Influence of vapor pressure deficit on vegetation growth in China

Vapor pressure deficit(VPD)plays a crucial role in determining plant physiological functions and exerts a substantial influence on vegetation,second only to carbon dioxide(CO_(2)).As a robust indicator of atmospheric water demand,VPD has implications for global water resources,and its significance extends to the structure and functioning of ecosystems.However,the influence of VPD on vegetation growth under climate change remains unclear in China.This study employed empirical equations to estimate the VPD in China from 2000 to 2020 based on meteorological reanalysis data of the Climatic Research Unit(CRU)Time-Series version 4.06(TS4.06)and European Centre for Medium-Range Weather Forecasts(ECMWF)Reanalysis 5(ERA-5).Vegetation growth status was characterized using three vegetation indices,namely gross primary productivity(GPP),leaf area index(LAI),and near-infrared reflectance of vegetation(NIRv).The spatiotemporal dynamics of VPD and vegetation indices were analyzed using the Theil-Sen median trend analysis and Mann-Kendall test.Furthermore,the influence of VPD on vegetation growth and its relative contribution were assessed using a multiple linear regression model.The results indicated an overall negative correlation between VPD and vegetation indices.Three VPD intervals for the correlations between VPD and vegetation indices were identified:a significant positive correlation at VPD below 4.820 hPa,a significant negative correlation at VPD within 4.820–9.000 hPa,and a notable weakening of negative correlation at VPD above 9.000 hPa.VPD exhibited a pronounced negative impact on vegetation growth,surpassing those of temperature,precipitation,and solar radiation in absolute magnitude.CO_(2) contributed most positively to vegetation growth,with VPD offsetting approximately 30.00%of the positive effect of CO_(2).As the rise of VPD decelerated,its relative contribution to vegetation growth diminished.Additionally,the intensification of spatial variations in temperature and precipitation accentuated the spatial heterogeneity in the impact of VPD on vegetation growth in China.This research provides a theoretical foundation for addressing climate change in China,especially regarding the challenges posed by increasing VPD.

Differential pressure difference based altitude control of a stratospheric satellite

An autonomous altitude adjustment system for a stratospheric satellite(StratoSat)platform is proposed.This platform consists of a helium balloon,a ballonet,and a two-way blower.The helium balloon generates lift to balance the platform gravity.The two-way blower inflates and deflates the ballonet to regulate the buoyancy.Altitude adjustment is achieved by tracking the differential pressure difference(DPD),and a threshold switching strategy is used to achieve blower flow control.The vertical acceleration regulation ability is decided not only by the blower flow rate,but also by the designed margin of pressure difference(MPD).Pressure difference is a slow-varying variable compared with altitude,and it is adopted as the control variable.The response speed of the actuator to disturbance can be delayed,and the overshoot caused by the large inertia of the platform is inhibited.This method can maintain a high tracking accuracy and reduce the complexity of model calculation,thus improving the robustness of controller design.

Clipping Effect on Growth and Plant Water Use Response to Diurnal Variation of Vapor Pressure Deficit in Cenchrus biflorus Roxb

Cenchrus biflorus called Karangiya in the Hausa language is an annual pastoral grass which is a valuable herbaceous fodder in dry land region in the context of climate change. However, little is known about the plant water use under the effects of cut in West Africa Sahel like Niger where the plant is a multipurpose grass species. Therefore, this study investigated the impact of grazing (simulated by shoot cuts) on biomass production. Cenchrus biflorus Roxb was grown on field plots and in pots and subjected to shoot cuts at different levels (3 cm and 5 cm from soil surface). The effect of shoot cuts on drought tolerance was evaluated by assessing the response of transpiration to the diurnal variation of vapor pressure deficit (VPD). Results showed that the biomass production varied in response to shoot cuts depending on the culture system, and the level or frequency of cuts. The mean biomass production increased significantly especially in field plots for 5 cm cuts compared to those at 3 cm and the control treatment. In addition, transpiration was highly increased in response to the VPD increase. Shoot cuts significantly reduced transpiration, whatever the level, largely because they reduced leaf surface. We concluded that moderate grazing (cuts to 5cm) can improve biomass production and allow better adaptation to water deficit as they significantly reduced water loss through transpiration. The study recommends the cropping of the Cenchrus biflorus as climate solution as it performs better under water deficit for improving grazing resilience in Niger.

