我们在二光子的过程从二模式的挤压的真空状态地在纠纷转移上调查空移动的影响到二个空间地分开的原子。我们的结果证明空移动在如此的纠纷转移起一个重要作用。我们发现当空移动参数 r 是小的时，在二个原子之间的纠纷的度与首先增加...我们在二光子的过程从二模式的挤压的真空状态地在纠纷转移上调查空移动的影响到二个空间地分开的原子。我们的结果证明空移动在如此的纠纷转移起一个重要作用。我们发现当空移动参数 r 是小的时，在二个原子之间的纠纷的度与首先增加压榨的参数 ξ
增加，并且在完成它的最大的价值以后，纠纷的度将与增加 ξ 减少到零；当时为大 r， E 将与增加 ξ
增加。展开更多
In this work,the solubility data and liquid-phase mass transfer coefficients of hydrogen(H2),methane(CH4)and their mixtures in vacuum gas oil(VGO)at temperatures(353.15-453.15 K)and pressures(1-7 MPa)were measured,whi...In this work,the solubility data and liquid-phase mass transfer coefficients of hydrogen(H2),methane(CH4)and their mixtures in vacuum gas oil(VGO)at temperatures(353.15-453.15 K)and pressures(1-7 MPa)were measured,which are necessary for catalytic cracking process simulation and design.The solubility of H2 and CH4 in VGO increases with the increase of pressure,but decreases with the increase of temperature.Henry’s constants of H2 and CH4 follow the relation of In H=-413.05/T+5.27 and In H=-990.67/T+5.87,respectively.The molar fractions of H2 and system pressures at different equilibrium time were measured to estimate the liquid-phase mass transfer coefficients.The results showed that with the increase of pressure,the liquid-phase mass transfer coefficients increase.Furthermore,the solubility of H2 and CH4 in VGO was predicted by the predictive COSMO-RS model,and the predicted values agree well with experimental data.In addition,the gas-liquid equilibrium(GLE)for H2+CH4+VGO system at different feeding gas ratios in volume fraction(i.e.,H285%+CH415%and H290%+CH410%)was measured.The selectivity of H2 to CH4 predicted by the COSMO-RS model agrees well with experimental data.This work provides the basic thermodynamic and dynamic data for fuel oil catalytic cracking processes.展开更多
In this research, an innovative cylindrical automatic battery core oven was designed to avoid the structural deformation that frequently occurs in traditional ovens. The oven could be automatically connected with the ...In this research, an innovative cylindrical automatic battery core oven was designed to avoid the structural deformation that frequently occurs in traditional ovens. The oven could be automatically connected with the electrolyte injection process after baking, achieving improvement in a battery's baking consistency. This contributed to the feasibility of studying the internal heat conduction process of batch battery cores during actual baking processes. A mathematical model of a certain plate battery cell during the baking process was established. The simulation results of the temperature change inside the battery core during the baking process were consistent with the calculation results of the mathematical model. The temperature distribution at each point inside the battery core could be fitted through the thermal conductivity at different temperatures and the temperature distribution between the layers of the battery core.Finally, based on the thermodynamic balance energy conservation method, the relationship between the temperature change inside the battery core and the entire baking process was established. A feasible algorithm for studying the thermal conduction of complex material and internal structure objects in the baking process was obtained.展开更多
We have established a caesium double magneto-optical trap （MOT） system for cavity-QED experiment, and demonstrated the continuous transfer of cold caesium atoms from the vapour-cell MOT with a pressure of - 1 ×...We have established a caesium double magneto-optical trap （MOT） system for cavity-QED experiment, and demonstrated the continuous transfer of cold caesium atoms from the vapour-cell MOT with a pressure of - 1 × 10^-6 Pa to the ultra-high-vacuum （UHV） MOT with a pressure of - 8 × 10^-8 Pa via a focused continuous-wave transfer laser beam. The effect of frequency detuning as well as the intensity of the transfer beam is systematically investigated, which makes the transverse cooling adequate before the atoms leak out of the vapour-cell MOT to reduce divergence of the cold atomic beam. The typical cold atomic flux got from vapour-cell MOT is - 2 × 10^7 atoms/s. About 5 × 10^6 caesium atoms are recaptured in the UHV MOT.展开更多
