Numerous studies have focused on the reduction thermodynamics of ordinary iron ore;by contrast, the literature contains few thermodynamic studies on the gas-based reduction of vanadium titano-magnetite (VTM) in mixed ...Numerous studies have focused on the reduction thermodynamics of ordinary iron ore;by contrast, the literature contains few thermodynamic studies on the gas-based reduction of vanadium titano-magnetite (VTM) in mixed atmospheres of H2, CO, H2O, CO2, and N2. In this paper, thermodynamic studies on the reduction of oxidized VTM pellets were systematically conducted in an atmosphere of a C–H–O system as a reducing agent. The results indicate that VTM of an equivalent valence state is more difficult to reduce than ordinary iron ore. A reduction equilibrium diagram using the C–H–O system as a reducing agent was obtained;it clearly describes the reduction process. Experiments were performed to investigate the effects of the reduction temperature, the gas composition, and two types of iron ores on the reduction of oxidized VTM pellets. The results show that the final reduction degree increases with increasing reduction temperature, increasing molar ratio of H2/(H2 + CO), and decreasing H2O, CO2, and N2 contents. In addition, the reduction processes under various conditions are discussed. All of the results of the reduction experiments are consistent with those of theoretical thermodynamic analysis. This study is expected to provide valuable thermodynamic theory on the industrial applications of VTM.展开更多
The effect of microwave treatment on the grinding and dissociation characteristics of vanadium titano-magnetite(VTM) ore were investigated using scanning electron microscopy(SEM), nitrogen absorption measurements, par...The effect of microwave treatment on the grinding and dissociation characteristics of vanadium titano-magnetite(VTM) ore were investigated using scanning electron microscopy(SEM), nitrogen absorption measurements, particle size distribution measurements, X-ray diffraction(XRD) analysis, Fourier transform infrared(FT-IR) spectroscopic analysis, and magnetic separation. SEM analysis showed that microfractures appeared in the microwave-treated VTM, which is attributed to the microwaves' selective heating characteristic and the differential expansion between minerals and gangues. Nitrogen absorption showed that the microfractures were more pronounced when the microwave heating time was increased. Particle size distribution analysis showed that microwave treatment could improve the grindability of the VTM, thus increasing the weight percent of the fine-ground product. The increase in grindability was more significant with prolonged heating time. Moreover, the particle size distribution of the fine-ground product changed only slightly after the microwave treatment. XRD analysis showed that the crystallinity of the microwave-treated VTM increased with increasing microwave heating time. The magnetic separation tests revealed that the separation efficiency increased as a result of the intergranular fractures generated by microwave treatment. The Fe grade of the magnetic fraction of microwave-treated VTM was 1.72% higher than that of the raw ore. We concluded that the microwave treatment was beneficial, especially for the mineral processing characteristics.展开更多
The reduction of vanadium titano-magnetite pellets by H_2-CO at temperatures from 850 to 1050°C was investigated in this paper. The influences of pre-oxidation treatment, reduction temperature, and V_（H_2）/（V_...The reduction of vanadium titano-magnetite pellets by H_2-CO at temperatures from 850 to 1050°C was investigated in this paper. The influences of pre-oxidation treatment, reduction temperature, and V_（H_2）/（V_（H_2） ＋ VCO） on the metallization degree were studied. The results showed that pre-oxidation played a substantial role in the reduction of vanadium titano-magnetite pellets. During the reduction process, the metallization degree increased with increasing temperature and increasing V_（H_2） /（V_（H_2） ＋ VCO）. The phase transformation of pre-oxidized vanadium titano-magnetite pellets during the reduction process under an H_2 atmosphere and a CO atmosphere was discussed, and the reduced samples were analyzed by scanning electron microscopy（SEM） in conjunction with back scatter electron（BSE） imaging. The results show that the difference in thermodynamic reducing ability between H_2 and CO is not the only factor that leads to differences in the reduction results obtained using different atmospheres. Some of Fe_（3-x）Ti_xO_4 cannot be reduced under a CO atmosphere because of the densification of particles＇ structure and because of the enrichment of Mg in unreacted cores. By contrast, a loose structure of particles was obtained when the pellets were reduced under an H_2 atmosphere and this structure decreased the resistance to gas diffusion. Moreover, the phenomenon of Mg enrichment in unreacted cores disappeared during H_2 reduction. Both the lower resistance to gas diffusion and the lack of Mg enrichment facilitated the reduction of vanadium titano-magnetite.展开更多
