A novel method to calculate the thrust of linear induction motor based on instantaneous current value

Because of the end effect, a linear induction motor （LIM） runs in an asymmetrical state even though the winding of each phase is symmetric. Based on the basic principle of the LIM, a new approach was proposed to calculate the thrust of the LIM using the instantaneous current value. A three-phase LIM model with 12 slots and a singlelayer winding was designed to validate this method. The experiments show that when the current is small, the calculated results basically agree with the experiments. The agreement becomes worse with the increase of the current because of the saturation of the primary iron core. The proposed formula is suitable when the iron core of the LIM primary is in an unsaturated state.

Studying the current properties of buffer solution through micro-fluidic channels driven with the pulse bias

In the research of bio-molecular chips and sensors, extra electric biases are most often employed to control and manipulate the DNA and protein molecules moving through micro/nano-fluidic channels. In order to accurately and flexibly control the bio-molecules as they move within the channels, a clear understanding of how the current changes within the buffer solution caused by an applied bias is fundamental. In this report, the current changed value of different buffer solutions, e.g., KC1, TE, and TBE was systematically studied with real-time monitoring and quantitative analysis in the situation of the buffers moving through a fluidic channel with a 5 μm inner diameter, driven by biases of 50 or 100 mV. The results revealed that the relation- ship between the current changed value and the pause interval of the applied electric field is highly consistent with the Hill Equation, which is helpful for accurately detecting and manipulating single biomolecules in microfluidic sensors and biochips.

A novel low voltage ride through strategy for cascaded power electronic transformer

In view of the operating characteristics for voltage sags of AC side of the power electronic transformer(PET),a low-voltage ride through(LVRT)strategy adapted to bidirectional power exchange of PET is proposed for the purposes of maintaining the system stability,assisting the system voltage recovery and protecting PET safety.During the asymmetric voltage sag,the negative sequence current of PET is eliminated to ensure the symmetry of the injected current.According to the degree of positive sequence voltage sag,the reactive current injection is provided to assist in voltage recovery.According to the PET active power condition before the voltage sag,the level and direction of which are maintained as far as possible without exceeding the limit,for which the disturbance to the AC and DC grids is reduced.Finally,the effectiveness of the proposed LVRT strategy is verified by simulation model.

Design and synthesis of low band gap non-fullerene acceptors for organic solar cells with impressively high J_(sc) over 21 m A cm^(-2)

Three low bandgap non-fullerene acceptors based on thieno[3,2-b]thiophene fused core with different ending groups, named TTIC-M, TTIC, TTIC-F were designed and synthesized. Using a wide bandgap polymer PBDB-T as donor to form a complementary absorption in the range of 300–900 nm, high efficencies of 9.97%, 10.87% and 9.51% were achieved for TTIC-M, TTIC and TTFC-F based photovoltaic devices with impressively high short circuit current over21 mA cm^-2.