Mapping and measuring urban-rural inequalities in accessibility to social infrastructures

Equal access to social infrastructures is a fundamental prerequisite for sustainable development,but has long been a great challenge worldwide.Previous studies have primarily focused on the accessibility to social infras-tructures in urban areas across various scales,with less attention to rural areas,where inequality can be more severe.Particularly,few have investigated the disparities of accessibility to social infrastructures between urban and rural areas.Here,using the Changsha-Zhuzhou-Xiangtan urban agglomeration,China,as an example,we investigated the inequality of accessibility in both urban and rural areas,and further compared the urban-rural difference.Accessibility was measured by travel time of residents to infrastructures.We selected four types of social infrastructures including supermarkets,bus stops,primary schools,and health care,which were funda-mentally important to both urban and rural residents.We found large disparities in accessibility between urban and rural areas,ranging from 20 min to 2 h.Rural residents had to spend one to two more hours to bus stops than urban residents,and 20 min more to the other three types of infrastructures.Furthermore,accessibility to multiple infrastructures showed greater urban-rural differences.Rural residents in more than half of the towns had no access to any infrastructure within 15 min,while more than 60%of the urban residents could access to all infrastructures within 15 min.Our results revealed quantitative accessibility gap between urban and rural areas and underscored the necessity of social infrastructures planning to address such disparities.

Spatial Distribution Pattern and Influencing Factors of Bed-and-breakfasts(B&Bs)from the Perspective of Urban-rural Differences:A Case Study of Jiaodong Peninsula,China

There are significant differences between urban and rural bed-and-breakfasts(B&Bs)in terms of customer positioning,economic strength and spatial carrier.Accurately identifying the differences in spatial characteristics and influencing factors of each type,is essential for creating urban and rural B&B agglomeration areas.This study used density-based spatial clustering of applications with noise(DBSCAN)and the multi-scale geographically weighted regression(MGWR)model to explore similarities and differences in the spatial distribution patterns and influencing factors for urban and rural B&Bs on the Jiaodong Peninsula of China from 2010 to 2022.The results showed that:1)both urban and rural B&Bs in Jiaodong Peninsula went through three stages:a slow start from 2010 to 2015,rapid development from 2015 to 2019,and hindered development from 2019 to 2022.However,urban B&Bs demonstrated a higher development speed and agglomeration intensity,leading to an increasingly evident trend of uneven development between the two sectors.2)The clustering scale of both urban and rural B&Bs continued to expand in terms of quantity and volume.Urban B&B clusters characterized by a limited number,but a higher likelihood of transitioning from low-level to high-level clusters.While the number of rural B&B clusters steadily increased over time,their clustering scale was comparatively lower than that of urban B&Bs,and they lacked the presence of high-level clustering.3)In terms of development direction,urban B&B clusters exhibited a relatively stable pattern and evolved into high-level clustering centers within the main urban areas.Conversely,rural B&Bs exhibited a more pronounced spatial diffusion effect,with clusters showing a trend of multi-center development along the coastline.4)Transport emerged as a common influencing factor for both urban and rural B&Bs,with the density of road network having the strongest explanatory power for their spatial distribution.In terms of differences,population agglomeration had a positive impact on the distribution of urban B&Bs and a negative effect on the distribution of rural B&Bs.Rural B&Bs clustering was more influenced by tourism resources compared with urban B&Bs,but increasing tourist stay duration remains an urgent issue to be addressed.The findings of this study could provide a more precise basis for government planning and management of urban and rural B&B agglomeration areas.

