Mineral carbonation is a promising CO_(2) sequestration strategy that can utilize industrial wastes to convert CO_(2) into high-value CaCO_(3).This review summarizes the advancements in CO_(2) mineralization using typ...Mineral carbonation is a promising CO_(2) sequestration strategy that can utilize industrial wastes to convert CO_(2) into high-value CaCO_(3).This review summarizes the advancements in CO_(2) mineralization using typical industrial wastes to prepare ultrafine CaCO_(3).This work surveys the mechanisms of CO_(2) mineralization using these wastes and its capacities to synthesize CaCO_(3),evaluates the effects of carbonation pathways and operating parameters on the preparation of CaCO_(3),analyzes the current industrial application status and economics of this technology.Due to the large amount of impurities in solid wastes,the purity of CaCO_(3) prepared by indirect methods is greater than that prepared by direct methods.Crystalline CaCO_(3) includes three polymorphs.The polymorph of CaCO_(3) synthesized by carbonation process is determined the combined effects of various factors.These parameters essentially impact the nucleation and growth of CaCO_(3) by altering the CO_(2) supersaturation in the reaction system and the surface energy of CaCO_(3) grains.Increasing the initial pH of the solution and the CO_(2)flow rate favors the formation of vaterite,but calcite is formed under excessively high pH.Vaterite formation is favored at lower temperatures and residence time.With increased temperature and prolonged residence time,it passes through aragonite metastable phase and eventually transforms into calcite.Moreover,polymorph modifiers can decrease the surface energy of CaCO_(3) grains,facilitating the synthesis of vaterite.However,the large-scale application of this technology still faces many problems,including high costs,high energy consumption,low calcium leaching rate,low carbonation efficiency,and low product yield.Therefore,it is necessary to investigate ways to accelerate carbonation,optimize operating parameters,develop cost-effective agents,and understand the kinetics of CaCO_(3) nucleation and crystallization to obtain products with specific crystal forms.Furthermore,more studies on life cycle assessment(LCA)should be conducted to fully confirm the feasibility of the developed technologies.展开更多
Porous materials have promise as sound insulation, heat barrier, vibration attenuation, and catalysts. Most industrial solid wastes, such as tailings, coal gangue, and fly ash are rich in silicon. Additionally, a high...Porous materials have promise as sound insulation, heat barrier, vibration attenuation, and catalysts. Most industrial solid wastes, such as tailings, coal gangue, and fly ash are rich in silicon. Additionally, a high silicon content waste is a potential raw material for the syn- thesis of silicon-based, multi-porous materials such as zeolites, mesoporous silica, glass-ceramics, and geopolymer foams. Representative sil- icon-rich industrial solid wastes (SRISWs) are the focus of this mini review of the processing and application of porous silicon materials with respect to the physical and chemical properties of the SRISW. The transformation methods of preparing porous materials from SRISWs are summarized, and their research status in micro-, meso-, and macro-scale porous materials are described. Possible problems in the application of SRISWs and in the preparation of functional porous materials are analyzed, and their development prospects are discussed. This review should provide a typical reference for the recycling and use of industrial solid wastes to develop sustainable “green materials.”展开更多
Leather industry is an important light industry in China.Leather making requires a series of chemical treatment.Degreasing,unhairing and chrome tanning wastewaters are the main portions of tannery wastewater.Reclaimin...Leather industry is an important light industry in China.Leather making requires a series of chemical treatment.Degreasing,unhairing and chrome tanning wastewaters are the main portions of tannery wastewater.Reclaiming and reusing these wastewaters can eliminate 80% of COD,75% of BOD,95% of chromium and 93% of sulfuret,furthermore reduce environment impact,decrease treatment costs,save chemicals and water.Some application methods of wastewater reclamation and reuse for different operations were reported.The suitable reclamation and reuse technologies can enable leather making processes more rational,and realize the recovery and recycle of several chemicals in the tannery.Resourceful utilization of tannery wastewater should mate with renovating production technology,updating equipment,and must be guaranteed sufficiently by environmental protection measures.展开更多
Recycling industrial solid waste not only saves resources but also eliminates environmental concerns of toxic threats.Herein,we proposed a new strategy for the utilization of petrochemical-derived carbon black waste,a...Recycling industrial solid waste not only saves resources but also eliminates environmental concerns of toxic threats.Herein,we proposed a new strategy for the utilization of petrochemical-derived carbon black waste,a waste vanadium-bearing resource(V>30000 ppm(10−6)).Chemical leaching was employed to extract metallic vanadium from the waste and the leachate containing V was used as an alternative raw material for the fabrication of vanadate nanomaterials.Through the screening of various metal cations,it was found that the contaminated Na^(+)during the leaching process showed strong competitive coordination with the vanadium ions.However,by adding foreign Ce^(3+)and Y^(3+)cations,two rare-earth vanadates,viz.,flower-like CeVO_(4)and spherical YVO_(4)nanomaterials,were successfully synthesized.Characterization techniques such as scanning electron microscopy,transmission electron microscopy,X-ray diffraction,energy-dispersive X-ray spectroscopy,Fourier-transform infrared,and N2 physisorption were applied to analyze the physicochemical properties of the waste-derived nanomaterials.Importantly,we found that rare-earth vanadate catalysts exhibited good activities toward the semi-hydrogenation ofα,β-unsaturated aldehydes.The conversion of cinnamaldehyde and cinnamic alcohol selectivity were even higher than those of the common CeVO_(4)prepared using pure chemicals(67.2%vs.27.7%and 88.4%vs.53.5%).Our work provides a valuable new reference for preparing vanadate catalysts by the use of abundant vanadium-bearing waste resources.展开更多
基金support was received the Science&Technology Foundation of RIPP(PR20230092,PR20230259)the National Natural Science Foundation of China(22278419)the Key Core Technology Research(Social Development)Foundation of Suzhou(2023ss06).