Curved coils constructed by flexible printed circuit board (PCB) or hand-wound Litz-wire have been steadily becoming popular due to its applicable potential on devices that have a curved body. Inductive Power Transfer...Curved coils constructed by flexible printed circuit board (PCB) or hand-wound Litz-wire have been steadily becoming popular due to its applicable potential on devices that have a curved body. Inductive Power Transfer (IPT) systems based on curved coils and flexible ferrite sheets may provide more flexible charging solutions for various electronic devices such as rice cookers and robot vacuum cleaners. Power repeaters are also used in IPT systems to extend wireless charging range by guiding magnetic fields to the receiving coil. The interaction of these three topics could be inspiring. In this paper, two adjustable power repeaters are applied to an IPT charging system with various curved receiving coils designed for vacuum cleaners. Two power repeaters share the identical structure as the Tx coil and could be rotated to mirror symmetrically. The input and output power are calculated by analyzing the equivalent circuit model. The self-inductance, mutual inductance, and coupling coefficient of the proposed system are obtained via finite element method simulation with variable rotating angles. Three typical IPT designs have also been simulated in ANSYS Maxwell and compared with the proposed magnetic design. The comparison indicates the enhancing feature of the passive power repeaters on coupling performance and the ability to guide the magnetic flux for better magnetic field coupling. Furthermore, two types of co-simulations defined by the power source via Simplorer are conducted to explore how much power could be transferred. The tuned system is shown to be able to provide about 32 W under 100 kHz operating frequency for charging the battery of a robot vacuum cleaner. The results from theoretical calculation and simulation align well with each other.展开更多
The article improves the quality of raw cotton by creating a new transfer device structure for the transportation of cotton in long-distance riots, located in the main building of the ginnery. Both foreign and domesti...The article improves the quality of raw cotton by creating a new transfer device structure for the transportation of cotton in long-distance riots, located in the main building of the ginnery. Both foreign and domestic separator cleaners have been studied. Experiments were carried out on prototype transfer device and the results were obtained. The cleaning efficiency was determined by sampling the cotton entering the separator in the moving device and exiting after the inclined vibrating mesh surface installed after the separator.展开更多
基金Supported by the National Natural Science Foundation of China(U1862103).
文摘In this work,the solubility data and liquid-phase mass transfer coefficients of hydrogen(H2),methane(CH4)and their mixtures in vacuum gas oil(VGO)at temperatures(353.15-453.15 K)and pressures(1-7 MPa)were measured,which are necessary for catalytic cracking process simulation and design.The solubility of H2 and CH4 in VGO increases with the increase of pressure,but decreases with the increase of temperature.Henry’s constants of H2 and CH4 follow the relation of In H=-413.05/T+5.27 and In H=-990.67/T+5.87,respectively.The molar fractions of H2 and system pressures at different equilibrium time were measured to estimate the liquid-phase mass transfer coefficients.The results showed that with the increase of pressure,the liquid-phase mass transfer coefficients increase.Furthermore,the solubility of H2 and CH4 in VGO was predicted by the predictive COSMO-RS model,and the predicted values agree well with experimental data.In addition,the gas-liquid equilibrium(GLE)for H2+CH4+VGO system at different feeding gas ratios in volume fraction(i.e.,H285%+CH415%and H290%+CH410%)was measured.The selectivity of H2 to CH4 predicted by the COSMO-RS model agrees well with experimental data.This work provides the basic thermodynamic and dynamic data for fuel oil catalytic cracking processes.