In order to provide a reliable reference for utilizing Indonesia vanadium titano-magnetite(VTM) in blast furnace(BF) economically, metallurgical properties of iron ore sinter with addition of Indonesia VTM in mixed si...In order to provide a reliable reference for utilizing Indonesia vanadium titano-magnetite(VTM) in blast furnace(BF) economically, metallurgical properties of iron ore sinter with addition of Indonesia VTM in mixed sintering materials were investigated, including low-temperature reduction degradation index(RDI), reducibility index(RI), and softening/melting properties. Additionally, influenced mechanism of Indonesia VTM on metallurgical properties of sinter was studied. It is found that adding Indonesia VTM in sintering process quickly increases the RDI of sinters, and decreases the RI from 78.02% to 68.43%. Moreover, both beginning temperature(T_4) and final temperature(TD) of softening/melting increase gradually, and cohesive zone temperature range(T_D–T_4) enlarges from 219 oC to 315 oC. As a result, the permeability of cohesive zone gets worse, which is proven by the higher maximum pressure drop(δPmax) in softening/melting experiments. It is concluded that, after comprehensively considering all metallurgical properties mentioned above, the proper proportion of Indonesia VTM in sintering process is proposed in the new raw materials conditions.展开更多
Vanadates are a class of the most promising electrochromic materials for displays as their multicolor characteristics.However,the slow switching times and vanadate dissolution issues of recently reported vanadates sig...Vanadates are a class of the most promising electrochromic materials for displays as their multicolor characteristics.However,the slow switching times and vanadate dissolution issues of recently reported vanadates significantly hinder their diverse practical applications.Herein,novel strategies are developed to design electrochemically stable vanadates having rapid switching times.We show that the interlayer spacing is greatly broadened by introducing sodium and lanthanum ions into V_(3)O_(8)interlayers,which facilitates the transportation of cations and enhances the electrochemical kinetics.In addition,a hybrid Zn^(2+)/Na^(+)electrolyte is designed to inhibit vanadate dissolution while significantly accelerating electrochemical kinetics.As a result,our electrochromic displays yield the most rapid switching times in comparison with any reported Zn-vanadate electrochromic displays.It is envisioned that stable vanadate-based electrochromic displays having video speed switching are appearing on the near horizon.展开更多
BiVO_(4)is one of the most promising photoanode materials for photoelectrochemical(PEC)solar energy conversion,but it still suffers from poor photocurrent density due to insufficient light‐harvesting efficiency(LHE),...BiVO_(4)is one of the most promising photoanode materials for photoelectrochemical(PEC)solar energy conversion,but it still suffers from poor photocurrent density due to insufficient light‐harvesting efficiency(LHE),weak photogenerated charge separation efficiency(Φ_(Sep)),and low water oxidation efficiency(Φ_(OX)).Herein,we tackle these challenges of the BiVO_(4)photoanodes using systematic engineering,including catalysis engineering,bandgap engineering,and morphology engineering.In particular,we deposit a NiCoO_(x)layer onto the BiVO_(4)photoanode as the oxygen evolution catalyst to enhance theΦ_(OX)of Fe‐g‐C_(3)N_(4)/BiVO_(4)for PEC water oxidation,and incorporate Fe‐doped graphite‐phase C_(3)N_(4)(Fe‐g‐C_(3)N_(4))into the BiVO_(4)photoanode to optimize the bandgap and surface areas to subsequently expand the light absorption range of the photoanode from 530 to 690 nm,increase the LHE andΦ_(Sep),and further improve the oxygen evolution reaction activity of the NiCoO_(x)catalytic layer.Consequently,the maximum photocurrent density of the as‐prepared NiCoO_(x)/Fe‐g‐C_(3)N_(4)/BiVO_(4)is remarkably boosted from 4.6 to 7.4 mA cm^(−2).This work suggests that the proposed systematic engineering strategy is exceptionally promising for improving LHE,Φ_(Sep),andΦ_(OX)of BiVO_(4)‐based photoanodes,which will substantially benefit the design,preparation,and large‐scale application of next‐generation high‐performance photoanodes.展开更多
Rechargeable aqueous zinc-ion batteries(AZIBs)have their unique advantages of cost efficiency,high safety,and environmental friendliness.However,challenges facing the cathode materials include whether they can remain ...Rechargeable aqueous zinc-ion batteries(AZIBs)have their unique advantages of cost efficiency,high safety,and environmental friendliness.However,challenges facing the cathode materials include whether they can remain chemically stable in aqueous electrolyte and provide a robust structure for the storage of Zn2+.Here,we report on H11Al2V6O23.2@graphene(HAVO@G)with exceptionally large layer spacing of(001)plane(13.36?).The graphene-wrapped structure can keep the structure stable during discharge/charge process,thereby promoting the inhibition of the dissolution of elements in the aqueous electrolyte.While used as cathode for AZIBs,HAVO@G electrode delivers ideal rate performance(reversible capacity of 305.4,276.6,230.0,201.7,180.6 mAh g?1 at current densities between 1 and 10 A g?1).Remarkably,the electrode exhibits excellent and stable cycling stability even at a high loading mass of^15.7 mg cm?2,with an ideal reversible capacity of 131.7 mAh g?1 after 400 cycles at 2 A g?1.展开更多
