Seismic performance evaluation of steel frame-steel plate shear walls system based on the capacity spectrum method

This paper presents some methods that the standard acceleration design response spectra derived from the present China code for seismic design of buildings are transformed into the seismic demand spectra, and that the base shear force-roof displacement curve of structure is converted to the capacity spectrum of an equivalent single-degree-of-freedom （SDOF） system. The capacity spectrum method （CSM） is programmed by means of MATLABT.0 computer language. A dual lateral force resisting system of 10-story steel frame-steel plate shear walls （SPSW） is designed according to the corresponding China design codes. The base shear force-roof displacement curve of structure subjected to the monotonic increasing lateral inverse triangular load is obtained by applying the equivalent strip model to stimulate SPSW and by using the finite element analysis software SAP2000 to make Pushover analysis. The seismic performance of this dual system subjected to three different conditions, i.e. the 8-intensity frequently occurred earthquake, fortification earthquake and seldom occurred earthquake, is evaluated by CSM program. The excessive safety of steel frame-SPSW system designed according to the present China design codes is pointed out and a new design method is suggested.

Analysis and seismic tests of composite shear walls with CFST columns and steel plate deep beams

A composite shear wall concept based on concrete filled steel tube （CFST） columns and steel plate （SP） deep beams is proposed and examined in this study. The new wall is composed of three different energy dissipation elements： CFST columns; SP deep beams; and reinforced concrete （RC） strips. The RC strips are intended to allow the core structural elements - the CFST columns and SP deep beams - to work as a single structure to consume energy. Six specimens of different configurations were tested under cyclic loading. The resulting data are analyzed herein. In addition, numerical simulations of the stress and damage processes for each specimen were carried out, and simulations were completed for a range of location and span-height ratio variations for the SP beams. The simulations show good agreement with the test results. The core structure exhibits a ductile yielding mechanism characteristic of strong column-weak beam structures, hysteretic curves are plump and the composite shear wall exhibits several seismic defense lines. The deformation of the shear wall specimens with encased CFST column and SP deep beam design appears to be closer to that of entire shear walls. Establishing optimal design parameters for the configuration of SP deep beams is pivotal to the best seismic behavior of the wall. The new composite shear wall is therefore suitable for use in the seismic design of building structures.

Lateral load-carrying capacity analyses of composite shear walls with double steel plates and filled concrete with binding bars

A method is developed to predict the lateral load-carrying capacity of composite shear walls with double steel plates and filled concrete with binding bars(SCBs). Nonlinear finite element models of SCBs were established by using the finite element tool, Abaqus. Tie constraints were used to connect the binding bars and the steel plates. Surface-to-surface contact provided by the Abaqus was used to simulate the interaction between the steel plate and the core concrete. The established models could predict the lateral load-carrying capacity of SCBs with a reasonable degree of accuracy. A calculation method was developed by superposition principle to predict the lateral load-carrying capacity of SCBs for the engineering application. The concrete confined by steel plates and binding bars is under multi-axial compression; therefore, its shear strength was calculated by using the Guo-Wang concrete failure criterion. The shear strength of the steel plates of SCBs was calculated by using the von Mises yielding criterion without considering buckling. Results of the developed method are in good agreement with the testing and finite element results.

Improving behavior of semi-supported steel plate shear walls

In spite of the good performance of the steel plate shear wall(SPSW)in recent earthquakes and experimental studies,the need for huge columns to surround the infill plate is a major shortcoming of the system.This shortcoming can be resolved by using semi-supported SPSW.The semi-supported SPSW has secondary columns that prevent the transfer of stress from the infill plate to the main columns.In spite of extensive experimental and numerical investigations on SPSWs,there are many ambiguities regarding the behavior of the semi-supported SPSW.Although stress in the columns is reduced,incomplete diagonal tension field action is formed in the infill plate that creates new problems.In this paper,a new type of semi-supported SPSW is presented in which the steel plate and the secondary columns are angled.The creation of the angle of the plate and the secondary column makes it possible to use the full capacity of the steel plate as well as the capacity of the secondary columns.Numerical results showed that the wall with a 60°angle has a favorable performance relative to the semi-supported wall.Moreover,with the 60°angle,stiffness,strength and energy absorption is increased.The angle of the secondary columns has little effect on the non-elastic stiffness.Nevertheless,using a wall with an angle of more than 90°can neutralize the wall’s behavior relative to conventional walls.Therefore,the wall with a 60°angle as an optimal angle is recommended.

