Thermochronological dating was used to study the thermal evolution of the Mesozoic plutons and uplift history of the Yanshan orogenic belt. The results show that the cooling history of the plutons is complicated, corr...Thermochronological dating was used to study the thermal evolution of the Mesozoic plutons and uplift history of the Yanshan orogenic belt. The results show that the cooling history of the plutons is complicated, corresponding to the inhomogeneous uplift process of the Yanshan orogenic belt. The Panshan granite cooled fast during 226.48-204.95 Ma at a rate of 10.22℃/Ma after its emplacement at a depth of about 10 km, and its fast uplift occurred in about 96-35 Ma at an average rate of 0.115 mm/a. The Wulingshan pluton cooled fast during 132-127.23 Ma at a rate of 94.34℃/Ma, and its rapid uplift occurred in 86-45 Ma at an average rate of 0.186 mm/a. The Yunmengshan granite cooled fast during 143-120.99 Ma at a rate of 19.51℃/Ma, and its rapid uplift occurred in 106-103.95 Ma and 20-0.0 Ma at a rate of 1.06 mm/a and 0.15 mm/a respectively. The Sihetang granite-gneiss uplifted rapidly since 13 Ma at an average rate of 0.256 mm/a. The Badaling granite uplifted rapidly since 6 Ma at an average rate of 0.展开更多
Longmen Mountain located at the boundary between the Sichuan Basin and Tibetan Plateau,representing the steepest gradient of any edges of the plateau.Three endmember models of uplift process and mechanism have been pr...Longmen Mountain located at the boundary between the Sichuan Basin and Tibetan Plateau,representing the steepest gradient of any edges of the plateau.Three endmember models of uplift process and mechanism have been proposed,including crustal thickening,crustal flow,and crustal isostatic rebound.Here we use coeval sedimentary sequences in the foreland basin to restraint uplift process and mechanism in the Longmen Mountain.The more than 10,000 m thick Late TriassicQuaternary strata filled in this foreland basin and can be divided into six megasequences that are distinguished as two distinct types.The first type is the wedge-shaped megasequences which are sedimentary response of strong active thrust loading events,characterized by a high rate of subsidence and sediment accumulation,coarsening-upward succession and a dual-sourced sediment supply.This type includes Late Triassic,Late Jurassic to Early Cretaceous and Late Cretaceous to Paleogene megasequences.The second type is the tabular megasequences,characterized by the low rate of subsidence and sediment accumulation,finingupward succession,and a single-sourced sediment supply,which is sedimentary response of isostatic rebound and erosion unloading.This type includes the Early to Middle Jurassic,Middle Cretaceous and Neogene to Quaternary megasequences.Basing on sedimentary,active tectonic,geomorphic evidence,we infer that the direction has been reversed from SSWdirected sinistral strike-slip to NNE-directed dextral strike-slip during 40-3.6 Ma,and since 3.6 Ma,the Longmen Mountain thrust belt belong to times of isostatic rebound and erosional unloading with NNEdirected dextral strike-slip.This suggests that crustal isostatic rebound is a primary driver for uplift and topography of the present Longmen Mountain.The Wenchuan(Ms8.0) earthquake,which ruptured a large thrust fault with NNE-directed dextral strikeslip along the range front,is an active manifestation of this crustal isostatic rebound process with dextral strike-slipping and shortening.This process may be the cause for the Wenchuan Earthquake and the apparent paradox of high relief,little shortening,the relative dearth of historical seismicity in the region.展开更多
The uplift of Qing—Zang (Qinghai—Tibet) plateau was the most important event in the late Cenozoic, which deeply influenced the environments of the World, especially those of China. Since the uplift is so important a...The uplift of Qing—Zang (Qinghai—Tibet) plateau was the most important event in the late Cenozoic, which deeply influenced the environments of the World, especially those of China. Since the uplift is so important and complex that it has been become the research focus of earth science. Nevertheless, the initial time and evolution process of the uplift is still controversial.1\ The initial time of the uplift\;Qing\|Zang plateau is a union geological\|geomorphic unit, which is composed of several geological\|structural units. Each geological\|structural unit has itself exchange history of sea\|continent (basin\|mountain); the exchange time of the different parts differs. Therefore, the initial time of some part of the plateau is not the uplift time of the whole plateau. The plateau is the highland with high height above sea level, little relief of the top, large area and steep boundary. The plateau plane is the paleo\|peneplain, which was formed by the uplift of the plateau after the peneplanation. Therefore, the initial time of the uplift should be counted from the time that the peneplain had been formed.展开更多
The quantitative analysis of uplift process of the Qinghai—Tibet plateau is a key to deepen the study of uplift mechanism and dynamic model, for this, numerical simulate was done to the whole process of uplift of the...The quantitative analysis of uplift process of the Qinghai—Tibet plateau is a key to deepen the study of uplift mechanism and dynamic model, for this, numerical simulate was done to the whole process of uplift of the Qinghai—Tibet plateau.1 Geological model According to the tectonic evolution and lithospheric structure, continental crust in the Qinghai—Tibet plateau in profile is divided into sedimentary cover, crystalline rock formation and lower crust and composed of Kunlun, Bayan Har, Qiangtang, Gangdise and Himalaya blocks on the plane. Layer or block is bounded the detachment layer or large fault. On the basis of the uplift characteristics, the calculated time limit is in the Cenozoic since 65Ma, roughly four stages, i.e., 65 to 40Ma, 40 to 20Ma, 20 to 3Ma and 3Ma to now. Mesh profile used Yadong—Golmud Geoscience transect.展开更多
文摘Thermochronological dating was used to study the thermal evolution of the Mesozoic plutons and uplift history of the Yanshan orogenic belt. The results show that the cooling history of the plutons is complicated, corresponding to the inhomogeneous uplift process of the Yanshan orogenic belt. The Panshan granite cooled fast during 226.48-204.95 Ma at a rate of 10.22℃/Ma after its emplacement at a depth of about 10 km, and its fast uplift occurred in about 96-35 Ma at an average rate of 0.115 mm/a. The Wulingshan pluton cooled fast during 132-127.23 Ma at a rate of 94.34℃/Ma, and its rapid uplift occurred in 86-45 Ma at an average rate of 0.186 mm/a. The Yunmengshan granite cooled fast during 143-120.99 Ma at a rate of 19.51℃/Ma, and its rapid uplift occurred in 106-103.95 Ma and 20-0.0 Ma at a rate of 1.06 mm/a and 0.15 mm/a respectively. The Sihetang granite-gneiss uplifted rapidly since 13 Ma at an average rate of 0.256 mm/a. The Badaling granite uplifted rapidly since 6 Ma at an average rate of 0.