Spatial pattern of urban-rural integration in China and the impact of geography

Urban-rural integration (URI) is a global challenge that is highly related to inequalities, poverty, economic growth, and other Sustainable Development Goals (SDGs). Existing research has evaluated the extent of URI and explored its influencing factors, but urban-rural linkages are seldom incorporated in evaluation systems, and geographical factors are rarely recognized as the influencing factors. We construct a URI framework including regional economy, rural development, urban-rural linkage, and urban-rural gap. Based on a dataset consisting of 1,669 counties in China in 2020, we reveal the spatial pattern of URI and find a high correlation between the spatial pattern of URI and the relief degree of land surface (RDLS). Using structural equation modeling, we discover that topography has direct ( − 0.18, p < 0.001) and indirect ( − 0.17, p < 0.001) effects on URI. The indirect negative effects are mediated through the infrastructure, and the combination of localized advantages and modern technical conditions could mitigate the negative impact of topography. Finally, we identify 742 counties as lagging regions in URI, which can be clustered into eight types. Our findings could facilitate policy designing for those countries striving for integrated and sustainable development of urban and rural areas.

Evolutionary Decision-Making and Planning for Autonomous Driving Based on Safe and Rational Exploration and Exploitation

Decision-making and motion planning are extremely important in autonomous driving to ensure safe driving in a real-world environment.This study proposes an online evolutionary decision-making and motion planning framework for autonomous driving based on a hybrid data-and model-driven method.First,a data-driven decision-making module based on deep reinforcement learning(DRL)is developed to pursue a rational driving performance as much as possible.Then,model predictive control(MPC)is employed to execute both longitudinal and lateral motion planning tasks.Multiple constraints are defined according to the vehicle’s physical limit to meet the driving task requirements.Finally,two principles of safety and rationality for the self-evolution of autonomous driving are proposed.A motion envelope is established and embedded into a rational exploration and exploitation scheme,which filters out unreasonable experiences by masking unsafe actions so as to collect high-quality training data for the DRL agent.Experiments with a high-fidelity vehicle model and MATLAB/Simulink co-simulation environment are conducted,and the results show that the proposed online-evolution framework is able to generate safer,more rational,and more efficient driving action in a real-world environment.

Spatiotemporal Evolution and Influencing Factors of Urban-rural Construction Land in Rural Industrialized Areas in China:Case Studies in Changyuan City and Xinxiang County of Henan Province

Since China’s reform and opening up in 1978,the acceleration of industrialization and urbanization in China had led to dramatic changes in the pattern of urban-rural land use.In this paper,we focused on the rural industrialized areas in central China(Xinxiang County and Changyuan City of Henan Province).We used the average nearest neighbor index,spatial statistical analysis,and a structural equation model to analyze the spatiotemporal evolution and influencing factors of urban-rural construction land based on multisource spatial data and survey data.The results showed that:1)from 1975 to 2019,the spatial distribution of urban-rural construction land in rural industrialized areas had evolved from homogeneous distribution to local agglomeration.In terms of comparative analysis of cases,the spatial distribution of urban-rural construction land in Changyuan City had shown a trend from diffusion to agglomeration,and Xinxiang County had overall shown a spatial change from homogenization to agglomeration and then to regional integration development.2)The hot spots with increased urban-rural construction land significantly expanded,and they had a high degree of spatial overlap with industrial development.Among them,Xinxiang County was concentrated in central and marginal areas,and Changyuan was mainly concentrated in central urban areas.3)From the evolution of spatial proximity of urban-rural construction land,rural industrialized areas generally decline,showing the characteristics of internal differentiation in the rate of change.4)Industrial development,social economy,the policy environment,and urban development played a positive role in promoting the expansion of urban-rural construction land in rural industrialized areas.To promote the optimal use of regional land and the integrated development of urban-rural areas,we should combine the advantages of regional endowment,formulate development strategies according to local conditions,and adjust the way that land is used in a timely manner.

A new approach towards the sustainability of urban-rural integration:The development strategy for central villages in the Abbasiya District of Iraq using GIS techniques

