A Study on Theoretical Model and Applied Evaluation of Land Use Performance of High-tech Zone in Urban Fringe: A Case Study in Haidian District, Beijing

High-tech industrial zone is an important carrier for constructing innovative cities. It also plays an important role in implementing the national independent innovative strategy. How-ever, most of the high-tech industrial zones have many problems in their development process, such as efficiency of land use, weakness of oriented function and lack of land intensive. To solve these problems, the authors of this paper introduced the concept of land use performance and established the theoretical model to assess the land use performance of high-tech industrial zones. The model consists of the following three-dimensional parts: land use benefit, land use efficiency and innovative function. Based on this theory model, an index system which was composed of three secondary indictors, eight tertiary indictors and 37 fourth-grade indictors was set up to evaluate the land use performance of high-tech zone. To avoid the defects of plus model and function model, the authors brought out a three-dimensional evaluation model to examine the index of the land use performance of the high-tech industrial parks, which equals to the evaluation indicator system of land use performance of high-tech zone based on the above research. The authors examined the land use performance of five different high-tech industrial parks in Haidian District, Beijing City. The results indicated that the indicator system per-forms better in the aspect of evaluating land use benefit, land use efficiency and function of the high-tech industrial zone compared with other models.

Evaluation of quantitative variation of secondary metabolites in Bergenia ciliata(Haw.)using high performance thin layer chromatography

Dear Editor： Therapeutically active metabolite contents in a med- icinal plant vary in nature, which may impact on its therapeutic efficacy. Bergenia （Saxifragaceae） is an evergreen perennial herb widely distributed in Central and East Asia with about 30 species reported worldwide. It grows at a range of altitudes from the Khasia hills at 400 feet to the temperate Himalayas from Kashmir to Bhutan at 7,000-10,000 feet. Its distribution over a wide range of altitudinal zones makes it a good candidate for studying variations in its metabolic profiles under different climatic conditions. Bergenin （C-glycoside of 4-O-methyl gallic acid） has been identified as a potent active secondary metabolite in Bergenia and other therapeutically active constituents including, among others, gallic acid （3,4,5 trihydroxybenzoic acid）, （＋） catechin, and gallicin （Fig. 1）.

Analysis of Effect of Zn(O,S) Buffer Layer Properties on CZTS Solar Cell Performance Using AMPS

The Cu2ZnSnS4 （CZTS）-based solar cell is numerically simulated by a one-dimensional solar cell simulation soft- ware analysis of microelectronic and photonic structures （AMPS-1D）. The device structure used in the simulation is Al/ZnO：Al/nZn（O,S）/pCZTS/Mo. The primary motivation of this simulation work is to optimize the composition in the ZnO1-xSx buffer layer, which would yield higher conversion efficiency. By varying S/（S＋O） ratio x, the conduction band offset （CBO） at CZTS/Zn（O,S） interface can range from -0.23 eV to 1.06eV if the full range of the ratio is considered. The optimal CBO of 0.23eV can be achieved when the ZnO1-xSx buffer has an S/（S＋O） ratio of 0.6. The solar cell efficiency first increases with increasing sulfur content and then decreases abruptly for x〉 0.6, which reaches the highest value of 17.55% by our proposed optimal sulfur content x= 0.6. Our results provide guidance in dealing with the ZnO1-xSx buffer layer deposition for high efficiency CZTS solar cells.

Fairness in Olympic sports:How can we control the increasing complexity of doping use in high performance sports?

With the Rio Olympics just a few months past,we remember the excitement,the incredible performances,and the controversies.As happens so often,the Olympic Games focus attention not only on athletic achievements but also on how athletes may reach ever-increasing levels of performance.Doping,medical

STUDY ON TRANSONIC CASCADE PERFORMANCE BY USE OF NEWLY BUILT FACILITY

Progress in computational fluid dynamics in the field of turbomachine cascades has increased recently the importance of the study by cascade wind tunnels to verify various newly introduced concepts. A transonic cascade wind tunnel test facility has been built for this purpose in the Department of Aeronautics, University of Tokyo. The system and operation of this facility will be explained in detail. The tunnel is of blowdown type, and can be run repeatedly at a short interval. Experimental cascade performances obtained by this facility as well as numerical results for cascades designed along new concepts are discussed.

