Evaluation of Cold Resistance and Semi-lethal Low Temperature(LT_(50))of Nine Pear Cultivars

[Objectives]To evaluate the cold resistance and semi-lethal temperature of pear cultivars,and provide a theoretical basis for the regional extension and breeding of cold-resistant pear cultivars.[Methods]Nine pear cultivars were used to study the changes in relative conductivity and cell injury rate of pear branches under low temperature stress,and the semi-lethal temperature(LT_(50))of pear branches was analyzed by fitting Logistic equation.[Results]The relative conductivity and cell injury rate of pear branches took on the trend of slow increase,rapid increase,and slow increase the decrease of treatment temperature.The LC_(50) of the nine pear cultivars were as follows:Nanguo pear-33.9℃,Wanyu-32.3℃,Red D Anjou-31.8℃,Jinfeng-31.3℃,Wujiuxiang-29.2℃,20 th Century Pear-29.1℃,Hanxiang-35.1℃,Yuluxiang-27.9℃ and Korla Fragrant Pear-29.2℃.[Conclusions]The semi-lethal temperature could reflect the cold resistance of pear trees,and Wanxiang had better cold resistance.The evaluation of cold resistance and semi-lethal temperature of pear cultivars can provide theoretical basis for regional extension and breeding of cold-resistant pear cultivars.

Monitoring and Early Warning of Paddy Rice Low Temperature Cold Damage in Ningxia with the Support of GIS and RS

The low temperature cold damage of paddy rice is the major agricultural meteorological disaster in Ningxia.The real-time monitoring and early warning of low temperature cold damage are very important to develop the advantages,avoid the disadvantages and reduce the disaster losses.Based on the prior researches on the low temperature cold damage indexes of paddy rice,we improved the small grid reckoning method of temperature and the reckoning precision with the support of GIS.By using the multitemporal remote sensing data,the paddy rice planting zone was picked.The calculation results of low temperature cold damage monitoring indexes were combined with the paddy rice planting zone,which judged the grade distribution and zone of low temperature cold damage in real time.Meanwhile,the low temperature cold damage of paddy rice was done the early warning,and the automatic monitoring early warning system was developed by using the weather forecast data.This method and system were applied to the business works,and the monitoring and early warning products of paddy rice low temperature cold damage business were made.The monitoring results basically corresponded with the actual situation,and the better monitoring service effect was gained.

Effect of Low Temperature and Sparse Light Conditions on Cold Tolerance of Different Rice Lines at Seedling Stage

Low temperature and sparse light in early spring is one of the factors causing reduction for rice production. So it is important to develop cold tolerance cultivars. In the present study, cold tolerance characters of 36 parents and 423 rice lines from 68 hybrid groups were investigated at seedling stage under low tempera- ture and sparse light conditions in field. There were 10 parent accessions with strong cold tolerance of level 1. Among them, 3 were common wild rice accessions; 4 were japonica rice cultivars; 2 were indica rice; 1 was offspring from hybrid be- tween indica and japonica.There were 33 lines with strong cold tolerance of level 1 from the hybrid groups of common wild rice,and 15 from the hybrid groups of IRBB5, and only 3 from the hybrid groups of BPHR96. There were abundant cold tolerance resources in rice germplasm. It was feasible to develop cold tolerance cul- tivars from the hybrids among common wild rice, japonica cultivars and indica culti- vars.

Controlled Rolling and Cooling Process for Low Carbon Cold Forging Steel

Effect of controlled rolling and cooling process on the mechanical properties of low carbon cold forging steel was investigated for different processing parameters of a laboratory hot rolling mill. The results show that the specimens with fast cooling after hot rolling exhibit very good mechanical properties, and the improvement of the mechanical properties can be attributed mainly to the ferrite-grain refinement. The mechanical properties increase with decreasing final cooling temperature within the range from 670 ℃ to 570 ℃ due to the finer interlamellar spacing of pearlite colony. The specimen with fast cooling after low temperature rolling shows the highest values of the mechanical properties. The effect of the ferrite grain size on the mechanical properties was greater than that of pearlite morphology in the present study. The mechanical properties of specimens by controlled rolling and cooling process without thermal treatment were greatly superior to that of the same specimens by the conventional rolling, and their tensile strength reached 490 MPa grade even in the case of low temperature rolling without controlled rolling. It might be expected to realize the substitution medium-carbon by low-carbon for 490 MPa grade cold forging steel with controlled rolling and cooling process.