Study on the Structural Performance of Steel Plate Shear Wall with Slits on Both Sides

This paper presents a new type of two sides slotted steel plate shear wall, and carries on the analysis to the finite element elastic buckling, respectively discusses the critical buckling load and the buckling mode. For the steel plate shear wall without stiffening ribs on both sides, the paper given the buckling coefficient formula, and give design proposal and reference value of steel plate shear wall with stiffened on both sides.

Experimental and analytical study on seismic behavior of steel-concrete multienergy dissipation composite shear walls

In this paper, a steel-concrete multi-energy dissipation composite shear wall, comprised of steel-reinforced concrete （SRC） columns, steel plate （SP） deep beams, a concrete wall and energy dissipation strips, is proposed. In order to study the multi-energy dissipation behavior and restorability after an earthquake, two stages of low cyclic loading tests were carded out on ten test specimens. In the first stage, test on five specimens with different number of SP deep beams was carried out, and the test lasted until the displacement drift reached 2%. In the second stage, thin SPs were welded to both sides of the five specimens tested in the first stage, and the same test was carried out on the repaired specimens （designated as new specimens）. The load-bearing capacity, stiffness, ductility, hysteretic behavior and failure characteristics were analyzed for both stages and the results are discussed herein. Extrapolating from these results, strength calculation models and formulas are proposed herein and simulations using ABAQUS carried out, they show good agreement with the test results. The study demonstrates that SRC columns, SP deep beams, concrete wall and energy dissipation strips cooperate well and play an important role in energy dissipation. In addition, this study shows that the shear wall has good recoverability after an earthquake, and that the welding of thin SP＇s to repair a deformed wall is a practicable technique.

Numerical modeling of seismic behavior of ellipse and peanut-shaped auxetic steel plate shear walls

This study proposes a new auxetic-shaped steel plate shear walls(simply referred to as ASSPSWs)consisting of boundary members and built-in perforated infill plates.The connection type between the boundary members is a hinge joint.The hole forms on the infill plates include orthogonal ellipse-shaped(ASSPSW-OE)and orthogonal peanutshaped(ASSPSW-OP).This paper studied the hysteretic performance of two steel plate shear walls’types based on the finite element analysis method.Within the study context,a parametric analysis was carried out to investigate the influence of various factors,such as hole size and hole distance,on the seismic performance of steel plate shear walls(SPSWs).The results indicated that reducing the the ratio of the ligament thickness to ellipse major axis(t/D)in orthogonal ellipse-shaped SPSWs can effectively increase the porosity while reducing the bearing and energy dissipation capacities.Under the condition with the t/D unchanged,increasing the ratio of the major to minor axis of the ellipse(d/D)raises the porosity and does not significantly reduce the bearing capacity and energy dissipation capacity of the SPSWs.For orthogonal peanut-shaped SPSWs,the holes’geometrical parameters significantly influence the hysteretic performance.Particularly,with the increase in the radial ratio of large to small circles in a peanut-shaped hole(R/r),the spacing between cells decreases.When drift exceeds 2%,the equivalent viscous damping ratio decreases sharply.Unlike the orthogonal ellipse-shaped SPSWs,changing the arrangement angle of peanut-shaped cells has no significant effect on orthogonal peanut-shaped SPSWs.However,the larger the angle,the greater the out-of-plane buckling of orthogonal ellipse-shaped SPSWs;thus,the energy dissipation capacity is reduced.The similarities lie in that the larger cell arrangement angle will make the steel plates have a complete stress field,and the bearing capacity will be slightly improved.When the cell arrangement angle(θ)is 45°,the SPSWs can develop high initial stiffness.

焊接多腔双钢板-混凝土组合剪力墙抗震性能分析

大多数双钢板-混凝土组合剪力墙采用螺栓连接或焊接肋的方式使钢板和混凝土协同工作。然而,这种连接方式可能导致整体性和塑性变形效率较低,且制作复杂,焊接多腔双钢板-混凝土组合剪力墙能够有效地避免这些问题。为了深入研究焊接多腔双钢板-混凝土组合剪力墙的抗震性能,基于约束混凝土真三轴塑性-损伤本构模型和钢材弹塑性混合强化-韧性损伤本构模型,建立了组合剪力墙的精细化三维实体-壳模型,将模拟所得的滞回曲线、骨架曲线、刚度退化曲线、弹性刚度、承载力、累积耗能、等效阻尼粘滞系数和延性系数与已有拟静力试验结果相比较,发现两者吻合较好。分析结果表明:轴压比对组合剪力墙模型算例刚度和承载力的影响较小,而随剪跨比增大,组合剪力墙模型算例的刚度和承载力呈线性降低;轴压比对组合剪力墙模型算例总塑性耗能的影响较小,而剪跨比的影响较大,剪力墙总塑性耗能随剪跨比增大而降低;轴压比和剪跨比都不会改变算例各部件的耗能分配机制,即组合剪力墙模型算例以外钢板和内隔板耗能为主。

