Performance Comparison of Two Meta-Model for the Application to Finite Element Model Updating of Structures

To investigate the application of meta-model for finite element( FE) model updating of structures,the performance of two popular meta-model,i. e.,Kriging model and response surface model( RSM),were compared in detail. Firstly,above two kinds of meta-model were introduced briefly. Secondly,some key issues of the application of meta-model to FE model updating of structures were proposed and discussed,and then some advices were presented in order to select a reasonable meta-model for the purpose of updating the FE model of structures. Finally,the procedure of FE model updating based on meta-model was implemented by updating the FE model of a truss bridge model with the measured modal parameters. The results showed that the Kriging model was more proper for FE model updating of complex structures.

PRINCIPAL COMPONENT DECOMPOSITION BASED FINITE ELEMENT MODEL UPDATING FOR STRAIN-RATE-DEPENDENCE NONLINEAR DYNAMIC PROBLEMS

Thin wail component is utilized to absorb impact energy of a structure. However, the dynamic behavior of such thin-walled structure is highly non-linear with material, geometry and boundary non-linearity. A model updating and validation procedure is proposed to build accurate finite element model of a frame structure with a non-linear thin-walled component for dynamic analysis. Design of experiments （DOE） and principal component decomposition （PCD） approach are applied to extract dynamic feature from nonlinear impact response for correlation of impact test result and FE model of the non-linear structure. A strain-rate-dependent non-linear model updating method is then developed to build accurate FE model of the structure. Computer simulation and a real frame structure with a highly non-linear thin-walled component are employed to demonstrate the feasibility and effectiveness of the proposed approach.

A bayesian optimisation methodology for the inverse derivation of viscoplasticity model constants in high strain-rate simulations

We present an inverse methodology for deriving viscoplasticity constitutive model parameters for use in explicit finite element simulations of dynamic processes using functional experiments, i.e., those which provide value beyond that of constitutive model development. The developed methodology utilises Bayesian optimisation to minimise the error between experimental measurements and numerical simulations performed in LS-DYNA. We demonstrate the optimisation methodology using high hardness armour steels across three types of experiments that induce a wide range of loading conditions: ballistic penetration, rod-on-anvil, and near-field blast deformation. By utilising such a broad range of conditions for the optimisation, the resulting constitutive model parameters are generalised, i.e., applicable across the range of loading conditions encompassed the by those experiments(e.g., stress states, plastic strain magnitudes, strain rates, etc.). Model constants identified using this methodology are demonstrated to provide a generalisable model with superior predictive accuracy than those derived from conventional mechanical characterisation experiments or optimised from a single experimental condition.

INFLUENCES OF EDGING ROLL SHAPE ON THE PLASTIC STRAIN DISTRIBUTION OF SLAB DURING MULTI-PASS V-H ROLLING PROCESS

Multi-pass slab vertical-horizontal （V-H） rolling process with variable edging roll shape have been simulated with explicit dynamic finite element method and updating geometric method. The distributions of plastic strain contour in slab daring rolling process with different edging roll and under different rolling stage have been obtained. The results show that there exist two thin strain assembling zones in slab when the flat edging roll is used, and there just exist one strain assembling zone in slab when the edging roll with groove is used. And compared the deformation equality between flat edging roll and edging roll with groove, the lateris better than the former, which supplies the theory prove to the slab deformation distribution during V-H rolling process and is helpful for predicting the slab texture.

A deep neural network based surrogate model for damage identification in full-scale structures with incomplete noisy measurements

The paper introduces a novel approach for detecting structural damage in full-scale structures using surrogate models generated from incomplete modal data and deep neural networks(DNNs).A significant challenge in this field is the limited availability of measurement data for full-scale structures,which is addressed in this paper by generating data sets using a reduced finite element(FE)model constructed by SAP2000 software and the MATLAB programming loop.The surrogate models are trained using response data obtained from the monitored structure through a limited number of measurement devices.The proposed approach involves training a single surrogate model that can quickly predict the location and severity of damage for all potential scenarios.To achieve the most generalized surrogate model,the study explores different types of layers and hyperparameters of the training algorithm and employs state-of-the-art techniques to avoid overfitting and to accelerate the training process.The approach’s effectiveness,efficiency,and applicability are demonstrated by two numerical examples.The study also verifies the robustness of the proposed approach on data sets with sparse and noisy measured data.Overall,the proposed approach is a promising alternative to traditional approaches that rely on FE model updating and optimization algorithms,which can be computationally intensive.This approach also shows potential for broader applications in structural damage detection.

