Review on uncertainty analysis and information fusion diagnosis of aircraft control system

In the aircraft control system,sensor networks are used to sample the attitude and environmental data.As a result of the external and internal factors(e.g.,environmental and task complexity,inaccurate sensing and complex structure),the aircraft control system contains several uncertainties,such as imprecision,incompleteness,redundancy and randomness.The information fusion technology is usually used to solve the uncertainty issue,thus improving the sampled data reliability,which can further effectively increase the performance of the fault diagnosis decision-making in the aircraft control system.In this work,we first analyze the uncertainties in the aircraft control system,and also compare different uncertainty quantitative methods.Since the information fusion can eliminate the effects of the uncertainties,it is widely used in the fault diagnosis.Thus,this paper summarizes the recent work in this aera.Furthermore,we analyze the application of information fusion methods in the fault diagnosis of the aircraft control system.Finally,this work identifies existing problems in the use of information fusion for diagnosis and outlines future trends.

Decentralized Optimal Control and Stabilization of Interconnected Systems With Asymmetric Information

The paper addresses the decentralized optimal control and stabilization problems for interconnected systems subject to asymmetric information.Compared with previous work,a closed-loop optimal solution to the control problem and sufficient and necessary conditions for the stabilization problem of the interconnected systems are given for the first time.The main challenge lies in three aspects:Firstly,the asymmetric information results in coupling between control and estimation and failure of the separation principle.Secondly,two extra unknown variables are generated by asymmetric information(different information filtration)when solving forward-backward stochastic difference equations.Thirdly,the existence of additive noise makes the study of mean-square boundedness an obstacle.The adopted technique is proving and assuming the linear form of controllers and establishing the equivalence between the two systems with and without additive noise.A dual-motor parallel drive system is presented to demonstrate the validity of the proposed algorithm.

A guidance and control design with reduced information for a dual-spin stabilized projectile

In this paper,an integrated guidance and control method based on an adaptive path-following controller is proposed to control a spin-stabilized projectile with only translational motion information under the constraint of an actuator,uncertainties in aerodynamic parameters and measurements,and control system complexity.Owing to the fairly high rotation speed,the dynamic model of this missile is strongly nonlinear,uncertain and coupled in pitch,yaw and roll channels.A theoretical equivalent resultant force and uncertainty compensation method are comprehensively used to realize decoupling of pitch and yaw.In response to the strong nonlinear and time-varying characteristics of the dynamic system,the quasi-linear model whose parameters are obtained by interpolation of points selected as the segmentation points in the trajectory envelope,is used for calculation in each step.To cope with the system uncertainty caused by model approximation,parameter uncertainty and ballistic interference,an extended state estimator is used to compensate the output feedback according to the test ballistic angle.In order to improve the tracking efficiency and ensure the tracking error convergence with only translational motion information,the virtual guide point,whose derivative is deduced according to the Lyapunov principle,is calculated in real time according to the projection relationship between the real-time position and the reference trajectory,and a virtual line-of-sight angle and the backstepping method are used for the design of the guidance and control system.In order to avoid the influence of control input saturation on the guidance and control performance due to the actuator limitation and improve the robustness of the system,an anti-saturation compensator is designed according to the two-step method.The feasibility and effectiveness of the path-following controller is verified through closed-loop flight simulations with measurement,control,and condition uncertainties.The results indicate that the designed controller can converge to the reference path and evidently decrease the distance between the impact point and target under different uncertainties.

Dynamics modeling and optimal control for multi-information diffusion in Social Internet of Things

As an ingenious convergence between the Internet of Things and social networks,the Social Internet of Things(SIoT)can provide effective and intelligent information services and has become one of the main platforms for people to spread and share information.Nevertheless,SIoT is characterized by high openness and autonomy,multiple kinds of information can spread rapidly,freely and cooperatively in SIoT,which makes it challenging to accurately reveal the characteristics of the information diffusion process and effectively control its diffusion.To this end,with the aim of exploring multi-information cooperative diffusion processes in SIoT,we first develop a dynamics model for multi-information cooperative diffusion based on the system dynamics theory in this paper.Subsequently,the characteristics and laws of the dynamical evolution process of multi-information cooperative diffusion are theoretically investigated,and the diffusion trend is predicted.On this basis,to further control the multi-information cooperative diffusion process efficiently,we propose two control strategies for information diffusion with control objectives,develop an optimal control system for the multi-information cooperative diffusion process,and propose the corresponding optimal control method.The optimal solution distribution of the control strategy satisfying the control system constraints and the control budget constraints is solved using the optimal control theory.Finally,extensive simulation experiments based on real dataset from Twitter validate the correctness and effectiveness of the proposed model,strategy and method.