联肢弯剪型钢板剪力墙抗震性能试验研究

联肢钢板剪力墙结构是将2片钢板剪力墙通过钢连梁连接形成的抗侧力结构。通过对1榀1/3缩尺的4层联肢弯剪型钢板剪力墙试件进行低周往复加载试验,从滞回曲线、骨架曲线、延性、承载力及刚度退化、耗能能力等方面研究了该结构体系的抗震性能,并且对试件的屈服顺序和变形模式进行了分析。结果表明:联肢钢板剪力墙试件的延性系数达到5.03,承载力退化系数均大于0.96,承载力和刚度退化稳定,等效黏滞阻尼系数达到0.25以上,表明联肢弯剪型钢板剪力墙具有优越的抗震性能。加载过程中,连梁先于墙板发生屈服,墙板先屈曲后屈服,此后柱脚和横梁相继屈服。连梁的引入改变了结构的屈服机制,提高了整体的延性和耗能能力,能够组成多道抗震防线,且试件整体最终也体现出合理的破坏机制。整体侧移曲线呈弯剪变形模式。该试验研究更加贴合实际工程中联肢钢板剪力墙结构的应用情况,为联肢钢板剪力墙结构的进一步研究和应用提供了试验基础。

低周反复荷载下T型双波纹钢板混凝土组合剪力墙受力性能试验研究

为研究低周反复荷载下T型双波纹钢板混凝土组合剪力墙的受力性能,对5个T型双波纹钢板混凝土组合剪力墙进行了低周反复加载试验。基于试验数据,分析了T型组合剪力墙的破坏模式、滞回曲线、变形能力及耗能能力,重点研究了边缘约束条件、波纹类型以及轴压比不同变化参数对T型组合剪力墙抗震性能指标的影响规律。研究结果表明:T型双波纹钢板混凝土组合剪力墙破坏模式主要有压屈破坏和压弯破坏两种;设置边缘约束构件是提高T型双波纹钢板混凝土组合剪力墙承载能力和变形能力的关键因素;纵向窄波纹钢板对内部混凝土的约束能力更强,在低周反复荷载下两者协同工作性更优,而横向窄波纹钢板试件强度退化最严重;采用全截面塑性设计方法进行T型双波纹钢板混凝土组合剪力墙正截面承载力计算,试验值与计算值吻合良好;T型双波纹钢板混凝土组合剪力墙具有较好的承载能力和变形能力,可适用于高层及超高层建筑结构中。

HPC端部加强双钢板组合剪力墙的抗震性能

为研究高性能混凝土端部加强双钢板组合剪力墙受力机理及破坏形态,以轴压比、腹部普通混凝土强度等级为关键参数,设计了4片普通试件,7片HPC端部加强试件,运用ABAQUS构建其有限元模型,研究其抗震性能。结果表明:同轴压比下,HPC端部加强试件相比普通试件屈服荷载提高16.30%,峰值荷载提升13.40%;随着轴压比提高,HPC端部加强试件峰值荷载和屈服荷载分别提高7.22%和2.72%,随着轴压比减小,HPC端部加强试件延性提升22.26%;提高腹部腔体混凝土强度等级,HPC端部加强试件的屈服荷载和峰值荷载分别提高13.01%和11.14%,延性提升16.91%。

窄翼缘异形柱-波纹钢板剪力墙体系的抗震性能

针对钢结构住宅凸梁、凸柱和抗侧刚度不足的问题,提出一种新型窄翼缘异形柱-波纹钢板剪力墙体系;通过与传统H形钢柱-平钢板剪力墙体系进行对比,确定内嵌波纹钢板布置方式,采用ABAQUS软件建立所提出体系的有限元模型,对所提出体系的抗震性能进行分析,探讨外部框架截面形式与布置方式、波纹钢板厚度与剪跨比等对所提出体系的抗侧承载力、耗能能力和塑性变形能力的影响。结果表明:所提出的体系具有较大的抗侧承载力和较强的耗能能力、塑性变形能力,极限抗侧承载力为设计值的1.73倍,具备一定的安全储备;横向布置的波纹钢板能有效减小其作用于框架梁柱的荷载;采用十字形异形柱使所提出的体系有更强的塑性变形能力;所提出体系中的异形柱偏肢宜沿剪力墙面内方向布置,内嵌波纹钢板厚度宜取为3~5 mm,剪跨比宜控制在1.25左右。