Process Reengineering of Cold Chain Logistics of Agricultural Products Based on Low-carbon Economy

Through the process analysis of cold chain logistics of agricultural products,we find that cold chain logistics of agricultural products contradict the development model of low-carbon economy to some extent.We apply the development idea of low-carbon economy,introduce the thirdparty logistics companies,establish distribution center of cold chain logistics of agricultural products,and strengthen information sharing,to reengineer the process of cold chain logistics of agricultural products in China.The results show that applying low-carbon economy to process reengineering of cold chain logistics of agricultural products,has advantages of increasing added value of products,promoting scale merit and abating lag,plays a role in promoting emission reduction,high efficiency and environmental protection in the process of cold chain logistics of agricultural products in China.

夏热冬冷地区Low-E玻璃节能效果研究

目的为了解决夏热冬冷地区民宿玻璃幕墙节能设计过程中,对于性能接近的玻璃种类的选择问题。方法采用DeST模拟软件建立一个二层民宿的物理模型,依据《河南省公共建筑节能设计标准》选择满足要求的双玻Low-E玻璃和三玻Low-E玻璃。通过控制对负荷影响较大的3个参数:传热系数、太阳能总透射比、红外热能总透射比,来保持其控制参数相同或近似相等,再基于当地典型气象年的实测数据,采用DeST模拟软件对该民宿建筑进行全年能耗计算,并通过加拿大采暖季能耗评价体系(ER)与制冷季能耗评价体系(ERC)进行能耗分析,观察节能效果。结果表明将双玻用三玻进行改造后,ERC值为3.57,说明三玻两腔单Low-E中空(空气)玻璃在制冷季节能效果更好;ER值为-1.83,说明双玻单Low-E中空(氩气)玻璃在采暖季节能效果更优。三玻两腔单Low-E中空(空气)玻璃相对于双玻单Low-E中空(氩气)玻璃成本贵了60元/m^(2),每年带来的经济效益为1.92元/m^(2),需要至少30年才能完成成本回收,综合考虑各种因素,双玻单Low-E中空玻璃才是首选。结论研究结果为夏热冬冷地区民宿建筑玻璃幕墙种类的选择提供了一种新的方法,具有重要的参考价值和借鉴意义。

Effects of Phosphate Fertilizer on Cold Tolerance and Its Related Physiological Parameters in Rice Under Low Temperature Stress

The study was designated to explore the physiological mechanism of cold tolerance enhanced by phosphate in rice. An experiment was conducted to investigate the effects of different levels of phosphate fertilizer on cold tolerance and its related physiological parameters in rice seedings （chilling-sensitive cv. Changbai 9 and chilling-tolerant cv. Jijing 81） under low temperature stress. At the same time, the identification of cold tolerance was conducted. Compared with the normal temperature treatment, the relative chlorophyll content, photosynthesis rate, Fv/Fm and qP decreased and index of unsaturated fatty acid increased in rice under low temperature stress. The effect of chilling-sensitive cultivars was more than that of chilling-tolerant cultivars, more phosphorus fertilizer properly improved seedling quality of rice, slowed relative chlorophyll content dropping degree of rice seeding, increased photosynthesis rate, Fv/Fm, qP and index of unsaturated fatty acids, and enhanced the ability to chilling-tolerant cultivars under low temperature. The effect on chilling-tolerant cultivars was significantly higher than that on chilling sensitive cultivars by applying more phosphorus fertilizer. Phosphate regulated photosynthetic physiology and membrane fluidity to reduce injury by low temperature, and increasd the cold tolerance capacity of rice.

Low Cycle Fatigue and Strengthening Mechanism of Cold Extruded Large Diameter Internal Thread of Q460 Steel

large diameter internal thread of high-strength steel（LDITHSS） manufactured by traditional methods always has the problems of low accuracy and short life. Compared with traditional methods, the cold extrusion process is an effective means to realize higher accuracy and longer life. The low-cycle fatigue properties of LDITHSS are obtained by experiments, and the initiation and propagation of fatigue cracks are observed by scanning electron microscope（SEM）. Based on the mechanical properties, surface microstructure and residual stress, the strengthening mechanism of cold extruded large diameter internal thread（LDIT） is discussed. The results show that new grains or sub-grains can be formed on the surface of LDIT due to grain segmentation and grain refinement during cold extrusion. The fibrous structures appear as elongated and streamlined along the normal direction of the tooth surface which leads to residual compressive stress on the extruded surface. The maximum tension stress of LDIT after cold extrusion is found to be 192.55 k N. Under low stress cycling, the yield stress on thread increases, the propagation rate of crack reduces, the fatigue life is thus improved significantly with decreasing surface grain diameter and the average fatigue life increases to 45.539×10~3 cycle when the maximum applied load decreases to 120 k N. The low cycle fatigue and strengthening mechanism of cold extruded LDIT revealed by this research has significant importance to promote application of internal thread by cold extrusion processing.