Due to the intrinsic advantages of nontoxicity, low-cost, and abundant resource of metallic zinc, aqueous zinc-ion batteries (ZIBs) have attracted universal interest [1,2]. Tremendous cathode materials have been explo...Due to the intrinsic advantages of nontoxicity, low-cost, and abundant resource of metallic zinc, aqueous zinc-ion batteries (ZIBs) have attracted universal interest [1,2]. Tremendous cathode materials have been exploited in aqueous ZIBs, such as manganese-based materials [3-11], Co-based materials [12,13] and vanadium-based materials [14-21].展开更多
Vanadium pentoxide, borax, boron carbide and sodium fluoride were used to grow vanadium carbide coating on surface of Crl2 steel at 950℃ by TD process. The coating of vanadium carbide （VC） extended the serve-life p...Vanadium pentoxide, borax, boron carbide and sodium fluoride were used to grow vanadium carbide coating on surface of Crl2 steel at 950℃ by TD process. The coating of vanadium carbide （VC） extended the serve-life period of Crl2 steel as punching die. Kinetics of vanadium carbide coating growth was brought forward and verified by comparison of the mathematical model with the experimental results. The thickness of coating was illustrated by SEM. The chemical constituent of coating and remnants were tested by X-ray diffraction （XRD） and X-ray energy dispersive spectroscopy （EDS）. To increase the thickness, rare earth silicon powder （FeSiRe23） was added to the borax salt bath. The analysis of XRD revealed that FeSiRe23 increased the depth of vanadium car-bide coating as reducing agent and catalysis.展开更多
基金financially supported by the Ministry of Land and Resources Public Welfare Industry Research Project, China (No. 201511062-02)
文摘Numerous studies have focused on the reduction thermodynamics of ordinary iron ore;by contrast, the literature contains few thermodynamic studies on the gas-based reduction of vanadium titano-magnetite (VTM) in mixed atmospheres of H2, CO, H2O, CO2, and N2. In this paper, thermodynamic studies on the reduction of oxidized VTM pellets were systematically conducted in an atmosphere of a C–H–O system as a reducing agent. The results indicate that VTM of an equivalent valence state is more difficult to reduce than ordinary iron ore. A reduction equilibrium diagram using the C–H–O system as a reducing agent was obtained;it clearly describes the reduction process. Experiments were performed to investigate the effects of the reduction temperature, the gas composition, and two types of iron ores on the reduction of oxidized VTM pellets. The results show that the final reduction degree increases with increasing reduction temperature, increasing molar ratio of H2/(H2 + CO), and decreasing H2O, CO2, and N2 contents. In addition, the reduction processes under various conditions are discussed. All of the results of the reduction experiments are consistent with those of theoretical thermodynamic analysis. This study is expected to provide valuable thermodynamic theory on the industrial applications of VTM.
基金financially supported by the National Natural Science Foundation of China (Nos. 51574082 and 51874077)the Fundamental Research Funds for the Central University of China (Nos. N150202001 and N172507012)
文摘The effect of microwave treatment on the grinding and dissociation characteristics of vanadium titano-magnetite(VTM) ore were investigated using scanning electron microscopy(SEM), nitrogen absorption measurements, particle size distribution measurements, X-ray diffraction(XRD) analysis, Fourier transform infrared(FT-IR) spectroscopic analysis, and magnetic separation. SEM analysis showed that microfractures appeared in the microwave-treated VTM, which is attributed to the microwaves' selective heating characteristic and the differential expansion between minerals and gangues. Nitrogen absorption showed that the microfractures were more pronounced when the microwave heating time was increased. Particle size distribution analysis showed that microwave treatment could improve the grindability of the VTM, thus increasing the weight percent of the fine-ground product. The increase in grindability was more significant with prolonged heating time. Moreover, the particle size distribution of the fine-ground product changed only slightly after the microwave treatment. XRD analysis showed that the crystallinity of the microwave-treated VTM increased with increasing microwave heating time. The magnetic separation tests revealed that the separation efficiency increased as a result of the intergranular fractures generated by microwave treatment. The Fe grade of the magnetic fraction of microwave-treated VTM was 1.72% higher than that of the raw ore. We concluded that the microwave treatment was beneficial, especially for the mineral processing characteristics.