装配式带夹芯保温槽型玻璃钢-钢板-槽钢-混凝土组合剪力墙轴压性能研究

提出一种装配式带夹芯保温槽型玻璃钢-钢板-槽钢-混凝土组合剪力墙,设计3个具有不同配筋形式和混凝土种类的墙板试件进行轴心受压试验,获得墙板在轴压作用下的破坏模式、荷载-位移曲线、荷载-应变曲线、承载力储备系数、延性系数、材料利用率等性能指标。通过ABAQUS有限元分析软件对墙板进行参数化分析,研究内嵌钢板强度和厚度对其轴压性能的影响。结果表明,墙板具有良好的承载力储备能力和延性性能;混凝土中掺入1%体积比的钢纤维可显著提高墙板内混凝土的抗拉性能,使混凝土强度得到更加充分的利用,布置钢筋可以显著提高墙板延性;墙板的承载力和延性随内嵌钢板厚度和强度的增加而增大,强度为Q355、厚度为4、6mm时,墙板材料利用率更高。提出适用于该类墙板的轴压承载力设计公式,考虑钢板屈曲和截面组合效应的墙板轴心受压承载力设计公式计算结果较精确。

两边连接木盖板屈曲约束钢板剪力墙抗侧力性能试验研究

从环保角度提出一种钢木组合形式的两边连接防屈曲钢板剪力墙。基于已有的研究成果,设计两个试件,一个是没有木盖板约束的钢板剪力墙,另一个是覆盖木板作为钢板面外屈曲约束的钢板剪力墙。对试件采用位移控制加载方式进行拟静力试验,得到试件的滞回曲线。根据试验结果,分析了试件的骨架曲线、刚度退化和耗能能力。试验结果表明,木盖板抑制钢板屈曲效果较好,能够有效减小鼓曲声音;与无木盖板试件相比,有木盖板试件具有更高的承载力和更强的耗能能力。在试件破坏后,对试件进行拆卸,发现钢板腹部木盖板覆盖区域能够保持平整,拆卸后的木盖板在加载后也能保持完整。采用软件ABAQUS进行有限元分析,模拟结果和试验结果吻合,验证了模型的可行性。

轴压荷载下装配式SCCT剪力墙钢板屈曲行为研究

为探究装配式SCCT剪力墙钢板屈曲机制及钢板屈曲对墙体轴压承载性能的影响,建立了考虑钢材初始缺陷的装配式SCCT剪力墙非线性数值分析模型,对模型受力机理及钢板临界屈曲应力进行了分析,并根据参数分析结果提出了钢板临界屈曲应力计算方法。结果表明:墙体承载力主要由管内混凝土承担,各部件间协同工作,应力及变形传递性能良好;当管外混凝土厚度大于20 mm、钢材初始缺陷低于1/1000时,二者对钢板临界屈曲应力影响可忽略不计;对于Q235和Q355常用钢,要求钢板不发生弹性屈曲的距厚比限值分别为44.9、36.6。

西咸自由贸易企业服务中心超高层建筑结构设计

西咸自由贸易企业服务中心地处高烈度区,与渭河断裂之间的距离约2km,应考虑近场效应。项目采用钢管混凝土框架(钢梁)+钢筋混凝土核心筒混合结构,存在扭转不规则、刚度突变、有加强层和通高层等不规则项。为提高结构刚度,在避难层设置了2道伸臂桁架加强层。采用YJK、MIDAS Building软件进行了小震弹性对比分析,采用YJK进行了小震弹性时程分析。根据设定的抗震性能目标,对主体结构主要部位和关键构件进行了性能化设计;采用SAUSAGE软件进行了罕遇地震作用下的动力弹塑性时程分析;采用ANSYS软件对伸臂桁架关键节点进行有限元分析。结果表明:各项指标均符合设计要求,结构及构件均达到预设性能目标,结构体系合理,安全可靠。本工程部分墙体为钢板混凝土剪力墙,设计中应注重钢板混凝土剪力墙的构造措施,施工中应采取措施控制钢板变形。