Evaluation of surface temperature and pressure derived from MERRA-2 and ERA5 reanalysis datasets and their applications in hourly GNSS precipitable water vapor retrieval over China

Temperature and pressure play key roles in Global Navigation Satellite System(GNSS) precipitable water vapor(PWV) retrieval. The National Aeronautics and Space Administration(NASA) and European Center for Medium-Range Weather Forecasts(ECMWF) have released their latest reanalysis product: the modern-era retrospective analysis for research and applications, version 2(MERRA-2) and the fifthgeneration ECMWF reanalysis(ERA5), respectively. Based on the reanalysis data, we evaluate and analyze the accuracy of the surface temperature and pressure products in China using the the measured temperature and pressure data from 609 ground meteorological stations in 2017 as reference values.Then the accuracy of the two datasets and their performances in estimating GNSS PWV are analyzed. The PWV derived from the pressure and temperature products of ERA5 and MERRA-2 has high accuracy. The annual average biases of pressure and temperature for ERA5 are-0.07 hPa and 0.45 K, with the root mean square error(RMSE) of 0.95 hPa and 2.04 K, respectively. The annual average biases of pressure and temperature for MERRA-2 are-0.01 hPa and 0.38 K, with the RMSE of 1.08 h Pa and 2.66 K, respectively.The accuracy of ERA5 is slightly higher than that of MERRA-2. The two reanalysis data show negative biases in most regions of China, with the highest to lowest accuracy in the following order: the south,north, northwest, and Tibet Plateau. Comparing the GNSS PWV calculated using MERRA-2(GNSS MERRA-2 PWV) and ERA5(GNSS ERA5 PWV) with the radiosonde-derived PWV from 48 co-located GNSS stations and the measured PWV of the co-location radiosonde stations, it is found that the accuracy of GNSS ERA5 PWV is better than that of GNSS MERRA-2 PWV. These results show the different applicability of surface temperature and pressure products from MERRA-2 and ERA5 data, indicating that both have important applications in meteorological research and GNSS water vapor monitoring in China.

Minor Pressure Differences within the Fontan-Anastomosis in Patients with Total Cavopulmonary Connection by 4D-Flow Magnetic Resonance Imaging

Background: Pressure measurement in total cavopulmonary connection (TCPC) patients is a domain of cardiaccatheterization. 4D velocity encoded cardiovascular magnetic resonance (4D–flow MRI) offers an alternative forassessment of even minor pressure differences. The scope of this study was to measure even minor pressure differencesin the anastomosis of TCPC patients, who are clinically uncompromised. Methods: Twenty-four patients(median 15 years [8;34]) with TCPC were studied prospectively by 4D-flow MRI. Pressure differences betweensuperior vena cava (SVC) and extracardiac conduit (C) to both right pulmonary artery (RPA) and left pulmonaryartery (LPA) were assessed. Small fluid obstructions as vortices within the anastomosis were detected by flowpathlines from 4D-flow MRI. In two patients pressure differences were calculated also by computational flowdynamics (CFD) as a plausibility check for the order of magnitude. Results: Median values of pressure differencesin the anastomosis between SVC and RPA were 0.63 (0.21–2.1) mmHg, between C and RPA 0.67 (0.3–2.2)mmHg, between SVC and LPA 0.8 (0.3–2.4) mmHg and between C and LPA 0.7 (0.2–1.9) mmHg. Patients withpotential flow obstruction (stents, occluder, vortices) had significantly higher gradients at the anastomosis (p <0.05) than patients without potential obstructions, although the absolute values were small. CFD- and measurement-based pressure difference showed good agreement. Conclusion: 4D-flow MRI is able to detect minor pressuredifferences within the Fontan circuit even in patients with apparently satisfactory TCPC. Slightly higherpressure differences are due to the presence of small flow obstruction.