Study on the Interactivity of Controlled and Automatic Information Processing in L2 Reading

L2 reading is not only an important channel for people to obtain information and knowledge,but also the main way for people to learn a foreign language.Reading information processing can be divided into controlled processing and automatic processing.Controlled information processing is a conscious and resource-intensive processing model,while automatic information processing is an unconscious and automatic processing model.This study investigates the characteristics and interactivity of controlled and automatic information processing in L2 reading,and explores the roles of controlled and automatic information processing strategies in improving L2 reading ability.The findings are as follows:(a)controlled and automatic information processing is interactive in L2 reading;and(b)the uses of controlled and automatic information processing strategies are beneficial to the improvement of the reading ability of L2 learners.This study has important theoretical and practical value in improving the efficiency of L2 reading teaching and learning.

Tufting Carpet Machine Information Model Based on Object Linking and Embedding for Process Control Unified Architecture

In view of the lack of research on the information model of tufting carpet machine in China,an information modeling method based on Object Linking and Embedding for Process Control Unified Architecture(OPC UA)framework was proposed to solve the problem of“information island”caused by the differentiated data interface between heterogeneous equipment and system in tufting carpet machine workshop.This paper established an information model of tufting carpet machine based on analyzing the system architecture,workshop equipment composition and information flow of the workshop,combined with the OPC UA information modeling specification.Subsequently,the OPC UA protocol is used to instantiate and map the information model,and the OPC UA server is developed.Finally,the practicability of tufting carpet machine information model under the OPC UA framework and the feasibility of realizing the information interconnection of heterogeneous devices in the tufting carpet machine digital workshop are verified.On this basis,the cloud and remote access to the underlying device data are realized.The application of this information model and information integration scheme in actual production explores and practices the application of OPC UA technology in the digital workshop of tufting carpet machine.

Improved spectrum sharing algorithm based on feedback control information in cognitive radio networks

In order to avoid the system performance deterioration caused by the wireless fading channel and imperfect channel estimation in cognitive radio networks, the spectrum sharing problem with the consideration of feedback control information from the primary user is analyzed. An improved spectrum sharing algorithm based on the combination of the feedback control information and the optimization algorithm is proposed. The relaxation method is used to achieve the approximate spectrum sharing model, and the spectrum sharing strategy that satisfies the individual outage probability constraints can be obtained iteratively with the observed outage probability. Simulation results show that the proposed spectrum sharing algorithm can achieve the spectrum sharing strategy that satisfies the outage probability constraints and reduce the average outage probability without causing maximum transmission rate reduction of the secondary user.

Research on fault-tolerant control of networked control systems based on information scheduling

A kind of networked control system is studied; the networked control system with noise disturbance is modeled based on information scheduling and control co-design. Augmented state matrix analysis method is introduced, and robust fault-tolerant control problem of networked control systems with noise disturbance under actuator failures is studied. The parametric expression of the controller under actuator failures is given. Furthermore, the result is analyzed by simulation tests, which not only satisfies the networked control systems stability, but also decreases the data information number in network channel and makes full use of the network resources.

Iterative Learning Control With Incomplete Information： A Survey

Abstract--This paper conducts a survey on iterative learn- ing control （ILC） with incomplete information and associated control system design, which is a frontier of the ILC field. The incomplete information, including passive and active types, can cause data loss or fragment due to various factors. Passive incomplete information refers to incomplete data and information caused by practical system limitations during data collection, storage, transmission, and processing, such as data dropouts, delays, disordering, and limited transmission bandwidth. Active incomplete information refers to incomplete data and information caused by man-made reduction of data quantity and quality on the premise that the given objective is satisfied, such as sampling and quantization. This survey emphasizes two aspects： the first one is how to guarantee good learning performance and tracking performance with passive incomplete data, and the second is how to balance the control performance index and data demand by active means. The promising research directions along this topic are also addressed, where data robustness is highly emphasized. This survey is expected to improve understanding of the restrictive relationship and trade-off between incomplete data and tracking performance, quantitatively, and promote further developments of ILC theory. Index Terms--Data dropout, data robustness, incomplete in- formation, iterative learning controi（ILC）, quantized control, sampled control, varying lengths.