Impacts of Two Types of Northward Jumps of the East Asian Upper-tropospheric Jet Stream in Midsummer on Rainfall in Eastern China

The East Asian upper-tropospheric jet stream （EAJS） typically jumps north of 45~N in midsummer. These annual northward jumps are mostly classified into two dominant types： the first type corresponds to the enhanced westerly to the north of the EAJS＇s axis （type A）, while the second type is related to the weakened westerly within the EAJS＇s axis （type B）. In this study, the impacts of these two types of northward jumps on rainfall in eastern China are investigated. Our results show that rainfall significantly increases in northern Northeast China and decreases in the Yellow River-Huaihe River valleys, as well as in North China, during the type A jump. As a result of the type B jump, rainfall is enhanced in North China and suppressed in the Yangtze River valley. The changes in rainfall in eastern China during these two types of northward jumps are mainly caused by the northward shifts of the ascending air flow that is directly related to the EAJS. Concurrent with the type A （B） jump, the EAJS-related ascending branch moves from the Yangtze-Huai River valley to northern Northeast （North） China when the EAJS＇s axis jumps from 40~N to 55~N （50~N）. Meanwhile, the type A jump also strengthens the Northeast Asian low in the lower troposphere, leading to more moisture transport to northern Northeast China. The type B jump, however, induces a northwestward extension of the lower-tropospheric western North Pacific subtropical high and more moisture transport to North China.

Effect of Si Content on Mechanical Properties of a Mo and V Free Low Alloy Cast Steel for Automobile Cold Pressing Die

The effects of Si content on combinations of important properties such as hardness, hardenability, and weldability in addition to strength increment were systematically investigated to develop a Mo and V free low alloy cast steel for automobile cold pressing die insert. For the evaluation of the applicability as the die insert, the mechanical properties were measured after spheroidization annealing （SA）, quenching and tempering （Q/T）, and flame hardening （FH） treatments, respectively. The developed 0.8%-1.6%Si containing Mo and V free alloy cast steels showed excellent matrix strengthening effect, hardenability, and weldability, fulfilling the industrial criterion of the mechanical properties for the die insert.

Impacts of an Improved Low-Level Cloud Scheme on the Eastern Pacific ITCZ-Cold Tongue Complex

A statistically-based low-level cloud parameterization scheme is introduced, modified, and applied in the Flexible coupled General Circulation Model (FGCM-O). It is found that the low-level cloud scheme makes improved simulations of low-level cloud fractions and net surface shortwave radiation fluxes in the subtropical eastern oceans off western coasts in the model. Accompanying the improvement in the net surface shortwave radiation fluxes, the simulated distribution of SSTs is more reasonably asymmetrical about the equator in the tropical eastern Pacific, which suppresses, to some extent, the development of the double ITCZ in the model. Warm SST biases in the ITCZ north of the equator are more realistically reduced, too. But the equatorial cold tongue is strengthened and extends further westward, which reduces the precipitation rate in the western equatorial Pacific but increases it in the ITCZ north of the equator in the far eastern Pacific. It is demonstrated that the low-level cloud-radiation feedback would enhance the cooperative feedback between the equatorial cold tongue and the ITCZ. Based on surface layer heat budget analyses, it is demonstrated that the reduction of SSTs is attributed to both the thermodynamic cooling process modified by the increase of cloud fractions and the oceanic dynamical cooling processes associated with the strengthened surface wind in the eastern equatorial Pacific, but it is mainly attributed to oceanic dynamical cooling processes associated with the strengthening of surface wind in the central and western equatorial Pacific.

Low Temperature Performance Prediction Model of Cold-Filled SMA-13 Asphalt Mixture

Sets of cold-filled SMA-13 asphalt mixture were designed by means of orthogonal design method. The bending and low temperature creep tests of the cold-filled SMA-13 asphalt mixture were carried out. The related models of the fractal dimension and the road performance evaluation index including low temperature bending failure strain εB and bending strength RB are established by using fractal theory. The model can be used to predict the low temperature performance of cold-filled SMA-13 asphalt mixture according to the design gradation, which can reduce the test workload and improve the working efficiency, so as to provide the reference for engineering design.