Damage identification method of girder bridges based on finite element model updating and modal strain energy

A timely and accurate damage identification for bridge structures is essential to prevent sudden failures/collapses and other catastrophic accidents.Based on response surface model(RSM)updating and element modal strain energy(EMSE)damage index,this paper proposes a novel damage identification method for girder bridge structures.The effectiveness of the proposed damage identification method is investigated using experiments on four simply supported steel beams.With Xiabaishi Bridge,a prestressed continuous rigid frame bridge with large span,as the engineering background,the proposed damage identification method is validated by using numerical simulation to generate different bearing damage scenarios.Finally,the efficiency of the method is justified by considering its application to identifying cracking damage for a real continuous beam bridge called Xinyihe Bridge.It is concluded that the EMSE damage index is sensitive to the cracking damage and the bearing damage.The locations and levels of multiple cracking damages and bearing damages can be also identified.The results illuminate a great potential of the proposed method in identifying damages of real bridge structures.

Fuzzy finite element model updating of bridges by considering the uncertainty of the measured modal parameters

It is significant to consider the effect of uncertainty of the measured modal parameters on the updated finite element(FE) model,especially for updating the FE model of practical bridges,since the uncertainty of the measured modal parameters cannot be ignored owing to the application of output-only identification method and the existence of the measured noise.A reasonable method is to define the objective of the FE model updating as the statistical property of the measured modal parameters obtained by conducting couples of identical modal tests,however,it is usually impossible to implement repeated modal test due to the limit of practical situation and economic reason.In this study,a method based on fuzzy finite element(FFM) was proposed in order to consider the effect of the uncertainty of the measured modal parameters on the updated FE model by using the results of a single modal test.The updating parameters of bridges were deemed as fuzzy variables,and then the fuzzification of objective of the FE model updating was proposed to consider the uncertainty of the measured modal parameters.Finally,the effectiveness of the proposed method was verified by updating the FE model of a practical bridge with the measured modal parameters.

Finite element model updating of a tied-arch bridge using Douglas-Reid method and Rosenbrock optimization algorithm

Condition assessment of bridges has become increasingly important. In order to accurately simulate the real bridge, finite element （FE） model updating method is often applied. This paper presents the calibration of the FE model of a reinforced concrete tied-arch bridge using Douglas-Reid method in combination with Rosenbrock optimization algorithm. Based on original drawings and topographic survey, a FE model of the investigated bridge is created. Eight global modes of vibration of the bridge are identified by ambient vibration tests and the frequency domain decomposition technique. Then, eight structural parameters are selected for FE model updating procedure through sensitivity analysis. Finally, the optimal structural parameters are identified using Rosenbrock optimization algorithm. Results show that although the identified parameters lead to a perfect agreement between approximate and measured natural frequencies, they may not be the optimal variables which minimize the differences between numerical and experimental modal data. However, a satisfied agreement between them is still presented. Hence, FE model updating based on Douglas-Reid method and Rosenbrock optimization algorithm could be used as an alternative to other complex updating procedures.

Structural finite element model updating using incomplete ambient vibration modal data

This paper presents an effective approach for updating finite element dynamic model from incomplete modal data identified from ambient vibration measurements.The proposed method is based on the relationship between the perturbation of structural parameters such as stiffness and mass changes and the modal data measurements of the tested structure such as measured mode shape readings.Structural updating parameters including both stiffness and mass parameters are employed to represent the differences in structural parameters between the finite element model and the associated tested structure.These updating parameters are then evaluated by an iterative solution procedure,giving optimised solutions in the least squares sense without requiring an optimisation technique.In order to reduce the influence of modal measurement uncertainty,the truncated singular value decomposition regularization method incorporating the quasi-optimality criterion is employed to produce reliable solutions for the structural updating parameters.Finally,the numerical investigations of a space frame structure and the practical applications to the Canton Tower benchmark problem demonstrate that the proposed method can correctly update the given finite element model using the incomplete modal data identified from the recorded ambient vibration measurements.

Finite element model updating of a rod-type ultrasonicmotor based on response surface method

The conventional finite element model （FEM） of a rod-type ultrasonic motor is usually simplified by means of continuous composite structure. Because the actual contact characteristics between the parts of the ultrasonic motor is ignored, there is bigger error between the calculated values and experimental results. Aiming at solving problem, a new modeling method of a rod-type ultrasonic motor is presented to obtain a high-accuracy FEM. The bolt pretension and the normal contact stiffness and friction coefficient of the contact surface of ultrasonic motor are all considered in this method, and the significant parameters of working mode of the motor are selected by the response surface method, and the goal of calculating the structural response rapidly is realized by building the response surface model to replace the FEM. The result of finite element model updating shows that the average error of modal frequencies of updated model drops to 0.21% from 1.20%. The accuracy of FEM is obviously improved, which indicates that the FEM updating based on response surface method is of great application value on the design for a rod-type ultrasonic motor.