Active control of turbulence for drag reduction based on the detection of near-wall streamwise vortices by wall information

The spatial relations between the measurable wall quantities （streamwise shear stress τwx, spanwise shear stress τwz, and pressure fluctuations Pw） and the near-wall streamwise vortices （NWSV） are investigated via direct numerical simulation （DNS） databases of fully developed turbulent channel flow at a low Reynolds number. In the stan- dard turbulent channel flow, the results show that all the wall measurable variables are closely associated with the NWSV. But after applying a stochastic interference, the relation based on τwx breaks down while the correlations based on Pw and τwz are still robust. Hence, two wall flow quantities based on Pw and τwz are proposed to detect the NWSV. As an appli- cation, two new control schemes are developed to suppress the near-wall vortical structures using the actuation of wall blowing/suction and obtain 16 % and 11% drag reduction, respectively.

SPOT WELDING QUALITY FUZZY CONTROL SYSTEM BASED ON MULTISENSOR INFORMATION FUSION

The multisensor information fusion technology is adopted for real time measuring the four parameters which are connected closely with the weld nugget size（welding current, electrode displacement, dynamic resistance, welding time）, thus much more original information is obtained. In this way, the difficulty caused by measuring indirectly weld nugget size can be decreased in spot welding quality control, and the stability of spot welding quality can be improved. According to this method, two-dimensional fuzzy controllers are designed with the information fusion result as input and the thyristor control signal as output. The spot welding experimental results indicate that the spot welding quality intelligent control method based on multiscnsor information fusion technology can compensate the influence caused by variable factors in welding process and ensure the stability of welding quality.

A framework of force of information influence and application for C4KISR system

The subversive nature of information war lies not only in the information itself, but also in the circulation and application of information. It has always been a challenge to quantitatively analyze the function and effect of information flow through command, control, communications, computer, kill, intelligence,surveillance, reconnaissance (C4KISR) system. In this work, we propose a framework of force of information influence and the methods for calculating the force of information influence between C4KISR nodes of sensing, intelligence processing,decision making and fire attack. Specifically, the basic concept of force of information influence between nodes in C4KISR system is formally proposed and its mathematical definition is provided. Then, based on the information entropy theory, the model of force of information influence between C4KISR system nodes is constructed. Finally, the simulation experiments have been performed under an air defense and attack scenario. The experimental results show that, with the proposed force of information influence framework, we can effectively evaluate the contribution of information circulation through different C4KISR system nodes to the corresponding tasks. Our framework of force of information influence can also serve as an effective tool for the design and dynamic reconfiguration of C4KISR system architecture.

Controlled Teleportation of Multi-qutrit Quantum Information by Swapping Entanglement

We present a scheme for teleporting multi-qutrit quantum information from a sender to a receiver via the control of many agents in a network. Agents＇s control parameters are obtained via quantum entanglement swapping. In our scheme, Zhang and Man＇s QSS protocol [Phys. Rev. A 72 （2005） 022303] based on Bell-state entanglement swapping is generalized to a qutrit case. Our scheme owns the advantage of having higher code capacity and better security than the work [Commun. Theor. Phys. 44 （2005） 847] on controlled teleportation for multi-qubit.

Controlled Teleportation of Multi-qudit Quantum Information by Entanglement Swapping

In this paper, we present a scheme for teleporting multi-qudit quantum state, from the sender Alice to the receiver Charlie via many controllers Bobs, whose control parameters are obtained using entanglement swapping of maximally d-dimensional EPR pair. In our scheme, Yang＇s qutrit controlled teleportation protocol [Commun. Theor. Phys. 49 （2008） 338] based on Bell-state entanglement swapping is generalized to the qudit case. The scheme of multi-qudit owns the advantage of having higher code capacity and better security than that of multi-qutrit.

On String Stable Control of Platoon of Automated Vehicles with Predecessor-successor Information Framework