In Tube Condensation:Changing the Pressure Drop into a Temperature Difference for a Wire-on-Tube Heat Exchanger

A theoretical study based on the Penalty factor(PF)method by Cavallini et al.is conducted to show that the pressure drop occurring in a wire-on-tube heat exchanger can be converted into a temperature difference for two types of refrigerants R-134a and R-600a typically used for charging refrigerators and freezers.The following conditions are considered:stratified or stratified-wavyflow condensation occurring inside the smooth tube of a wire-on-tube condenser with diameter 3.25,4.83,and 6.299 mm,condensation temperatures 35℃,45℃,and 54.4℃ and cover refrigerant massflow rate spanning the interval from 1 to 7 kg/hr.The results show that the PF variation is not linear with vapor quality and attains a maximum when the vapor quality is 0.2 and 0.18 for the R-134a and R-600a refrigerants,respectively.The PF increases with the refrigerant massflow rate if the inner diameter and saturation temperature constant,and it decreases on increasing the inner diameter to 6.299 mm for constant refrigerant massflow rate and saturation temperature.The PF for R-600a is higher than that for R-134a due to the lower saturation pressure in thefirst case.Furthermore,a stratifiedflow produces higher PF in comparison to the annularflow due to the effect of the surface tension.

Vapor pressure measurement of lead and lead chlorides in FeO_T-CaO-SiO_2-Al_2O_3 system

Vapor pressure of lead and lead chlorides from FeOT？CaO？SiO2？Al2O3 slag system was measured by using Knudsen effusion method. The results suggest that the vapor pressures of lead and lead chlorides increase with increasing temperature. For the slag systems without chlorine, the logarithm of vapor pressure （lnp） shows highly linear dependency on the reciprocal of temperature （1/T）, and higher vapor pressure is observed in the condition where more metallic lead vapor is formed. In this case, the vapor pressure of lead increases with increasing slag basicity （w（CaO）/w（SiO2））, increasing FeO content andw（Fe2＋）/w（Fe3＋） ratio. For the case of slag system with chlorine addition, the total pressures of PbCl2 and PbCl increase with decreasing basicity and FeO content of slag.

Validation of the Relationship between Precipitable Water and Surface Vapor Pressure by Means of Reanalysis Data

By means of ERA-40, JRA-25, NCEP/NCAR and NCEP/DOE reanalysis data, empirical relations between precipitable water and surface vapor pressure in spatial and temporal scale were calculated. The reliabilities of precipitable water from reanalysis data were validated based on comparing different W-e empirical relations of various reanalysis data, in order to provide basis and reference for reasonable application. The results showed that W-e empirical relation of ERA-40 was closest to that of sounding data in China, and precipitable water from ERA-40 was the most credible. The worldwide comparison among W-e empirical relations of four reanalysis data showed that there was little difference in annual mean W-e empirical relations in the middle latitudes and great differences in low and high latitudes. Seasonal mean W-e empirical relations in the middle latitudes of the northern Hemisphere had little difference in spring, autumn and winter, but great difference in summer. Therefore, the reliabilities of precipitable water from reanalysis data in spring, autumn and winter in the middle latitudes of the northern hemisphere were higher than other areas and seasons. W-e empirical relations of NCEP/NCAR and NCEP/DOE had good stability in different years, while there was poor stability in ERA-40 and JRA-25.

Improved finite difference method for pressure distribution of aerostatic bearing

An improved finite difference method （FDM）is described to solve existing problems such as low efficiency and poor convergence performance in the traditional method adopted to derive the pressure distribution of aerostatic bearings. A detailed theoretical analysis of the pressure distribution of the orifice-compensated aerostatic journal bearing is presented. The nonlinear dimensionless Reynolds equation of the aerostatic journal bearing is solved by the finite difference method. Based on the principle of flow equilibrium, a new iterative algorithm named the variable step size successive approximation method is presented to adjust the pressure at the orifice in the iterative process and enhance the efficiency and convergence performance of the algorithm. A general program is developed to analyze the pressure distribution of the aerostatic journal bearing by Matlab tool. The results show that the improved finite difference method is highly effective, reliable, stable, and convergent. Even when very thin gas film thicknesses （less than 2 Win）are considered, the improved calculation method still yields a result and converges fast.