The development of rural areas usually has a positive impact on the urban-rural integration. This study explores an innovative approach to stimulate rural development by proposing qualified villages as central villages that can provide basic urban services for their residents and residents of neighboring villages. This approach can contribute to overcoming the various problems that rural areas faced at the social, economic, and environmental levels. It seeks to achieve spatial sustainability of rural areas, representing a new approach by integrating urban development methods to revitalize rural villages. The study analyzed 15 villages belonging to Abbasiya District of AL Kufa City in the Najaf Governorate of Iraq. Based on the GIS techniques and the analysis of urban service indicators(village population, percentage of urban building materials used in villages, distance between village and health centers, distance between village and main roads, nature of economic activity, distance between village and educational institutions, distance between village and drinking water sources, number of communication towers, and distance between village and urban administrative center), this study proposed that Abu Gharb and Albu Ghraib can served as central villages in Abbasiya District in the future. This study establishes a new rural spatial structure to achieve rural sustainable development, improves the development status of rural areas, and provides a theoretical basis for the government and relevant institutions to use urban service indicators, achieving rural sustainable development and formulating relevant development policies in Abbasiya District.

Thinking about Value Realization of Ecological Products under the Background of Urban-rural Integration in Chengdu“Western Control”Area

Chengdu's development strategy of“western control”has laid a solid ecological background for 8 western districts,cities and counties and cultivated good ecological resources.The integrated urban-rural development in the new era will realize the balanced development of urban and rural areas and give full play to the value of rural ecological resources through the“powerful combination”of urban and rural areas.To realize the urban-rural integration and high-quality rural development in Chengdu“western control”area,it is necessary to enhance the awareness of ecological resources and ecological products,and carry out unified planning of ecological infrastructure,ecological material products and ecological service products in the whole“western control”area.Meantime,ecological restoration must be carried out scientifically,and scene design for value transformation of ecological products should be implemented innovatively.

Overall Planning of Development of Urban-Rural Areas:A Policy Mechanism for Urban-Rural Coordinated Growth

While analyzing overall planning and coordinated development of urban-rural areas, this paper shows that overall planning for the development of urban-rural areas is a requirement for the best use of productive forces. It means the setting up of a policy mechanism for coordinated growth. Recognizing this, the government should set up a way to lead and manage a unified program to increase service and decrease controlling administration power, while safeguarding and fulfilling the farmers' ownership to the means of production.

Optimal search path planning of UUV in battlefeld ambush scene

Aiming at the practical application of Unmanned Underwater Vehicle(UUV)in underwater combat,this paper proposes a battlefield ambush scene with UUV considering ocean current.Firstly,by establishing these mathematical models of ocean current environment,target movement,and sonar detection,the probability calculation methods of single UUV searching target and multiple UUV cooperatively searching target are given respectively.Then,based on the Hybrid Quantum-behaved Particle Swarm Optimization(HQPSO)algorithm,the path with the highest target search probability is found.Finally,through simulation calculations,the influence of different UUV parameters and target parameters on the target search probability is analyzed,and the minimum number of UUVs that need to be deployed to complete the ambush task is demonstrated,and the optimal search path scheme is obtained.The method proposed in this paper provides a theoretical basis for the practical application of UUV in the future combat.

Efficient Route Planning for Real-Time Demand-Responsive Transit

Demand Responsive Transit (DRT) responds to the dynamic users’ requests without any fixed routes and timetablesand determines the stop and the start according to the demands. This study explores the optimization of dynamicvehicle scheduling and real-time route planning in urban public transportation systems, with a focus on busservices. It addresses the limitations of current shared mobility routing algorithms, which are primarily designedfor simpler, single origin/destination scenarios, and do not meet the complex demands of bus transit systems. Theresearch introduces an route planning algorithm designed to dynamically accommodate passenger travel needsand enable real-time route modifications. Unlike traditional methods, this algorithm leverages a queue-based,multi-objective heuristic A∗ approach, offering a solution to the inflexibility and limited coverage of suburbanbus routes. Also, this study conducts a comparative analysis of the proposed algorithm with solutions based onGenetic Algorithm (GA) and Ant Colony Optimization Algorithm (ACO), focusing on calculation time, routelength, passenger waiting time, boarding time, and detour rate. The findings demonstrate that the proposedalgorithmsignificantly enhances route planning speed, achieving an 80–100-fold increase in efficiency over existingmodels, thereby supporting the real-time demands of Demand-Responsive Transportation (DRT) systems. Thestudy concludes that this algorithm not only optimizes route planning in bus transit but also presents a scalablesolution for improving urban mobility.