基金supported by the China National Natural Science Foundation (Grant No. 40841010,40972083,41172162)CGS Foundation (Grant No.1212011121268)Foundation from State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation (Grant No. SK-0801)
文摘Longmen Mountain located at the boundary between the Sichuan Basin and Tibetan Plateau,representing the steepest gradient of any edges of the plateau.Three endmember models of uplift process and mechanism have been proposed,including crustal thickening,crustal flow,and crustal isostatic rebound.Here we use coeval sedimentary sequences in the foreland basin to restraint uplift process and mechanism in the Longmen Mountain.The more than 10,000 m thick Late TriassicQuaternary strata filled in this foreland basin and can be divided into six megasequences that are distinguished as two distinct types.The first type is the wedge-shaped megasequences which are sedimentary response of strong active thrust loading events,characterized by a high rate of subsidence and sediment accumulation,coarsening-upward succession and a dual-sourced sediment supply.This type includes Late Triassic,Late Jurassic to Early Cretaceous and Late Cretaceous to Paleogene megasequences.The second type is the tabular megasequences,characterized by the low rate of subsidence and sediment accumulation,finingupward succession,and a single-sourced sediment supply,which is sedimentary response of isostatic rebound and erosion unloading.This type includes the Early to Middle Jurassic,Middle Cretaceous and Neogene to Quaternary megasequences.Basing on sedimentary,active tectonic,geomorphic evidence,we infer that the direction has been reversed from SSWdirected sinistral strike-slip to NNE-directed dextral strike-slip during 40-3.6 Ma,and since 3.6 Ma,the Longmen Mountain thrust belt belong to times of isostatic rebound and erosional unloading with NNEdirected dextral strike-slip.This suggests that crustal isostatic rebound is a primary driver for uplift and topography of the present Longmen Mountain.The Wenchuan(Ms8.0) earthquake,which ruptured a large thrust fault with NNE-directed dextral strikeslip along the range front,is an active manifestation of this crustal isostatic rebound process with dextral strike-slipping and shortening.This process may be the cause for the Wenchuan Earthquake and the apparent paradox of high relief,little shortening,the relative dearth of historical seismicity in the region.
文摘The uplift of Qing—Zang (Qinghai—Tibet) plateau was the most important event in the late Cenozoic, which deeply influenced the environments of the World, especially those of China. Since the uplift is so important and complex that it has been become the research focus of earth science. Nevertheless, the initial time and evolution process of the uplift is still controversial.1\ The initial time of the uplift\;Qing\|Zang plateau is a union geological\|geomorphic unit, which is composed of several geological\|structural units. Each geological\|structural unit has itself exchange history of sea\|continent (basin\|mountain); the exchange time of the different parts differs. Therefore, the initial time of some part of the plateau is not the uplift time of the whole plateau. The plateau is the highland with high height above sea level, little relief of the top, large area and steep boundary. The plateau plane is the paleo\|peneplain, which was formed by the uplift of the plateau after the peneplanation. Therefore, the initial time of the uplift should be counted from the time that the peneplain had been formed.
文摘The quantitative analysis of uplift process of the Qinghai—Tibet plateau is a key to deepen the study of uplift mechanism and dynamic model, for this, numerical simulate was done to the whole process of uplift of the Qinghai—Tibet plateau.1 Geological model According to the tectonic evolution and lithospheric structure, continental crust in the Qinghai—Tibet plateau in profile is divided into sedimentary cover, crystalline rock formation and lower crust and composed of Kunlun, Bayan Har, Qiangtang, Gangdise and Himalaya blocks on the plane. Layer or block is bounded the detachment layer or large fault. On the basis of the uplift characteristics, the calculated time limit is in the Cenozoic since 65Ma, roughly four stages, i.e., 65 to 40Ma, 40 to 20Ma, 20 to 3Ma and 3Ma to now. Mesh profile used Yadong—Golmud Geoscience transect.