Response of stomatal conductance of two tree species to vapor pressure deficit in three climate zones

Stomatal behavior is a central topic of plant ecophysiological research under global environmental change. However, the physiological mechanism controlling the response of stomata to vapor pressure deficit （VPD） or relative humidity （RH） has been inadequately understood till now. In this study, responses of stomatal conduc- tance （gs） to VPD in two species of trees （Fraxinus chinensis Roxb., Populus alba L. var. pyramidalis Bge.）in three different climate zones （Jinan with typical warm humid/semi-humid climate, Urumqi with temperate continental arid climate and Turpan with extreme arid desert climate） were measured. Levels of two phytohormones （abscisic acid, ABA; indole-3-acetic acid, IAA） in the leaves of the two tree species at these three sites were also measured by high performance liquid chromatography. The results showed that the responses of gs to an increasing VPD in these two tree species at the three sites had peak curves which could be fitted with a Log Normal Model （gs=a.exp（-O.5（In（DIc）lb）2）. The VPD/RH values corresponding to the maximum g, can be calculated using the fitting models for the two tree species in the three sites. We found that the calculated g, -VPD correlated nega- tively with relative air humidity in the three sites during the plant growth period （April to October 2010）, which showed the values of g,-max-VPD were related to the climate conditions. The prevailing empirical stomatal model （Leuning model） and optimal stomatal behavior model could not properly simulate our measured data. The water use efficiency in the two tree species did not show obvious differences under three very different climatic conditions, but the highest gs, photosynthetic and transpiration rates occurred in P. alba var. of Turpan. The sensitivity in re- sponse of g~ to VPD in leaves of the two trees showed positive correlations with the concentration of ABA, which implied that ABA level could be used as an indicator of the sensitivity of stomatal response to VPD. Our results confirmed that the prediction of the response of gs to VPD might be incomplete in the two current popular models. Therefore, an improved g, model which is able to integrate the results is needed. Also, the stomatal response mechanism of single peak curves of g~ to VPD should be considered.

Determination of Vapor Pressures for Binary and Ternary Mixtures Containing Ionic Liquid 1-propyl-3-methylimidazolium Bromide

Vapor pressure values of binary systems water ＋ ethanol, water ＋ ionic liquid 1-propyl-3- methylimidazolium bromide （[PMIM] [Br]）, ethanol ＋ [PMIM] [Br] and ternary system water ＋ ethanol ＋ [PMIM] [Br] at different temperatures were measured by using a modified boiling point method in various concentrations of （16.66%, 33.7%）, （17.4%, 33.9%） and （16.5%, 32%） mass percent of ionic liquid, respectively. The experimental vapor pressures of solvent were well correlated by the Antoine-type equation, and the overall average absolute deviation （AAD） was found to be 0.39%. The experimental results for mixtures containing ionic liquid indicate that the vapor pressure of the solvents can be decreased noticeably to different extent due to the affinity difference between ionic liquid and solvent, which is similar to the salt effect of common inorganic salts. As a result, ionic liquid may find industrial applications in extractive distillations for the system with a low separation factor or even for an azeotropic mixture.

Measurement and Prediction of Vapor Pressure for H20 ＋ CHaOH] C2HsOH ＋ [BMIM][DBP] Ternary Working Fluids

The ionic liquid, 1-butyl-3-methylimidazolium dibutylphosphate ([BMIM][DBP]) was prepared and the vapor pressures of three set of binary solutions H2O(1)/CH3OH(1)/C2H5OH(1) + [BMIM][DBP](2) were measured at different temperature and in the ILs mole fraction range from 0.1 to 0.6 with a static equilibrium apparatus. The measured vapor pressures were correlated with Non-Random Two Liquid (NRTL) activity coefficient model and the average relative deviations (ARD) between experimental and correlated vapor pressures for these binary solutions were 3.19%, 2.42% and 2.95%, respectively. Then, the vapor pressures of two set of ternary solutions H2O(1) + CH3OH(2)/C2H5OH(2) + [BMIM][DBP](3) were measured with an inclined boiling apparatus and further predicted with NRTL activity coefficient model based on the binary interaction parameters coming from fitting the vapor pressures of the binary solutions. The results indicated that the ternary solutions containing [BMIM][DBP] were shown a strong negative deviation from Raoult's Law when the mole fraction of [BMIM][DBP] was larger than 0.2, which meant that ternary solutions could absorb the refrigerant vapors at the same or below solution temperature. Meanwhile, the average relative deviations between experimental and predicted vapor pressures for ternary solutions were 2.92% and 3.06%, respectively. Consequently, the NRTL active coefficient model used for non-electrolyte solutions was still valid for predicting vapor-liquid equilibrium of binary or ternary solutions containing ILs.