Predicted High Thermoelectric Performance of Quasi-Two-Dimensional Compound GeAs Using First-Principles Calculations

The electronic structure of binary quasi-two-dimensional GeAs is investigated using first-principles calculations, and it is found that the anisotropic structure of the layered compound GeAs brings about the anisotropy of the transport properties. Meanwhile, the band structure of GeAs exhibits a relatively large dispersion near the valence-band maximum in the Z –V direction while it is rather flat in the Z –Γ direction, which is highly desirable for good thermoelectric performance. The calculated partial charge density distribution also reveals that GeAs possesses anisotropic electrical conductivity. Based on the semi-classical Boltzmann transport theory, the anisotropic transport properties are observed, and the optimal doping concentrations are estimated. The temperature dependence transport properties of p-type GeAs are compared with the experimental data in good agreement, and the theoretical figure-of-merit ZT has been predicted as well.

Determination of Chromate Ion in Water Using High Performance Capillary Electrophoresis

A new rapid method for the analysis of chromate ion in water by using high performance capillary electrophoresis is described. The detection limit is 1.0 mu g/ml by using 100 m mol/l Tris-HCl buffer containing 2 m mol/l 1,6-hexanediamine which was used as an electroosmosis modifier to improve the separation and detection sensitivity.

Project-based Learning （PBL） for Enhancing Chinese College Students＇ English Performance

Project-based learning （PBL） as an instructional approach focuses on student-centeredness through contextualizing learning by presenting students with real world issues and practices that aim at achieving enduring learning effects. As a challenge to traditional lecture-based instruction, PBL may generate positive backwash assessment effects via documenting the process of developing authentic language skills. These skills-oriented outcomes are achieved through proper curricula in appropriate learning situations via various dimensions. However, problems may occur such as management, pressure from administration, evaluation doing their selected projects. teacher/student attitude, class size and proper group process and criteria, and students＇ likely frustrations in

Remaining useful life prognostics for aeroengine based on superstatistics and information fusion

Remaining useful life（RUL） prognostics is a fundamental premise to perform conditionbased maintenance（CBM） for a system subject to performance degradation. Over the past decades,research has been conducted in RUL prognostics for aeroengine. However, most of the prognostics technologies and methods simply base on single parameter, making it hard to demonstrate the specific characteristics of its degradation. To solve such problems, this paper proposes a novel approach to predict RUL by means of superstatistics and information fusion. The performance degradation evolution of the engine is modeled by fusing multiple monitoring parameters, which manifest non-stationary characteristics while degrading. With the obtained degradation curve,prognostics model can be established by state-space method, and then RUL can be estimated when the time-varying parameters of the model are predicted and updated through Kalman filtering algorithm. By this method, the non-stationary degradation of each parameter is represented, and multiple monitoring parameters are incorporated, both contributing to the final prognostics. A case study shows that this approach enables satisfactory prediction evolution and achieves a markedly better prognosis of RUL.

Performance analysis of source ranging by use of virtual receiver technique under different frequency bands

The traditional matched field processing localization need complicated computation to get the replica field and has high dependence on environment parameters and acoustic field model. To overcome the shortcoming, virtual receiver technique is used for source ranging. A virtual receiver is constructed by correlating the two signals of the guide source and the objective source received by a vertical line array. Then, the slope of the interference striation of the virtual field is estimated using relevant signal processing method. Combining with the waveguide invariant/3, the range of the objective source is determined. Through the numerical simulations and data processing collected from the experiment carried out in the South China Sea in 2004, the virtual receiver technique for broadband source ranging under the slope- bottom shallow water environment is discussed. As the frequency increases, the frequency bands should be broadened to obtain complete interference striation for good ranging results. In data processing, the receiving array spacing is too large to promise the orthogonality of the modes as the frequency increases and ranging results become worse.