基金financially supported by the Fundamental Research Funds for the Central Universities(2014zzts273)
文摘The reduction of vanadium titano-magnetite pellets by H_2-CO at temperatures from 850 to 1050°C was investigated in this paper. The influences of pre-oxidation treatment, reduction temperature, and V_（H_2）/（V_（H_2） ＋ VCO） on the metallization degree were studied. The results showed that pre-oxidation played a substantial role in the reduction of vanadium titano-magnetite pellets. During the reduction process, the metallization degree increased with increasing temperature and increasing V_（H_2） /（V_（H_2） ＋ VCO）. The phase transformation of pre-oxidized vanadium titano-magnetite pellets during the reduction process under an H_2 atmosphere and a CO atmosphere was discussed, and the reduced samples were analyzed by scanning electron microscopy（SEM） in conjunction with back scatter electron（BSE） imaging. The results show that the difference in thermodynamic reducing ability between H_2 and CO is not the only factor that leads to differences in the reduction results obtained using different atmospheres. Some of Fe_（3-x）Ti_xO_4 cannot be reduced under a CO atmosphere because of the densification of particles＇ structure and because of the enrichment of Mg in unreacted cores. By contrast, a loose structure of particles was obtained when the pellets were reduced under an H_2 atmosphere and this structure decreased the resistance to gas diffusion. Moreover, the phenomenon of Mg enrichment in unreacted cores disappeared during H_2 reduction. Both the lower resistance to gas diffusion and the lack of Mg enrichment facilitated the reduction of vanadium titano-magnetite.
基金Projects(51604069,51604049,U1508213) supported by the National Natural Science Foundation of ChinaProject(N162504004) supported by the Fundamental Research Funds for the Central Universities,ChinaProjects(2017YFB0603800,2017YFB0603801) supported by the National Key R&D Program of China
文摘In order to provide a reliable reference for utilizing Indonesia vanadium titano-magnetite(VTM) in blast furnace(BF) economically, metallurgical properties of iron ore sinter with addition of Indonesia VTM in mixed sintering materials were investigated, including low-temperature reduction degradation index(RDI), reducibility index(RI), and softening/melting properties. Additionally, influenced mechanism of Indonesia VTM on metallurgical properties of sinter was studied. It is found that adding Indonesia VTM in sintering process quickly increases the RDI of sinters, and decreases the RI from 78.02% to 68.43%. Moreover, both beginning temperature(T_4) and final temperature(TD) of softening/melting increase gradually, and cohesive zone temperature range(T_D–T_4) enlarges from 219 oC to 315 oC. As a result, the permeability of cohesive zone gets worse, which is proven by the higher maximum pressure drop(δPmax) in softening/melting experiments. It is concluded that, after comprehensively considering all metallurgical properties mentioned above, the proper proportion of Indonesia VTM in sintering process is proposed in the new raw materials conditions.
基金The authors acknowledge the support from the National Natural Science Foundation of China(62105185,62375157,52002196)Natural Science Foundation of Guangdong Province(2022A1515011516)+2 种基金Natural Science Foundation of Shandong Province(ZR2020QF084)Shandong Excellent Young Scientists Fund Program(Overseas,2022HWYQ-021)the Open Foundation of the State Key Laboratory of Featured Metal Materials and Life-Cycle Safety for Composite Structures,Guangxi University(2022GXYSOF06).
文摘Vanadates are a class of the most promising electrochromic materials for displays as their multicolor characteristics.However,the slow switching times and vanadate dissolution issues of recently reported vanadates significantly hinder their diverse practical applications.Herein,novel strategies are developed to design electrochemically stable vanadates having rapid switching times.We show that the interlayer spacing is greatly broadened by introducing sodium and lanthanum ions into V_(3)O_(8)interlayers,which facilitates the transportation of cations and enhances the electrochemical kinetics.In addition,a hybrid Zn^(2+)/Na^(+)electrolyte is designed to inhibit vanadate dissolution while significantly accelerating electrochemical kinetics.As a result,our electrochromic displays yield the most rapid switching times in comparison with any reported Zn-vanadate electrochromic displays.It is envisioned that stable vanadate-based electrochromic displays having video speed switching are appearing on the near horizon.