Vapor Pressure, Vaporization Enthalpy, Standard Enthalpy of Formation and Standard Entropy of n-Butyl Carbamate

The vapor pressures of n-butyl carbamate were measured in the temperature range from 372.37 K to 479.27 K and fitted with Antoine equation. The compressibility factor of the vapor was calculated with the Virial equation and the second virial coefficient was determined by the Vetere model. Then the standard enthalpy of vaporization for n-butyl carbamate was estimated. The heat capacity was measured for the solid state(299.39–324.2 K) and liquid state(336.65–453.21 K) by means of adiabatic calorimeter. The standard enthalpy of formation ΔfH[crystal(cr),298.15 K] and standard entropy S(crystal,298.15 K) of the substance were calculated on the basis of the gas-phase standard enthalpy of formation ΔfH(g,298.15 K)and gas-phase standard entropy S(g,298.15 K), which were estimated by the Benson method. The results are acceptable, validated by a thermochemical cycle.

A fast explicit finite difference method for determination of wellhead injection pressure

A fast explicit finite difference method (FEFDM),derived from the differential equations of one-dimensional steady pipe flow,was presented for calculation of wellhead injection pressure.Recalculation with a traditional numerical method of the same equations corroborates well the reliability and rate of FEFDM.Moreover,a flow rate estimate method was developed for the project whose injection rate has not been clearly determined.A wellhead pressure regime determined by this method was successfully applied to the trial injection operations in Shihezi formation of Shenhua CCS Project,which is a good practice verification of FEFDM.At last,this method was used to evaluate the effect of friction and acceleration terms on the flow equation on the wellhead pressure.The result shows that for deep wellbore,the friction term can be omitted when flow rate is low and in a wide range of velocity the acceleration term can always be deleted.It is also shown that with flow rate increasing,the friction term can no longer be neglected.

FINITE DIFFERENCE MODEL FOR SIMULATION OF DENSIFYING CARBON-CARBON COMPOSITES BY CHEMICAL VAPOR INFILTRATIONP ROCESSES

A finite difference (FD) model is proposed to simulate the chemical vapor infiltration (CVI) processes for fabrication of carbon carbon composites. With iterative operation of many discrete values, the FD based model can be used to describe and analyze the real, continuous densification processing quantitatively. Many densification characteristics of carbon carbon composites can be predicated by modeling. The prediction results can be compared with experiment value directly, which shows its good ability for practical application. Special verification experiments are designed with Iso thermal CVI processing and slender cylindroid unidirectional C/C composites are prepared to verify the accuracy of the model. The modeling curve of density versus infiltration time is in good agreement with experiment values. According to modeling analysis, the effects of infiltration temperature and fiber volume fraction on densification are also discussed preliminarily. The conclusion obtained also accords with experiment or results in other literature, further approving the accuracy of the FD based model.

Spatio-temporal variation in transpiration responses of maize plants to vapor pressure deficit under an arid climatic condition

The transpiration rate of plant is physically controlled by the magnitude of the vapor pressure deficit（VPD） and stomatal conductance. A limited-transpiration trait has been reported for many crop species in different environments, including Maize（Zea mays L.）. This trait results in restricted transpiration rate under high VPD, and can potentially conserve soil water and thus decrease soil water deficit. However, such a restriction on transpiration rate has never been explored in maize under arid climatic conditions in northwestern China. The objective of this study was to examine the transpiration rate of field-grown maize under well-watered conditions in an arid area at both leaf and whole plant levels, and therefore to investigate how transpiration rate responding to the ambient VPD at different spatial and temporal scales. The transpiration rates of maize at leaf and plant scales were measured independently using a gas exchange system and sapflow instrument, respectively. Results showed significant variations in transpiration responses of maize to VPD among different spatio-temporal scales. A two-phase transpiration response was observed at leaf level with a threshold of 3.5 k Pa while at the whole plant level, the daytime transpiration rate was positively associated with VPD across all measurement data, as was nighttime transpiration response to VPD at both leaf and whole plant level, which showed no definable threshold vapor pressure deficit, above which transpiration rate was restricted. With regard to temporal scale, transpiration was most responsive to VPD at a daily scale, moderately responsive at a half-hourly scale, and least responsive at an instantaneous scale. A similar breakpoint（about 3.0 k Pa） in response of the instantaneous leaf stomatal conductance and hourly canopy bulk conductance to VPD were also observed. At a daily scale, the maximum canopy bulk conductance occurred at a VPD about 1.7 k Pa. Generally, the responsiveness of stomatal conductance to VPD at the canopy scale was lower than that at leaf scale. These results indicate a temporal and spatial heterogeneity in how maize transpiration responses to VPD under arid climatic conditions. This could allow a better assessment of the possible benefits of using the maximum transpiration trait to improve maize drought tolerance in arid environment, and allow a better prediction of plant transpiration which underpin empirical models for stomatal conductance at different spatio-temporal scales in the arid climatic conditions.