基金supported by the National Key Research and Development Program of China(No.2021YFC29003205)the National Natural Science Foundation of China(Nos.21878045,51504058)+1 种基金the Fundamental Research Funds for the Central Universities,China(No.N2225019)Natural Science Foundation of Liaoning Province,China(No.2022-MS-106)。
基金supported by Tianjin Science and Technology Support Project of China(Grant 14JCTPJC00532)
文摘In this research, an innovative cylindrical automatic battery core oven was designed to avoid the structural deformation that frequently occurs in traditional ovens. The oven could be automatically connected with the electrolyte injection process after baking, achieving improvement in a battery's baking consistency. This contributed to the feasibility of studying the internal heat conduction process of batch battery cores during actual baking processes. A mathematical model of a certain plate battery cell during the baking process was established. The simulation results of the temperature change inside the battery core during the baking process were consistent with the calculation results of the mathematical model. The temperature distribution at each point inside the battery core could be fitted through the thermal conductivity at different temperatures and the temperature distribution between the layers of the battery core.Finally, based on the thermodynamic balance energy conservation method, the relationship between the temperature change inside the battery core and the entire baking process was established. A feasible algorithm for studying the thermal conduction of complex material and internal structure objects in the baking process was obtained.
基金Project supported by the Natural Science Foundation of China （Grant Nos 60578018 10434080, and 10374062）, the Sino-Russia Joint Project （NSFC-RFBR）, by the Key Scientific Project of the Education Ministry of China （Grant No 204019）, the Cultivation Fund of the Key Scientific and Technical Innovation Project （Grant No 705010） and the Program for Innovative Research Team in University （IRT0516） from the Education Ministry of China, and also by the Research Funds for Youth Academic Leaders of Shanxi Province.
文摘We have established a caesium double magneto-optical trap （MOT） system for cavity-QED experiment, and demonstrated the continuous transfer of cold caesium atoms from the vapour-cell MOT with a pressure of - 1 × 10^-6 Pa to the ultra-high-vacuum （UHV） MOT with a pressure of - 8 × 10^-8 Pa via a focused continuous-wave transfer laser beam. The effect of frequency detuning as well as the intensity of the transfer beam is systematically investigated, which makes the transverse cooling adequate before the atoms leak out of the vapour-cell MOT to reduce divergence of the cold atomic beam. The typical cold atomic flux got from vapour-cell MOT is - 2 × 10^7 atoms/s. About 5 × 10^6 caesium atoms are recaptured in the UHV MOT.
文摘Curved coils constructed by flexible printed circuit board (PCB) or hand-wound Litz-wire have been steadily becoming popular due to its applicable potential on devices that have a curved body. Inductive Power Transfer (IPT) systems based on curved coils and flexible ferrite sheets may provide more flexible charging solutions for various electronic devices such as rice cookers and robot vacuum cleaners. Power repeaters are also used in IPT systems to extend wireless charging range by guiding magnetic fields to the receiving coil. The interaction of these three topics could be inspiring. In this paper, two adjustable power repeaters are applied to an IPT charging system with various curved receiving coils designed for vacuum cleaners. Two power repeaters share the identical structure as the Tx coil and could be rotated to mirror symmetrically. The input and output power are calculated by analyzing the equivalent circuit model. The self-inductance, mutual inductance, and coupling coefficient of the proposed system are obtained via finite element method simulation with variable rotating angles. Three typical IPT designs have also been simulated in ANSYS Maxwell and compared with the proposed magnetic design. The comparison indicates the enhancing feature of the passive power repeaters on coupling performance and the ability to guide the magnetic flux for better magnetic field coupling. Furthermore, two types of co-simulations defined by the power source via Simplorer are conducted to explore how much power could be transferred. The tuned system is shown to be able to provide about 32 W under 100 kHz operating frequency for charging the battery of a robot vacuum cleaner. The results from theoretical calculation and simulation align well with each other.
文摘The article improves the quality of raw cotton by creating a new transfer device structure for the transportation of cotton in long-distance riots, located in the main building of the ginnery. Both foreign and domestic separator cleaners have been studied. Experiments were carried out on prototype transfer device and the results were obtained. The cleaning efficiency was determined by sampling the cotton entering the separator in the moving device and exiting after the inclined vibrating mesh surface installed after the separator.