Novel Cascade Refrigeration Cycle for Cold Supply Chain of COVID-19 Vaccines at Ultra-Low Temperature -80°C Using Ethane (R170) Based Hydrocarbon Pair

Several media report highlight on that the pharmaceutical companies require ultra-low temperatures -80°C to transport and store its COVID-19 vaccines. This research presents the thermodynamic analysis on cascade refrigeration system (CRS) with several refrigerant pairs which are R32/R170, R123/R170, R134a/R170, R404A/R170, R407c/R170, R410/R170, and the hydrocarbon (HC) refrigerant pair Propane/Ethane, namely R290/R170. Besides, the results of R22/R170 pair, which is not recommended to be used due to phase out of R22 as per Montréal Protocol, are included as base case to compare the novel hydrocarbon pairs in CRS and the old trend of refrigerant pairs. Thermodynamic properties of all these pairs were investigated and compared under different intermediate temperature used in CRS heat exchanger, which thermally connected both the Low and High temperature cycles (LTC) and (HTC). By applying the first law of thermodynamics, the coefficients of performance (COPs) and the specific power consumptions (SPC) in kW/TR are presented and compared. In addition, by applying the second law of thermodynamics the exergetic efficiencies were estimated. The results reveal the promising opportunity of using the HC pair (R290/R170). The minimum SPC in kW/TR is recorded for the pair R123/R170. One the other hand, the highest exegetic efficiency values are observed to be 40%, 38%, and 35% for the pairs R123/R170, R290/R170, and R134/R170, respectively. This research concludes that the HC pair (R290/R170) is highly recommended for CRS applications either to transport the COVID-19 or store it in cold storage rooms in hospitals and clinics. All precautionary measures should be carefully applied in design and operation of HC pair (R290/R170) due to its flammability hazard.

Properties and microstructure of Ti6Al4V by deformation accelerated low temperature plasma nitriding

An integrated low-temperature nitriding process was carried out for Ti6Al4V to investigateitseffect on microstructure and properties.The process was designed to enhance the nitriding kinetics in low-temperature（500℃） nitriding by deformation, and to strengthen Ti6Al4V alloybydispersionat the same time. Specimens of Ti6Al4V alloyweretreated through the process of solid solutionstrengthening-cold deformation-nitriding at 500℃. The white nitriding layeris formed after some time and then kept stable, changing little withthedeformationdegreeand time. The effect of aging on substrate is significant. Surface hardness and substrate hardnessincrease with deformation increasing. The construction was investigated by XRD.The surface nitridesare TiN, Ti2N, Ti4N3-Xand Ti3N1.29,and thenitridesin cross-section are Ti3N1.29and TiN0.3. The wear tests of specimens after nitriding, aging and deformation were carried out,andthetest data show that the nitrided pieces have the best wear resistance.

Design and Realization of Cold Disaster Early Warning System for Subtropics Aquaculture

By analyzing the subtropics aquaculture present situation,the necessity of the construction of cold disaster early warning system for subtropics aquaculture,the research goal and the duty were expounded. The system structure and the frame were introduced in detail. Several key questions and their solutions of the cold disaster early warning system for subtropics aquaculture were put forward.

Characteristics of Atmospheric Circulation Associated with Cold Surge Occurrences in East Asia:A Case Study During 2005/06 Winter

The characteristics of the upper-level circulation and thermodynamical properties for the period when two distinct cold surges broke out over East Asia during the 2005/06 winter are investigated. From early December 2005 to early January 2006, exceptionally cold weather lasted for approximately one month due to two successive cold surges that took place on 2 December 2005 and 2 January 2006, respectively. This study reveals that both involve the upper-tropospheric circulation, which induces the amplification and expansion of the surface Siberian high toward East Asia, but arose from different causes： the former is caused by the upper-level blocking originated from the North Pacific and the latter is caused by the upper-level wave train across the Eurasian Continent. In particular, it is suggested that the lower-tropospheric anomalous wind caused by upper-level circulation anomalies and a steep meridional temperature gradient amplified by phase-locked annual cycle combined to induce very strong cold advection in East Asia, which resulted in exceptionally cold weather that lasted for several weeks. The present results emphasize that the characteristics of the upper-tropospheric circulation can be considered as important precursors to cold surge occurrences in East Asia.