Moderators of occupational pressure in female health professionals—Individual differences and coping skills

Individual differences and coping skills have influential impacts on stress process by influencing the eventual outcomes of the stressors, contributing to either wellbeing, or illness and negative experiences. The aim of this paper is to explore the individual differences and coping strategies of a cohort of women with health professionals’ occupational pressure. This is a cross-sectional survey, informed by the transactional model of stress and coping framework, and carried out on women health professionals (n = 203) from the Kuala Lumpur Hospital. Multiple regressions were conducted to examine the potential moderators of stress. Women Health Professionals reported stress with six out of eight organizational sources of pressure, with relationship being a key stressor. Their individual differences (mean + SD) were characterised by low drive (7.6 + 1.9-8.2 + 2.0), low personal influence (10.8 + 2.0 to 11.7 + 2.3), moderate control (13.4 + 3.4 to 16.3 + 2.4), and high impatience behaviour (19.1 + 3.8 to 20.4 + 3.3). With Coping strategy, the Life-work-balance coping is a significant positive predictor for five out of the nine outcomes of occupational pressure [state of mind (p ress management guideline to ameliorate stress amongst those vulnerable workers. Future studies to examine individual differences of these female-dominated professions across health setting are needed to better inform the pressure-at-work issues for the increasing Asian women health professionals.

Vapor Pressure Measurement and Correlation of 2-Methyl-Butanol Acetate Containing Calcium Chloride

The CaCl2 solubility in 2-methyl-butanol acetate and the vapor pressure of 2-methyl-butanol acetate containing CaCl2 were measured in the range of 90-135°C and from very low salt concentration to saturation.The experimental data were correlated with two equations,a modified Antoine equation with the dissolved salt taken into account and a nonrandom two liquid-electrolyte（e-NRTL）model.Both models are in good agreement with the experimental data.This study provides essential physical data for further investigation of vapor-liquid equilibrium system containing salt.

Effects of temperature and pressure differences on water seepage in breccia

Effects of temperature and pressure differences on water seepage in breccia were investigated by using the physicochemical seepage instrument.The results show that the relationship of flow and pressure differences can be expressed by a linear equation,and the seepage coefficient is linearly correlated with temperature.The relation-ship between seepage flow and temperature could be described with the linear equation.The constant and tempera-ture seepage coefficient showed a linear relation with pressure.Binary quantitative equation for the seepage flow,temperature and pressure was obtained,and explained with experimental data and theoretical analysis.

Vapor pressure and thermochemical properties of ZrCl4 for ZrC coating of coated fuel particles

Vapor pressure of zirconium tetrachloride(ZrCl4) under vacuum and an argon pressure of 1×105 Pa was measured. The thermochemical changes of ZrCl4 during evaporation were studied by thermogravimetry-differential thermal analysis(TG-DTA), X-ray diffractometry(XRD), scanning electron microscopy(SEM) and energy-dispersive X-ray(EDX) analysis. At the same temperature, vapor pressures of ZrCl4 under vacuum and an argon pressure of 1×105 Pa are approximately the same. The vapor pressure exceeds 1×105 Pa at 340 ℃, which is high enough for ZrC coating of coated fuel particles. ZrCl4 sample is hydrolyzed to some extent to give ZrO2 and HCl, which however, has little influence on vapor pressure of ZrCl4 at high temperature. No ZrCl3 and Cl2 are produced by decomposition of ZrCl4 during evaporation, which is confirmed by thermodynamic calculation.