Motion Planning for Autonomous Driving with Real Traffic Data Validation

Accurate trajectory prediction of surrounding road users is the fundamental input for motion planning,which enables safe autonomous driving on public roads.In this paper,a safe motion planning approach is proposed based on the deep learning-based trajectory prediction method.To begin with,a trajectory prediction model is established based on the graph neural network(GNN)that is trained utilizing the INTERACTION dataset.Then,the validated trajectory prediction model is used to predict the future trajectories of surrounding road users,including pedestrians and vehicles.In addition,a GNN prediction model-enabled motion planner is developed based on the model predictive control technique.Furthermore,two driving scenarios are extracted from the INTERACTION dataset to validate and evaluate the effectiveness of the proposed motion planning approach,i.e.,merging and roundabout scenarios.The results demonstrate that the proposed method can lower the risk and improve driving safety compared with the baseline method.

Stochastic programming based coordinated expansion planning of generation,transmission,demand side resources,and energy storage considering the DC transmission system

With the increasing penetration of wind and solar energies,the accompanying uncertainty that propagates in the system places higher requirements on the expansion planning of power systems.A source-grid-load-storage coordinated expansion planning model based on stochastic programming was proposed to suppress the impact of wind and solar energy fluctuations.Multiple types of system components,including demand response service entities,converter stations,DC transmission systems,cascade hydropower stations,and other traditional components,have been extensively modeled.Moreover,energy storage systems are considered to improve the accommodation level of renewable energy and alleviate the influence of intermittence.Demand-response service entities from the load side are used to reduce and move the demand during peak load periods.The uncertainties in wind,solar energy,and loads were simulated using stochastic programming.Finally,the effectiveness of the proposed model is verified through numerical simulations.

Postpartum Family Planning at the Timbuktu Hospital in Mali

Introduction: Postpartum family planning is the prevention of pregnancies during the 12 months following childbirth. Few studies have been devoted to postpartum family planning in Mali. Our work will contribute to reducing unmet need for family planning. Objective: To study the use of contraceptive methods in the postpartum period in the obstetrics and gynecology unit of Timbuktu hospital. Materials and Methods: This was a descriptive and analytical cross-sectional study with prospective collection of data from January 1, 2022 to December 31, 2023. All women who gave birth having chosen and benefited from a contraceptive method were included. The statistical test used was the Fisher test with a significance threshold fixed at 5%. Results: The frequency of contraception in the postpartum period was 17.03%. The average age of clients was 26.14% with extremes of 14 and 45 years. They were paupiparous at 56.4% with an inter-birth interval of less than 12 months at 12.3%. More than half of the counseling (58.5%) was done during postnatal visits. The methods chosen were implants at 48.1%, injectable progestins at 21.3%, intrauterine device at 14.7%, miro-progestin pills at 13.5%, tubal ligation at 1 .4% and condoms at 1%. The regular follow-up rate was 51.1% of cases and 25.6% had no follow-up. Conclusion: The overall rate of postpartum family planning of 17.08% remains low. Improving FP staff skills will reduce unmet needs and contribute to increasing contraceptive prevalence in Timbuktu.

Heuristic Expanding Disconnected Graph:A Rapid Path Planning Method for Mobile Robots

Existing mobile robots mostly use graph search algorithms for path planning,which suffer from relatively low planning efficiency owing to high redundancy and large computational complexity.Due to the limitations of the neighborhood search strategy,the robots could hardly obtain the most optimal global path.A global path planning algorithm,denoted as EDG*,is proposed by expanding nodes using a well-designed expanding disconnected graph operator(EDG)in this paper.Firstly,all obstacles are marked and their corners are located through the map pre-processing.Then,the EDG operator is designed to find points in non-obstruction areas to complete the rapid expansion of disconnected nodes.Finally,the EDG*heuristic iterative algorithm is proposed.It selects the candidate node through a specific valuation function and realizes the node expansion while avoiding collision with a minimum offset.Path planning experiments were conducted in a typical indoor environment and on the public dataset CSM.The result shows that the proposed EDG*reduced the planning time by more than 90%and total length of paths reduced by more than 4.6%.Compared to A*,Dijkstra and JPS,EDG*does not show an exponential explosion effect in map size.The EDG*showed better performance in terms of path smoothness,and collision avoidance.This shows that the EDG*algorithm proposed in this paper can improve the efficiency of path planning and enhance path quality.