Role and Mechanism of Action of Exogenous Salicylic Acid and Sodium Molybdate in Improving Cold Tolerance of Bougainvillea glabra

This study was conducted to comprehensively evaluate the effects of salicylic acid and sodium molybdate on cold tolerance of an ornamental plant Bougainvillea glabra and to provide a theoretical guidance for landscape maintenance.B.glabra plants were treated with 0.5 mmol/L salicylic acid and 2.0 μmol/L alone or in combination,and then exposed to low temperature stress before physiological indices were measured.The results showed that all salicylic acid and sodium molybdate treatments reduced the relative conductivity and malondialdehyde( MDA) content of B.glabra to varying extents under the stress of low temperature,and more significant effect was achieved by using the two agents in combination.Oxygen free radicals production rate increased with decreasing temperature from 20 to 6 ℃,but declined with temperature decreasing from 3 to-3 ℃.The SOD activity of the control( CK) was significantly lower than that of other treatments at 0 and-3 ℃.The treatments with salicylic acid and sodium molybdate alone and in combination increased POD activity of B.glabra plants,especially at 0 ℃,as the POD activity of treatments T1,T2 and T3 was significantly higher than that of CK at 0 ℃.In addition,under low temperature stress,the contents of soluble sugar,starch and proline increased initially and decreased subsequently with temperature decreasing.The soluble sugar content at 3 ℃,starch and proline contents at 0 and-3 ℃ in treatments with salicylic acid and sodium molybdate alone and in combination were significantly higher than those of CK.All above results proved that salicylic acid and sodium molybdate are able to improve cold tolerance of B.glabra,and better effect can be achieved by using them together.

Influence of high deformation on the microstructure of low-carbon steel

Low-carbon steel sheets DC04 used in the automotive industry were subjected to cold rolling for thickness reduction from 20% to 89%. The desired thickness was achieved by successive reductions using a rolling mill. The influence of thickness reduction on the microstructure was studied by scanning electron microscopy. Microstructure evolution was characterized by the distortion of grains and the occurrence of the oriented grain structure for high cold work. A mechanism of grain restructuring for high cold work was described. The occurrence of voids was discussed in relation with cold work. The evolution of voids at the grain boundaries and inside the grains was also considered. To characterize the grain size, the Feret diameter was measured and the grain size distribution versus cold work was discussed. The chemical homogeneity of the sample was also analyzed.

Evaluation of Rice Seedling Tolerance to Constant and Intermittent Low Temperature Stress

M202, IR50 and advanced backcross （BC4F6） lines carrying the cold tolerance QTLs qCTS4 and qCTS12 were evaluated using three low temperature stress assays （constant, intermittent and constant with recovery period）. Under constant stress, two BC4F6 lines （MIb 4853-9 and MIb 6885-2） exhibited differences in seedling growth and accumulation of stress-related compounds although both carry the two QTLs in the IRS0 background. Differences between these lines were also observed in the constant with recovery period assay, although both of them performed comparably under intermittent stress, MIb 6885-2 performed more similarly to M202 in the constant and constant with recovery period assays, suggesting that this line contains an introgressed region（s） not present in MIb 4853-9. The three assays were also applied to assess variations in cold tolerance in a set of diverse germplasms. Performance metrics and visual ratings were comparable for evaluating tolerance to constant stress. However, differences in response to intermittent stress were more evident from growth and total chlorophyll measurements than from visual ratings. With regard to the constant with recovery period assay, about 15% of the germplasm accessions did not recover. However, some lines which exhibited chilling injuries of comparable severity were able to overcome them. This recovery phenotype may improve rice performance in the field and warrant further investigation.

Identification and Evaluation of Cold Tolerance in Bitter Gourd (Momordica charantia L.) at Bud and Seedling Stages under Different Temperature Conditions

[ Objectives] This study was conducted to screen the temperature index most suitable for identification of cold tolerance in bitter gourd （Momordica charantia L. ） at bud and seedling stages. [ Methods] With six different bitter gourd germplasms as experimental materials, the cold tolerance at bud and seedling stages were identified and evaluated. [ Results] At 18℃ , the largest change range of germination potential among different gernlplasms was 11.3% -96.0%, and the largest change range of germination rate was 13.3% - 100.0% ; and the six germplasms could be divided into three grades of cold tolerance. Therefore, 18 9C is an ideal temperature for the identification of cold tolerance in bitter gourd germplasms at bud stage. At 20℃, the cold tolerance in bitter gourd germplasms at bud stage could also be divided into three grades, and the change ranges of germination potential and germination rate were larger than 50.0%, so 20℃ could serve as the candidate temperature for the identification of cold tolerance in bitter gourd germplasms at bud stage. After 1 d of treatment at 6℃, the six bitter gourd germplasms could be divided into three grades, and the cold injury index had the largest range of 20.31 - 84.38 and could serve as the temperature index for the identification of cold tolerance in bitter gourd at seedling stage. [ Conclusions] This study will provide reference for the identification of cold tolerance in bitter gourd at bud stage and seedling stage.