Performance of passive target tracking using bearing-frequency and bearings of multiple arrays

Two target motion analysis (TMA) methods using multi-dimension information are studied, one is TMA with bearing-frequency and the other is TMA with multiple arrays. The optimization algorithm combining Gauss-Newton (G-N) method with Levenberg-Marquardt (L- M) method is applied to analyze the performance of target tracking with maximum likelihood estimation(MLE), and Monte Carlo experiments are presented. The results show that although the TMA with multi-dimension information have eliminated the maneuvers needed by conven- tional bearing-only TMA, but the application are not of universality

Using the system function to analyze the performance of transducer's impedance measurement method

Prom investigation of the advantages and disadvantages of conventional tri-voltage method,a method for the measurement of the transmitting transducer＇s impedance was presented to solve the difficult problem of examining the consistency of the transmitting phased array on the single-mode excitation sea spot.In the method based on the system function, the circuit structure of tri-voltage method was used but new parameters were measured.The principle of the method was given first.Then when resistors with different nominal values were used in the circuit,the measured results for the impedance of transducers were reported.The results were compared with the higher precision impedance analyzer.Finally,the error analysis was performed according to the impedance formula and the equivalent circuit parameters were fitted.Under the condition of guaranteeing the sampling precision,by performance analyzing, the resistor value in series was chosen relatively smaller than the impedance of transducer,the measurement of impedance could achieve the same precision as the higher precision impedance analyzer.Finally,the least squares curve-fitting of measured curves indicated that the transducer equivalent electrical parameters could be extracted accurately and used to design the matching network.

On acoustic performance for viscoelastic coating containing axisymmetric cavities using the multiple scattering method

A semi-analytical/numerical model based on the multiple scattering （MS） method has been established for analyzing the effect of acoustic performance on main energy attenua- tion mechanism in viscoelastic coating containing axisymmetric cavities. The basic functions of stress and displacement of the axisymmetric cavity surface are derived in the system of spheri- cal coordinates. The transition matrix between the incident wave and the scattering wave are obtained by the numerical integral of the basic functions of the cavity surface. The reflection, transmission and absorption performance of viscoelastic materials containing periodic cavities are calculated using the MS method and the wave propagating theory of the multi-layered medium. The results indicate that low frequency energy is mainly attenuated through cavity resonance. The resonant properties are found to be very sensitive to the boundary conditions. The coupling of the double-cavity is capable of extending the absorption to even lower fre- quencies. The absorption performance of the viscoelastic coating in the high frequency range is independent of the backing material. Its energy attenuation depends mainly on acoustic properties of cavity scattering and mode conversion.

How does map use differ in virtual reality and desktop-based environments?

Maps based on virtual reality(VR)are evolving and are being increasingly used in the field of geography.However,the advantages of VR based on the map use processes of users over desktop-based environments(DEs)are not fully understood.In this study,an experiment was conducted in which 120 participants performed map use tasks using maps and globes in VR and DE.The participants’eye movements and questionnaires were collected to compare the map use performance differences.We analyzed the general metrics,information searching and processing metrics of participants(e.g.response time,RT;average fixation duration,AFD;average saccade duration,ASD;saccade frequency,SF,etc.)using maps and globes in different environments.We found that the participants using VR processed information more efficiently(AFDDE=233.34 ms,AFDVR=173.09 ms),and the participants using DE had both a significantly shorter response time(RT_(DE)=88.68 s,RT_(VR)=124.05 s)and a shorter visual search time(ASD_(DE)=60.78 ms,ASD_(VR)=112.13 ms;SF_(DE)=6.30,SF_(VR)=2.07).We also found similarities in accuracy,satisfaction and readability.These results are helpful for designing VR maps that can adapt to human cognition and reflect the advantages of VR.