基金Natural Science Foundation of China,Grant/Award Number:22108042Guangzhou(202201020147)。
文摘BiVO_(4)is one of the most promising photoanode materials for photoelectrochemical(PEC)solar energy conversion,but it still suffers from poor photocurrent density due to insufficient light‐harvesting efficiency(LHE),weak photogenerated charge separation efficiency(Φ_(Sep)),and low water oxidation efficiency(Φ_(OX)).Herein,we tackle these challenges of the BiVO_(4)photoanodes using systematic engineering,including catalysis engineering,bandgap engineering,and morphology engineering.In particular,we deposit a NiCoO_(x)layer onto the BiVO_(4)photoanode as the oxygen evolution catalyst to enhance theΦ_(OX)of Fe‐g‐C_(3)N_(4)/BiVO_(4)for PEC water oxidation,and incorporate Fe‐doped graphite‐phase C_(3)N_(4)(Fe‐g‐C_(3)N_(4))into the BiVO_(4)photoanode to optimize the bandgap and surface areas to subsequently expand the light absorption range of the photoanode from 530 to 690 nm,increase the LHE andΦ_(Sep),and further improve the oxygen evolution reaction activity of the NiCoO_(x)catalytic layer.Consequently,the maximum photocurrent density of the as‐prepared NiCoO_(x)/Fe‐g‐C_(3)N_(4)/BiVO_(4)is remarkably boosted from 4.6 to 7.4 mA cm^(−2).This work suggests that the proposed systematic engineering strategy is exceptionally promising for improving LHE,Φ_(Sep),andΦ_(OX)of BiVO_(4)‐based photoanodes,which will substantially benefit the design,preparation,and large‐scale application of next‐generation high‐performance photoanodes.
基金supported by National Natural Science Foundation of China(Nos.51972346,51932011,51802356,and 51872334)Innovation-Driven Project of Central South University(No.2018CX004).
文摘Rechargeable aqueous zinc-ion batteries(AZIBs)have their unique advantages of cost efficiency,high safety,and environmental friendliness.However,challenges facing the cathode materials include whether they can remain chemically stable in aqueous electrolyte and provide a robust structure for the storage of Zn2+.Here,we report on H11Al2V6O23.2@graphene(HAVO@G)with exceptionally large layer spacing of(001)plane(13.36?).The graphene-wrapped structure can keep the structure stable during discharge/charge process,thereby promoting the inhibition of the dissolution of elements in the aqueous electrolyte.While used as cathode for AZIBs,HAVO@G electrode delivers ideal rate performance(reversible capacity of 305.4,276.6,230.0,201.7,180.6 mAh g?1 at current densities between 1 and 10 A g?1).Remarkably,the electrode exhibits excellent and stable cycling stability even at a high loading mass of^15.7 mg cm?2,with an ideal reversible capacity of 131.7 mAh g?1 after 400 cycles at 2 A g?1.
基金supported by the National Natural Science Foundation of China (Grant Nos. 51802356, 51872334 and 51572299)Innovation-Driven Project of Central South University (No. 2018CX004)
文摘Due to the intrinsic advantages of nontoxicity, low-cost, and abundant resource of metallic zinc, aqueous zinc-ion batteries (ZIBs) have attracted universal interest [1,2]. Tremendous cathode materials have been exploited in aqueous ZIBs, such as manganese-based materials [3-11], Co-based materials [12,13] and vanadium-based materials [14-21].
基金Funded by the National Natural Science Foundation of China (No.50675165)the National Key Technology R&D Program (No.2006BAF02A29)
文摘Vanadium pentoxide, borax, boron carbide and sodium fluoride were used to grow vanadium carbide coating on surface of Crl2 steel at 950℃ by TD process. The coating of vanadium carbide （VC） extended the serve-life period of Crl2 steel as punching die. Kinetics of vanadium carbide coating growth was brought forward and verified by comparison of the mathematical model with the experimental results. The thickness of coating was illustrated by SEM. The chemical constituent of coating and remnants were tested by X-ray diffraction （XRD） and X-ray energy dispersive spectroscopy （EDS）. To increase the thickness, rare earth silicon powder （FeSiRe23） was added to the borax salt bath. The analysis of XRD revealed that FeSiRe23 increased the depth of vanadium car-bide coating as reducing agent and catalysis.