For the constant distance spacing policy,the existing researches of the string stability focus on the single-predecessor information framework（SPIF） and predecessor-successor information framework（PSIF）.The research results demonstrated that the string stability could not be guaranteed with the SPIF,and then the PSIF was proposed to resolve this string instability.But the issue,whether the string stability can be guaranteed when applying the PSIF,is still controversial.Meanwhile,most of the previous researches on the string stability were conducted without consideration of the parasitic time delays and lags.In this paper,the practical longitudinal vehicle dynamics model is built with consideration of the parasitic time delays and lags existing in the actuators,sensors or the communication systems.Secondly,the detailed theoretical analysis of string stability in frequency domain is conducted to demonstrate that the classical linear control laws can not ensure the string stability when applying both the symmetrical PSIF（SPSIF） and asymmetrical PSIF（APSIF）.Thirdly,a control law,which adds the position and velocity information of the leading vehicle,is proposed to guarantee string stability for small/medium platoon,and the other control law,which adds the acceleration information of the controlled vehicle,is proposed to guarantee string stability for large platoon as well as small/medium platoon.Finally,the comparative simulation is conducted to confirm the conducted analysis and the proposed control laws.The conducted research completes the means to analyze the string stability in frequency domain,provides the parameters＇ reference for the design and implementation of the practical automatic following controllers,and improves the reliability and stability of the platoon of automatic vehicles.

Controlled Quantum Network Coding Without Loss of Information

Quantum network coding is used to solve the congestion problem in quantum communication,which will promote the transmission efficiency of quantum information and the total throughput of quantum network.We propose a novel controlled quantum network coding without information loss.The effective transmission of quantum states on the butterfly network requires the consent form a third-party controller Charlie.Firstly,two pairs of threeparticle non-maximum entangled states are pre-shared between senders and controller.By adding auxiliary particles and local operations,the senders can predict whether a certain quantum state can be successfully transmitted within the butterfly network based on the Z-{10>,|1>}basis.Secondly,when trans-mission fails upon prediction,the quantum state will not be lost,and it will sill be held by the sender.Subsequently,the controller Charlie re-prepares another three-particle non-maximum entangled state to start a new round.When the predicted transmission is successful,the quantum state can be transmitted successfully within the butterfly network.If the receiver wants to receive the effective quantum state,the quantum measurements from Charlie are needed.Thirdly,when the transmission fails,Charlie does not need to integrate the X-{1+>,1->}basis to measure its own particles,by which quantum resources are saved.Charlie not only controls the effective transmission of quantum states,but also the usage of classical and quantum channels.Finally,the implementation of the quantum circuits,as well as a flow chart and safety analysis of our scheme,is proposed.

Research on Internal Control Information Disclosure of Real Estate Industry-Taking Taihe Group as an Example

After the outbreak of the Enron incident in the United States, China’s attention to internal control information disclosure has gradually increased. As a pillar industry of the national economy, real estate industry internal control system is sound, which has an important impact on social stability and healthy economic development. Therefore, this paper selects a company in the real estate industry, through the analysis of its internal control information disclosure, finds out its existing problems, and puts forward practical and feasible suggestions.

Whole-Process Project Cost Management Based on Building Information Modeling (BIM)

The whole-process project cost management based on building information modeling(BIM)is a new management method,aiming to realize the comprehensive optimization and improvement of project cost management through the application of BIM technology.This paper summarizes and analyzes the whole-process project cost management based on BIM,aiming to explore its application and development prospects in the construction industry.Firstly,this paper introduces the role and advantages of BIM technology in engineering cost management,including information integration,data sharing,and collaborative work.Secondly,the paper analyzes the key technologies and methods of the whole-process project cost management based on BIM,including model construction,data management,and cost control.In addition,the paper also discusses the challenges and limitations of the whole-process BIM project cost management,such as the inconsistency of technical standards,personnel training,and consciousness change.Finally,the paper summarizes the advantages and development prospects of the whole-process project cost management based on BIM and puts forward the direction and suggestions for future research.Through the research of this paper,it can provide a reference for construction cost management and promote innovation and development in the construction industry.

Information Quality Control of ERP System

From the viewpoint of manufacturing enterprises, th is thesis discusses the concept and definition of information quality as well as t he connotation of information quality. Based on our personal experiences of many years, we have summarized the cases of success and failure with ERP system, an d from the angle of information quality control, we have come up with the follow ing concepts : static information quality of enterprises, information maturity o f enterprises and dynamic information quality.

Study on control information network and its real-time property

The control network is an important developmental orientation in the remote control system. As the control network and information network are comparatively alike in the framework and technology, we can build a control network which is similar to the common information network. In the era when the information network is becoming increasingly mature, it is a royal road to construct or rebuild a control information network in the development of the control network by relying on the achievements made in the information network or current information resources. This paper expounds the construction idea of the control information network, gives the idiographic realization method and then researches into the real-time problem encountered in the control information network, and presents a three-closed-loop control system based on virtualized reality. The feasibility of the idea is validated via experiments and simulations separately.