Synthesis and Design of Distillation Columns for Wide-Boiling Binary Mixtures with Vapor Recompression Heat Pumps

The vapor recompression heat pump(VRHP) distillation technology offers significant improvements in energy efficiency for distillation systems with small temperature differences between the top and bottom of the column. However, the separation of wide-boiling binary mixtures leads to substantial temperature differences between the top and bottom of the column. This limits the applicability of conventional VRHP due to high capital costs and strict performance requirements of the compressor. To overcome these challenges and to accommodate compressor operating conditions, a novel synthesis and design method is introduced to integrate VRHPs with wide-boiling binary mixture distillation columns(WBMDCs). This method enables quick determination of an initial configuration for the integrated WBMDC-VRHP system and helps identify the optimum configuration with the minimum total annual cost. Two examples, namely the separation of benzene/toluene and isopropanol/chlorobenzene, are employed to derive optimum configurations of the WBMDC-VRHP and compare them with the WBMDC. A systematic comparison between the WBMDC-VRHP and WBMDC demonstrates the superior steady-state performance and economic efficiency of the WBMDC-VRHP.

Configuring topologically optimum vapor recompressed dividing-wall distillation columns to maximize operating efficiency

For dividing-wall distillation columns(DWDCs) separating a heavy-component dominated and wide boiling-point ternary(HCDWBT) mixture, a significant amount of excessive heat exists inevitably in stripping the heavy-component from the intermediate-component and it can be employed to initiate the development of vapor recompression heat pump(VRHP) assisted DWDC(VRHP-DWDC). Despite dividing wall may locate in the top, middle, and bottom, the optimum VRHP-DWDC is found to involve uniformlytwo VRHP circles. While the first one serves to compress and transform the excessive heat resulted from the separation of the heavy-component from the intermediate-component, the second one to compress and transform the overhead vapor stream of the light-component pre-heated sequentially with the condensate from the first one and the bottom product stream of the heavy-component, both releasing the temperature-elevated latent heat to the pre-fractionator's or common stripping section. The processing of two HCDWBT mixtures of benzene/toluene/o-xylene and n-pentane/n-hexane/n-heptane are selected to assess the derived optimum topological configurations of the VRHP-DWDC and their optimality is confirmed through detailed comparisons with the DWDC and two VRHP-DWDCs involving only one VRHP circle. The proposed strategy helps to tap the full potential of the VRHP-DWDC with considerably alleviated complication in process development.

Vapor recompressed dividing-wall distillation columns:Structure and performance

Due to the topological structure of double columns and multiple separating sections in dividing-wall distillation columns(DWDCs),the development of vapor recompressed dividing-wall distillation columns(DWDC-VRHPs)represents a challenging issue with great complexities and tediousness.For the separations of light-component dominated and wide boiling-point ternary mixtures,because the purification of the light-component from the intermediate-and heavy-components incurs the primary energy dissipation,the application of vapor recompressed heat pumps(VRHP)should be aimed to reduce the irreversibility and this leads to the generation of the optimum topological structures of the DWDC-VRHPs,i.e.,a DWDC plus a two-stage VRHP.The first-stage VRHP is to preheat feed,not only taking the advantages of the small temperature elevation available but also favoring the mass transfer between the vapor and liquid phases through feed splitting.The second-stage VRHP is to reduce further separation irreversibility.The philosophy can be applied to any DWDCs no matter where the dividing wall locates.Two case studies on the separations of ternary mixtures of benzene,toluene,and o-xylene and n-pentane,n-hexane,and n-heptane demonstrate the economic optimality of the proposed DWDC-VRHPs and reveal the inherent interplay between internal and external process integration.