文摘Mineral carbonation is a promising CO_(2) sequestration strategy that can utilize industrial wastes to convert CO_(2) into high-value CaCO_(3).This review summarizes the advancements in CO_(2) mineralization using typical industrial wastes to prepare ultrafine CaCO_(3).This work surveys the mechanisms of CO_(2) mineralization using these wastes and its capacities to synthesize CaCO_(3),evaluates the effects of carbonation pathways and operating parameters on the preparation of CaCO_(3),analyzes the current industrial application status and economics of this technology.Due to the large amount of impurities in solid wastes,the purity of CaCO_(3) prepared by indirect methods is greater than that prepared by direct methods.Crystalline CaCO_(3) includes three polymorphs.The polymorph of CaCO_(3) synthesized by carbonation process is determined the combined effects of various factors.These parameters essentially impact the nucleation and growth of CaCO_(3) by altering the CO_(2) supersaturation in the reaction system and the surface energy of CaCO_(3) grains.Increasing the initial pH of the solution and the CO_(2)flow rate favors the formation of vaterite,but calcite is formed under excessively high pH.Vaterite formation is favored at lower temperatures and residence time.With increased temperature and prolonged residence time,it passes through aragonite metastable phase and eventually transforms into calcite.Moreover,polymorph modifiers can decrease the surface energy of CaCO_(3) grains,facilitating the synthesis of vaterite.However,the large-scale application of this technology still faces many problems,including high costs,high energy consumption,low calcium leaching rate,low carbonation efficiency,and low product yield.Therefore,it is necessary to investigate ways to accelerate carbonation,optimize operating parameters,develop cost-effective agents,and understand the kinetics of CaCO_(3) nucleation and crystallization to obtain products with specific crystal forms.Furthermore,more studies on life cycle assessment(LCA)should be conducted to fully confirm the feasibility of the developed technologies.
基金National Natural Science Foundation of China(No.51774331)Funds for Nationsl&Local Joint Engineering Research Center of Mineral Salt Deep Utilization(No.SF202103).
文摘Porous materials have promise as sound insulation, heat barrier, vibration attenuation, and catalysts. Most industrial solid wastes, such as tailings, coal gangue, and fly ash are rich in silicon. Additionally, a high silicon content waste is a potential raw material for the syn- thesis of silicon-based, multi-porous materials such as zeolites, mesoporous silica, glass-ceramics, and geopolymer foams. Representative sil- icon-rich industrial solid wastes (SRISWs) are the focus of this mini review of the processing and application of porous silicon materials with respect to the physical and chemical properties of the SRISW. The transformation methods of preparing porous materials from SRISWs are summarized, and their research status in micro-, meso-, and macro-scale porous materials are described. Possible problems in the application of SRISWs and in the preparation of functional porous materials are analyzed, and their development prospects are discussed. This review should provide a typical reference for the recycling and use of industrial solid wastes to develop sustainable “green materials.”
文摘Leather industry is an important light industry in China.Leather making requires a series of chemical treatment.Degreasing,unhairing and chrome tanning wastewaters are the main portions of tannery wastewater.Reclaiming and reusing these wastewaters can eliminate 80% of COD,75% of BOD,95% of chromium and 93% of sulfuret,furthermore reduce environment impact,decrease treatment costs,save chemicals and water.Some application methods of wastewater reclamation and reuse for different operations were reported.The suitable reclamation and reuse technologies can enable leather making processes more rational,and realize the recovery and recycle of several chemicals in the tannery.Resourceful utilization of tannery wastewater should mate with renovating production technology,updating equipment,and must be guaranteed sufficiently by environmental protection measures.
基金This work was supported by the National Natural Science Foundation of China(Grant Nos.U21A20324 and 21908073)the Natural Science Foundation of Fujian Province(Grant Nos.2019J01074 and 2021J06026)。
文摘Recycling industrial solid waste not only saves resources but also eliminates environmental concerns of toxic threats.Herein,we proposed a new strategy for the utilization of petrochemical-derived carbon black waste,a waste vanadium-bearing resource(V>30000 ppm(10−6)).Chemical leaching was employed to extract metallic vanadium from the waste and the leachate containing V was used as an alternative raw material for the fabrication of vanadate nanomaterials.Through the screening of various metal cations,it was found that the contaminated Na^(+)during the leaching process showed strong competitive coordination with the vanadium ions.However,by adding foreign Ce^(3+)and Y^(3+)cations,two rare-earth vanadates,viz.,flower-like CeVO_(4)and spherical YVO_(4)nanomaterials,were successfully synthesized.Characterization techniques such as scanning electron microscopy,transmission electron microscopy,X-ray diffraction,energy-dispersive X-ray spectroscopy,Fourier-transform infrared,and N2 physisorption were applied to analyze the physicochemical properties of the waste-derived nanomaterials.Importantly,we found that rare-earth vanadate catalysts exhibited good activities toward the semi-hydrogenation ofα,β-unsaturated aldehydes.The conversion of cinnamaldehyde and cinnamic alcohol selectivity were even higher than those of the common CeVO_(4)prepared using pure chemicals(67.2%vs.27.7%and 88.4%vs.53.5%).Our work provides a valuable new reference for preparing vanadate catalysts by the use of abundant vanadium-bearing waste resources.