A Planning Method for Operational Test of UAV Swarm Based on Mission Reliability

The unmanned aerial vehicle(UAV)swarm plays an increasingly important role in the modern battlefield,and the UAV swarm operational test is a vital means to validate the combat effectiveness of the UAV swarm.Due to the high cost and long duration of operational tests,it is essential to plan the test in advance.To solve the problem of planning UAV swarm operational test,this study considers the multi-stage feature of a UAV swarm mission,composed of launch,flight and combat stages,and proposes a method to find test plans that can maximize mission reliability.Therefore,a multi-stage mission reliability model for a UAV swarm is proposed to ensure successful implementation of the mission.A multi-objective integer optimization method that considers both mission reliability and cost is then formulated to obtain the optimal test plans.This study first constructs a mission reliability model for the UAV swarm in the combat stage.Then,the launch stage and flight stage are integrated to develop a complete PMS(Phased Mission Systems)reliability model.Finally,the Binary Decision Diagrams(BDD)and Multi Objective Quantum Particle Swarm Optimization(MOQPSO)methods are proposed to solve the model.The optimal plans considering both reliability and cost are obtained.The proposed model supports the planning of UAV swarm operational tests and represents a meaningful exploration of UAV swarm test planning.

A Reverse Path Planning Approach for Enhanced Performance of Multi-Degree-of-Freedom Industrial Manipulators

In the domain of autonomous industrial manipulators,precise positioning and appropriate posture selection in path planning are pivotal for tasks involving obstacle avoidance,such as handling,heat sealing,and stacking.While Multi-Degree-of-Freedom(MDOF)manipulators offer kinematic redundancy,aiding in the derivation of optimal inverse kinematic solutions to meet position and posture requisites,their path planning entails intricate multiobjective optimization,encompassing path,posture,and joint motion optimization.Achieving satisfactory results in practical scenarios remains challenging.In response,this study introduces a novel Reverse Path Planning(RPP)methodology tailored for industrial manipulators.The approach commences by conceptualizing the manipulator’s end-effector as an agent within a reinforcement learning(RL)framework,wherein the state space,action set,and reward function are precisely defined to expedite the search for an initial collision-free path.To enhance convergence speed,the Q-learning algorithm in RL is augmented with Dyna-Q.Additionally,we formulate the cylindrical bounding box of the manipulator based on its Denavit-Hartenberg(DH)parameters and propose a swift collision detection technique.Furthermore,the motion performance of the end-effector is refined through a bidirectional search,and joint weighting coefficients are introduced to mitigate motion in high-power joints.The efficacy of the proposed RPP methodology is rigorously examined through extensive simulations conducted on a six-degree-of-freedom(6-DOF)manipulator encountering two distinct obstacle configurations and target positions.Experimental results substantiate that the RPP method adeptly orchestrates the computation of the shortest collision-free path while adhering to specific posture constraints at the target point.Moreover,itminimizes both posture angle deviations and joint motion,showcasing its prowess in enhancing the operational performance of MDOF industrial manipulators.

Ground threat prediction-based path planning of unmanned autonomous helicopter using hybrid enhanced artificial bee colony algorithm

