way,the governing equations of these models were presented for heat conduction analysis in the fin,and their results of the temperature distribution were validated using the theoretical results of Single and Dual-Phase-Lag models.After that,for the first time the order of fractional derivation and heat flux relaxation time of the fractional model were obtained for the straight fin problem under periodic temperature at the base using Levenberg-Marquardt parameter estimation method.To solve the inverse fractional heat conduction problem,the numerical results of Dual-Phase-Lag model were used as the inputs.The results obtained from Fractional Single-Phase-Lag model could predict the fin temperature distribution at unsteady boundary condition at the base as well as the Dual-Phase-Lag model could.

Influence of the Type of the Pulverized Coal Concentrator on the Operation of a Tangential Fired Boiler with Horizontal Bias Combustion

In this paper, the problems of combustion instability and high-temperature corrosion of pulverized coal fired boiler are investigated by numerical simulation and analysis of the momentum moment. Elbow and twisting plate type of burners are used in the boiler, and the reverse moment of momentum is formed at the outlet of the fuel-rich side of the burner. The momentum moment in the boiler is opposite to the designed tangential circle, and the tangential circle in the boiler is reversed rotation. The reverse moment of momentum at the burner outlet can be eliminated by using louver horizontal bias pulverized coal burner, while the problems of combustion instability and high-temperature corrosion of the boiler are solved, and the combustion efficiency is improved. Accordingly,economic benefit is obviously got.