钢板混凝土剪力墙拉弯剪性能试验研究

超高层建筑“细柔”特征容易引起底部剪力墙在强震下处于拉-弯-剪复合受力状态,中国《超限高层建筑工程抗震设防专项审查技术要点》(建质[2015]67号)建议墙肢采用配置型钢/钢板的方式来改善该种抗震性能,但缺乏相关试验研究。为此,进行了6片钢板混凝土剪力墙的低周往复荷载试验,研究了轴拉比、含钢率及剪跨比对墙肢拉弯剪性能的影响。研究表明:拉弯剪作用引起钢板混凝土剪力墙密集的裂缝分布和显著的钢材强化,并导致其剪切-拉弯耦合破坏。轴拉比增大,墙肢承载力、初始抗侧刚度和延性分别降低22%、41%和39%;剪跨比减小,墙肢承载力和抗侧刚度至少提升23%;同时增大含钢率和降低剪跨比,墙肢延性提高10%。相比其他国家规范,中国规范对拉弯剪作用下钢板混凝土剪力墙的抗剪承载力预测效果更好,但其未能考虑高含钢率对裂面销栓力的影响,故建议采用暗柱的初始含钢率进行修正。

带PBL剪力键的钢芯板混凝土组合剪力墙低周往复加载试验研究

为研究带PBL剪力键的钢芯板混凝土组合剪力墙的抗震性能,对1个型钢混凝土组合剪力墙和4个钢芯板混凝土组合剪力墙进行了循环往复加载试验;观察带PBL剪力键的钢芯板混凝土组合剪力墙在水平循环荷载下的破坏全过程,并分析该类剪力墙的滞回特征、变形能力、承载能力、耗能性能、刚度和强度退化能力。结果表明:钢芯板混凝土组合剪力墙的破坏模式主要为弯曲型破坏,滞回曲线较为饱满;配置钢芯板的剪力墙承载力、延性性能和耗能能力较优;PBL剪力键的构造方式可保证钢芯板与混凝土之间的黏结性能完好,PBL剪力键平放会导致剪力墙出现沿PBL剪力键的水平通缝,影响剪力墙承载能力的发挥,建议采用PBL剪力键竖放的构造形式。

四边连接圆形压痕钢板剪力墙的抗侧能力分析

为合理调节或优化传统钢板剪力墙(steel plate shear wall,SPSW)的抗震性能,本文提出了一种新型的带圆形压痕的钢板剪力墙结构(steel plate shear wall with circle dents,SPSW-CD)。基于有限元方法系统研究了压痕孔径、压痕孔距、压痕深度、钢板厚度和钢材强度等参数对SPSW-CD抗侧性能的影响,提出了四边连接SPSW-CD抗侧刚度及水平承载力的简化计算公式。分析结果表明随着压痕孔径增加,SPSW-CD的初始抗侧刚度及水平承载力均呈降低趋势;压痕孔距及钢板厚度越大,SPSW-CD抗侧性能越优。随着钢材强度增加,SPSW-CD水平承载力呈明显的增大趋势,但对其抗侧刚度影响不明显。压痕深度对SPSW-CD抗侧性能的影响可忽略。SPSW-CD抗侧刚度及水平承载力计算公式计算误差均小于10%,研究成果可用于此类结构的工程设计。

轴压荷载作用下双钢板-混凝土组合剪力墙中钢板屈曲性能研究

双钢板-混凝土组合剪力墙作为建筑物中的抗侧力构件,具有承载力高、耗能能力强和延性好等优点。在高层和超高层建筑结构中,双钢板-混凝土组合剪力墙需要承担一定的竖向荷载,钢板在正常使用阶段要求不发生弹性屈曲。钢板初始几何缺陷是影响双钢板-混凝土组合剪力墙轴压荷载下钢板屈曲应力的重要指标,而在以往的研究中,钢板屈曲应力的计算方法并未予以考虑。基于前期的双钢板-混凝土组合剪力墙轴压试验研究,采用分析软件ABAQUS建立了双钢板-混凝土组合剪力墙轴压试件有限元模型,模型中引入了钢板的初始几何缺陷,从钢板屈曲应变、荷载-位移曲线和破坏模态等方面与试验结果进行对比,验证了模型分析结果的合理性。在此基础上进行参数分析,系统研究了钢板初始几何缺陷、钢板距厚比和钢材屈服强度等参数对钢板屈曲性能的影响规律,基于试验和数值模拟分析结果,提出了考虑钢板初始几何缺陷影响的双钢板-混凝土组合剪力墙钢板屈曲应力计算方法。