Unmanned autonomous helicopter(UAH)path planning problem is an important component of the UAH mission planning system.Aiming to reduce the influence of non-complete ground threat information on UAH path planning,a ground threat prediction-based path planning method is proposed based on artificial bee colony(ABC)algorithm by collaborative thinking strategy.Firstly,a dynamic threat distribution probability model is developed based on the characteristics of typical ground threats.The dynamic no-fly zone of the UAH is simulated and established by calculating the distribution probability of ground threats in real time.Then,a dynamic path planning method for UAH is designed in complex environment based on the real-time prediction of ground threats.By adding the collision warning mechanism to the path planning model,the flight path could be dynamically adjusted according to changing no-fly zones.Furthermore,a hybrid enhanced ABC algorithm is proposed based on collaborative thinking strategy.The proposed algorithm applies the leader-member thinking mechanism to guide the direction of population evolution,and reduces the negative impact of local optimal solutions caused by collaborative learning update strategy,which makes the optimization performance of ABC algorithm more controllable and efficient.Finally,simulation results verify the feasibility and effectiveness of the proposed ground threat prediction path planning method.

Correlates of Mistimed Pregnancy and Unmet Need for Family Planning among Women of Reproductive Age in Sandema, Ghana

Background: Globally, an estimated 80 million unintended pregnancies comprising both mistimed and unwanted pregnancies are recorded yearly. Yet only half of the women at risk of mistimed pregnancy use contraceptives. In developing countries, over 100 million females have unmet need, and national surveys in Ghana indicate 23% unmet need rate. Methods: Using a cross-sectional community-based approach, a sample size of 300 women of reproductive age were selected using multi-step cluster sampling techniques. The study was quantitative, using structured interviewer-administered questionnaires. Results: Two-third (66%) of the women in reproductive age still had unmet need, 71% were currently pregnant, and more than a third (36%) confirmed ever having a mistimed pregnancy. Fifty-three percent (53%) of the women confirmed never communicating with their partners on family planning issues, a little below half (45%) took their own health care decisions. Seventy nine percent (79%) ever received family planning services from a health professional. Factors related to unmet needs included mistimed pregnancy, level of education, preferred birth/pregnancy interval, communication between partners and the autonomy to spend self-earnings. Conclusion: Considering that high rates of unmet need results in mistimed pregnancy, improved policies around the influence of unmet need on mistimed pregnancies are needed.

Trajectory planning for multi-robot coordinated towing system based on stability

Given the unconstrained characteristics of the multi-robot coordinated towing system,the rope can only provide a unidirectional constraint force to the suspended object,which leads to the weak ability of the system to resist external disturbances and makes it difficult to control the trajectory of the suspended object.Based on the kinematics and statics of the multi-robot coordinated towing system with fixed base,the dynamic model of the system is established by using the Newton-Euler equations and the Udwadia-Kalaba equations.To plan the trajectories with high stability and strong control,trajectory planning is performed by combining the dynamics and stability of the towing system.Based on the dynamic stability of the motion trajectory of the suspended object,the stability of the suspended object is effectively improved through online real-time planning and offline manual adjustment.The effectiveness of the proposed method is verified by comparing the motion stability of the suspended object before and after planning.The results provide a foundation for the motion planning and coordinated control of the towing system.

Safe Motion Planning and Control Framework for Automated Vehicles with Zonotopic TRMPC

Model mismatches can cause multi-dimensional uncertainties for the receding horizon control strategies of automated vehicles(AVs).The uncertainties may lead to potentially hazardous behaviors when the AV tracks ideal trajectories that are individually optimized by the AV's planning layer.To address this issue,this study proposes a safe motion planning and control(SMPAC)framework for AVs.For the control layer,a dynamic model including multi-dimensional uncertainties is established.A zonotopic tube-based robust model predictive control scheme is proposed to constrain the uncertain system in a bounded minimum robust positive invariant set.A flexible tube with varying cross-sections is constructed to reduce the controller conservatism.For the planning layer,a concept of safety sets,representing the geometric boundaries of the ego vehicle and obstacles under uncertainties,is proposed.The safety sets provide the basis for the subsequent evaluation and ranking of the generated trajectories.An efficient collision avoidance algorithm decides the desired trajectory through the intersection detection of the safety sets between the ego vehicle and obstacles.A numerical simulation and hardware-in-the-loop experiment validate the effectiveness and real-time performance of the SMPAC.The result of two driving scenarios indicates that the SMPAC can guarantee the safety of automated driving under multi-dimensional uncertainties.